The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Chemistry and electrochemistry of hot corrosion of metals
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The predominant chemical reactant involved in hot corrosion has been confirmed to be sodium sulfate (Na2SO4), due to its extraordinary stability over a wide range of temperatures and oxygen partial pressures [1, 6, 19].”
From A review on molten sulfate salts induced hot corrosion (2021) · cites this paper as [19]
In the citing paper
“As with the thin aqueous layer on alloys in atmospheric corrosion, this molten salt layer is a pure ionic conductor which separates the alloys from the gas phase physically [1, 19, 47].”
From A review on molten sulfate salts induced hot corrosion (2021) · cites this paper as [19]
In the citing paper
“These sulfate salts easily attach onto the surfaces of high temperature components and are melted to form a thin fused salt film at elevated temperatures.”
From A review on molten sulfate salts induced hot corrosion (2021) · cites this paper as [19]
In the citing paper
“Moreover, S2O7 2is more active than other oxygen species, i.e., O2 and SO4 2- , and is reduced to SO4 2and SO3 - . This half-reaction can be the main reduction reaction [6, 19, 75].”
From A review on molten sulfate salts induced hot corrosion (2021) · cites this paper as [19]
In the citing paper
“In the O2-SO2-SO3 environment (Eq. (1)), the solubilities of both O2 and SO2 in molten salt are poor. In contrast, SO3 can dissolve in molten salt because of the formation of pyrosulfate ions through Eq. (2) [1, 19].”
From A review on molten sulfate salts induced hot corrosion (2021) · cites this paper as [19]
In the citing paper
“In the oxidizing environment without SO2 or SO3, several cathodic reactions including the reduction of oxygen and sulfate ions might be involved as shown in Eq. (18-21) [19, 84].”
From A review on molten sulfate salts induced hot corrosion (2021) · cites this paper as [19]
In the citing paper
“Chromium is widely recognized as a beneficial element to combat the hot corrosion of various alloys [2, 19].”
From A review on molten sulfate salts induced hot corrosion (2021) · cites this paper as [19]
Citations
Cites
Mechanisms for the hot corrosion of nickel-base alloys
Goebel, J. A., Pettit, F. S., & Goward, G. W. (1973) · Metallurgical Transactions · doi:10.1007/bf02649626 · Cited by 420
Na2SO4-induced accelerated oxidation (hot corrosion) of nickel
Goebel, J. A., & Pettit, F. S. (1970) · Metallurgical Transactions · doi:10.1007/bf02642794 · Cited by 284
Whitney Award Lecture—1986: Chemistry and Electrochemistry of the Hot Corrosion of Metals
Rapp, R. A. (1986) · CORROSION · doi:10.5006/1.3583026 · Cited by 189
Self-citationHot Corrosion of High-Temperature Alloys
Stringer, J. (1977) · Annual Review of Materials Science · doi:10.1146/annurev.ms.07.080177.002401 · Cited by 144
The role of sodium in the accelerated oxidation phenomenon termed sulfidation
Bornstein, N. S., & DeCrescente, M. A. (1971) · Metallurgical Transactions · doi:10.1007/bf02813266 · Cited by 139
The Hot Corrosion of Metals by Molten Salts
Rapp, R. A. (1981) · ECS Proceedings Volumes · doi:10.1149/198110.0159pv · Cited by 136
Self-citationFormation and Reactivity Thermodynamics of Sodium Sulfate With Gas Turbine Alloys
DeCrescente, M. A., & Bornstein, N. S. (1968) · CORROSION · doi:10.5006/0010-9312-24.5.127 · Cited by 113
The Solubilities of NiO , Co3 O 4, and Ternary Oxides in Fused Na2 SO 4 at 1200°K
Gupta, D. K., & Rapp, R. A. (1980) · Journal of The Electrochemical Society · doi:10.1149/1.2129374 · Cited by 94
Self-citationSolubilities of Cr2 O 3 in Fused Na2 SO 4 at 1200 K
Zhang, Y. S. (1986) · Journal of The Electrochemical Society · doi:10.1149/1.2108648 · Cited by 87
Chemical Reactions Involved in the Initiation of Hot Corrosion of IN‐738
FRYBURG, G. C., Kohl, F. J., & STEARNS, C. A. (1984) · Journal of The Electrochemical Society · doi:10.1149/1.2115455 · Cited by 78
Research works printed but not linked: 4
- Bornstein, 1969, Trans. Metall. Soc. AIME, 245, 1947
- Y.S. Zhang and R.A. Rapp, Solubilities of CeO2, HfO2 and Y2O3 in fused Na2SO4−30 m/o NaVO3 and CeO2 in pure Na2SO4 at 900 °C, Corrosion, in the press.
