The DOI matches its Crossref record; 191 of the 191 references it cites were found in a registry or an index.
An overview of extrusion-based bioprinting with a focus on induced shear stress and its effect on cell viability
Abstract
Abstract Three dimensional bioprinting is an emerging fabrication technique in the field of tissue engineering. Extrusion-based bioprinting is one of the widely employed biofabrication techniques; researchers tend to use it because of its simplicity, affordability and scalability. During the extrusion-based bioprinting process, cells are subjected to mechanical forces of different kinds. Among these mechanical forces, shear stress is of a special significance and concern as it is considered the main cause of cell damage/death. This review covers the principle of extrusion-based bioprinting, and highlights extrusion-based bioprinting induced shear stress, how cells sense it and respond to it. Moreover, it discusses the bioinks that are commonly used in extrusion-based bioprinting along with their properties that have proven to have an effect on process induced shear stress and cell viability. In addition, it discusses, in detail, the relationship between shear stress, cell viability and different material properties and printing parameters. Furthermore, it provides examples of successfully extrusion-based bioprinted 3D tissues. Finally, it sheds light upon approaches to overcome shear stress effect and therefore preserve cell viability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Alginate: Properties and biomedical applications
Lee, K. Y., & Mooney, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.06.003 · Cited by 8,095
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Scaffolds in tissue engineering bone and cartilage
Hutmacher, D. W. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00121-6 · Cited by 4,994
Hydrogels in pharmaceutical formulations
Peppas, N. (2000) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/s0939-6411(00)00090-4 · Cited by 4,011
Mechanotransduction Across the Cell Surface and Through the Cytoskeleton
Wang, N., Butler, J. P., & Ingber, D. E. (1993) · Science · doi:10.1126/science.7684161 · Cited by 3,003
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Bone Tissue Engineering: Recent Advances and Challenges
Amini, A. R., Laurencin, C. T., & Nukavarapu, S. P. (2012) · Critical Reviews in Biomedical Engineering · doi:10.1615/critrevbiomedeng.v40.i5.10 · Cited by 2,336
Local force and geometry sensing regulate cell functions
Vogel, V., & Sheetz, M. (2006) · Nature Reviews Molecular Cell Biology · doi:10.1038/nrm1890 · Cited by 2,328
The design of scaffolds for use in tissue engineering. Part I. Traditional factors
Yang, S., Leong, K.-F., Du, Z., & Chua, C.-K. (2001) · Tissue Engineering · doi:10.1089/107632701753337645 · Cited by 2,234
Mechanotransduction and extracellular matrix homeostasis
Humphrey, J. D., Dufresne, E. R., & Schwartz, M. A. (2014) · Nature Reviews Molecular Cell Biology · doi:10.1038/nrm3896 · Cited by 2,124
Polyionic hydrocolloids for the intestinal delivery of protein drugs: alginate and chitosan—a review
George, M., & Abraham, T. E. (2006) · Journal of Controlled Release · doi:10.1016/j.jconrel.2006.04.017 · Cited by 2,012
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
Modeling physiological events in 2D vs. 3D cell culture
Duval, K., Grover, H., Han, L.-H., Mou, Y., Pegoraro, A. F., Fredberg, J., & Chen, Z. (2017) · Physiology · doi:10.1152/physiol.00036.2016 · Cited by 1,849
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
3D bioprinting for engineering complex tissues
Mandrycky, C., Wang, Z., Kim, K., & Kim, D.-H. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.12.011 · Cited by 1,754
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Chitosan and its derivatives for tissue engineering applications
Kim, I.-Y., Seo, S.-J., Moon, H.-S., Yoo, M.-K., Park, I.-Y., Kim, B.-C., & Cho, C.-S. (2008) · Biotechnology Advances · doi:10.1016/j.biotechadv.2007.07.009 · Cited by 1,433
Jaalouk, D. E., & Lammerding, J. (2009) · Nature Reviews Molecular Cell Biology · doi:10.1038/nrm2597 · Cited by 1,396
Alginate-Based Biomaterials for Regenerative Medicine Applications
