The DOI matches its Crossref record; 82 of the 82 references it cites were found in a registry or an index.
Emergence of 3D Printed Dosage Forms: Opportunities and Challenges
Open accessAbstract
The recent introduction of the first FDA approved 3D-printed drug has fuelled interest in 3D printing technology, which is set to revolutionize healthcare. Since its initial use, this rapid prototyping (RP) technology has evolved to such an extent that it is currently being used in a wide range of applications including in tissue engineering, dentistry, construction, automotive and aerospace. However, in the pharmaceutical industry this technology is still in its infancy and its potential yet to be fully explored. This paper presents various 3D printing technologies such as stereolithographic, powder based, selective laser sintering, fused deposition modelling and semi-solid extrusion 3D printing. It also provides a comprehensive review of previous attempts at using 3D printing technologies on the manufacturing dosage forms with a particular focus on oral tablets. Their advantages particularly with adaptability in the pharmaceutical field have been highlighted, which enables the preparation of dosage forms with complex designs and geometries, multiple actives and tailored release profiles. An insight into the technical challenges facing the different 3D printing technologies such as the formulation and processing parameters is provided. Light is also shed on the different regulatory challenges that need to be overcome for 3D printing to fulfil its real potential in the pharmaceutical industry.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Review of Additive Manufacturing
Wong, K. V., & Hernandez, A. (2012) · ISRN Mechanical Engineering · doi:10.5402/2012/208760 · Cited by 2,555
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
Additive manufacturing and its societal impact: a literature review
Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4558-5 · Cited by 1,862
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., & Das, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.057 · Cited by 1,563
A comparison of rapid prototyping technologies
Pham, D. T., & Gault, R. S. (1998) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(97)00137-5 · Cited by 915
Application of inkjet printing to tissue engineering
Boland, T., Xu, T., Damon, B., & Cui, X. (2006) · Biotechnology Journal · doi:10.1002/biot.200600081 · Cited by 783
Three‐dimensional printing of porous ceramic scaffolds for bone tissue engineering
Seitz, H., Rieder, W., Irsen, S., Leukers, B., & Tille, C. (2005) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30291 · Cited by 742
Effect of geometry on drug release from 3D printed tablets
Goyanes, A., Robles Martinez, P., Buanz, A., Basit, A. W., & Gaisford, S. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.04.069 · Cited by 667
Tan, K. H., Chua, C. K., Leong, K. F., Cheah, C. M., Cheang, P., Abu Bakar, M. S., & Cha, S. W. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00131-5 · Cited by 625
Khaled, S. A., Burley, J. C., Alexander, M. R., Yang, J., & Roberts, C. J. (2015) · Journal of Controlled Release · doi:10.1016/j.jconrel.2015.09.028 · Cited by 606
Bioresorbable Airway Splint Created with a Three-Dimensional Printer
Zopf, D. A., Hollister, S. J., Nelson, M. E., Ohye, R. G., & Green, G. E. (2013) · New England Journal of Medicine · doi:10.1056/nejmc1206319 · Cited by 589
Fused-filament 3D printing (3DP) for fabrication of tablets
Goyanes, A., Buanz, A. B. M., Basit, A. W., & Gaisford, S. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2014.09.044 · Cited by 587
Use of stereolithography to manufacture critical‐sized 3D biodegradable scaffolds for bone ingrowth
