The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
Bio-inspired hydrogel composed of hyaluronic acid and alginate as a potential bioink for 3D bioprinting of articular cartilage engineering constructs
Open accessAbstract
Bioprinting is a promising tool to fabricate well-organized cell-laden constructs for repair and regeneration of articular cartilage. The selection of a suitable bioink, in terms of composition and mechanical properties, is crucial for the development of viable cartilage substitutes. In this study, we focused on the use of one of the main cartilage components, hyaluronic acid (HA), to design and formulate a new bioink for cartilage tissue 3D bioprinting. Major characteristics required for this application such as printability, biocompatibility, and biodegradability were analyzed. To produce cartilage constructs with optimal mechanical properties, HA-based bioink was co-printed with polylactic acid (PLA). HA-based bioink was found to improve cell functionality by an increase in the expression of chondrogenic gene markers and specific matrix deposition and, therefore, tissue formation. These results indicate that it is a promising bioink candidate for cartilage tissue engineering based in 3D bioprinting. STATEMENT OF SIGNIFICANCE: The recent appearance of 3D printing technology has enabled great advances in the treatment of osteochondral disorders by fabrication of cartilage tissue constructs that restore and/or regenerate damaged tissue. In this attempt, the selection of a suitable biomaterial, in terms of composition and mechanical properties, is crucial. In this study, we describe for first time the development of a bioink based on the main component of cartilage, HA, with suitable biological and mechanical properties, without involving toxic procedure, and its application in cartilage tissue bioprinting. Hybrid constructs prepared by co-printing this bioink and thermoplastic polymer PLA provided an optimal niche for chondrocyte growth and maintenance as well as mechanical properties necessary to support load forces exerted in native tissue. We highlight the translation potential of this HA-based bioink in the clinical arena.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hyaluronic Acid Hydrogels for Biomedical Applications
Burdick, J. A., & Prestwich, G. D. (2011) · Advanced Materials · doi:10.1002/adma.201003963 · Cited by 2,139
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Bioink properties before, during and after 3D bioprinting
Hölzl, K., Lin, S., Tytgat, L., Van Vlierberghe, S., Gu, L., & Ovsianikov, A. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/032002 · Cited by 1,070
Cell-laden hydrogels for osteochondral and cartilage tissue engineering
Yang, J., Zhang, Y. S., Yue, K., & Khademhosseini, A. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.01.036 · Cited by 652
Kundu, J., Shim, J.-H., Jang, J., Kim, S.-W., & Cho, D.-W. (2015) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1682 · Cited by 552
Impact of rheological properties of mashed potatoes on 3D printing
Liu, Z., Zhang, M., Bhandari, B., & Yang, C. (2018) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2017.04.017 · Cited by 550
Moroni, L., de Wijn, J. R., & van Blitterswijk, C. A. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.07.023 · Cited by 534
Recent Advances in Biomaterials for 3D Printing and Tissue Engineering
Jammalamadaka, U., & Tappa, K. (2018) · Journal of Functional Biomaterials · doi:10.3390/jfb9010022 · Cited by 526
A comparison of different bioinks for 3D bioprinting of fibrocartilage and hyaline cartilage
Daly, A. C., Critchley, S. E., Rencsok, E. M., & Kelly, D. J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/4/045002 · Cited by 436
Bioprinting of hybrid tissue constructs with tailorable mechanical properties
Schuurman, W., Khristov, V, Pot, M. W., van Weeren, P. R., Dhert, W. J. A., & Malda, J. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/021001 · Cited by 409
3D bioprinting of methacrylated hyaluronic acid (MeHA) hydrogel with intrinsic osteogenicity
