Effects of surface characteristic on frosting and defrosting behaviors of fin-tube heat exchangers
Integrity signals
Registry
Cites
Statistics
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The uncertainty of the experimental frost layer thickness data in the cited side-view photo study is 10.1%.
“The uncertainty of the experimental data of the frost layer thickness is 10.1%.”
From Review on the measurement and calculation of frost characteristics (2018) · cites this paper as [108]
The super hydrophobic heat exchanger reduced the frost mass by 28.8% compared to the bare heat exchanger.
“The super hydrophobic heat exchanger reduced the frost thickness and mass by 17.2% and 28.8%, respectively, compared to the bare heat exchanger.”
The super hydrophobic heat exchanger reduced the frost thickness by 17.2% compared to the bare heat exchanger.
“The super hydrophobic heat exchanger reduced the frost thickness and mass by 17.2% and 28.8%, respectively, compared to the bare heat exchanger.”
Cites
Dropwise Condensation Modeling Suitable for Superhydrophobic Surfaces
Kim, S., & Kim, K. J. (2011) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.4003742 · Cited by 388 · see citing works
Frost formation on a super-hydrophobic surface under natural convection conditions
Liu, Z., Gou, Y., Wang, J., & Cheng, S. (2008) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2008.03.026 · Cited by 223 · see citing works
Experimental study on frost growth and dynamic performance of air source heat pump system
Guo, X.-M., Chen, Y.-G., Wang, W.-H., & Chen, C.-Z. (2008) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2008.01.007 · Cited by 173 · see citing works
界面熱的コンダクタンスのための音響的不整合モデルと拡散不整合モデルの間の内挿:InN/GaN超格子への適用
Kazan, M. (2011) · Cited by 116 · see citing works
Frosting and defrosting characteristics of a fin according to surface contact angle
Kim, K., & Lee, K.-S. (2011) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2011.02.065 · Cited by 108 · see citing works
Huang, L., Liu, Z., Liu, Y., Gou, Y., & Wang, J. (2009) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2009.06.002 · Cited by 108 · see citing works
Huang, D., Ri-Jing, Z., Liu, Y., & Yi, D.-B. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.11.052 · Cited by 99 · see citing works
Applying refrigerant mixtures with thermal glide in cold climate air-source heat pumps
Hakkaki-Fard, A., Aidoun, Z., & Ouzzane, M. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.10.033 · Cited by 97 · see citing works
Frosting and defrosting on rigid superhydrohobic surface
Jing, T., Kim, Y., Lee, S., Kim, D., Kim, J., & Hwang, W. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.02.105 · Cited by 95 · see citing works
Transient two-dimensional model of frost formation on a fin-and-tube heat exchanger
Lenic, K., Trp, A., & Frankovic, B. (2009) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2008.06.005 · Cited by 92 · see citing works
Kim, K., & Lee, K.-S. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.01.036 · Cited by 89 · see citing works
Drainage of frost melt water from vertical brass surfaces with parallel microgrooves
Rahman, M. A., & Jacobi, A. M. (2011) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2011.11.015 · Cited by 77 · see citing works
Okoroafor, E. U., & Newborough, M. (2000) · Applied Thermal Engineering · doi:10.1016/s1359-4311(99)00056-3 · Cited by 76 · see citing works
A new model for predicting performance of fin-and-tube heat exchanger under frost condition
Cui, J., Li, W. Z., Liu, Y., & Zhao, Y. S. (2011) · International Journal of Heat and Fluid Flow · doi:10.1016/j.ijheatfluidflow.2010.11.004 · Cited by 74 · see citing works
Song, M., Deng, S., Pan, D., & Mao, N. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.03.020 · Cited by 66 · see citing works
Lee, M., Kim, Y., Lee, H.-S., & Kim, Y. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.02.047 · Cited by 63 · see citing works