Cooke, M. N., Fisher, J. P., Dean, D., Rimnac, C., & Mikos, A. G. (2003) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.10485 · Cited by 571
3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets
Goyanes, A., Buanz, A. B. M., Hatton, G. B., Gaisford, S., & Basit, A. W. (2015) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2014.12.003 · Cited by 570
Skowyra, J., Pietrzak, K., & Alhnan, M. A. (2015) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2014.11.009 · Cited by 530
Self-citationDesktop 3D printing of controlled release pharmaceutical bilayer tablets
Khaled, S. A., Burley, J. C., Alexander, M. R., & Roberts, C. J. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2013.11.021 · Cited by 511
Goyanes, A., Wang, J., Buanz, A., Martínez-Pacheco, R., Telford, R., Gaisford, S., & Basit, A. W. (2015) · Molecular Pharmaceutics · doi:10.1021/acs.molpharmaceut.5b00510 · Cited by 511
3D printing of tablets containing multiple drugs with defined release profiles
Khaled, S. A., Burley, J. C., Alexander, M. R., Yang, J., & Roberts, C. J. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.07.067 · Cited by 508
A poly(d,l-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.03.055 · Cited by 437
A flexible-dose dispenser for immediate and extended release 3D printed tablets
Pietrzak, K., Isreb, A., & Alhnan, M. A. (2015) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2015.07.027 · Cited by 407
Self-citationFundamentals of Selective Laser Melting of alloyed steel powders
Rombouts, M., Kruth, J. P., Froyen, L., & Mercelis, P. (2006) · CIRP Annals · doi:10.1016/s0007-8506(07)60395-3 · Cited by 400
Wu, C., Luo, Y., Cuniberti, G., Xiao, Y., & Gelinsky, M. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.03.009 · Cited by 363
Solid free-form fabrication of drug delivery devices
Wu, B. M., Borland, S. W., Giordano, R. A., Cima, L. G., Sachs, E. M., & Cima, M. J. (1996) · Journal of Controlled Release · doi:10.1016/0168-3659(95)00173-5 · Cited by 361
Ceramic components manufacturing by selective laser sintering
Bertrand, P., Bayle, F., Combe, C., Goeuriot, P., & Smurov, I. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.08.085 · Cited by 351
Oral dosage forms fabricated by Three Dimensional Printing™
Katstra, W. E., Palazzolo, R. D., Rowe, C. W., Giritlioglu, B., Teung, P., & Cima, M. J. (2000) · Journal of Controlled Release · doi:10.1016/s0168-3659(99)00225-4 · Cited by 334
Stereolithography in tissue engineering
Skoog, S. A., Goering, P. L., & Narayan, R. J. (2014) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-013-5107-y · Cited by 321
Additive Processing of Polymers
Wendel, B., Rietzel, D., Kühnlein, F., Feulner, R., Hülder, G., & Schmachtenberg, E. (2008) · Macromolecular Materials and Engineering · doi:10.1002/mame.200800121 · Cited by 314
Selective Laser Sintering of PEEK
Schmidt, M., Pohle, D., & Rechtenwald, T. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.05.097 · Cited by 305
Melocchi, A., Parietti, F., Loreti, G., Maroni, A., Gazzaniga, A., & Zema, L. (2015) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2015.07.016 · Cited by 299
Parents' Medication Administration Errors: Role of Dosing Instruments and Health Literacy
Yin, H. S., Mendelsohn, A. L., Wolf, M. S., Parker, R. M., Fierman, A., van Schaick, L., Bazan, I. S., Kline, M. D., & Dreyer, B. P. (2010) · Archives of Pediatrics & Adolescent Medicine · doi:10.1001/archpediatrics.2009.269 · Cited by 273
Schiele, J. T., Quinzler, R., Klimm, H.-D., Pruszydlo, M. G., & Haefeli, W. E. (2013) · European Journal of Clinical Pharmacology · doi:10.1007/s00228-012-1417-0 · Cited by 264
Personalised dosing: Printing a dose of one’s own medicine
