Hybrid MXene/reduced graphene oxide aerogel microspheres for hydrogen evolution reaction
The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index; 7 of the 23 sources its claims cite were checked for support.
Overview
CoChat Summary
TL;DR
Ti3C2Tx MXene/reduced graphene oxide aerogel microspheres were fabricated by electrospraying, freeze-drying, and thermal annealing, producing a center-diverging 3D porous network. The optimized M:GO 3:6 sample annealed at 400 °C gave the best HER activity with η10 = -336 mV, outperforming bulk Ti3C2Tx/GO aerogel and rGOAMs.
Key findings
- Hybrid Ti3C2Tx/rGOAMs retain dandelion-like microspheres with center-diverging, well-aligned microchannels after thermal reduction; the 3:6 sample reduced at 400 °C has a BET surface area of 176.73 m2/g.
- HER optimization: M:GO 3:6 after 400 °C shows the lowest η10 = -336 mV, compared with -393 mV for 1:6 and -441 mV for 5:6; bulk Ti3C2Tx/GO hybrid aerogel at the same conditions required 463 mV.
- Tafel slopes at 400 °C are 170.5 mV/dec (1:6), 152.5 mV/dec (3:6), and 130.7 mV/dec (5:6); the 5:6 sample has the fastest electron transfer despite a worse η10. Low-valence Ti content increases with MXene ratio: 3.5% (1:6), 8.1% (3:6), and 20.5% (5:6).
- Ti3C2Tx/rGOAMs show enhanced HER activity versus rGOAMs, attributed to MXene and low-valence Ti; XRD (002) shifts from 9.54° to 7.14° after etching and to 6.02° after exfoliation, and Raman ID/IG increases with MXene ratio (1.01 to 1.05 and 1.09) and reduction temperature (1.06 to 1.14, 1.15, and 1.17).
Methods
- Ti3C2Tx was prepared by LiF/HCl etching of Ti3AlC2 followed by sonication exfoliation; hybrid microspheres were made by electrospraying Ti3C2Tx/GO dispersions (M:GO 1:6, 3:6, 5:6) into an n-hexane collector at -85 °C, freeze-drying for 48 h, and annealing at 200, 400, or 600 °C in Ar for 2 h.
- Characterization included XRD, Raman, SEM/EDS, TEM, XPS, N2 BET/BJH, and TGA.
- Electrochemical measurements used a three-electrode CHI 600 workstation in Ar-saturated 0.5 M H2SO4, with Ag/AgCl reference, Pt counter, glassy carbon working electrode, LSV at 5 mV/s, and potentials calibrated to RHE.
Limitations
- The paper states that samples above 600 °C were not investigated because the MXene can oxidize at temperatures higher than 600 °C.
- Evident from the text: the best η10 = -336 mV and Tafel slopes of 130.7–224 mV/dec remain far from PGM benchmarks, and no durability or stability data are reported in the main text.
- Evident from the text: the mechanistic attribution to low-valence Ti and improved mass transfer relies on XPS/Tafel correlations and structural characterization rather than direct operando evidence; the comparison to rGOAMs lacks numerical HER data in the main text.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
5 Valid · 2 Not valid · 6 Not checked · 37 Own results and interpretations
At least one cited source doesn’t support this claim or points to a different paper, and none confirmed it — see the verdicts below.
In the paper
“indicating the low state valence titaniummight play a key role in HER behavior [6, 36–38]”
What the sources say
- Not checked — no full text of the sourcecites [6] Seh ZW, Fredrickson KD, Anasori B, Kibsgaard J, Strickler AL, Lukatskaya MR, Gogotsi Y, Jaramillo TF, Vojvodic A (2016) Two-dimensional molybdenum carbide (MXene) as an efficient electrocatalyst for hydrogen evolution. ACS Energy Lett 1:589–594 source
- Disputedcites [36] Gao GP, O'Mullane AP, Du AJ (2017) 2D MXenes: a new family of promising catalysts for the hydrogen evolution reaction. ACS Catal 7:494–500 sourceExperimental — accuracy not yet measured
The Excellent Electrical Conductivity section describes Ti in oxygen-terminated Ti₂CO₂ as being in its highest oxidation state (+4), not a low-valence state. The Hydrogen Evolution Reaction Activity section identifies surface oxygen as the HER active sites and predicts strong HER performance for Ti₂CO₂. These passages point to a different explanation from the proposed key role of low-valence titanium. (LLM, conf=0.82)
Checked by a reasoning model — may be wrong.
