The DOI matches its Crossref record; 93 of the 93 references it cites were found in a registry or an index.
3D printing for membrane separation, desalination and water treatment
Open accessAbstract
Abstract Additive manufacturing or commonly known as 3D printing is driving innovation in many industries and academic research including the water resource sector. The capability of 3D printing to fabricate complex objects in a fast and cost-effective manner makes it highly desirable over conventional manufacturing processes. Recent years have seen a rapid increase in research using 3D printing for membrane separation, desalination and water purification applications, potentially revolutionizing this field. This review focuses on recent advancements in 3D-printed materials and methods for water-related applications including developments in module spacers, novel filtration and desalination membranes, adsorbents, water remediation, solar steam generation materials, catalysis, etc. The emergence of new 3D printers with higher printing resolution, better efficiency, faster speed, and wider material applicability has garnered more interest and can potentially reshape research and development in this field. The promising potential, challenges and future prospects of 3D printing, additive manufacturing, and materials for water resource and treatment-related applications are all discussed in this review.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Heterogeneous photocatalyst materials for water splitting
Kudo, A., & Miseki, Y. (2009) · Chem. Soc. Rev. · doi:10.1039/b800489g · Cited by 10,585
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Materials for next-generation desalination and water purification membranes
Werber, J. R., Osuji, C. O., & Elimelech, M. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.18 · Cited by 2,888
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O’Donoghue, L., & Charitidis, C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.001 · Cited by 2,136
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., & Das, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.057 · Cited by 1,563
Fundamentals and applications of 3D printing for novel materials
Lee, J.-Y., An, J., & Chua, C. K. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.02.004 · Cited by 1,354
Mechanical characterization of 3D-printed polymers
Dizon, J. R. C., Espera, A. H., Chen, Q., & Advincula, R. C. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.12.002 · Cited by 1,340
Self-citationParametric appraisal of mechanical property of fused deposition modelling processed parts
Sood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2010) · Materials & Design · doi:10.1016/j.matdes.2009.06.016 · Cited by 1,318
A review on 3D micro-additive manufacturing technologies
Vaezi, M., Seitz, H., & Yang, S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,293
Inkjet-Printed Graphene Electronics
Torrisi, F., Hasan, T., Wu, W., Sun, Z., Lombardo, A., Kulmala, T. S., Hsieh, G.-W., Jung, S., Bonaccorso, F., Paul, P. J., et al. (2012) · ACS Nano · doi:10.1021/nn2044609 · Cited by 1,195
4D Printing: Multi‐Material Shape Change
Tibbits, S. (2014) · Architectural Design · doi:10.1002/ad.1710 · Cited by 1,188
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
Conductive Nanomaterials for Printed Electronics
Kamyshny, A., & Magdassi, S. (2014) · Small · doi:10.1002/smll.201303000 · Cited by 911
Emerging opportunities for nanotechnology to enhance water security
Alvarez, P. J. J., Chan, C. K., Elimelech, M., Halas, N. J., & Villagrán, D. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0203-2 · Cited by 897
