Tough and flexible CNT–polymeric hybrid scaffolds for engineering cardiac constructs
Open accessThe DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.
Abstract
In the past few years, a considerable amount of effort has been devoted toward the development of biomimetic scaffolds for cardiac tissue engineering. However, most of the previous scaffolds have been electrically insulating or lacked the structural and mechanical robustness to engineer cardiac tissue constructs with suitable electrophysiological functions. Here, we developed tough and flexible hybrid scaffolds with enhanced electrical properties composed of carbon nanotubes (CNTs) embedded aligned poly(glycerol sebacate):gelatin (PG) electrospun nanofibers. Incorporation of varying concentrations of CNTs from 0 to 1.5% within the PG nanofibrous scaffolds (CNT-PG scaffolds) notably enhanced fiber alignment and improved the electrical conductivity and toughness of the scaffolds while maintaining the viability, retention, alignment, and contractile activities of cardiomyocytes (CMs) seeded on the scaffolds. The resulting CNT-PG scaffolds resulted in stronger spontaneous and synchronous beating behavior (3.5-fold lower excitation threshold and 2.8-fold higher maximum capture rate) compared to those cultured on PG scaffold. Overall, our findings demonstrated that aligned CNT-PG scaffold exhibited superior mechanical properties with enhanced CM beating properties. It is envisioned that the proposed hybrid scaffolds can be useful for generating cardiac tissue constructs with improved organization and maturation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanometre diameter fibres of polymer, produced by electrospinning
Reneker, D. H., & Chun, I. (1996) · Nanotechnology · doi:10.1088/0957-4484/7/3/009 · Cited by 3,520
Nanotechnological strategies for engineering complex tissues
Dvir, T., Timko, B. P., Kohane, D. S., & Langer, R. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2010.246 · Cited by 1,367
Synthetic nano-scale fibrous extracellular matrix
Ma, P. X., & Zhang, R. (1999) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199907)46:1<60::aid-jbm7>3.0.co;2-h · Cited by 1,049
Engineered heart tissue grafts improve systolic and diastolic function in infarcted rat hearts
Zimmermann, W.-H., Melnychenko, I., Wasmeier, G., Didié, M., Naito, H., Nixdorff, U., Hess, A., Budinsky, L., Brune, K., Michaelis, B., et al. (2006) · Nature Medicine · doi:10.1038/nm1394 · Cited by 993
Carbon-Nanotube-Embedded Hydrogel Sheets for Engineering Cardiac Constructs and Bioactuators
Shin, S. R., Jung, S. M., Zalabany, M., Kim, K., Zorlutuna, P., Kim, S. B., Nikkhah, M., Khabiry, M., Azize, M., Kong, J., et al. (2013) · ACS Nano · doi:10.1021/nn305559j · Cited by 946 · cited 5×
“In another work, CNTs were employed to improve the mechanical properties of gelatin-based scaffolds for cardiac tissue engineering [8].”
BackgroundMethodResultInfluentialSelf-citationAccordion-like honeycombs for tissue engineering of cardiac anisotropy
Engelmayr, G. C., Cheng, M., Bettinger, C. J., Borenstein, J. T., Langer, R., & Freed, L. E. (2008) · Nature Materials · doi:10.1038/nmat2316 · Cited by 848
Nanowired three-dimensional cardiac patches
Dvir, T., Timko, B. P., Brigham, M. D., Naik, S. R., Karajanagi, S. S., Levy, O., Jin, H., Parker, K. K., Langer, R., & Kohane, D. S. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.160 · Cited by 760
Electrospinning of Continuous Carbon Nanotube‐Filled Nanofiber Yarns
Ko, F., Gogotsi, Y., Ali, A., Naguib, N., Ye, H., Yang, G. L., Li, C., & Willis, P. (2003) · Advanced Materials · doi:10.1002/adma.200304955 · Cited by 752
Woo, K. M., Chen, V. J., & Ma, P. X. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10098 · Cited by 714
Carbon Nanotube Substrates Boost Neuronal Electrical Signaling
Lovat, V., Pantarotto, D., Lagostena, L., Cacciari, B., Grandolfo, M., Righi, M., Spalluto, G., Prato, M., & Ballerini, L. (2005) · Nano Letters · doi:10.1021/nl050637m · Cited by 648 · cited 1×
“To further improve the electrical and mechanical properties of the scaffolds, a number of studies have relied on the incorporation of conductive nanomaterials such as gold nanoparticles and carbon nanotubes (CNTs) within polymeric matrices for neural or cardiac tissue engineering applications [19, 20].”