- Not checked — no full text of the sourcecites [37] Ling C, Shi L, Ouyang Y, Wang J (2016) Searching for highly active catalysts for hydrogen evolution reaction based on O-terminated MXenes through a simple descriptor. Chem Mater 28:9026–9032 source
- Not checked — no full text of the sourcecites [38] Yuan W, Cheng L, An Y, Wu H, Yao N, Fan X, Guo X (2018) MXene Nanofibers as Highly Active Catalysts for Hydrogen Evolution Reaction. ACS Sustain Chem Eng 6:8976–8982 source
hedgedstates a possible cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“the MXene utilized in this study can be oxidized at temperature higher than 600 °C [20, 32–34]”
What the sources say
- Not checked — no full text of the sourcecites [20] Li Y, Meng F, Mei Y, Wang H, Guo Y, Wang Y, Peng F, Huang F, Zhou Z (2020) Electrospun generation of Ti3C2Tx MXene@graphene oxide hybrid aerogel microspheres for tunable high-performance microwave absorption. Chem Eng J 391:123512 source
- Not checked — no full text of the sourcecites [32] Ferrari AC, Basko DM (2013) Raman spectroscopy as a versatile tool for studying the properties of graphene. Nat Nanotechnol 8:235–246 source
- Not checked — no full text of the sourcecites [33] Sarycheva A, Gogotsi Y (2020) Raman spectroscopy analysis of the structure and surface chemistry of Ti3C2Tx MXene. Chem Mater 32:3480–3488 source
- Could not verifycites [34] Shen CJ, Wang LB, Zhou AG, Wang B, Wang XL, Lian WW, Hu QK, Qin G, Liu XQ (2018) Synthesis and electrochemical properties of two-dimensional RGO/Ti3C2Tx nanocomposites. Nanomaterials 8:80 sourceExperimental — accuracy not yet measured
The Introduction identifies the MXene as Ti3C2Tx, and Experimental Section 2.2 describes heating its composite at 450 °C in argon and hydrogen. Neither passage addresses oxidation above 600 °C; searches for that temperature and for thermal oxidation found no supporting passage in our copy. Page numbers were unavailable. (LLM, conf=0.75)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“confirming the presence of the exfoliated MXene [29, 33]”
What the sources say
- Partly supportedcites [29] Zhou T, Wu C, Wang Y, Tomsia AP, Li M, Saiz E, Fang S, Baughman RH, Jiang L, Cheng Q (2020) Super-tough MXene-functionalized graphene sheets. Nat Commun 11:2077 sourceExperimental — accuracy not yet measured
The Results section, under “Synthesis and characterization of the graphene sheet,” identifies Eg group vibrations in the Raman spectrum as expected for exfoliated MXene. It does not report that finding at an M:GO ratio of 5:6; the composition-specific part of the claim is unsupported by this source. (LLM, conf=0.86)
- Not checked — no full text of the sourcecites [33] Sarycheva A, Gogotsi Y (2020) Raman spectroscopy analysis of the structure and surface chemistry of Ti3C2Tx MXene. Chem Mater 32:3480–3488 source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Figure 5d shows that the ID/IG increases from 1.06 to 1.14, 1.15, and 1.17 with increase of the reduction temperature”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The intensity of the (002) peak increases when the M:GO ratio increases from 1:6 to 3:6 (Fig. 5a)”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
32 more claims
Create a free account to see all 50 claims and every source verdict.
- Probably not a substantial claim. 6
- It may state two separate claims as one. 7
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“This hierarchical system of aerogel microspheres provides ideal channels that enable readily access to active sites and optimal mass transfer thereby promoting proton diffusion within the electrodes”
From 3D Printing of Graphene Aerogel Microspheres to Architect High‐Performance Electrodes for Hydrogen Evolution Reaction (2025) · cites this paper as [24]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The reduced graphene oxide aerogel microspheres (rGOAMs) with ordered microchannel structures has been recently proven as a stable template to host various electroactive catalysts by our group.[21–26]”
From 3D Printing of Graphene Aerogel Microspheres to Architect High‐Performance Electrodes for Hydrogen Evolution Reaction (2025) · cites this paper as [24]
Experimental — accuracy not yet measured
Citations
Cites
Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
Biesinger, M. C., Payne, B. P., Grosvenor, A. P., Lau, L. W. M., Gerson, A. R., & Smart, R. S. C. (2011) · Applied Surface Science · doi:10.1016/j.apsusc.2010.10.051 · Cited by 11,640
2D metal carbides and nitrides (MXenes) for energy storage
Anasori, B., Lukatskaya, M. R., & Gogotsi, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.98 · Cited by 7,440
Raman spectroscopy as a versatile tool for studying the properties of graphene
Ferrari, A. C., & Basko, D. M. (2013) · Nature Nanotechnology · doi:10.1038/nnano.2013.46 · Cited by 7,405
Design of electrocatalysts for oxygen- and hydrogen-involving energy conversion reactions
Jiao, Y., Zheng, Y., Jaroniec, M., & Qiao, S. Z. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00470a · Cited by 5,388
Biesinger, M. C., Lau, L. W. M., Gerson, A. R., & Smart, R. S. C. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.07.086 · Cited by 4,592
Enhancing Hydrogen Evolution Activity in Water Splitting by Tailoring Li + -Ni(OH) 2 -Pt Interfaces
Subbaraman, R., Tripkovic, D., Strmcnik, D., Chang, K.-C., Uchimura, M., Paulikas, A. P., Stamenkovic, V., & Markovic, N. M. (2011) · Science · doi:10.1126/science.1211934 · Cited by 3,135 · cited 1×
“They are usually designed as nanoparticles dispersed and stabilized on a support to increase the active surface area, so accelerating HER and OER reactions [2, 3].”