Multimaterial magnetically assisted 3D printing of composite materials
Kokkinis, D., Schaffner, M., & Studart, A. R. (2015) · Nature Communications · doi:10.1038/ncomms9643 · Cited by 848
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
Li, Y., Gao, T., Yang, Z., Chen, C., Luo, W., Song, J., Hitz, E., Jia, C., Zhou, Y., Liu, B., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700981 · Cited by 720
A Tissue-Like Printed Material
Villar, G., Graham, A. D., & Bayley, H. (2013) · Science · doi:10.1126/science.1229495 · Cited by 613
Gnanasekaran, K., Heijmans, T., van Bennekom, S., Woldhuis, H., Wijnia, S., de With, G., & Friedrich, H. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.04.003 · Cited by 594
Hu, Y., Liu, X., Bai, J., Shih, K., Zeng, E. Y., & Cheng, H. (2013) · Environmental Science and Pollution Research · doi:10.1007/s11356-013-1668-z · Cited by 577
3D printed polyamide membranes for desalination
Chowdhury, M. R., Steffes, J., Huey, B. D., & McCutcheon, J. R. (2018) · Science · doi:10.1126/science.aar2122 · Cited by 570
Active printed materials for complex self-evolving deformations
Raviv, D., Zhao, W., McKnelly, C., Papadopoulou, A., Kadambi, A., Shi, B., Hirsch, S., Dikovsky, D., Zyracki, M., Olguin, C., et al. (2014) · Scientific Reports · doi:10.1038/srep07422 · Cited by 568
Advances in 3D printing of thermoplastic polymer composites and nanocomposites
Valino, A. D., Dizon, J. R. C., Espera, A. H., Chen, Q., Messman, J., & Advincula, R. C. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101162 · Cited by 565
Self-citationVaezi, M., Chianrabutra, S., Mellor, B., & Yang, S. (2013) · Virtual and Physical Prototyping · doi:10.1080/17452759.2013.778175 · Cited by 548
Yang, Y., Li, X., Zheng, X., Chen, Z., Zhou, Q., & Chen, Y. (2018) · Advanced Materials · doi:10.1002/adma.201704912 · Cited by 525
Material properties and fabrication parameters in selective laser sintering process
Gibson, I., & Shi, D. (1997) · Rapid Prototyping Journal · doi:10.1108/13552549710191836 · Cited by 488
Progress in 3D Printing of Carbon Materials for Energy‐Related Applications
Fu, K., Yao, Y., Dai, J., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201603486 · Cited by 475
High performance polymer nanocomposites for additive manufacturing applications
de Leon, A. C., Chen, Q., Palaganas, N. B., Palaganas, J. O., Manapat, J., & Advincula, R. C. (2016) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2016.04.010 · Cited by 467
Self-citationLow, Z.-X., Chua, Y. T., Ray, B. M., Mattia, D., Metcalfe, I. S., & Patterson, D. A. (2017) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.10.006 · Cited by 465
Faludi, J., Bayley, C., Bhogal, S., & Iribarne, M. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-07-2013-0067 · Cited by 431
Spacer characterization and pressure drop modelling in spacer-filled channels for ultrafiltration
da Costa, A. M. R., Fane, A. G., & Wiley, D. E. (1994) · Journal of Membrane Science · doi:10.1016/0376-7388(93)e0076-p · Cited by 423
Li, Y., Gao, T., Yang, Z., Chen, C., Kuang, Y., Song, J., Jia, C., Hitz, E. M., Yang, B., & Hu, L. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.09.034 · Cited by 416
4D printing of polymeric materials for tissue and organ regeneration
Miao, S., Castro, N., Nowicki, M., Xia, L., Cui, H., Zhou, X., Zhu, W., Lee, S.-J., Sarkar, K., Vozzi, G., et al. (2017) · Materials Today · doi:10.1016/j.mattod.2017.06.005 · Cited by 408
Azimi, P., Zhao, D., Pouzet, C., Crain, N. E., & Stephens, B. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.5b04983 · Cited by 389
Recent progress of membrane distillation using electrospun nanofibrous membrane