- Rahmel, 1987, Proc. Int. Symp. on High Temperature Corrosion, 85
- Rapp, 1983, 24, 23
Cited by
Sorted by citations
Antunes, R. A., & de Oliveira, M. C. L. (2013) · Corrosion Science · doi:10.1016/j.corsci.2013.07.013 · Cited by 189
A review on molten sulfate salts induced hot corrosion
Hu, S., Finklea, H., & Liu, X. (2021) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2021.03.013 · Cited by 183
Ishitsuka, T., & Nose, K. (2002) · Corrosion Science · doi:10.1016/s0010-938x(01)00059-2 · Cited by 176
State of the art on high-temperature corrosion-resistant coatings
Mévrel, R. (1989) · Materials Science and Engineering A · doi:10.1016/0921-5093(89)90713-2 · Cited by 171
Y/Hf-doped AlCoCrFeNi high-entropy alloy with ultra oxidation and spallation resistance
Lu, J., Chen, Y., Zhang, H., Ni, N., Li, L., He, L., Mu, R., Zhao, X., & Guo, F. (2020) · Corrosion Science · doi:10.1016/j.corsci.2019.108426 · Cited by 152
Leyens, C., Pint, B. A., & Wright, I. G. (2000) · Surface and Coatings Technology · doi:10.1016/s0257-8972(00)00878-1 · Cited by 145
High Temperature Oxidation and Corrosion Properties of High Entropy Superalloys
Tsao, T., Yeh, A., Kuo, C., & Murakami, H. (2016) · Entropy · doi:10.3390/e18020062 · Cited by 129
Effect of Quaternary Additions on the Oxidation Behavior of Hf-Doped NiAl
Pint, B. A., More, K. L., & Wright, I. G. (2003) · Oxidation of Metals · doi:10.1023/a:1023087926788 · Cited by 125
Fesharaki, M. N., Razavi, R. S., Mansouri, H. A., & Jamali, H. (2018) · Optics & Laser Technology · doi:10.1016/j.optlastec.2018.09.011 · Cited by 84
Thermochemistry and Solubilities of Oxides in Sodium Sulfate-Vanadate Solutions
Hwang, Y.-S., & Rapp, R. A. (1989) · CORROSION · doi:10.5006/1.3585003 · Cited by 82
Self-citationBose, S. (2007) · Elsevier eBooks · doi:10.1016/b978-075068252-7/50006-8 · Cited by 80
Molten‐Salt Corrosion of Silicon Nitride: I, Sodium Carbonate
Fox, D. S., & Jacobson, N. S. (1988) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1988.tb05828.x · Cited by 69
Tzvetkoff, T., & Kolchakov, J. (2004) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2004.05.039 · Cited by 68
The interaction of surface engineering and high temperature corrosion protection
frederik, S. M., Mévrel, R., & Bennett, M. J. (1994) · Materials at High Temperatures · doi:10.1080/09603409.1994.11689470 · Cited by 66
Corrosion behavior of wire arc sprayed Ni-based coatings in extreme environment
Kumar, M., Kant, S., & Kumar, S. (2019) · Materials Research Express · doi:10.1088/2053-1591/ab3bd8 · Cited by 65
Yang, Y. Q., Zhao, Y., Wen, Z., Lu, G., Pei, H., & Yue, Z. F. (2022) · Corrosion Science · doi:10.1016/j.corsci.2022.110381 · Cited by 62
Hot corrosion studies of boiler steels exposed to different molten salt mixtures at 950 °C
Mahajan, S., & Chhibber, R. (2019) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2019.02.013 · Cited by 61
Liu, H., Tan, C. K. I., Meng, T. L., Teo, S. L., Liu, J., Cao, J. X., Wei, Y., Tan, D. C. C., Lee, C. J. J., Suwardi, A., et al. (2021) · Corrosion Science · doi:10.1016/j.corsci.2021.109869 · Cited by 60