Sun, J., & Tan, H. (2013) · Materials · doi:10.3390/ma6041285 · Cited by 1,361
Engineering vascularized skeletal muscle tissue
Levenberg, S., Rouwkema, J., Macdonald, M., Garfein, E. S., Kohane, D. S., Darland, D. C., Marini, R., van Blitterswijk, C. A., Mulligan, R. C., D'Amore, P. A., et al. (2005) · Nature Biotechnology · doi:10.1038/nbt1109 · Cited by 1,293
Organ printing: computer-aided jet-based 3D tissue engineering
Mironov, V., Boland, T., Trusk, T., Forgacs, G., & Markwald, R. R. (2003) · Trends in Biotechnology · doi:10.1016/s0167-7799(03)00033-7 · Cited by 1,276
Organ printing: Tissue spheroids as building blocks
Mironov, V., Visconti, R. P., Kasyanov, V., Forgacs, G., Drake, C. J., & Markwald, R. R. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.084 · Cited by 1,238
Ouyang, L., Yao, R., Zhao, Y., & Sun, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035020 · Cited by 1,045
3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances
Derakhshanfar, S., Mbeleck, R., Xu, K., Zhang, X., Zhong, W., & Xing, M. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.11.008 · Cited by 1,027
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
Paxton, N., Smolan, W., Böck, T., Melchels, F., Groll, J., & Jungst, T. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8dd8 · Cited by 950
Scaffold Design for Bone Regeneration
Polo-Corrales, L., Latorre-Esteves, M., & Ramirez-Vick, J. E. (2014) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2014.9127 · Cited by 945
Stability of Chitosan—A Challenge for Pharmaceutical and Biomedical Applications
Szymańska, E., & Winnicka, K. (2015) · Marine Drugs · doi:10.3390/md13041819 · Cited by 942
Williams, C. G., Malik, A. N., Kim, T. K., Manson, P. N., & Elisseeff, J. H. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.024 · Cited by 899
In vitro and in vivo degradation of films of chitin and its deacetylated derivatives
Tomihata, K., & Ikada, Y. (1997) · Biomaterials · doi:10.1016/s0142-9612(96)00167-6 · Cited by 821
Omnidirectional Printing of 3D Microvascular Networks
Wu, W., DeConinck, A., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201004625 · Cited by 819
Topical formulations and wound healing applications of chitosan
Ueno, H., Mori, T., & Fujinaga, T. (2001) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00189-2 · Cited by 811
Biofabrication strategies for 3D in vitro models and regenerative medicine
Moroni, L., Burdick, J. A., Highley, C., Lee, S. J., Morimoto, Y., Takeuchi, S., & Yoo, J. J. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0006-y · Cited by 753
Decellularization Strategies for Regenerative Medicine: From Processing Techniques to Applications
Gilpin, A., & Yang, Y. (2017) · BioMed Research International · doi:10.1155/2017/9831534 · Cited by 742
Design and Fabrication of Human Skin by Three-Dimensional Bioprinting
Lee, V., Singh, G., Trasatti, J. P., Bjornsson, C., Xu, X., Tran, T. N., Yoo, S.-S., Dai, G., & Karande, P. (2014) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2013.0335 · Cited by 725
(2013) · Springer eBooks · doi:10.1007/978-0-387-92897-5 · Cited by 714
Bishop, E. S., Mostafa, S., Pakvasa, M., Luu, H. H., Lee, M. J., Wolf, J. M., Ameer, G. A., He, T.-C., & Reid, R. R. (2017) · Genes & Diseases · doi:10.1016/j.gendis.2017.10.002 · Cited by 683
Red Blood Cell Damage by Shear Stress
Leverett, L. B., Hellums, J. D., Alfrey, C. P., & Lynch, E. C. (1972) · Biophysical Journal · doi:10.1016/s0006-3495(72)86085-5 · Cited by 682
Fibrin gels and their clinical and bioengineering applications
Janmey, P. A., Winer, J. P., & Weisel, J. W. (2009) · Journal of The Royal Society Interface · doi:10.1098/rsif.2008.0327 · Cited by 680
Advanced Bioinks for 3D Printing: A Materials Science Perspective
Chimene, D., Lennox, K. K., Kaunas, R. R., & Gaharwar, A. K. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1638-y · Cited by 679
Influence of the degree of acetylation on some biological properties of chitosan films
Chatelet, C. (2001) · Biomaterials · doi:10.1016/s0142-9612(00)00183-6 · Cited by 665
le Duc, Q., Shi, Q., Blonk, I., Sonnenberg, A., Wang, N., Leckband, D., & de Rooij, J. (2010) · Journal of Cell Biology · doi:10.1083/jcb.201001149 · Cited by 652
Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels
Bertassoni, L. E., Cardoso, J. C., Manoharan, V., Cristino, A. L., Bhise, N. S., Araujo, W. A., Zorlutuna, P., Vrana, N. E., Ghaemmaghami, A. M., Dokmeci, M. R., et al. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024105 · Cited by 642
Water-solubility of chitosan and its antimicrobial activity
QIN, C., LI, H., XIAO, Q., LIU, Y., ZHU, J., & DU, Y. (2006) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2005.09.023 · Cited by 636
3D bioprinting of tissues and organs for regenerative medicine
Vijayavenkataraman, S., Yan, W.-C., Lu, W. F., Wang, C.-H., & Fuh, J. Y. H. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.07.004 · Cited by 630
Chitosan and Its Potential Use as a Scaffold for Tissue Engineering in Regenerative Medicine
Rodríguez-Vázquez, M., Vega-Ruiz, B., Ramos-Zúñiga, R., Saldaña-Koppel, D. A., & Quiñones-Olvera, L. F. (2015) · BioMed Research International · doi:10.1155/2015/821279 · Cited by 626
Fabrication of Scaffolds for Bone-Tissue Regeneration
Chocholata, P., Kulda, V., & Babuska, V. (2019) · Materials · doi:10.3390/ma12040568 · Cited by 603
Kundu, J., Shim, J.-H., Jang, J., Kim, S.-W., & Cho, D.-W. (2015) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1682 · Cited by 552
Engineering alginate as bioink for bioprinting
Jia, J., Richards, D. J., Pollard, S., Tan, Y., Rodriguez, J., Visconti, R. P., Trusk, T. C., Yost, M. J., Yao, H., Markwald, R. R., et al. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.034 · Cited by 549
Chang, R., Nam, J., & Sun, W. (2008) · Tissue Engineering Part A · doi:10.1089/ten.a.2007.0004 · Cited by 549
Characterization of cell viability during bioprinting processes
Nair, K., Gandhi, M., Khalil, S., Yan, K. C., Marcolongo, M., Barbee, K., & Sun, W. (2009) · Biotechnology Journal · doi:10.1002/biot.200900004 · Cited by 510
Haque, F., Lloyd, D. J., Smallwood, D. T., Dent, C. L., Shanahan, C. M., Fry, A. M., Trembath, R. C., & Shackleton, S. (2006) · Molecular and Cellular Biology · doi:10.1128/mcb.26.10.3738-3751.2006 · Cited by 503
Extrusion Bioprinting of Shear‐Thinning Gelatin Methacryloyl Bioinks
Liu, W., Heinrich, M. A., Zhou, Y., Akpek, A., Hu, N., Liu, X., Guan, X., Zhong, Z., Jin, X., Khademhosseini, A., et al. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601451 · Cited by 503
Increasing Mechanical Strength of Gelatin Hydrogels by Divalent Metal Ion Removal
Xing, Q., Yates, K., Vogt, C., Qian, Z., Frost, M. C., & Zhao, F. (2014) · Scientific Reports · doi:10.1038/srep04706 · Cited by 479
Current Status of Bioinks for Micro-Extrusion-Based 3D Bioprinting
Panwar, A., & Tan, L. (2016) · Molecules · doi:10.3390/molecules21060685 · Cited by 472
A review of fibrin and fibrin composites for bone tissue engineering
Noori, A., Ashrafi, S. J., Vaez-Ghaemi, R., Hatamian-Zaremi, A., & Webster, T. J. (2017) · International Journal of Nanomedicine · doi:10.2147/ijn.s124671 · Cited by 458
Rapid signal transduction in living cells is a unique feature of mechanotransduction
Na, S., Collin, O., Chowdhury, F., Tay, B., Ouyang, M., Wang, Y., & Wang, N. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0711704105 · Cited by 449
Fedorovich, N. E., De Wijn, J. R., Verbout, A. J., Alblas, J., & Dhert, W. J. A. (2008) · Tissue Engineering Part A · doi:10.1089/ten.a.2007.0158 · Cited by 410
3D printing of composite tissue with complex shape applied to ear regeneration
Lee, J.-S., Hong, J. M., Jung, J. W., Shim, J.-H., Oh, J.-H., & Cho, D.-W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024103 · Cited by 407
Cell adhesion receptors in mechanotransduction
Schwartz, M. A., & DeSimone, D. W. (2008) · Current Opinion in Cell Biology · doi:10.1016/j.ceb.2008.05.005 · Cited by 404
Fedorovich, N. E., Schuurman, W., Wijnberg, H. M., Prins, H.-J., van Weeren, P. R., Malda, J., Alblas, J., & Dhert, W. J. A. (2012) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2011.0060 · Cited by 403
Naturally derived materials-based cell and drug delivery systems in skin regeneration
Huang, S., & Fu, X. (2010) · Journal of Controlled Release · doi:10.1016/j.jconrel.2009.10.018 · Cited by 390