Rahman, M., & Jacobi, A. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.11.062 · Cited by 51 · see citing works
Dong, J., Jiang, Y., Yao, Y., & Zhang, X. (2011) · Journal of Central South University of Technology · doi:10.1007/s11771-011-0958-1 · Cited by 33 · see citing works
Self-citation
Flagged first, then by citations
Cited by
Sorted by citations
Zhang, P., & Lv, F. Y. (2015) · Energy · doi:10.1016/j.energy.2015.01.061 · Cited by 418 · see citing works
Review on improvement for air source heat pump units during frosting and defrosting
Song, M., Deng, S., Dang, C., Mao, N., & Wang, Z. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.12.022 · Cited by 384 · see citing works
She, X., Cong, L., Nie, B., Leng, G., Peng, H., Chen, Y., Zhang, X., Wen, T., Yang, H., & Luo, Y. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.09.067 · Cited by 281 · see citing works
Self-citationHeat transfer enhancement in fin-and-tube heat exchangers – A review on different mechanisms
Sadeghianjahromi, A., & Wang, C.-C. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110470 · Cited by 240 · see citing works
Amer, M., & Wang, C.-C. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.120 · Cited by 218 · see citing works
Review on the measurement and calculation of frost characteristics
Song, M., & Dang, C. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.03.094 · Cited by 212 · see citing works
Nguyen, D. H., & Ahn, H. S. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.121601 · Cited by 160 · see citing works
Research of anti-frosting technology in refrigeration and air conditioning fields: A review
Feng, W., Liang, C.-H., & Zhang, X. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.08.046 · Cited by 142 · see citing works
Self-citationCondensation frosting on meter-scale superhydrophobic and superhydrophilic heat exchangers
Boyina, K. S., Mahvi, A. J., Chavan, S., Park, D., Kumar, K., Lira, M., Yu, Y., Günay, A. A., Wang, X., & Miljkovic, N. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.118694 · Cited by 96 · see citing works
Mahvi, A. J., Boyina, K., Musser, A., Elbel, S., & Miljkovic, N. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.121162 · Cited by 92 · see citing works
A review on the air-to-air heat and mass exchanger technologies for building applications
Zeng, C., Liu, S., & Shukla, A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.11.052 · Cited by 91 · see citing works
Patil, M. S., Seo, J.-H., & Lee, M.-Y. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.11.107 · Cited by 86 · see citing works
Review of nature-inspired heat exchanger technology
Huang, Z., Hwang, Y., & Radermacher, R. (2017) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2017.03.006 · Cited by 77 · see citing works
Enhanced condensation heat transfer in air-conditioner heat exchanger using superhydrophobic foils
Wang, S., Yu, X., Liang, C., & Zhang, Y. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.04.020 · Cited by 71 · see citing works
Self-citationKim, M.-H., Kim, H., Kim, D. R., & Lee, K.-S. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.11.028 · Cited by 68 · see citing works
Zhang, L., Jiang, Y., Dong, J., Yao, Y., & Deng, S. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.09.016 · Cited by 65 · see citing works
Shen, Y., Jin, M., Wu, X., Tao, J., Luo, X., Chen, H., Yang, L. L., & Xie, Y. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.04.052 · Cited by 63 · see citing works
Wang, F., Zhou, Y., Yang, W., Ni, M., Zhang, X., & Liang, C. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.114967 · Cited by 60 · see citing works
Self-citationEffect of frost morphology on the thermal-hydraulic performance of fan-supplied tube-fin evaporators
da Silva, D. L., Melo, C., & Hermes, C. J. L. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.09.165 · Cited by 58 · see citing works
Implementing Superhydrophobic Surfaces within Various Condensation Environments: A Review