Gong, N., Meng, T. L., Teo, S. L., Cao, J. X., Lee, C. J. J., Tan, C. K. I., Tan, D. C. C., Suwardi, A., Lin, M., Misra, R. D. K., et al. (2023) · Corrosion Science · doi:10.1016/j.corsci.2023.111026 · Cited by 58
Effect of temperature on coal ash hot corrosion resistance of Inconel 740 superalloy
Aung, N. N., & Liu, X. (2014) · Corrosion Science · doi:10.1016/j.corsci.2014.01.020 · Cited by 57
Chawla, V., Chawla, A., Puri, D., Prakash, S., Gurbuxani, P. G., & Sidhu, B. S. (2011) · Journal of Minerals and Materials Characterization and Engineering · doi:10.4236/jmmce.2011.104027 · Cited by 50
Advanced burner-rig test for oxidation–corrosion resistance evaluation of MCrAlY/superalloys systems
Raffaitin, A., Crabos, F., Andrieu, É., & Monceau, D. (2006) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2006.07.256 · Cited by 50
Hot corrosion behavior of HVOF-sprayed CoNiCrAlYSi coatings in a sulphate environment
Yuan, K., Peng, R. L., Li, X.-H., & Johansson, S. (2015) · Vacuum · doi:10.1016/j.vacuum.2015.09.015 · Cited by 50
Singh, G., Bala, N., Chawla, V., & Singla, Y. K. (2021) · Corrosion Science · doi:10.1016/j.corsci.2021.109666 · Cited by 48
Compositional Effects on Aluminide Oxidation Performance: Objectives for Improved Bond Coats
Pint, B. A., Haynes, J. A., More, K. L., Wright, I. G., & Leyens, C. (2000) · doi:10.7449/2000/superalloys_2000_629_638 · Cited by 46
Corrosion of nickel, iron, cobalt and their alloys in molten salt electrolytes
Tzvetkoff, T., Girginov, C. A., & Bojinov, M. S. (1995) · Journal of Materials Science · doi:10.1007/bf00356688 · Cited by 44
Feng, L., Tian, B., Zhu, M. F., & Yang, M. (2025) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2025.108224 · Cited by 42
Tzvetkoff, T. B., & Gencheva, P. (2003) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2003.08.001 · Cited by 41
Corrosion behavior of Fe–Ni–Cr alloys in the molten salt of LiCl–Li2O at high temperature
Cho, S. H., Zhang, J. S., Shin, Y., Park, S. W., & Park, H. S. (2003) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2003.10.011 · Cited by 38
Meißner, T. M., Oskay, C., Bonk, A., Grégoire, B., Donchev, A., Solimani, A., & Galetz, M. C. (2021) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2021.111105 · Cited by 38
Field test corrosion experiments in Denmark with biomass fuels. Part 2: Co-firing of straw and coal
Montgomery, M., & Larsen, O. H. (2002) · Materials and Corrosion · doi:10.1002/1521-4176(200203)53:3 · Cited by 36
Characterization of thermally cycled alumina scales
Pint, B. A., More, K. L., Wright, I. G., & Tortorelli, P. F. (2000) · Materials at High Temperatures · doi:10.1179/mht.2000.024 · Cited by 35
Yuan, K., Peng, R. L., Li, X.-H., Talus, A., Johansson, S., & Wang, Y. (2014) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2014.11.065 · Cited by 34
Bose, S. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-804622-7.00005-x · Cited by 38