Alomari, M., Mohamed, F. H., Basit, A. W., & Gaisford, S. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2014.12.006 · Cited by 257
Multimechanism oral dosage forms fabricated by three dimensional printing™
Rowe, C. W., Katstra, W. E., Palazzolo, R. D., Giritlioglu, B., Teung, P., & Cima, M. J. (2000) · Journal of Controlled Release · doi:10.1016/s0168-3659(99)00224-2 · Cited by 255
Three-dimensional drug printing: A structured review
Ursan, I. D., Chiu, L., & Pierce, A. (2013) · Journal of the American Pharmacists Association · doi:10.1331/japha.2013.12217 · Cited by 227
Low temperature direct 3D printed bioceramics and biocomposites as drug release matrices
Gbureck, U., Vorndran, E., Müller, F. A., & Barralet, J. E. (2007) · Journal of Controlled Release · doi:10.1016/j.jconrel.2007.06.022 · Cited by 213
Inkjet printing of drug substances and use of porous substrates‐towards individualized dosing
Sandler, N., Määttänen, A., Ihalainen, P., Kronberg, L., Meierjohann, A., Viitala, T., & Peltonen, J. (2011) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.22526 · Cited by 213
Adult rat retinal ganglion cells and glia can be printed by piezoelectric inkjet printing
Lorber, B., Hsiao, W.-K., Hutchings, I. M., & Martin, K. R. (2013) · Biofabrication · doi:10.1088/1758-5082/6/1/015001 · Cited by 207
Preparation of Personalized-dose Salbutamol Sulphate Oral Films with Thermal Ink-Jet Printing
Buanz, A. B. M., Saunders, M. H., Basit, A. W., & Gaisford, S. (2011) · Pharmaceutical Research · doi:10.1007/s11095-011-0450-5 · Cited by 202
Inkjet printing of transdermal microneedles for the delivery of anticancer agents
Uddin, M. J., Scoutaris, N., Klepetsanis, P., Chowdhry, B., Prausnitz, M. R., & Douroumis, D. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.01.038 · Cited by 198
Photopolymers for rapid prototyping
Liska, R., Schuster, M., Inführ, R., Turecek, C., Fritscher, C., Seidl, B., Schmidt, V., Kuna, L., Haase, A., Varga, F., et al. (2007) · Journal of Coatings Technology and Research · doi:10.1007/s11998-007-9059-3 · Cited by 197
Van Hooreweder, B., Moens, D., Boonen, R., Kruth, J.-P., & Sas, P. (2013) · Polymer Testing · doi:10.1016/j.polymertesting.2013.04.014 · Cited by 190
Inkjet printing as a novel medicine formulation technique
Scoutaris, N., Alexander, M. R., Gellert, P. R., & Roberts, C. J. (2011) · Journal of Controlled Release · doi:10.1016/j.jconrel.2011.07.033 · Cited by 188
Three-Dimensional Printing in Pharmaceutics: Promises and Problems
Yu, D. G., Zhu, L.-M., Branford-White, C. J., & Yang, X. L. (2008) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.21284 · Cited by 187
Towards fabrication of 3D printed medical devices to prevent biofilm formation
Sandler, N., Salmela, I., Fallarero, A., Rosling, A., Khajeheian, M., Kolakovic, R., Genina, N., Nyman, J., & Vuorela, P. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2013.11.001 · Cited by 184
Lee, B. K., Yun, Y. H., Choi, J. S., Choi, Y. C., Kim, J. D., & Cho, Y. W. (2012) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2012.02.011 · Cited by 172
Novel drug delivery devices for providing linear release profiles fabricated by 3DP
Yu, D.-G., Branford-White, C., Ma, Z.-H., Zhu, L.-M., Li, X.-Y., & Yang, X.-L. (2009) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2008.12.008 · Cited by 170
Water, J. J., Bohr, A., Boetker, J., Aho, J., Sandler, N., Nielsen, H. M., & Rantanen, J. (2015) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.24305 · Cited by 159
Huang, W., Zheng, Q., Sun, W., Xu, H., & Yang, X. (2007) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2007.02.021 · Cited by 159
Tablets With Material Gradients Fabricated by Three-Dimensional Printing
Yu, D. G., Yang, X. L., Huang, W. D., Liu, J., Wang, Y. G., & Xu, H. (2007) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.20864 · Cited by 159