The application of recombinant human collagen in tissue engineering
Yang, C., Hillas, P. J., B??ez, J. A., Nokelainen, M., Balan, J., Tang, J., Spiro, R., & Polarek, J. W. (2004) · BioDrugs · doi:10.2165/00063030-200418020-00004 · Cited by 385
Cardiac tissue engineering using tissue printing technology and human cardiac progenitor cells
Gaetani, R., Doevendans, P. A., Metz, C. H. G., Alblas, J., Messina, E., Giacomello, A., & Sluijter, J. P. G. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2011.11.003 · Cited by 383
Additive manufacturing techniques for the production of tissue engineering constructs
Mota, C., Puppi, D., Chiellini, F., & Chiellini, E. (2015) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1635 · Cited by 382
Biofabrication of tissue constructs by 3D bioprinting of cell-laden microcarriers
Levato, R., Visser, J., Planell, J. A., Engel, E., Malda, J., & Mateos-Timoneda, M. A. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035020 · Cited by 380
Three-Dimensional BioAssembly Tool for Generating Viable Tissue-Engineered Constructs
Smith, C. M., Stone, A. L., Parkhill, R. L., Stewart, R. L., Simpkins, M. W., Kachurin, A. M., Warren, W. L., & Williams, S. K. (2004) · Tissue Engineering · doi:10.1089/1076327042500274 · Cited by 373
A 3D bioprinted complex structure for engineering the muscle–tendon unit
Merceron, T. K., Burt, M., Seol, Y.-J., Kang, H.-W., Lee, S. J., Yoo, J. J., & Atala, A. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035003 · Cited by 373
Biomimetic 3D tissue printing for soft tissue regeneration
Pati, F., Ha, D.-H., Jang, J., Han, H. H., Rhie, J.-W., & Cho, D.-W. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.043 · Cited by 368
3D Bioprinting of Spatially Heterogeneous Collagen Constructs for Cartilage Tissue Engineering
Rhee, S., Puetzer, J. L., Mason, B. N., Reinhart-King, C. A., & Bonassar, L. J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00288 · Cited by 364
3D bioprinting of methacrylated hyaluronic acid (MeHA) hydrogel with intrinsic osteogenicity
Poldervaart, M. T., Goversen, B., de Ruijter, M., Abbadessa, A., Melchels, F. P. W., Öner, F. C., Dhert, W. J. A., Vermonden, T., & Alblas, J. (2017) · PLOS ONE · doi:10.1371/journal.pone.0177628 · Cited by 357
Human Skin 3D Bioprinting Using Scaffold‐Free Approach
Pourchet, L. J., Thepot, A., Albouy, M., Courtial, E. J., Boher, A., Blum, L. J., & Marquette, C. A. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601101 · Cited by 352
Dash, R., Foston, M., & Ragauskas, A. J. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.08.080 · Cited by 327
Production and utilization of products from commercial seaweeds
McHugh, D. J. (1987) · FAO eBooks · Cited by 314
Alemdaroğlu, C., Değim, Z., Çelebi, N., Zor, F., Öztürk, S., & Erdoğan, D. (2006) · Burns · doi:10.1016/j.burns.2005.10.015 · Cited by 313
Zhao, Y., Li, Y., Mao, S., Sun, W., & Yao, R. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045002 · Cited by 312
Skeletal muscle tissue engineering
Bach, A. D., Beier, J. P., Stern‐Staeter, J., & Horch, R. E. (2004) · Journal of Cellular and Molecular Medicine · doi:10.1111/j.1582-4934.2004.tb00466.x · Cited by 303
3D Bioprinting of Tissue/Organ Models
Pati, F., Gantelius, J., & Svahn, H. A. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201505062 · Cited by 301
3D Bioprinted Human Skeletal Muscle Constructs for Muscle Function Restoration
Kim, J. H., Seol, Y.-J., Ko, I. K., Kang, H.-W., Lee, Y. K., Yoo, J. J., Atala, A., & Lee, S. J. (2018) · Scientific Reports · doi:10.1038/s41598-018-29968-5 · Cited by 290
Yu, J., Du, K. T., Fang, Q., Gu, Y., Mihardja, S. S., Sievers, R. E., Wu, J. C., & Lee, R. J. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.05.078 · Cited by 280
Yu, Y., Zhang, Y., Martin, J. A., & Ozbolat, I. T. (2013) · Journal of Biomechanical Engineering · doi:10.1115/1.4024575 · Cited by 267
Control of stem cell fate and function by engineering physical microenvironments
Kshitiz, Park, J., Kim, P., Helen, W., Engler, A. J., Levchenko, A., & Kim, D.-H. (2012) · Integrative Biology · doi:10.1039/c2ib20080e · Cited by 267
Tabata, Y., Hijikata, S., & Ikada, Y. (1994) · Journal of Controlled Release · doi:10.1016/0168-3659(94)00035-2 · Cited by 257