Mudgal, D., Kumar, S., Singh, S. P., & Prakash, S. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-1177-3 · Cited by 34
Haynes, J. A., Unocic, K. A., Lance, M. J., & Pint, B. A. (2013) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2013.09.062 · Cited by 32
Xie, D., Xiong, X., & Wang, F. (2003) · Oxidation of Metals · doi:10.1023/a:1023619222906 · Cited by 31
Liang, M., Zhang, J., Gao, J. Y., Yi, H., Yin, B., Yang, Z., Qi, F., & Yang, Y. (2025) · Corrosion Science · doi:10.1016/j.corsci.2025.112746 · Cited by 28
Oxidation of Superalloys in Extreme Environments
Pint, B. A., Dryepondt, S. N., & Unocic, K. A. (2010) · Wiley eBooks · doi:10.1002/9781118495223.ch66 · Cited by 30
OXIDATION, HOT CORROSION AND PROTECTION OF METALLIC MATERIALS
Saunders, S. R. J., & Nicholls, J. R. (1996) · Elsevier eBooks · doi:10.1016/b978-044489875-3/50019-3 · Cited by 27
Yang, Y. Q., Wen, Z., Zhao, Y., Pei, H., Yang, Y., & Yue, Z. F. (2024) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2024.108162 · Cited by 26
Leyens, C., Wright, I. G., & Pint, B. A. (2000) · Oxidation of Metals · doi:10.1023/a:1004698211940 · Cited by 26
Selection of corrosion-resistant materials for use in molten nitrate salts
Tortorelli, P. F., Bishop, P. S., & DiStefano, J. R. (1989) · doi:10.2172/5236321 · Cited by 26
Effects of imposed stresses on high temperature corrosion behaviour of T91
Ning, Z., Zhou, Q., Liu, Z., Li, N., Luo, Q., & Wen, D. (2021) · Corrosion Science · doi:10.1016/j.corsci.2021.109595 · Cited by 25
Corrosion behaviours of several thermal spray coatings used on boiler tubes at elevated temperatures
Rezakhani, D. (2007) · Anti-Corrosion Methods and Materials · doi:10.1108/00035590710762384 · Cited by 25
de la Roche, J., Alvarado-Orozco, J. M., & Toro, A. (2020) · Rare Metals · doi:10.1007/s12598-020-01388-3 · Cited by 24
Bradshaw, A., Simms, N. J., & Nicholls, J. R. (2012) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2012.10.047 · Cited by 24
Hot corrosion behaviour of Inconel 738 superalloy in presence of NaCl, Na2SO4, V2O5
Patil, A. R., & Vagge, S. T. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.05.068 · Cited by 23
High Temperature Corrosion of Alumina-forming Iron, Nickel and Cobalt-base Alloys
Pint, B. A. (2009) · Elsevier eBooks · doi:10.1016/b978-044452787-5.00077-9 · Cited by 23
Fundamentals of High Temperature Corrosion
Schütze, M. (2013) · Materials Science and Technology · doi:10.1002/9783527603978.mst0395 · Cited by 23
Corrosion behaviour of Cr 3 C 2 -NiCr coated superalloys under actual medical waste incinerator
Mudgal, D., Ahuja, L., Singh, S. P., & Prakash, S. (2017) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2017.06.050 · Cited by 22
Godlewski, K., & Godlewska, E. (1987) · Materials Science and Engineering · doi:10.1016/0025-5416(87)90073-5 · Cited by 22
Corrosion of Al0.1CoCrFeNi High Entropy Alloy in a Molten Eutectic Salt