3-dimensional (3D) fabricated polymer based drug delivery systems
Moulton, S. E., & Wallace, G. G. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.07.005 · Cited by 156
Development of 3D PPF/DEF scaffolds using micro-stereolithography and surface modification
Lan, P. X., Lee, J. W., Seol, Y., & Cho, D. (2008) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-008-3567-2 · Cited by 154
Printing Tablets with Fully Customizable Release Profiles for Personalized Medicine
Sun, Y., & Soh, S. (2015) · Advanced Materials · doi:10.1002/adma.201504122 · Cited by 144
Parents Can Dose Liquid Medication Accurately
McMahon, S. R., Rimsza, M. E., & Bay, R. C. (1997) · PEDIATRICS · doi:10.1542/peds.100.3.330 · Cited by 139
Wu, W., Zheng, Q., Guo, X., Sun, J., & Liu, Y. (2009) · Biomedical Materials · doi:10.1088/1748-6041/4/6/065005 · Cited by 139
Yu, D., Shen, X., Branford-White, C. J., Zhu, L., White, K., & Xiang, Y. (2009) · Journal of Pharmacy and Pharmacology · doi:10.1211/jpp.61.03.0006 · Cited by 128
Meléndez, P. A., Kane, K. M., Ashvar, C. S., et al. (2007) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.21189 · Cited by 123
Wang, C.-C., Tejwani, M. R., Roach, W. J., Kay, J. L., Yoo, J., Surprenant, H. L., Monkhouse, D. C., & Pryor, T. J. (2006) · Drug Development and Industrial Pharmacy · doi:10.1080/03639040500519300 · Cited by 118
van Riet‐Nales, D. A., Doeve, M. E., Nicia, A. E., Teerenstra, S., Notenboom, K., Hekster, Y. A., & van den Bemt, B. J. F. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2014.02.031 · Cited by 117
Analysis of Drug Content and Weight Uniformity for Half-Tablets of 6 Commonly Split Medications
Hill, S., Varker, A. S., Karlage, K. L., & Myrdal, P. B. (2009) · Journal of Managed Care Pharmacy · doi:10.18553/jmcp.2009.15.3.253 · Cited by 113
Characterization of microfeatures in selective laser sintered drug delivery devices
Cheah, C. M., Leong, K. F., Chua, C. K., Low, K. H., & Quek, H. S. (2002) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1243/095441102321032166 · Cited by 108
A novel fast disintegrating tablet fabricated by three-dimensional printing
Yu, D., Branford-White, C. J., Yang, Y., et al. (2009) · Drug Development and Industrial Pharmacy · doi:10.3109/03639040903059359 · Cited by 108
Leong, K. F., Chua, C. K., Gui, W., & Verani (2006) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-005-0217-4 · Cited by 107
A Step Toward Development of Printable Dosage Forms for Poorly Soluble Drugs
Raijada, D. K., Genina, N., Fors, D., Wisaeus, E., Peltonen, J. P. K., Rantanen, J., & Sandler, N. (2013) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.23678 · Cited by 105
Rattanakit, P., Moulton, S. E., Santiago, K. S., Liawruangrath, S., & Wallace, G. G. (2011) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2011.11.007 · Cited by 100
Laser stereolithography and supercritical fluid processing for custom-designed implant fabrication
Popov, V. K., Evseev, A. V., Ivanov, A. L., et al. (2004) · Journal of Materials Science Materials in Medicine · doi:10.1023/b:jmsm.0000011812.08185.2a · Cited by 97
Accuracy of tablet splitting: Comparison study between hand splitting and tablet cutter
Habib, W. A., Alanizi, A. S., Abdelhamid, M. M., & Alanizi, F. K. (2014) · Saudi Pharmaceutical Journal · doi:10.1016/j.jsps.2013.12.014 · Cited by 81
Helmy, S. A. (2015) · Journal of Managed Care & Specialty Pharmacy · doi:10.18553/jmcp.2015.21.1.76 · Cited by 69
Early Human Bone Response to Laser Metal Sintering Surface Topography: A Histologic Report
Mangano, C., Piattelli, A., d'Avila, S., et al. (2010) · Journal of Oral Implantology · doi:10.1563/aaid-joi-d-09-00003 · Cited by 64