Poldervaart, M. T., Goversen, B., de Ruijter, M., Abbadessa, A., Melchels, F. P. W., Öner, F. C., Dhert, W. J. A., Vermonden, T., & Alblas, J. (2017) · PLOS ONE · doi:10.1371/journal.pone.0177628 · Cited by 357
Bioprinting Endothelial Cells With Alginate for 3D Tissue Constructs
Khalil, S., & Sun, W. (2009) · Journal of Biomechanical Engineering · doi:10.1115/1.3128729 · Cited by 337
3D-Printed ABS and PLA Scaffolds for Cartilage and Nucleus Pulposus Tissue Regeneration
Rosenzweig, D., Carelli, E., Steffen, T., Jarzem, P., & Haglund, L. (2015) · International Journal of Molecular Sciences · doi:10.3390/ijms160715118 · Cited by 326
Kesti, M., Müller, M., Becher, J., Schnabelrauch, M., D’Este, M., Eglin, D., & Zenobi-Wong, M. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.033 · Cited by 294
Kawasaki, K., Ochi, M., Uchio, Y., Adachi, N., & Matsusaki, M. (1999) · Journal of Cellular Physiology · doi:10.1002/(sici)1097-4652(199905)179:2<142::aid-jcp4>3.0.co;2-q · Cited by 274
Shim, J.-H., Jang, K.-M., Hahn, S. K., Park, J. Y., Jung, H., Oh, K., Park, K. M., Yeom, J., Park, S. H., Kim, S. W., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/014102 · Cited by 251
Optimization of collagen type I-hyaluronan hybrid bioink for 3D bioprinted liver microenvironments
Mazzocchi, A., Devarasetty, M., Huntwork, R., Soker, S., & Skardal, A. (2018) · Biofabrication · doi:10.1088/1758-5090/aae543 · Cited by 226
Marlovits, S., Hombauer, M., Truppe, M., Vècsei, V., & Schlegel, W. (2004) · The Journal of Bone and Joint Surgery. British volume · doi:10.1302/0301-620x.86b2.14918 · Cited by 208
Strategic Design and Fabrication of Engineered Scaffolds for Articular Cartilage Repair
Izadifar, Z., Chen, X., & Kulyk, W. (2012) · Journal of Functional Biomaterials · doi:10.3390/jfb3040799 · Cited by 203
The effects of hyaluronic acid on articular chondrocytes
Akmal, M., Singh, A., Anand, A., Kesani, A., Aslam, N., Goodship, A., & Bentley, G. (2005) · The Journal of Bone and Joint Surgery. British volume · doi:10.1302/0301-620x.87b8.15083 · Cited by 193
Erickson, I. E., Huang, A. H., Sengupta, S., Kestle, S., Burdick, J. A., & Mauck, R. L. (2009) · Osteoarthritis and Cartilage · doi:10.1016/j.joca.2009.07.003 · Cited by 186
Erickson, I. E., Kestle, S. R., Zellars, K. H., Farrell, M. J., Kim, M., Burdick, J. A., & Mauck, R. L. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.04.033 · Cited by 182
Three-dimensional printing of biological matters
Munaz, A., Vadivelu, R. K., St. John, J., Barton, M., Kamble, H., & Nguyen, N.-T. (2016) · Journal of Science: Advanced Materials and Devices · doi:10.1016/j.jsamd.2016.04.001 · Cited by 178
Application of Extrusion-Based Hydrogel Bioprinting for Cartilage Tissue Engineering
You, F., Eames, B. F., & Chen, X. (2017) · International Journal of Molecular Sciences · doi:10.3390/ijms18071597 · Cited by 178
Knudson, C. B. (2003) · Birth Defects Research Part C: Embryo Today: Reviews · doi:10.1002/bdrc.10013 · Cited by 176
Vinardell, T., Sheehy, E. J., Buckley, C. T., & Kelly, D. J. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0544 · Cited by 168
Kiyotake, E. A., Douglas, A. W., Thomas, E. E., Nimmo, S. L., & Detamore, M. S. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.01.041 · Cited by 166
Park, J., Lee, S. J., Chung, S., Lee, J. H., Kim, W. D., Lee, J. Y., & Park, S. A. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.10.069 · Cited by 158
Characterisation of hyaluronic acid methylcellulose hydrogels for 3D bioprinting
Law, N., Doney, B., Glover, H., Qin, Y., Aman, Z. M., Sercombe, T. B., Liew, L. J., Dilley, R. J., & Doyle, B. J. (2018) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.09.031 · Cited by 158
3D bioprinting of a hyaluronan bioink through enzymatic-and visible light-crosslinking
Petta, D., Armiento, A. R., Grijpma, D., Alini, M., Eglin, D., & D’Este, M. (2018) · Biofabrication · doi:10.1088/1758-5090/aadf58 · Cited by 158
Chung, C., Mesa, J. M., Randolph, M. A., Yaremchuk, M. J., & Burdick, J. A. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30660 · Cited by 147
Izadifar, Z., Chang, T., Kulyk, W. M., Chen, D., & Eames, B. F. (2015) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2015.0307 · Cited by 145
