The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
3D printing of high density polyethylene by fused filament fabrication
Abstract
Abstract Polyolefin thermoplastics like high density polyethylene (HDPE) are the leaders in terms of world-scale plastics’ production, environmentally benign polymerization processes, recycling, and sustainability. However, additive manufacturing of HDPE by means of fused deposition modeling (FDM) also known as fused filament fabrication (FFF) has been problematic owing to its massive shrinkage, voiding and warpage problems accompanied by its poor adhesion to common build plates and to extruded HDPE strands. Herein we overcome these problems and improve Young’s modulus, tensile strength and surface quality of 3D printed HDPE by varying 3D printing parameters like temperature and diameter of the nozzle, extrusion rate, build plate temperature, and build plate material. Both nozzle diameter and printing speed affect surface quality but do not impair mechanical properties. Particularly, an extrusion rate gradient prevents void formation. For the first time additive manufactured HDPE and injection-molded HDPE exhibit similar mechanical properties with exception of elongation at break. Excellent fusion of the extruded polymer strands and the absence of anisotropy are achieved, as verified by microscopic imaging and measuring the tensile strength parallel and perpendicular to the 3D printing direction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Self-citation3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O’Donoghue, L., & Charitidis, C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.001 · Cited by 2,136
3D printing with polymers: Challenges among expanding options and opportunities
Stansbury, J. W., & Idacavage, M. J. (2016) · Dental Materials · doi:10.1016/j.dental.2015.09.018 · Cited by 1,732
Ning, F., Cong, W., Qiu, J., Wei, J., & Wang, S. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.06.013 · Cited by 1,718
Highly oriented carbon fiber–polymer composites via additive manufacturing
Tekinalp, H. L., Kunc, V., Velez-Garcia, G. M., Duty, C. E., Love, L. J., Naskar, A. K., Blue, C. A., & Ozcan, S. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.10.009 · Cited by 1,514
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
N. Turner, B., Strong, R., & A. Gold, S. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2013-0012 · Cited by 1,450
Tymrak, B. M., Kreiger, M., & Pearce, J. M. (2014) · Materials & Design · doi:10.1016/j.matdes.2014.02.038 · Cited by 1,244
Material issues in additive manufacturing: A review
Singh, S., Ramakrishna, S., & Singh, R. (2017) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2016.11.006 · Cited by 899
Fused deposition modeling with polypropylene
Carneiro, O. S., Silva, A. F., & Gomes, R. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.06.053 · Cited by 851
From Multisite Polymerization Catalysis to Sustainable Materials and All-Polyolefin Composites
Stürzel, M., Mihan, S., & Mülhaupt, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00310 · Cited by 822
Self-citationDickson, A. N., Barry, J. N., McDonnell, K. A., & Dowling, D. P. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.06.004 · Cited by 792
Turner, B. N., & Gold, S. A. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-02-2013-0017 · Cited by 770
Fused filament fabrication of fiber-reinforced polymers: A review
Brenken, B., Barocio, E., Favaloro, A., Kunc, V., & Pipes, R. B. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.01.002 · Cited by 737
Short fiber reinforced composites for fused deposition modeling
Zhong, W., Li, F., Zhang, Z., Song, L., & Li, Z. (2001) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(00)01810-4 · Cited by 721
Ning, F., Cong, W., Hu, Y., & Wang, H. (2017) · Journal of Composite Materials · doi:10.1177/0021998316646169 · Cited by 632
Development of new metal/polymer materials for rapid tooling using Fused deposition modelling
Masood, S. H., & Song, W. Q. (2004) · Materials & Design · doi:10.1016/j.matdes.2004.02.009 · Cited by 543
3D Printing of Continuous Carbon Fibre Reinforced Thermo-Plastic (CFRTP) Tensile Test Specimens
Der Klift, F. V., Koga, Y., Todoroki, A., Ueda, M., Hirano, Y., & Matsuzaki, R. (2016) · Open Journal of Composite Materials · doi:10.4236/ojcm.2016.61003 · Cited by 516
Fused deposition modelling with ABS–graphene nanocomposites
Dul, S., Fambri, L., & Pegoretti, A. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.03.013 · Cited by 491
Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites
Tian, X., Liu, T., Wang, Q., Dilmurat, A., Li, D., & Ziegmann, G. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.11.139 · Cited by 432
Sustainability Metrics: Life Cycle Assessment and Green Design in Polymers
Tabone, M. D., Cregg, J. J., Beckman, E. J., & Landis, A. E. (2010) · Environmental Science & Technology · doi:10.1021/es101640n · Cited by 416
Torrado, A. R., Shemelya, C. M., English, J. D., Lin, Y., Wicker, R. B., & Roberson, D. A. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.02.001 · Cited by 406