Background
Cited by
Diverse Applications of Nanomedicine
Pelaz, B., Alexiou, C., Alvarez-Puebla, R. A., Alves, F., Andrews, A. M., Ashraf, S., Balogh, L. P., Ballerini, L., Bestetti, A., Brendel, C., et al. (2017) · ACS Nano · doi:10.1021/acsnano.6b06040 · Cited by 1,350
Self-citationHan, L., Liu, K., Wang, M., Wang, K., Fang, L., Chen, H., Zhou, J., & Lu, X. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201704195 · Cited by 1,160
Bioprinting 3D microfibrous scaffolds for engineering endothelialized myocardium and heart-on-a-chip
Zhang, Y. S., Arneri, A., Bersini, S., Shin, S.-R., Zhu, K., Goli-Malekabadi, Z., Aleman, J., Colosi, C., Busignani, F., Dell'Erba, V., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.09.003 · Cited by 951
Self-citationFunctional and Biomimetic Materials for Engineering of the Three-Dimensional Cell Microenvironment
Huang, G., Li, F., Zhao, X., Ma, Y., Li, Y., Lin, M., Jin, G., Lu, T. J., Genin, G. M., & Xu, F. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00094 · Cited by 825
Liang, Y., Zhao, X., Hu, T., Han, Y., & Guo, B. (2019) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2019.08.083 · Cited by 586
Wu, Y., Wang, L., Guo, B., & Ma, P. X. (2017) · ACS Nano · doi:10.1021/acsnano.7b01062 · Cited by 472
Multifunctional GelMA platforms with nanomaterials for advanced tissue therapeutics
Kurian, A. G., Singh, R. K., Patel, K. D., Lee, J.-H., & Kim, H.-W. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.06.027 · Cited by 444
Emerging Biofabrication Strategies for Engineering Complex Tissue Constructs
Pedde, R. D., Mirani, B., Navaei, A., Styan, T., Wong, S., Mehrali, M., Thakur, A., Mohtaram, N. K., Bayati, A., Dolatshahi‐Pirouz, A., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606061 · Cited by 388
Self-citationInterplay between materials and microfluidics
Hou, X., Zhang, Y. S., Santiago, G. T.-D., Alvarez, M. M., Ribas, J., Jonas, S. J., Weiss, P. S., Andrews, A. M., Aizenberg, J., & Khademhosseini, A. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.16 · Cited by 387
Self-citationNavaei, A., Saini, H., Christenson, W., Sullivan, R. T., Ros, R., & Nikkhah, M. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.05.027 · Cited by 386
Self-citationElectrospinning versus microfluidic spinning of functional fibers for biomedical applications
Cheng, J., Jun, Y., Qin, J., & Lee, S.-H. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.10.040 · Cited by 370
Mehrali, M., Thakur, A., Pennisi, C. P., Talebian, S., Arpanaei, A., Nikkhah, M., & Dolatshahi‐Pirouz, A. (2017) · Advanced Materials · doi:10.1002/adma.201603612 · Cited by 345
Self-citationElectrospun conductive nanofibrous scaffolds for engineering cardiac tissue and 3D bioactuators
Wang, L., Wu, Y., Hu, T., Guo, B., & Ma, P. X. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.06.036 · Cited by 318
Biodegradable electronics: cornerstone for sustainable electronics and transient applications
Tan, M. J., Owh, C., Chee, P. L., Kyaw, A. K. K., Kai, D., & Loh, X. J. (2016) · Journal of Materials Chemistry C · doi:10.1039/c6tc00678g · Cited by 288
Polymer-based composites by electrospinning: Preparation & functionalization with nanocarbons
Lee, J. K. Y., Chen, N., Peng, S., Li, L., Tian, L., Thakor, N., & Ramakrishna, S. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.002 · Cited by 284
Fibers for hearts: A critical review on electrospinning for cardiac tissue engineering
Kitsara, M., Agbulut, O., Kontziampasis, D., Chen, Y., & Menasché, P. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.11.014 · Cited by 283
Nanohybrid hydrogels of laponite: PVA-Alginate as a potential wound healing material
Golafshan, N., Rezahasani, R., Tarkesh Esfahani, M., Kharaziha, M., & Khorasani, S. N. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.08.070 · Cited by 276
Self-citationNanoparticle–hydrogel superstructures for biomedical applications
Jiang, Y., Krishnan, N., Heo, J., Fang, R. H., & Zhang, L. (2020) · Journal of Controlled Release · doi:10.1016/j.jconrel.2020.05.041 · Cited by 266
Electrically Conductive Materials: Opportunities and Challenges in Tissue Engineering
Saberi, A., Jabbari, F., Zarrintaj, P., Saeb, M. R., & Mozafari, M. (2019) · Biomolecules · doi:10.3390/biom9090448 · Cited by 237
“Totally, their results showed that aligned CNT-PG scaffold have excellent mechanical attributes with elevated CM beating attributes [196].”