The shear stress of it all: the cell membrane and mechanochemical transduction
White, C. R., & Frangos, J. A. (2007) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2007.2128 · Cited by 255
Basic biomechanics of the musculoskeletal system
Frankel, V. H., & Nordin, M. C. (2012) · Cited by 252
A brief review of extrusion‐based tissue scaffold bio‐printing
Ning, L., & Chen, X. (2017) · Biotechnology Journal · doi:10.1002/biot.201600671 · Cited by 251
Diamantides, N., Wang, L., Pruiksma, T., Siemiatkoski, J., Dugopolski, C., Shortkroff, S., Kennedy, S., & Bonassar, L. J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa780f · Cited by 250
Microfluidic Models of Vascular Functions
Wong, K. H. K., Chan, J. M., Kamm, R. D., & Tien, J. (2012) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-071811-150052 · Cited by 247
Fabrication of scaffolds in tissue engineering: A review
Zhao, P., Gu, H., Mi, H., Rao, C., Fu, J., & Turng, L.-S. (2018) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-018-0496-8 · Cited by 246
Extrusion bioprinting of soft materials: An emerging technique for biological model fabrication
Jiang, T., Munguia-Lopez, J. G., Flores-Torres, S., Kort-Mascort, J., & Kinsella, J. M. (2019) · Applied Physics Reviews · doi:10.1063/1.5059393 · Cited by 243
Rheological study on 3D printability of alginate hydrogel and effect of graphene oxide
Li, H., Liu, S., & Li, L. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.2016.02.007 · Cited by 239
Sun, M., Chi, G., Li, P., Lv, S., Xu, J., Xu, Z., Xia, Y., Tan, Y., Xu, J., Li, L., et al. (2018) · International Journal of Medical Sciences · doi:10.7150/ijms.21620 · Cited by 239
Cidonio, G., Glinka, M., Dawson, J. I., & Oreffo, R. O. C. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2019.04.009 · Cited by 238
Duarte Campos, D. F., Blaeser, A., Korsten, A., Neuss, S., Jäkel, J., Vogt, M., & Fischer, H. (2015) · Tissue Engineering Part A · doi:10.1089/ten.tea.2014.0231 · Cited by 229
Mechanotransduction: use the force(s)
Paluch, E. K., Nelson, C. M., Biais, N., Fabry, B., Moeller, J., Pruitt, B. L., Wollnik, C., Kudryasheva, G., Rehfeldt, F., & Federle, W. (2015) · BMC Biology · doi:10.1186/s12915-015-0150-4 · Cited by 229
CHAFFEY, N. (2003) · Annals of Botany · doi:10.1093/aob/mcg023 · Cited by 223
Noh, I., Kim, N., Tran, H. N., Lee, J., & Lee, C. (2019) · Biomaterials Research · doi:10.1186/s40824-018-0152-8 · Cited by 214
Can shear stress direct stem cell fate?
Stolberg, S., & McCloskey, K. E. (2009) · Biotechnology Progress · doi:10.1002/btpr.124 · Cited by 212
Zhao, F., Chella, R., & Ma, T. (2007) · Biotechnology and Bioengineering · doi:10.1002/bit.21184 · Cited by 212
Nesprins: from the nuclear envelope and beyond
Rajgor, D., & Shanahan, C. M. (2013) · Expert Reviews in Molecular Medicine · doi:10.1017/erm.2013.6 · Cited by 206
Advancing the field of 3D biomaterial printing
Jakus, A. E., Rutz, A. L., & Shah, R. N. (2016) · Biomedical Materials · doi:10.1088/1748-6041/11/1/014102 · Cited by 203
Zimmermann, U., Klöck, G., Federlin, K., Hannig, K., Kowalski, M., Bretzel, R. G., Horcher, A., Entenmann, H., Sieber, U., & Zekorn, T. (1992) · ELECTROPHORESIS · doi:10.1002/elps.1150130156 · Cited by 202
Evaluation of Photocrosslinked Lutrol Hydrogel for Tissue Printing Applications
Fedorovich, N. E., Swennen, I., Girones, J., Moroni, L., van Blitterswijk, C. A., Schacht, E., Alblas, J., & Dhert, W. J. A. (2009) · Biomacromolecules · doi:10.1021/bm801463q · Cited by 202
The involvement of CD14 in stimulation of cytokine production by uronic acid polymers
Espevik, T., Otterlei, M., Skjåk‐Braek, G., Ryan, L., Wright, S. D., & Sundan, A. (1993) · European Journal of Immunology · doi:10.1002/eji.1830230140 · Cited by 202
3D Bioprinting: A Novel Avenue for Manufacturing Tissues and Organs
Zhang, B., Gao, L., Ma, L., Luo, Y., Yang, H., & Cui, Z. (2019) · Engineering · doi:10.1016/j.eng.2019.03.009 · Cited by 195
Illi, B., Scopece, A., Nanni, S., Farsetti, A., Morgante, L., Biglioli, P., Capogrossi, M. C., & Gaetano, C. (2005) · Circulation Research · doi:10.1161/01.res.0000159181.06379.63 · Cited by 190
The arrival of commercial bioprinters – Towards 3D bioprinting revolution!