Tijing, L. D., Choi, J.-S., Lee, S., Kim, S.-H., & Shon, H. K. (2014) · Journal of Membrane Science · doi:10.1016/j.memsci.2013.11.022 · Cited by 380
Self-citation3D-printing and advanced manufacturing for electronics
Espera, A. H., Dizon, J. R. C., Chen, Q., & Advincula, R. C. (2019) · Progress in Additive Manufacturing · doi:10.1007/s40964-019-00077-7 · Cited by 356
Self-citationWang, P. (2018) · Environmental Science: Nano · doi:10.1039/c8en00156a · Cited by 336
The potential to enhance membrane module design with 3D printing technology
Lee, J.-Y., Tan, W. S., An, J., Chua, C. K., Tang, C. Y., Fane, A. G., & Chong, T. H. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2015.11.008 · Cited by 283
Zhang, Q., Zhang, K., & Hu, G. (2016) · Scientific Reports · doi:10.1038/srep22431 · Cited by 269
3D printing of a mechanically durable superhydrophobic porous membrane for oil–water separation
Lv, J., Gong, Z., He, Z., Yang, J., Chen, Y., Tang, C., Liu, Y., Fan, M., & Lau, W.-M. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02202f · Cited by 257
Kim, G. D., & Oh, Y. T. (2008) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1243/09544054jem724 · Cited by 238
Three-Dimensional Printing of pH-Responsive and Functional Polymers on an Affordable Desktop Printer
Nadgorny, M., Xiao, Z., Chen, C., & Connal, L. A. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b07388 · Cited by 234
Three‐dimensional Printing for Catalytic Applications: Current Status and Perspectives
Zhou, X., & Liu, C. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201701134 · Cited by 231
Thomas, N., Sreedhar, N., Al-Ketan, O., Rowshan, R., Abu Al-Rub, R. K., & Arafat, H. (2018) · Desalination · doi:10.1016/j.desal.2018.06.009 · Cited by 223
Emissions of Nanoparticles and Gaseous Material from 3D Printer Operation
Kim, Y., Yoon, C., Ham, S., Park, J., Kim, S., Kwon, O., & Tsai, P.-J. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b02805 · Cited by 220
Recent advances of nanomaterial-based membrane for water purification
Ying, Y., Ying, W., Li, Q., Meng, D., Ren, G., Yan, R., & Peng, X. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.02.010 · Cited by 211
Optimal channel spacer design for ultrafiltration
Da Costa, A. R., Fane, A. G., Fell, C. J. D., & Franken, A. C. M. (1991) · Journal of Membrane Science · doi:10.1016/0376-7388(91)80043-6 · Cited by 210
Novel spacers for mass transfer enhancement in membrane separations
Li, F., Meindersma, W., de Haan, A. B., & Reith, T. (2005) · Journal of Membrane Science · doi:10.1016/j.memsci.2004.12.019 · Cited by 204
Zhang, P., Liao, Q., Yao, H., Cheng, H., Huang, Y., Yang, C., Jiang, L., & Qu, L. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta05412f · Cited by 204
The role of nano-roughness in antifouling
Scardino, A. J., Zhang, H., Cookson, D. J., Lamb, R. N., & Nys, R. D. (2009) · Biofouling · doi:10.1080/08927010903165936 · Cited by 203
Sreedhar, N., Thomas, N., Al-Ketan, O., Rowshan, R., Hernandez, H., Abu Al-Rub, R. K., & Arafat, H. A. (2018) · Desalination · doi:10.1016/j.desal.2017.10.010 · Cited by 175
Photothermal Membrane Water Treatment for Two Worlds
Jun, Y.-S., Wu, X., Ghim, D., Jiang, Q., Cao, S., & Singamaneni, S. (2019) · Accounts of Chemical Research · doi:10.1021/acs.accounts.9b00012 · Cited by 174
Wang, Z., Wang, J., Li, M., Sun, K., & Liu, C.-J. (2014) · Scientific Reports · doi:10.1038/srep05939 · Cited by 170
A critical review of ferrate(VI)-based remediation of soil and groundwater
Rai, P. K., Lee, J., Kailasa, S. K., Kwon, E. E., Tsang, Y. F., Ok, Y. S., & Kim, K.-H. (2018) · Environmental Research · doi:10.1016/j.envres.2017.10.016 · Cited by 166