BackgroundX-ray photoelectron spectroscopy of select multi-layered transition metal carbides (MXenes)
Halim, J., Cook, K. M., Naguib, M., Eklund, P., Gogotsi, Y., Rosen, J., & Barsoum, M. W. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2015.11.089 · Cited by 2,047
Mattevi, C., Eda, G., Agnoli, S., Miller, S., Mkhoyan, K. A., Celik, O., Mastrogiovanni, D., Granozzi, G., Garfunkel, E., & Chhowalla, M. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200900166 · Cited by 1,723
Self-citationTwo-Dimensional Molybdenum Carbide (MXene) as an Efficient Electrocatalyst for Hydrogen Evolution
Seh, Z. W., Fredrickson, K. D., Anasori, B., Kibsgaard, J., Strickler, A. L., Lukatskaya, M. R., Gogotsi, Y., Jaramillo, T. F., & Vojvodic, A. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00247 · Cited by 1,482
Cited by
Recent Advances in MXene‐Based Aerogels: Fabrication, Performance and Application
Wei, C., Zhang, Q., Wang, Z., Yang, W., Lu, H., Huang, Z., Yang, W., & Zhu, J. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202211889 · Cited by 158
Self-citationChaudhary, K., Zulfiqar, S., Somaily, H. H., Aadil, M., Warsi, M. F., & Shahid, M. (2022) · Electrochimica Acta · doi:10.1016/j.electacta.2022.141103 · Cited by 140
MoS 2 quantum dot-decorated MXene nanosheets as efficient hydrogen evolution electrocatalysts
Huang, H., Xue, Y., Xie, Y., Yang, Y. K., Yang, L. L., He, H., Jiang, Q., & Ying, G. (2022) · Inorganic Chemistry Frontiers · doi:10.1039/d1qi01528a · Cited by 133
Zhou, Z., Seif, A., Pourhashem, S., Silvestrelli, P. L., Ambrosetti, A., Mirzaee, M., Duan, J., Rashidi, A., & Hou, B. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c14145 · Cited by 89
Ultra‐Flyweight Cryogels of MXene/Graphene Oxide for Electromagnetic Interference Shielding
Ghaffarkhah, A., Hashemi, S. A., Rostami, S., Amini, M., Ahmadijokani, F., Isfahani, A. P., Mhatre, S., Rojas, O. J., Kamkar, M., Wuttke, S., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202304748 · Cited by 89
Metadata
- Authors
- Cheng, Y., Zhan, Y., Ran, J., Wang, Z., Agnoli, S., Xia, H., & Granozzi, G.
- Affiliations
- Sichuan University (CN)
- Liaocheng University (CN)
- University of Padua (IT)
- Corresponding author
- Wang, Zhanhua
- Xia, Hesheng
- Venue
- Ionics
- Published
- 2021-04-28
- Volume
- 27
- Issue
- 7
- Pages
- 3099-3108
- ISSN
- 0947-7047 (ISSN-L)
- 1862-0760
- OpenAlex
- W3158281053
- Semantic Scholar
- 90f4d969da9f002da549e36d37feeb50c6b279bc
- Cited by
- 35
- References
- 40
- Citations by year
- 2026: 5 · 2025: 11 · 2024: 6 · 2023: 6 · 2022: 7
- FWCI
- 0.94
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Ionics (publishedVersion)
- Padua Research Archive (University of Padova) (submittedVersion)
- Topics
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Materials Chemistry › MXene and MAX Phase Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Advanced Photocatalysis Techniques
- Keywords
- MXene, reduced graphene oxide, hydrogen evolution reaction, Ti3C2Tx, electrospraying, freeze-drying, annealing, mesoporous structure, mass transfer, electrocatalysis, hybrid composites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hybrid MXene/reduced graphene oxide aerogel microspheres for hydrogen evolution reaction. https://app.cochat.ai/papers/10.1007/s11581-021-04062-5
- The paper
- Cheng, Y., Zhan, Y., Ran, J., Wang, Z., Agnoli, S., Xia, H., & Granozzi, G. (2021). Hybrid MXene/reduced graphene oxide aerogel microspheres for hydrogen evolution reaction. Ionics. https://doi.org/10.1007/s11581-021-04062-5
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.