Singh, N. S., Zhang, J., Stafford, J., Anthony, C., & Gao, N. (2020) · Advanced Materials Interfaces · doi:10.1002/admi.202001442 · Cited by 56 · see citing works
Su, W., & Zhang, X. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.04.024 · Cited by 55 · see citing works
Self-citationGanesan, P., Vanaki, S., Thoo, K. K., & Chin, W.-M. (2016) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2016.02.017 · Cited by 55 · see citing works
Esmeryan, K., Castano, C., Mohammadi, R., Lazarov, Y., & Radeva, E. (2018) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/aaa188 · Cited by 45 · see citing works
Zheng, X., Shi, R., You, S.-J., Han, Y., & Shi, K. (2019) · Sustainable cities and society · doi:10.1016/j.scs.2019.101667 · Cited by 46 · see citing works
Pu, L., Liu, R., Huang, H., Zhang, S., Qi, Z., Xu, W., & Zhou, J. (2020) · Energy and Buildings · doi:10.1016/j.enbuild.2020.110382 · Cited by 50 · see citing works
Wu, X., Chu, F., Ma, Q., & Zhu, B. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.03.011 · Cited by 48 · see citing works
Su, W., Li, W., Zhou, J.-M., & Zhang, X. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.09.085 · Cited by 40 · see citing works
Self-citationDefrosting performance of superhydrophobic fin-tube heat exchanger
Feng, W., Liang, C.-H., Zhang, Y., & Zhang, X. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.11.028 · Cited by 47 · see citing works
Self-citationRealization of Superhydrophobic Surfaces Based on Three-Dimensional Printing Technology
Kang, B., Sung, J., & So, H. (2019) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-019-00163-9 · Cited by 46 · see citing works
Heu, C. S., Kim, S. W., Kim, J., Lee, S., Kim, J. M., Lee, K.-S., & Kim, D. R. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.04.146 · Cited by 45 · see citing works
Qu, M., Lu, M., Li, Z., Song, X., Chen, J., Ziviani, D., & Braun, J. E. (2020) · Energy and Buildings · doi:10.1016/j.enbuild.2020.110014 · Cited by 41 · see citing works
A novel hybrid frost detection and defrosting system for domestic refrigerators
Malik, A. N., Khan, S. A., & Lazoglu, I. (2020) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2020.05.016 · Cited by 44 · see citing works
Chang, S.-H., Jang, H., Jeon, J., Lee, K.-S., & Kim, D. R. (2020) · Energy and Buildings · doi:10.1016/j.enbuild.2020.110139 · Cited by 43 · see citing works
Review on frosting, defrosting and frost management techniques in industrial food freezers
Badri, D., Toublanc, C., Rouaud, O., & Michel Havet, C. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111545 · Cited by 43 · see citing works
Li, D., Qian, C.-L., Gao, S.-W., Zhao, X.-B., & Zhou, Y.-M. (2017) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2017.04.022 · Cited by 36 · see citing works
Zhang, Y., Zhang, G.-M., Zhang, A., Jin, Y., Ru, R.-R., & Tian, M.-C. (2018) · Energies · doi:10.3390/en11102642 · Cited by 37 · see citing works
Zhu, Z.-W., Zhang, Y., & Sun, D.-W. (2021) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2021.02.034 · Cited by 30 · see citing works
Wang, F., Liang, C., Yang, M., & Zhang, X. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.07.003 · Cited by 41 · see citing works
Self-citationLi, K., Xia, D., Luo, S., Zhao, Y., Tu, R., Zhou, X., Zhang, H., & Su, L. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117766 · Cited by 40 · see citing works
Wang, F., Liang, C., & Zhang, X. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.03.051 · Cited by 40 · see citing works
Self-citationZhang, L., Jiang, Y., Dong, J., Yao, Y., & Deng, S. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114063 · Cited by 40 · see citing works
Yang, S., Li, Q., Du, B., Ying, Y., Zeng, Y., Jin, Y., Qin, X., Gao, S., Wang, S., Wang, Z., et al. (2023) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/acef78 · Cited by 39 · see citing works