Kuksenok, O., & Balazs, A. C. (2016) · Materials Horizons · doi:10.1039/c5mh00212e · Cited by 162
Print your own membrane: direct rapid prototyping of polydimethylsiloxane
Femmer, T., Kuehne, A. J. C., & Wessling, M. (2014) · Lab on a Chip · doi:10.1039/c4lc00320a · Cited by 161
Bio-inspired hollow PDMS sponge for enhanced oil–water separation
Shin, J. H., Heo, J., Jeon, S., Park, J. H., Kim, S., & Kang, H. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2018.10.078 · Cited by 160
Jiang, Z., Tijing, L. D., Amarjargal, A., Park, C. H., An, K.-J., Shon, H. K., & Kim, C. S. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.03.067 · Cited by 159
Self-citationReversible shape-shifting in polymeric materials
Zhou, J., & Sheiko, S. S. (2016) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.24014 · Cited by 144
Emerging Carbon and Post-Carbon Nanomaterial Inks for Printed Electronics
Secor, E. B., & Hersam, M. C. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502431r · Cited by 142
3D printed floating photocatalysts for wastewater treatment
de Vidales, M. J. M., Nieto‐Marquéz, A., Morcuende, D., Atanes-Sánchez, E., Haro, F. B., Heras, E. S., & Fernández-Martínez, F. (2019) · Catalysis Today · doi:10.1016/j.cattod.2019.01.074 · Cited by 139
Multi-layer spacer geometries with improved mass transport
Balster, J., Punt, I. G. M., Stamatialis, D. F., & Weßling, M. (2006) · Journal of Membrane Science · doi:10.1016/j.memsci.2006.05.039 · Cited by 136
Development and characterization of 3D-printed feed spacers for spiral wound membrane systems
Siddiqui, A., Farhat, N. M., Bucs, S. S., Linares, R. V., Picioreanu, C., Kruithof, J. C., van Loosdrecht, M. C. M., Kidwell, J., & Vrouwenvelder, J. S. (2016) · Water Research · doi:10.1016/j.watres.2015.12.052 · Cited by 136
Yuan, S., Strobbe, D., Kruth, J., et al. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta08836a · Cited by 136
He, P., Tang, X., Chen, L., Xie, P., He, L., Zhou, H., Zhang, D., & Fan, T. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801121 · Cited by 136
3D printed composite membranes with enhanced anti-fouling behaviour
Al-Shimmery, A., Mazinani, S., Ji, J., Chew, Y. M. J., & Mattia, D. (2018) · Journal of Membrane Science · doi:10.1016/j.memsci.2018.12.058 · Cited by 132
Fouling resilient perforated feed spacers for membrane filtration
Kerdi, S., Qamar, A., Vrouwenvelder, J. S., & Ghaffour, N. (2018) · Water Research · doi:10.1016/j.watres.2018.04.049 · Cited by 130
Naghieh, S., Foroozmehr, E., Badrossamay, M., & Kharaziha, M. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.07.051 · Cited by 128
Lee, S. J., Heo, D. N., Park, J. S., Kwon, S. K., Lee, J. H., Lee, J. H., Kim, W. D., Kwon, I. K., & Park, S. A. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp04801f · Cited by 127
Yuan, S., Zhu, J., Li, Y., et al. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta10249j · Cited by 112
Rajzer, I., Kurowska, A., Jabłoński, A., Jatteau, S., Śliwka, M., Ziąbka, M., & Menaszek, E. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.06.012 · Cited by 111
3D printed spacers based on TPMS architectures for scaling control in membrane distillation
Thomas, N., Sreedhar, N., Al‐Ketan, O., et al. (2019) · Journal of Membrane Science · doi:10.1016/j.memsci.2019.03.039 · Cited by 97
Graff, P., Ståhlbom, B., Nordenberg, E., Graichen, A., Johansson, P., & Karlsson, H. (2016) · Journal of Industrial Ecology · doi:10.1111/jiec.12498 · Cited by 90
3D-printed ceramic structures with in situ grown whiskers for effective oil/water separation
Chen, Z., Zhang, D., Peng, E., & Ding, J. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.05.150 · Cited by 90