Choudhury, D., Anand, S., & Naing, M. W. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.v4i2.139 · Cited by 189
Neufurth, M., Wang, X., Schröder, H. C., Feng, Q., Diehl-Seifert, B., Ziebart, T., Steffen, R., Wang, S., & Müller, W. E. G. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.07.002 · Cited by 185
Ramshaw, J. A. M., Werkmeister, J. A., & Glattauer, V. (1996) · Biotechnology and Genetic Engineering Reviews · doi:10.1080/02648725.1996.10647934 · Cited by 182
Review of cellular mechanotransduction
Wang, N. (2017) · Journal of Physics D: Applied Physics · doi:10.1088/1361-6463/aa6e18 · Cited by 178
Application of Extrusion-Based Hydrogel Bioprinting for Cartilage Tissue Engineering
You, F., Eames, B. F., & Chen, X. (2017) · International Journal of Molecular Sciences · doi:10.3390/ijms18071597 · Cited by 178
Biomaterials for Tissue Engineering and Regenerative Medicine
Manoukian, O. S., Sardashti, N., Stedman, T., Gailiunas, K., Ojha, A., Penalosa, A., Mancuso, C. J., Hobert, M., & Kumbar, S. G. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-801238-3.64098-9 · Cited by 175
Kim, M. H., Lee, Y. W., Jung, W.-K., Oh, J., & Nam, S. Y. (2019) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2019.06.014 · Cited by 175
Chattopadhyay, D. P., & Inamdar, M. S. (2010) · International Journal of Polymer Science · doi:10.1155/2010/939536 · Cited by 173
Kay, A. G., Long, G., Tyler, G., Stefan, A. L., Broadfoot, S. J., Piccinini, A. M., Middleton, J., & Kehoe, O. (2017) · Scientific Reports · doi:10.1038/s41598-017-18144-w · Cited by 169
3D bioprinting of cell-laden electroconductive MXene nanocomposite bioinks
Rastin, H., Zhang, B., Mazinani, A., Hassan, K., Bi, J., Tung, T. T., & Losic, D. (2020) · Nanoscale · doi:10.1039/d0nr02581j · Cited by 166
Evaluation of an alginate–gelatine crosslinked hydrogel for bioplotting
Zehnder, T., Sarker, B., Boccaccini, A. R., & Detsch, R. (2015) · Biofabrication · doi:10.1088/1758-5090/7/2/025001 · Cited by 163
Ruvinov, E., Leor, J., & Cohen, S. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.02.026 · Cited by 162
Pati, F., Jang, J., Lee, J. W., & Cho, D. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-800972-7.00007-4 · Cited by 161
38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society
(2015) · IEEE Transactions on Medical Imaging · doi:10.1109/tmi.2015.2462411 · Cited by 160
Force-induced activation of Talin and its possible role in focal adhesion mechanotransduction
Lee, S. E., Kamm, R. D., & Mofrad, M. R. K. (2007) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2007.04.006 · Cited by 159
Rheological Characterization of Hydrogels from Alginate-Based Nanodispersion
Cuomo, F., Cofelice, M., & Lopez, F. (2019) · Polymers · doi:10.3390/polym11020259 · Cited by 159
The immunogenicity of injectable collagen. I. A 1-year prospective study
Cooperman, L. S., & Michaeli, D. (1984) · Journal of the American Academy of Dermatology · doi:10.1016/s0190-9622(84)80271-6 · Cited by 157
Viscoll collagen solution as a novel bioink for direct 3D bioprinting
Osidak, E. O., Karalkin, P. A., Osidak, M. S., Parfenov, V. A., Sivogrivov, D. E., Pereira, F. D. A. S., Gryadunova, A. A., Koudan, E. V., Khesuani, Y. D., Kasyanov, V. A., et al. (2019) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-019-6233-y · Cited by 155
Characterization of Cell Damage and Proliferative Ability during and after Bioprinting
Ning, L., Betancourt, N., Schreyer, D. J., & Chen, D. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00714 · Cited by 152
Itô, A., Mase, A., Takizawa, Y., Shinkai, M., Honda, H., Hata, K.-I., Ueda, M., & Kobayashi, T. (2003) · Journal of Bioscience and Bioengineering · doi:10.1016/s1389-1723(03)80129-9 · Cited by 143
Li, M., Tian, X., Schreyer, D. J., & Chen, D. (2011) · Biotechnology Progress · doi:10.1002/btpr.679 · Cited by 138
Shkarina, S., Shkarin, R., Weinhardt, V., Melnik, E. V., Vacun, G., Kluger, P. J., Loza, K., Epple, M., Ivlev, S. I., Baumbach, T., et al. (2018) · Scientific Reports · doi:10.1038/s41598-018-27097-7 · Cited by 137
Acceleration of Wound Healing by Gelatin Film Dressings with Epidermal Growth Factor
Tanaka, A., Nagate, T., & Matsuda, H. (2005) · Journal of Veterinary Medical Science · doi:10.1292/jvms.67.909 · Cited by 133
England, S., Rajaram, A., Schreyer, D. J., & Chen, D. (2016) · Bioprinting · doi:10.1016/j.bprint.2016.12.001 · Cited by 133
Potential applications of natural origin polymer-based systems in soft tissue regeneration
Silva, S. S., Mano, J. F., & Reis, R. L. (2010) · Critical Reviews in Biotechnology · doi:10.3109/07388551.2010.505561 · Cited by 132
Inoguchi, H., Tanaka, T., Maehara, Y., & Matsuda, T. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.09.020 · Cited by 129