Ways to minimize adverse drug reactions
Cohen, J. S. (1999) · Postgraduate Medicine · doi:10.3810/pgm.1999.09.688 · Cited by 64
3D printing of cell-laden constructs for heterogeneous tissue regeneration
Pati, F., Shim, J., Lee, J., & Cho, D. (2013) · Manufacturing Letters · doi:10.1016/j.mfglet.2013.09.004 · Cited by 63
Tablet Splitting and Weight Uniformity of Half-Tablets of 4 Medications in Pharmacy Practice
Tahaineh, L. M., & Gharaibeh, S. F. (2012) · Journal of Pharmacy Practice · doi:10.1177/0897190012442716 · Cited by 54
Wu, W., Zheng, Q., Guo, X., & Huang, W. (2009) · Journal of Wuhan University of Technology-Mater Sci Ed · doi:10.1007/s11595-009-6977-1 · Cited by 44
Introduction to rapid prototyping of biomaterials
Chua, C. K., Leong, K. F., & An, J. (2014) · Elsevier eBooks · doi:10.1533/9780857097217.1 · Cited by 30
Isoniazid, Pyrazinamide and Rifampicin Content Variation in Split Fixed-Dose Combination Tablets
Pouplin, T., Phuong, P. N., Toi, P. V., Pouplin, J. N., & Farrar, J. (2014) · PLoS ONE · doi:10.1371/journal.pone.0102047 · Cited by 30
Analysis of in Vitro Dissolution of Whole vs. Half Controlled-Release Theophylline Tablets
Shah, V. P., Yamamoto, L. A., Schuirman, D., Elkins, J. S., & Skelly, J. P. (1987) · Pharmaceutical Research · doi:10.1023/a:1016442514205 · Cited by 24
Projection Printing of 3-Dimensional Tissue Scaffolds
Lu, Y., & Chen, S. (2012) · Methods in molecular biology · doi:10.1007/978-1-61779-764-4_17 · Cited by 20
More medications, fewer pills: Combination medications for the treatment of hypertension
Lewanczuk, R. Z., & Tobe, S. W. (2007) · Canadian Journal of Cardiology · doi:10.1016/s0828-282x(07)70803-6 · Cited by 19
Bae, E.-J., Kim, H., Kim, W., & Kim, J. (2015) · The Journal of Advanced Prosthodontics · doi:10.4047/jap.2015.7.4.312 · Cited by 19
Effect on Dissolution from Halving Methylphenidate Extended-Release Tablets
Erramouspe, J., & Jarvi, E. J. (1997) · Annals of Pharmacotherapy · doi:10.1177/106002809703101001 · Cited by 18
Spence, J. D. (2008) · International Journal of Stroke · doi:10.1111/j.1747-4949.2008.00169.x · Cited by 17
Effect of Pollypill on cardiovascular parameters: Systematic review and meta-analysis
Charan, J., Goyal, J. P., & Saxena, D. B. (2013) · Journal of Cardiovascular Disease Research · doi:10.1016/j.jcdr.2012.11.005 · Cited by 10
Cited by
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Inkjet Bioprinting of Biomaterials
Li, X., Liu, B., Pei, B., Chen, J., Zhou, D., Peng, J., Zhang, X., Jia, W., & Xu, T. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00008 · Cited by 686
Current and emerging applications of 3D printing in medicine
Liaw, C.-Y., & Guvendiren, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7279 · Cited by 604
Selective laser sintering (SLS) 3D printing of medicines
Fina, F., Goyanes, A., Gaisford, S., & Basit, A. W. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.06.082 · Cited by 577
“It is widely recognised that the high-energy input of the laser may degrade drugs if they are used as the starting material (Alhnan et al., 2016; Yu et al., 2008).”
BackgroundPharmaceutical amorphous solid dispersion: A review of manufacturing strategies
Bhujbal, S. V., Mitra, B., Jain, U., Gong, Y., Agrawal, A., Karki, S., Taylor, L. S., Kumar, S., & (Tony) Zhou, Q. (2021) · Acta Pharmaceutica Sinica B · doi:10.1016/j.apsb.2021.05.014 · Cited by 556
Metadata
- Authors
- Alhnan, M. A., Okwuosa, T. C., Sadia, M., Wan, K.-W., Ahmed, W., & Arafat, B.
- Venue
- Pharmaceutical Research
- Published
- 2016-05-18
- Volume
- 33
- Issue
- 8
- Pages
- 1817-1832
- ISSN
- 0724-8741 (ISSN-L)
- 1573-904X
- OpenAlex
- W2399031825
- Cited by
- 554
- References
- 82
- FWCI
- 40.16
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.