Ren, X., Wang, F., Chen, C., Gong, X., Yin, L., & Yang, L. (2016) · BMC Musculoskeletal Disorders · doi:10.1186/s12891-016-1130-8 · Cited by 143
Abbadessa, A., Mouser, V. H. M., Blokzijl, M. M., Gawlitta, D., Dhert, W. J. A., Hennink, W. E., Malda, J., & Vermonden, T. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b00366 · Cited by 135
Alginate hydrogels modified with low molecular weight hyaluronate for cartilage regeneration
Park, H., Lee, H. J., An, H.-S., & Lee, K. Y. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.01.045 · Cited by 134
Amann, E., Wolff, P., Breel, E. J., van Griensven, M., & Balmayor, E. R. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.01.064 · Cited by 126
Mouser, V. H. M., Abbadessa, A., Levato, R., Hennink, W. E., Vermonden, T., Gawlitta, D., & Malda, J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa6265 · Cited by 126
Francis, S. L., Bella, C. D., Wallace, G. G., & Choong, P. (2018) · Frontiers in Surgery · doi:10.3389/fsurg.2018.00070 · Cited by 104
Bio-ink development for three-dimensional bioprinting of hetero-cellular cartilage constructs
Mouser, V. H. M., Levato, R., Mensinga, A., Dhert, W. J. A., Gawlitta, D., & Malda, J. (2018) · Connective Tissue Research · doi:10.1080/03008207.2018.1553960 · Cited by 101
Development of Novel Three-Dimensional Printed Scaffolds for Osteochondral Regeneration
Holmes, B. B., Zhu, W., Li, J., Lee, J. D., & Zhang, L. G. (2014) · Tissue Engineering Part A · doi:10.1089/ten.tea.2014.0138 · Cited by 92
Three-Dimensional Bioprinting of Articular Cartilage: A Systematic Review
Wu, Y. B., Kennedy, P., Bonazza, N. A., Yu, Y., Dhawan, A., & Ozbolat, I. T. (2018) · Cartilage · doi:10.1177/1947603518809410 · Cited by 83
Cartilage regeneration using biodegradable oxidized alginate/hyaluronate hydrogels
Park, H., & Lee, K. Y. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35126 · Cited by 66
Sakai, S., Mochizuki, K., Qu, Y., Mail, M., Nakahata, M., & Taya, M. (2018) · Biofabrication · doi:10.1088/1758-5090/aadc9e · Cited by 55
Biofabrication for osteochondral tissue regeneration: bioink printability requirements
Abdulghani, S., & Morouço, P. (2019) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-019-6218-x · Cited by 48
Baena, J. M., Jiménez, G., López‐Ruiz, E., et al. (2019) · Experimental Biology and Medicine · doi:10.1177/1535370218821128 · Cited by 39
Self-citationPark, T. Y., Yang, Y. J., Ha, D., Cho, D., & Chi, H. J. (2019) · Biofabrication · doi:10.1088/1758-5090/ab0c6f · Cited by 35
Xu, Y., Guo, X. P., Yang, S., Li, L., Zhang, P., Sun, W., Liu, C., & Mi, S. (2018) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36368 · Cited by 33
López‐Ruiz, E., Jiménez, G., Kwiatkowski, W., Montañez‐Heredia, E., Arrebola, F., Carrillo, E., Choe, S., Marchal, J. A., & Perán, M. (2018) · European Cells and Materials · doi:10.22203/ecm.v035a15 · Cited by 20
Self-citation
Cited by
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Extrusion-Based 3D Printing Applications of PLA Composites: A Review
Tümer, E. H., & Erbil, H. Y. (2021) · Coatings · doi:10.3390/coatings11040390 · Cited by 454
Preparation of Alginate-Based Biomaterials and Their Applications in Biomedicine
Zhang, H., Cheng, J., & Ao, Q. (2021) · Marine Drugs · doi:10.3390/md19050264 · Cited by 416
Fabrication of Biomedical Scaffolds Using Biodegradable Polymers.
Kirillova, A., Yeazel, T. R., Asheghali, D., Petersen, S. R., Dort, S., Gall, K., & Becker, M. L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01200 · Cited by 368
Askari, M., Afzali Naniz, M., Kouhi, M., Saberi, A., Zolfagharian, A., & Bodaghi, M. (2021) · Biomaterials Science · doi:10.1039/d0bm00973c · Cited by 369
Metadata
- Authors
- Antich, C., de Vicente, J., Jiménez, G., Chocarro, C., Carrillo, E., Montañez, E., Gálvez-Martín, P., & Marchal, J. A.
- Venue
- Acta Biomaterialia
- Publisher
- Elsevier BV
- Published
- 2020-04
- Volume
- 106
- Pages
- 114-123
- ISSN
- 1742-7061 (ISSN-L)
- OpenAlex
- W3004139574
- Cited by
- 353
- References
- 49
- FWCI
- 15.70
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.