Jalbuena, A., Ury, N. E., Bae, J., Faraj, C., Hanan, K., Kasnakjian, S., Logier, J., Mishra, R. S., Wang, X., Earthman, J. C., et al. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0561911jes · Cited by 20
The effect of cycle frequency, H2O and CO2 on TBC lifetime with NiCoCrAlYHfSi bond coatings
Lance, M. J., Unocic, K. A., Haynes, J. A., & Pint, B. A. (2014) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2014.08.082 · Cited by 19
Yang, B., Li, B., Chen, X., Zhang, Y., & Li, Y. (2024) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2024.129731 · Cited by 18
Brooking, L., Gray, S., Dawson, K., Nicholls, J. R., Simms, N. J., Sumner, J., & Tatlock, G. J. (2019) · Corrosion Science · doi:10.1016/j.corsci.2019.108293 · Cited by 18
Fundamentals of High Temperature Corrosion
Schütze, M. (2000) · Wiley eBooks · doi:10.1002/9783527619306.ch2 · Cited by 18
Zhang, Y., Hu, S., Wen, Y., Ikeuba, A. I., Tan, X., Sun, T., & Liu, X. (2025) · Electrochimica Acta · doi:10.1016/j.electacta.2025.146105 · Cited by 17
Okoro, S. C., Kiamehr, S., Montgomery, M., Frandsen, F., & Pantleon, K. (2016) · Materials and Corrosion · doi:10.1002/maco.201609174 · Cited by 17
Oxidation of Superalloys in Extreme Environments
Pint, B. A., Unocic, K. A., & Dryepondt, S. N. (2010) · International Symposium on Superalloy 718 and Derivatives · doi:10.7449/2010/superalloys_2010_861_875 · Cited by 17
Oxidation and Corrosion of New MCrAlX Coatings : Modelling and Experiments
Yuan, K. (2014) · Linköping University Electronic Press eBooks · doi:10.3384/diss.diva-111119 · Cited by 16
Badea, T. A., Batalu, D., Constantin, N., Paraschiv, A., Pătroi, D., & Ceatra, L. C. (2022) · Materials · doi:10.3390/ma15124082 · Cited by 15
Rani, A., Bala, N., & Gupta, C. M. (2017) · Anti-Corrosion Methods and Materials · doi:10.1108/acmm-09-2016-1712 · Cited by 15
Malacarne, R., Mathieu, S., Siblani, M., Aranda, L., Knittel, S., Desgranges, C., & Vilasi, M. (2023) · Corrosion Science · doi:10.1016/j.corsci.2023.111186 · Cited by 16
Malacarne, R., Mathieu, S., Aranda, L., Diomande, D., Desgranges, C., Knittel, S., & Vilasi, M. (2023) · Corrosion Science · doi:10.1016/j.corsci.2023.111550 · Cited by 16
Critical Assessment 4: Challenges in developing high temperature materials
Pint, B. A. (2014) · Materials Science and Technology · doi:10.1179/1743284714y.0000000580 · Cited by 13
Molten salt corrosion resistance of FeAl alloy with additions of Li, Ce and Ni
Gonzalez-Rodriguez, J. G., Luna-Ramírez, A., Salazar, M., Porcayo-Calderón, J., Rosas, G., & Martínez-Villafañe, A. (2005) · Materials Science and Engineering A · doi:10.1016/j.msea.2005.04.022 · Cited by 13
Matsumoto, M., Tsuchiyama, A., Miyake, A., Ito, M., Matsuno, J., Uesugi, K., Takeuchi, A., Kodama, Y., Yasutake, M., & Vaccaro, E. (2022) · Geochimica et Cosmochimica Acta · doi:10.1016/j.gca.2022.02.024 · Cited by 13
High temperature molten salt corrosion investigations on P22/P91 power plant dissimilar welds
Mahajan, S., & Chhibber, R. (2020) · Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering · doi:10.1177/0954408920966304 · Cited by 12