3D-printed highly porous and reusable chitosan monoliths for Cu(II) removal
Zhang, D., Xiao, J., Guo, Q., & Yang, J. (2019) · Journal of Materials Science · doi:10.1007/s10853-019-03332-y · Cited by 88
3D printing and surface imprinting technologies for water treatment: A review
Balogun, H. A., Sulaiman, R., Marzouk, S. S., Giwa, A., & Hasan, S. W. (2019) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2019.100786 · Cited by 88
Elliott, O., Gray, S., McClay, M., Nassief, B., Nunnelley, A., Vogt, E., Ekong, J., Kardel, K., Khoshkhoo, A., Proano-Pena, G., et al. (2017) · Journal of Contemporary Water Research & Education · doi:10.1111/j.1936-704x.2017.03246.x · Cited by 87
Tan, W. S., Suwarno, S. R., An, J., Chua, C. K., Fane, A. G., & Chong, T. H. (2017) · Journal of Membrane Science · doi:10.1016/j.memsci.2017.05.037 · Cited by 87
3D Printed Fouling-Resistant Composite Membranes
Mazinani, S., Al-Shimmery, A., Chew, Y. M. J., & Mattia, D. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b07764 · Cited by 86
Additive manufacturing of polymer-derived titania for one-step solar water purification
Vyatskikh, A., Kudo, A., Delalande, S., & Greer, J. R. (2018) · Materials Today Communications · doi:10.1016/j.mtcomm.2018.02.010 · Cited by 75
Dizon, J. R. C., Chen, Q., Valino, A. D., et al. (2018) · MRS Communications · doi:10.1557/mrc.2018.188 · Cited by 65
Self-citationTang, B., Song, H., Bin, L., Huang, S., Zhang, W., Fu, F., Zhao, Y., & Chen, Q. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.05.071 · Cited by 52
Czölderová, M., Behúl, M., Filip, J., Zajíček, P., Grabic, R., Staňová, A. V., Gál, M., Kerekeš, K., Hı́veš, J., Ryba, J., et al. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.05.089 · Cited by 45
3D Printing as Feasible Platform for On‐Site Building Oil‐Skimmer for Oil Collection from Spills
Yan, C., Ji, Z., Ma, S., et al. (2016) · Advanced Materials Interfaces · doi:10.1002/admi.201600015 · Cited by 44
Niesler, F., & Hermatschweiler, M. (2015) · Laser Technik Journal · doi:10.1002/latj.201500019 · Cited by 43
de Mimérand, Y. D. R., Li, K., & Guo, J. Y. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b06982 · Cited by 39
Xing, R., Yang, B., Huang, R., et al. (2019) · Langmuir · doi:10.1021/acs.langmuir.9b02131 · Cited by 39
Chen, Y., Gao, P., Summe, M. J., Phillip, W. A., & Wei, N. (2017) · Journal of Membrane Science · doi:10.1016/j.memsci.2017.12.045 · Cited by 15
Bio nano ink for 4D printing membrane proteins
Mathews, A. S., Abraham, S., Kumaran, S. K., Fan, J., & Montemagno, C. D. (2017) · RSC Advances · doi:10.1039/c7ra07650a · Cited by 14
Cited by
Pagac, M., Hajnys, J., Ma, Q.-P., Jancar, L., Jansa, J., Stefek, P., & Mesicek, J. (2021) · Polymers · doi:10.3390/polym13040598 · Cited by 834
Bundschuh, J., Kaczmarczyk, M., Ghaffour, N., & Tomaszewska, B. (2021) · Desalination · doi:10.1016/j.desal.2021.115035 · Cited by 338
Yuan, J., Lei, X., Yi, C., Jiang, H., Liu, F., & Cheng, G. J. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132765 · Cited by 289
Barakan, S., & Aghazadeh, V. (2021) · Environmental Science and Pollution Research · doi:10.1007/s11356-020-10985-9 · Cited by 255
Mallakpour, S., Azadi, E., & Hussain, C. M. (2021) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2021.102436 · Cited by 178
Metadata
- Authors
- Tijing, L. D., Dizon, J. R. C., Ibrahim, I., Nisay, A. R. N., Shon, H. K., & Advincula, R. C.
- Venue
- Applied Materials Today
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 18
- Pages
- 100486
- ISSN
- 2352-9407 (ISSN-L)
- OpenAlex
- W2981619679
- Cited by
- 269
- References
- 93
- FWCI
- 10.21
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.