Feng, W., Liang, C.-H., Zhang, X., & Zhang, Y. (2018) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2018.01.022 · Cited by 32 · see citing works
Self-citationOpportunities in Nano-Engineered Surface Designs for Enhanced Condensation Heat and Mass Transfer
Ho, J. Y., Rabbi, K. F., Khodakarami, S., Ma, J., Boyina, K. S., & Miljkovic, N. (2022) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.4053454 · Cited by 39 · see citing works
Zhang, L., Song, M., Mao, N., & Dong, J. (2022) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.122192 · Cited by 38 · see citing works
Wei, W., Jin, X., Dong, Q., Ni, L., Zhao, S., Wang, W., & Sun, Y. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.119356 · Cited by 38 · see citing works
Sessile droplet freezing on polished and micro-micro-hierarchical silicon surfaces
Wang, Y., & Wang, Z. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.03.068 · Cited by 36 · see citing works
Frosting in heat pump evaporators part A: experimental investigation
Reichl, C., Sandström, C., Hochwallner, F., Linhardt, F., Popovac, M., & Emhofer, J. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117487 · Cited by 34 · see citing works
Tan, H., Zhang, X., Zhang, L., Tao, T., & Xu, G. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.01.094 · Cited by 35 · see citing works
Self-citationZhang, Y., He, F., Zhang, G.-M., Qu, X.-H., & Tian, M.-C. (2022) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2022.123416 · Cited by 32 · see citing works
Wang, F., Liang, C.-H., Yang, W.-B., & Zhang, X. (2020) · Energy and Buildings · doi:10.1016/j.enbuild.2020.110134 · Cited by 30 · see citing works
Self-citationZhang, L., Song, M., Hosseini, S. H., Shen, J., & Jiang, Y. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.122093 · Cited by 29 · see citing works
Sarmiento, A. P., de Sá Sarmiento, F. I. P., Shooshtari, A., & Ohadi, M. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.123680 · Cited by 29 · see citing works
Bharathidasan, T., & Sathyanaryanan, S. (2020) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2020.105828 · Cited by 29 · see citing works
Hu, H., Lai, Z., & Ding, G. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.01.010 · Cited by 28 · see citing works
Anti-frosting characteristics of superhydrophobic-hydrophilic wettability switchable surfaces
Lee, H., Yang, J. B., & Kim, D. R. (2023) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2023.125035 · Cited by 27 · see citing works
Feng, W., Liang, C.-H., & Zhang, X. (2016) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2016.01.008 · Cited by 27 · see citing works
Self-citationNakajima, D., Kikuchi, T., Natsui, S., & Suzuki, R. O. (2018) · RSC Advances · doi:10.1039/c8ra07712f · Cited by 27 · see citing works
Frosting in a heat pump evaporator part B: Numerical analysis
Popovac, M., Emhofer, J., & Reichl, C. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117488 · Cited by 26 · see citing works
Defrosting behavior and performance on vertical plate for surfaces of varying wettability
Kim, H., Jin, G., Jeon, J., Lee, K.-S., & Kim, D. R. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.12.054 · Cited by 25 · see citing works
Seo, D., Oh, S., Moon, B., Kim, H., Kim, J., Lee, C., & Nam, Y. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.08.131 · Cited by 26 · see citing works
Image processing for frost thickness measurement in fin-and-tube heat exchangers
Lee, W.-J., & Kyung Kwon, O. (2021) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2021.100937 · Cited by 25 · see citing works
Review and prospect of air source heat pump research: A bibliometric insight
Jiang, S., Zhao, H., & Ni, L. (2024) · International journal of refrigeration · doi:10.1016/j.ijrefrig.2024.11.029 · Cited by 20 · see citing works
Frost formation and freeze protection with bypass for counter-flow recuperators
Jedlikowski, A., Anisimov, S., Danielewicz, J., KARPUK, M. M., & Pandelidis, D. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.12.047 · Cited by 24 · see citing works