Enzymatically Cross-Linked Tilapia Gelatin Hydrogels: Physical, Chemical, and Hybrid Networks
Bode, F., da Silva, M. A., Drake, A. F., Ross‐Murphy, S. B., & Dreiss, C. A. (2011) · Biomacromolecules · doi:10.1021/bm2009894 · Cited by 126
Patino, M. G., Neiders, M. E., Andreana, S., Noble, B. K., & Cohen, R. E. (2002) · Implant Dentistry · doi:10.1097/00008505-200207000-00014 · Cited by 123
Lab-on-a-chip technologies for stem cell analysis
Ertl, P., Sticker, D., Charwat, V., Kasper, C., & Lepperdinger, G. (2014) · Trends in biotechnology · doi:10.1016/j.tibtech.2014.03.004 · Cited by 122
Ouyang, L., Yao, R., Chen, X., Na, J., & Sun, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/1/015010 · Cited by 120
Fabrication and physical and biological properties of fibrin gel derived from human plasma
Zhao, H., Ma, L., Zhou, J., Mao, Z., Gao, C., & Shen, J. (2007) · Biomedical Materials · doi:10.1088/1748-6041/3/1/015001 · Cited by 119
Response of mesenchymal stem cells to shear stress in tissue-engineered vascular grafts
Dong, J., Gu, Y., Li, C., Wang, C.-R., Feng, Z., Qiu, R., Chen, B., Li, J., Zhang, S., Wang, Z., et al. (2009) · Acta Pharmacologica Sinica · doi:10.1038/aps.2009.40 · Cited by 117
Shimano, M., Ouchi, N., Shibata, R., Ohashi, K., Pimentel, D. R., Murohara, T., & Walsh, K. X. (2010) · Journal of Molecular and Cellular Cardiology · doi:10.1016/j.yjmcc.2010.02.021 · Cited by 112
Skeletal muscle tissue engineering: strategies for volumetric constructs
Cittadella, G., & Mantero, S. (2014) · Frontiers in Physiology · doi:10.3389/fphys.2014.00362 · Cited by 106
Bociąga, D., Bartniak, M., Grabarczyk, J., & Rosińska, K. (2019) · Materials · doi:10.3390/ma12172669 · Cited by 101
Sarker, M. D., & Chen, D. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4036226 · Cited by 92
Lepowsky, E., Muradoğlu, M., & Taşoğlu, S. (2018) · Bioprinting · doi:10.1016/j.bprint.2018.e00034 · Cited by 89
Hope Versus Hype: What Can Additive Manufacturing Realistically Offer Trauma and Orthopedic Surgery?
Gibbs, D., Vaezi, M., Yang, S., & Oreffo, R. O. C. (2014) · Regenerative Medicine · doi:10.2217/rme.14.20 · Cited by 81
Red blood cell mechanics and capillary blood rheology
Secomb, T. W. (1991) · Cell Biophysics · doi:10.1007/bf02989816 · Cited by 80
Thermal denaturation of collagen revisited
Miles, C. A., & Bailey, A. J. (1999) · Journal of Chemical Sciences · doi:10.1007/bf02869897 · Cited by 77
Chang, R. C., Nam, J., & Sun, W. (2007) · Tissue Engineering · doi:10.1089/ten.2007.0004 · Cited by 75
Three-dimensional (3D) printing of mouse primary hepatocytes to generate 3D hepatic structure
Kim, Y., Kang, K., Jeong, J., Paik, S. S., Kim, J. S., Park, S. A., Kim, W. D., Park, J., & Choi, D. (2017) · Annals of Surgical Treatment and Research · doi:10.4174/astr.2017.92.2.67 · Cited by 73
Molecular structure of collagen in solution: comparison of types I, II, III and V
Silver, F. H., & Birk, D. E. (1984) · International Journal of Biological Macromolecules · doi:10.1016/0141-8130(84)90052-7 · Cited by 72
Non‐Newtonian Polymer–Nanoparticle Hydrogels Enhance Cell Viability during Injection
Hernandez, H. L., Grosskopf, A. K., Stapleton, L. M., Roth, G. A., & Appel, E. A. (2018) · Macromolecular Bioscience · doi:10.1002/mabi.201800275 · Cited by 71
Veraitch, F. S., Scott, R., Wong, J. P. F., Lye, G. J., & Mason, C. (2007) · Biotechnology and Bioengineering · doi:10.1002/bit.21673 · Cited by 69
Effect of stiffness of polycaprolactone (PCL) membrane on cell proliferation
Tan, P., & Teoh, S. H. (2006) · Materials Science and Engineering C · doi:10.1016/j.msec.2006.03.010 · Cited by 68
Neffe, A. T., Loebus, A., Zaupa, A., Stötzel, C., Müller, F. A., & Lendlein, A. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.11.025 · Cited by 65
Back to the heart: The protective role of adiponectin
Caselli, C., D’Amico, A., Cabiati, M., Prescimone, T., Ry, S. D., & Giannessi, D. (2014) · Pharmacological Research · doi:10.1016/j.phrs.2014.03.003 · Cited by 65
Immunogenicity of collagenous implants
Meade, K. R., & Silver, F. H. (1990) · Biomaterials · doi:10.1016/0142-9612(90)90151-f · Cited by 60
Viljoen, J. M., Steenekamp, J. H., Marais, A. F., et al. (2013) · Drug Development and Industrial Pharmacy · doi:10.3109/03639045.2013.782501 · Cited by 60
Liao, H., Zhang, H., & Chen, W. (2009) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-009-3694-4 · Cited by 59
Yuan, S., Xiong, G. M., Roguin, A., & Choong, C. S. N. (2012) · Biointerphases · doi:10.1007/s13758-012-0030-1 · Cited by 59
Molecular stability of chitosan in acid solutions stored at various conditions
Nguyễn, T. T. B., Hein, S., Ng, C., et al. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.27376 · Cited by 58
Microfluidic assessment of mechanical cell damage by extensional stress.