Kreiger, M. A., Mulder, M. L., Glover, A. G., & Pearce, J. M. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.02.009 · Cited by 350
Distributed recycling of waste polymer into RepRap feedstock
Baechler, C., DeVuono, M., & Pearce, J. M. (2013) · Rapid Prototyping Journal · doi:10.1108/13552541311302978 · Cited by 269
Spoerk, M., Savandaiah, C., Arbeiter, F., Traxler, G., Cardon, L., Holzer, C., & Sapkota, J. (2018) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2018.06.018 · Cited by 241
Zhang, W., Cotton, C., Sun, J., Heider, D., Gu, B., Sun, B., & Chou, T.-W. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.11.018 · Cited by 203
Chong, S., Pan, G., Khalid, M., Yang, T. C. ‐., Hung, S.-T., & Huang, C.-M. (2016) · Journal of Polymers and the Environment · doi:10.1007/s10924-016-0793-4 · Cited by 174
Milosevic, M., Stoof, D., & Pickering, K. (2017) · Journal of Composites Science · doi:10.3390/jcs1010007 · Cited by 173
Spoerk, M., Sapkota, J., Weingrill, G., Fischinger, T., Arbeiter, F., & Holzer, C. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201700143 · Cited by 169
Mechanical characterization of 3D printed polymers for fiber reinforced polymers processing
Türk, D.-A., Brenni, F., Zogg, M., & Meboldt, M. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.01.050 · Cited by 168
Novel ABS-based binary and ternary polymer blends for material extrusion 3D printing
Rocha, C. R., Perez, A. R. T., Roberson, D. A., Shemelya, C. M., MacDonald, E. W., & Wicker, R. B. (2014) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2014.158 · Cited by 157
Spoerk, M., Arbeiter, F. J., Raguž, I., Weingrill, G., Fischinger, T., Traxler, G., Schuschnigg, S., Cardon, L., & Holzer, C. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800179 · Cited by 149
Camacho, W., & Karlsson, S. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00192-1 · Cited by 145
Spoerk, M., Savandaiah, C., Arbeiter, F. J., Sapkota, J., & Holzer, C. (2017) · Polymer Composites · doi:10.1002/pc.24701 · Cited by 133
Tarrés, Q., Melbø, J. K., Delgado‐Aguilar, M., Espinach, F. X., Mutjé, P., & Chinga‐Carrasco, G. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.07.009 · Cited by 130
Spoerk, M., González-Gutiérrez, J., Lichal, C., Cajner, H., Berger, G., Schuschnigg, S., Cardon, L., & Holzer, C. (2018) · Polymers · doi:10.3390/polym10050490 · Cited by 123
Tailoring Hydrocarbon Polymers and All‐Hydrocarbon Composites for Circular Economy
Hees, T., Zhong, F., Stürzel, M., & Mülhaupt, R. (2019) · Macromolecular Rapid Communications · doi:10.1002/marc.201800608 · Cited by 100
Self-citationPolypropylene/Cellulose Composites for Material Extrusion Additive Manufacturing
Kaynak, B., Spoerk, M., Shirole, A., Ziegler, W., & Sapkota, J. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800037 · Cited by 93
Holmström, A., & Sörvik, E. M. (1978) · Journal of Polymer Science Polymer Chemistry Edition · doi:10.1002/pol.1978.170161012 · Cited by 91
3D Printable Filaments Made of Biobased Polyethylene Biocomposites
Filgueira, D., Holmen, S., Melbø, J. K., Moldes, D., Echtermeyer, A. T., & Chinga‐Carrasco, G. (2018) · Polymers · doi:10.3390/polym10030314 · Cited by 77
Meng, S., He, H., Jia, Y., Yu, P., Huang, B., & Chen, J. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44470 · Cited by 73
Investigations for melt flow index of Nylon6-Fe composite based hybrid FDM filament
Garg, H. K., & Singh, R. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2014-0056 · Cited by 43
Yee, A., & Decker, N. (2017) · International Journal of Additive and Subtractive Materials Manufacturing · doi:10.1504/ijasmm.2017.10009246 · Cited by 10
Decker, N., & Yee, A. (2017) · International Journal of Additive and Subtractive Materials Manufacturing · doi:10.1504/ijasmm.2017.088203 · Cited by 7
Cited by
Closed-loop recycling of polyethylene-like materials
Häußler, M., Eck, M., Rothauer, D., & Mecking, S. (2021) · Nature · doi:10.1038/s41586-020-03149-9 · Cited by 753
Fused deposition modeling: process, materials, parameters, properties, and applications
Rajan, K., Samykano, M., Kadirgama, K., Harun, W. S. W., & Rahman, M. M. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-08860-7 · Cited by 426
Fused filament fabrication of polymer materials: A review of interlayer bond
Gao, X., Qi, S., Kuang, X., Su, Y., Li, J., & Wang, D. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101658 · Cited by 418
Al-Maharma, A. Y., Patil, S. P., & Markert, B. (2020) · Materials Research Express · doi:10.1088/2053-1591/abcc5d · Cited by 404
Bhagia, S., Bornani, K., Agrawal, R., Satlewal, A., Ďurkovič, J., Lagaňa, R., Bhagia, M., Yoo, C. G., Zhao, X., Kunc, V., et al. (2021) · Applied Materials Today · doi:10.1016/j.apmt.2021.101078 · Cited by 337
Metadata
- Authors
- Schirmeister, C. G., Hees, T., Licht, E. H., & Mülhaupt, R.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 28
- Pages
- 152-159
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W2944803542
- Cited by
- 271
- References
- 45
- FWCI
- 13.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.