Abbas, S., & Park, C. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120883 · Cited by 25 · see citing works
Park, J.-S., Kim, J., & Lee, K.-S. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.01.043 · Cited by 24 · see citing works
Early stage condensation frosting characteristics on plain and nano Al2O3-epoxy mixture-coated brass
Wang, Y., & Cheng, Y. C. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.113971 · Cited by 24 · see citing works
Ye, Z., Shi, J., & Chen, J. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117066 · Cited by 23 · see citing works
Defrosting on horizontal hydrophobic surfaces and the shrink angle
Chu, F., Wu, X.-M., & Zhu, Y. (2016) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2016.08.005 · Cited by 23 · see citing works
Lee, W.-J., Bae, K. J., & Kwon, O. K. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115424 · Cited by 22 · see citing works
Li, K., Xia, D., Bao, J., Luo, S., Zhang, H., Liu, N., Su, L., & Sheng, L. (2021) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2021.101281 · Cited by 22 · see citing works
Anti-frosting operation and regulation technology of air-water dual-source heat pump evaporator
Zhong, H., Li, Z., Long, J., Xia, K., Lu, H., & Yongga, A. (2022) · Energy · doi:10.1016/j.energy.2022.124393 · Cited by 21 · see citing works
Gulfam, R., & Zhang, P. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.05.055 · Cited by 21 · see citing works
Wei, H., Li, Z., Guo, X., Yang, X., & Dong, W. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.122284 · Cited by 19 · see citing works
Performance study of an active-passive combined anti-frosting method for fin-tube heat exchanger
Lyu, N., Shao, Z., He, H., Wang, F., Liang, C., & Zhang, X. (2022) · Building and Environment · doi:10.1016/j.buildenv.2022.109365 · Cited by 19 · see citing works
Self-citationLiang, X.-Y., & Wu, L. (2022) · Energy and Buildings · doi:10.1016/j.enbuild.2022.112366 · Cited by 18 · see citing works
Yang, K.-S., Zheng, J.-W., Wu, K.-L., & Wu, Y.-L. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.121338 · Cited by 17 · see citing works
Xing, Q., Gu, Y., Han, Y., Li, S., Wang, B., Li, Y., & He, G. (2024) · International Journal of Heat and Fluid Flow · doi:10.1016/j.ijheatfluidflow.2024.109497 · Cited by 17 · see citing works
Suppressing Condensation Frosting Using an Out-of-Plane Dry Zone
Ahmadi, S. F., Spohn, C., Nath, S., & Boreyko, J. B. (2020) · Langmuir · doi:10.1021/acs.langmuir.0c03054 · Cited by 16 · see citing works
He, H. R., Lyu, N., Liang, C., Wang, F., & Zhang, X. (2023) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2023.124926 · Cited by 16 · see citing works
Self-citationAmer, M., & Wang, C.-C. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120560 · Cited by 17 · see citing works
Frost layer thickness measurement and calculation: A short review
Song, M., Dang, C., Liu, S.-C., Sun, Z.-L., & Mao, N. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.12.281 · Cited by 13 · see citing works
Wang, Y., & Wang, Z. (2019) · Journal of Coatings Technology and Research · doi:10.1007/s11998-018-00163-5 · Cited by 15 · see citing works
Calculation methodology for geometrical characteristics of the forming tool for rib cold rolling
Oleinik, A., Kapitanov, A., Alexandrov, I. A., & Tatarkanov, A. A. (2020) · Istrazivanja i projektovanja za privredu · doi:10.5937/jaes18-25211 · Cited by 14 · see citing works
Hu, W., Wang, J., Zhang, Y., Guan, Y., Lin, Y., & Zhao, S. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.119532 · Cited by 14 · see citing works
Superhydrophobic Microchannel Heat Exchanger for Electric Vehicle Heat Pump Performance Enhancement
Sui, Y., Sui, Z., Liang, G., & Wu, W. (2023) · Sustainability · doi:10.3390/su151813998 · Cited by 14 · see citing works
Wu, S., Zhao, R., Huang, D., Sun, Y. J., & Wei, X. (2020) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2020.12.010 · Cited by 15 · see citing works