Liu, Z., Ning, Z., Zhou, Q., Li, N., & Liu, T. (2021) · Oxidation of Metals · doi:10.1007/s11085-021-10084-1 · Cited by 12
Hot Corrosion Behavior and Mechanism of High-Velocity Arc-Sprayed Ni-Cr Alloy Coatings
Cheng, J., Wu, Y., Chen, L., Hong, S., Qiao, L., & Wei, Z. (2019) · Journal of Thermal Spray Technology · doi:10.1007/s11666-019-00890-0 · Cited by 11
Quantifying High Temperature Corrosion
Su, Y., Stack, P., Stephens, C. J., Kane, K. A., Dryepondt, S. N., Pillai, R., Pint, B. A., & Tossey, B. M. (2021) · NACE CORROSION Conference · doi:10.5006/c2021-16805 · Cited by 11
Guo, H., Xu, H., & Gong, S. (2002) · Journal of Materials Science · doi:10.1023/a:1021085227071 · Cited by 11
Hot Corrosion Study of 9Cr–1Mo Boiler Steel Exposed to Different Molten Salt Mixtures
Mahajan, S., & Chhibber, R. (2019) · Transactions of the Indian Institute of Metals · doi:10.1007/s12666-019-01685-1 · Cited by 10
High-Temperature Gaseous Corrosion Testing
(2003) · ASM International eBooks · doi:10.31399/asm.hb.v13a.a0003671 · Cited by 10
Phase Stability Diagrams for High Temperature Corrosion Processes
Ramos-Hernández, J. J., Porcayo-Calderón, J., Salinas-Bravo, V. M., Arrieta-González, C. D., Gonzalez-Rodriguez, J. G., & Martinez-Gomez, L. (2013) · Mathematical Problems in Engineering · doi:10.1155/2013/542061 · Cited by 9
Qi, X., Song, G., Yang, S., Zhao, Y., & Lyu, Q. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b03288 · Cited by 9
Patil, V. G., Somasundaram, B., Kandaiah, S., Ramesh, M. R., & Kumar, S. (2022) · International Journal of Engineering · doi:10.5829/ije.2022.35.07a.19 · Cited by 9
Lyyränen, J., Jokiniemi, J. K., Kauppinen, E. I., & Silvonen, A. (2004) · Fuel Processing Technology · doi:10.1016/j.fuproc.2004.03.011 · Cited by 9
Statistical evaluation of corrosion of sialon in burner rig simulated combustion atmospheres
Ahari, K. G., Coleys, K. S., & Nicholls, J. R. (1997) · Journal of the European Ceramic Society · doi:10.1016/s0955-2219(96)00086-6 · Cited by 9
Performance of MCrAlX coatings : Oxidation, Hot corrosion and Interdiffusion
Zhang, P. (2019) · Linköping studies in science and technology. Dissertations · doi:10.3384/diss.diva-161511 · Cited by 8
High-temperature corrosion resistance of SiO 2 -forming materials
Kurokawa, K., Sudiro, T., Sano, T., Kyo, S., Ishibashi, O., & Nakamori, M. (2018) · Corrosion Reviews · doi:10.1515/corrrev-2017-0069 · Cited by 8
Corrosion of atomized Fe40Al based intermetallics in molten Na2SO4
Espinosa-Medina, M. A., la Torre, G. C. D., Porcayo-Calderón, J., Martínez-Villafañe, A., Chacón-Nava, J. G., Casales, M., & Gonzalez-Rodriguez, J. G. (2003) · Materials and Corrosion · doi:10.1002/maco.200390069 · Cited by 8
Frangini, S. (2006) · Materials and Corrosion · doi:10.1002/maco.200503887 · Cited by 8
Lyyränen, J. (2006) · Aaltodoc (Aalto University) · Cited by 8
Patil, A. R., & Vagge, S. T. (2023) · Strength of Materials · doi:10.1007/s11223-023-00551-2 · Cited by 7
