The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Current understanding and challenges in high temperature additive manufacturing of engineering thermoplastic polymers
Open accessAbstract
Abstract The strengths of additive manufacturing (AM), especially the tool-less manufacturing paradigm and rapid production of low-volume products, are well-aligned with the needs of manufacturing of expensive, high-temperature resistant, engineering thermoplastic polymers. High temperature polymer parts made with AM for either tooling or end-use applications have been implemented in the aerospace, automotive, and biomedical fields. However, parts made from these polymers using traditional manufacturing processes are generally high-value parts in low-quantity production runs. Moreover, AM processing of these polymers present significant challenges due to limitations associated with large thermal gradients, residual stress buildup, and interlayer adhesion as well as the inability of the printers to consistently maintain required high processing temperatures. This review highlights the current state of the art for processing high-temperature (i.e., traditional processing temperatures exceeding 250°C) thermoplastic polymers by the melt-based, AM processes of material extrusion (MatEx) and laser powder bed fusion (PBF). The authors address common challenges to AM of high-temperature polymers and gaps in fundamental understanding of the process-structure-property relationships needed to identify the machine design, process parameter selection, and synthetic modifications to enable processing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Yang, C., Tian, X., Li, D., Cao, Y., Zhao, F., & Shi, C. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.04.027 · Cited by 662
Ding, S., Zou, B., Wang, P., & Ding, H. (2019) · Polymer Testing · doi:10.1016/j.polymertesting.2019.105948 · Cited by 351
Effects of extrusion speed and printing speed on the 3D printing stability of extruded PEEK filament
Geng, P., Zhao, J., Wu, W., Ye, W., Wang, Y., Wang, S., & Zhang, S. (2019) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.11.023 · Cited by 321
Additive layer manufacturing of poly (ether ether ketone) via FDM
Rinaldi, M., Ghidini, T., Cecchini, F., Brandao, A., & Nanni, F. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.03.029 · Cited by 301
3D-printed PEEK-carbon fiber (CF) composites: Structure and thermal properties
Stepashkin, А. А., Chukov, D. I., Senatov, F. S., Salimon, A. I., Korsunsky, A. M., & Kaloshkin, S. D. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.05.032 · Cited by 293
Ajinjeru, C., Kishore, V., Lindahl, J., Sudbury, Z., Hassen, A. A., Post, B., Love, L., Kunc, V., & Duty, C. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-2510-z · Cited by 70
Cited by
Fused filament fabrication of polymer materials: A review of interlayer bond
Gao, X., Qi, S., Kuang, X., Su, Y., Li, J., & Wang, D. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101658 · Cited by 418
Unraveling of Advances in 3D-Printed Polymer-Based Bone Scaffolds
Xu, Y., Zhang, F., Zhai, W., Cheng, S., Li, J., & Wang, Y. (2022) · Polymers · doi:10.3390/polym14030566 · Cited by 349
Das, A., Gilmer, E. L., Biria, S., & Bortner, M. J. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c01228 · Cited by 305
Self-citationGilmer, E. L., Anderegg, D., Gardner, J. M., Sauti, G., Siochi, E. J., McKnight, S. H., Dillard, D. A., McIlroy, C., & Bortner, M. J. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102412 · Cited by 46
Self-citation
Metadata
- Authors
- Das, A., Chatham, C. A., Fallon, J. J., Zawaski, C. E., Gilmer, E. L., Williams, C. B., & Bortner, M. J.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2020-08
- Volume
- 34
- Pages
- 101218
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W3021455952
- Cited by
- 234
- References
- 8
- FWCI
- 10.10
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Current understanding and challenges in high temperature additive manufacturing of engineering thermoplastic polymers. https://app.cochat.ai/papers/10.1016/j.addma.2020.101218
- The paper
- Das, A., Chatham, C. A., Fallon, J. J., Zawaski, C. E., Gilmer, E. L., Williams, C. B., & Bortner, M. J. (2020). Current understanding and challenges in high temperature additive manufacturing of engineering thermoplastic polymers. Additive Manufacturing. https://doi.org/10.1016/j.addma.2020.101218
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.