Effect of surface wettability on dust removal characteristics during frosting cleaning process
Li, Y., Li, M., & Dang, C. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120592 · Cited by 14 · see citing works
Division of Frosting Type and Frosting Degree of the Air Source Heat Pump for Heating in China
Tang, R., Wang, F., Wang, Z., & Yang, W.-B. (2021) · Frontiers in Energy Research · doi:10.3389/fenrg.2021.708478 · Cited by 12 · see citing works
Self-citationLi, R., Wang, Z., Chen, M., Li, Z., Luo, X., Lu, J. W. Z., & Gu, Z. (2022) · Materials · doi:10.3390/ma15093060 · Cited by 13 · see citing works
Literature Review of Frost Formation Phenomena on Domestic Refrigerators Evaporators
Krasota, D., Błasiak, P., & Kolasiński, P. (2023) · Energies · doi:10.3390/en16072945 · Cited by 13 · see citing works
Rahman, H. U., Akbar, H., Malik, A. N., Nawaz, T. H., & Lazoğlu, İ. (2024) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2024.01.026 · Cited by 12 · see citing works
Experimental research on hot liquid defrosting system with multiple evaporators
Niu, J., Ma, G., & Xu, S. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115710 · Cited by 12 · see citing works
Designing a tool for cold knurling of fins
Olejnik, A., Kapitanov, A., Alexandrov, I. A., & Tatarkanov, A. A. (2020) · Istrazivanja i projektovanja za privredu · doi:10.5937/jaes18-25786 · Cited by 11 · see citing works
The effect of surface wettability on frost melting
Liu, Y., & Kulacki, F. A. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.07.104 · Cited by 10 · see citing works
Performance improvement of vapor compression heat pump with superhydrophobic finned-tube evaporator
Li, R., Wang, Z., Zhang, Y., Li, Z., Luo, X., Lu, J. W. Z., & Gu, Z. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.109013 · Cited by 10 · see citing works
Qiang, W., Lan, Z., Liu, Y., Liu, Y., Xu, W., Wen, R., & Ma, X. (2024) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2024.125139 · Cited by 8 · see citing works
Frosting Performance of a Nanoporous Hydrophilic Aluminum Surface
Yang, W.-S., Zeng, B., Zhang, Y.-M., He, S., & Zhao, X.-D. (2018) · Energies · doi:10.3390/en11123483 · Cited by 8 · see citing works
Investigation on thermal-hydraulic performance of outdoor heat exchanger in air sources heat pump
Fang, Z.-S., Li, L., Cheng, Y., Wang, H.-H., & Oladokun, M. (2017) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2017.01.008 · Cited by 6 · see citing works
Lyu, N., He, H. R., Liu, J., Liang, C., Zhang, X., & Wang, F. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.121430 · Cited by 7 · see citing works
Self-citation
- Authors
- Wang, F., Liang, C., Yang, M., Fan, C., & Zhang, X.
- Affiliations
- Southeast University (CN)
- Corresponding author
- Liang, Caihua
- Venue
- Applied Thermal Engineering
- Publisher
- Elsevier BV
- Published
- 2015-01
- Volume
- 75
- Pages
- 1126-1132
- ISSN
- 1359-4311 (ISSN-L)
- OpenAlex
- W2065119035
- Cited by
- 142
- References
- 18
- Citations by year
- 2026: 9 · 2025: 7 · 2024: 15 · 2023: 13 · 2022: 10 · 2021: 17 · 2020: 19 · 2019: 12 · 2018: 15 · 2017: 14 · 2016: 9 · 2015: 2
- FWCI
- 9.72
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Applied Thermal Engineering (publishedVersion)
- Funders
- National Natural Science Foundations of China (51106023)
- Five Year Science and Technology Support Key Project of China (2011BAJ03B14)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Refrigeration and Air Conditioning Technologies
- Physical Sciences › Engineering › Aerospace Engineering › Icing and De-icing Technologies
- Physical Sciences › Engineering › Mechanical Engineering › Heat Transfer and Optimization
- Keywords
- finned tube heat exchanger, frost formation, thawing, air-source heat pump, superhydrophobic surfaces, wettability, frost layer growth, frost melting, air-side pressure drop
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