2016 Frank Newman Speller Award:Understanding High-Temperature Corrosion—Key to Energy Efficiency?
Shifler, D. A. (2016) · CORROSION · doi:10.5006/2235 · Cited by 7
Khan, M. A., Chellaganesh, D., Uthayakumar, M., Jappes, J. T. W., & Duraiselvam, M. (2019) · Materials forming, machining and tribology · doi:10.1007/978-3-030-18854-2_11 · Cited by 7
Resistance of a Mo–Si–B-Based Coating to Environmental Salt-Based Hot Corrosion
Auchter, E., Taylor, M. A., & Perepezko, J. H. (2020) · Oxidation of Metals · doi:10.1007/s11085-020-09961-y · Cited by 7
Elevated temperature molten salt corrosion study of SS304L austenitic boiler steel
Mahajan, S., & Chhibber, R. (2020) · Sadhana · doi:10.1007/s12046-020-01416-z · Cited by 6
Ansari, M. S., Chawla, V., Bansal, A., & Aggarwal, V. (2021) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-021-06187-0 · Cited by 6
Zhang, P. (2018) · Linköping studies in science and technology. Thesis · doi:10.3384/lic.diva-145095 · Cited by 6
Garip, Y. (2026) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2026.188900 · Cited by 5
Hu, Q., Geng, S., Wang, J., Wang, F., Sun, Q., Xia, S., & Wu, Y. H. (2025) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2025.132413 · Cited by 5
Anodic oxidation of a Ni–Cr alloy in a molten electrolyte—effect of temperature and melt composition
Gencheva, P., & Tzvetkoff, T. B. (2005) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2005.01.056 · Cited by 5
Yuan, L., & Wang, H. M. (2009) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2008.12.138 · Cited by 5
Fatigue Behavior of Nickel Based Super Alloy 718 in a Hot Corrosive Environment
Prakash, R. V., Sampath, D., Ramakanth, J. V., Paulose, N., Narendrababu, S. N., & Mannan, S. L. (2014) · Materials Performance and Characterization · doi:10.1520/mpc20130039 · Cited by 4
Tjandra, J., Ranjan, A., Ackerman, A. K., Appleton, M., & Pedrazzini, S. (2023) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-023-07099-5 · Cited by 4
Factors That Influence the Performance of High-Temperature Coatings
Shifler, D. A. (2007) · NACE CORROSION Conference · doi:10.5006/c2007-07420 · Cited by 4
Ghanbari‐Ahari, K., & Coley, K. S. (1997) · Journal of the European Ceramic Society · doi:10.1016/s0955-2219(96)00197-5 · Cited by 4
Metadata
- Authors
- Rapp, R. A.
- Affiliations
- The Ohio State University (US)
- Corresponding author
- Rapp, Robert A
- Venue
- Materials Science and Engineering
- Publisher
- Elsevier BV
- Published
- 1987-03
- Volume
- 87
- Pages
- 319-327
- ISSN
- 0025-5416 (ISSN-L)
- OpenAlex
- W2027813190
- Cited by
- 155
- References
- 26
- Citations by year
- 2026: 9 · 2025: 8 · 2024: 6 · 2023: 8 · 2022: 6 · 2021: 12 · 2020: 5 · 2019: 9 · 2018: 6 · 2017: 3 · 2016: 4 · 2015: 2 · 2014: 7 · 2013: 7 · 2012: 1
- FWCI
- 4.35
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Materials Science and Engineering (publishedVersion)
- Topics
- Physical Sciences › Chemistry › Electrochemistry › Molten salt chemistry and electrochemical processes
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › High-Temperature Coating Behaviors
- Physical Sciences › Materials Science › Metals and Alloys › Metallurgical Processes and Thermodynamics
- Keywords
- hot corrosion, oxide solubility, Pourbaix diagrams, sodium sulfate, sodium metavanadate, acid solubility, electrochemical corrosion mechanism, metal oxides, iron oxide, chromium oxide, alumina
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