InfluentialInjectable and conductive cardiac patches repair infarcted myocardium in rats and minipigs
Wang, L., Liu, Y., Ye, G., He, Y., Li, B., Guan, Y., Gong, B., Mequanint, K., Xing, M. M. Q., & Qiu, X. (2021) · Nature Biomedical Engineering · doi:10.1038/s41551-021-00796-9 · Cited by 207
Advances in Carbon Nanotubes–Hydrogel Hybrids in Nanomedicine for Therapeutics
Vashist, A., Kaushik, A., Vashist, A., Sagar, V., Ghosal, A., Gupta, Y. K., Ahmad, S., & Nair, M. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701213 · Cited by 204
Incorporation of Conductive Materials into Hydrogels for Tissue Engineering Applications
Min, J. H., Patel, M., & Koh, W.-G. (2018) · Polymers · doi:10.3390/polym10101078 · Cited by 202
“developed a GelMA conductive hydrogel containing a UV-crosslinked gold nanorod (GNR) with improved biological and mechanical properties for cardiovascular tissue engineering (Figure 14) [163].”
BackgroundMethodGolafshan, N., Kharaziha, M., & Fathi, M. (2017) · Carbon · doi:10.1016/j.carbon.2016.10.042 · Cited by 194
“The conductivity of the polymeric suspensions provided a stronger electrical force in the electrospinning process leading to the enhanced elongation and decreased fiber size [41].”
BackgroundSelf-citationFrom cardiac tissue engineering to heart-on-a-chip: beating challenges
Zhang, Y. S., Aleman, J., Arneri, A., Bersini, S., Piraino, F., Shin, S. R., Dokmeci, M. R., & Khademhosseini, A. (2015) · Biomedical Materials · doi:10.1088/1748-6041/10/3/034006 · Cited by 189
Self-citationMoldable elastomeric polyester-carbon nanotube scaffolds for cardiac tissue engineering
Ahadian, S., Davenport Huyer, L., Estili, M., Yee, B., Smith, N., Xu, Z., Sun, Y., & Radisic, M. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.12.009 · Cited by 163
“The cell viability was then calculated based on the green intensity value divided by the sum of red and green intensities, as described previously [21,32,33].”
BackgroundMethodFibrous scaffolds for building hearts and heart parts
Capulli, A. K., MacQueen, L. A., Sheehy, S. P., & Parker, K. K. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2015.11.020 · Cited by 130
“threshold and increased maximum capture rate [226]”
InfluentialComposite biomaterial scaffolds for cardiac tissue engineering
Shapira, A., Feiner, R., & Dvir, T. (2016) · International Materials Reviews · doi:10.1179/1743280415y.0000000012 · Cited by 114
Suhaeri, M., Subbiah, R., Kim, S.-H., Kim, C.-H., Oh, S. J., Kim, S.-H., & Park, K. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b14020 · Cited by 44
Mao, M., Qu, X., Zhang, Y., Gu, B., Li, C., Liu, R., Li, X., Zhu, H., He, J., & Li, D. (2023) · Nature Communications · doi:10.1038/s41467-023-37716-1 · Cited by 42
Metadata
- Authors
- Kharaziha, M., Shin, S. R., Nikkhah, M., Topkaya, S. N., Masoumi, N., Annabi, N., Dokmeci, M. R., & Khademhosseini, A.
- Venue
- Biomaterials
- Publisher
- Elsevier BV
- Published
- 2014-08
- Volume
- 35
- Issue
- 26
- Pages
- 7346-7354
- ISSN
- 0142-9612 (ISSN-L)
- OpenAlex
- W2166935014
- Cited by
- 297
- References
- 53
- FWCI
- 8.75
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.