Bae, Y. B., Jang, H., Shin, T., Phukan, G., Tran, T. T., Lee, G., Hwang, W., & Kim, J. M. (2016) · Lab on a Chip · doi:10.1039/c5lc01006c · Cited by 58
Rapid prototyping technology for bone regeneration
Kundu, J., Pati, F., Shim, J., & Cho, D.-W. (2014) · Elsevier eBooks · doi:10.1533/9780857097217.254 · Cited by 54
Mesenchymal Stem Cell Therapy on Tendon/Ligament Healing
Chamberlain, C. S., Saether, E. E., Vanderby, R., & Aktaş, E. (2017) · Journal of Cytokine Biology · doi:10.4172/2576-3881.1000112 · Cited by 54
3D and 4D Printing in Biomedical Applications
(2018) · Wiley eBooks · doi:10.1002/9783527813704 · Cited by 54
Burdick, J. A., & Stevens, M. M. (2005) · Elsevier eBooks · doi:10.1533/9781845690861.2.107 · Cited by 52
Cellular inflammatory response to porcine collagen membranes
Patino, M. G., Neiders, M. E., Andreana, S., Noble, B. K., & Cohen, R. E. (2003) · Journal of Periodontal Research · doi:10.1034/j.1600-0765.2003.00017.x · Cited by 51
Moehlenbrock, M. J., Price, A. K., & Martin, R. S. (2006) · The Analyst · doi:10.1039/b605136g · Cited by 51
Clinical Perspectives on 3D Bioprinting Paradigms for Regenerative Medicine
Loai, S., Kingston, B. R., Wang, Z., Philpott, D. N., Tao, M., & Cheng, H.-L. M. (2019) · Regenerative Medicine Frontiers · doi:10.20900/rmf20190004 · Cited by 51
A Molecular Dynamics Investigation of Vinculin Activation
Golji, J., & Mofrad, M. R. K. (2010) · Biophysical Journal · doi:10.1016/j.bpj.2010.05.024 · Cited by 49
MODELING MECHANICAL CELL DAMAGE IN THE BIOPRINTING PROCESS EMPLOYING A CONICAL NEEDLE
Li, M., TIAN, X., Koziński, J. A., Chen, D., & Hwang, D. K. (2015) · Journal of Mechanics in Medicine and Biology · doi:10.1142/s0219519415500736 · Cited by 48
Fedorovich, N. E., de Wijn, J. R., Verbout, A. J., et al. (2008) · Tissue Engineering · doi:10.1089/ten.2007.0158 · Cited by 48
Biomechanical Characteristics of the Bone
Bankoff, A. D. P. (2012) · InTech eBooks · doi:10.5772/19690 · Cited by 47
Classical and Nonclassical Techniques for Secondary Metabolite Production in Plant Cell Culture
Bhatia, S., & Bera, T. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-802221-4.00007-8 · Cited by 42
Biodegradable Polymeric Materials
Saad, B., & Suter, U. W. (2001) · Elsevier eBooks · doi:10.1016/b0-08-043152-6/00105-4 · Cited by 40
Drug delivery systems based on nonimmunogenic biopolymers
García, M. C. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-101750-0.00012-x · Cited by 38
Extrusion-Based Biofabrication in Tissue Engineering and Regenerative Medicine
Hospodiuk, M., Moncal, K. K., Dey, M., & Ozbolat, I. T. (2016) · Springer eBooks · doi:10.1007/978-3-319-40498-1_10-1 · Cited by 35
Tissue strands as “bioink” for scale-up organ printing
Yu, Y., & Ozbolat, I. T. (2014) · Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) · doi:10.1109/embc.2014.6943868 · Cited by 32
Kraut, G., Yenchesky, L., Prieto, F., Tovar, G. E. M., & Southan, A. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45083 · Cited by 31
3D bioprinting adipose tissue for breast reconstruction
Chae, M. P., Hunter‐Smith, D. J., Murphy, S. V., & Findlay, M. W. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-101103-4.00028-4 · Cited by 26
Bammesberger, S., Ernst, A., Losleben, N., Tanguy, L., Zengerle, R., & Koltay, P. (2012) · Drug Discovery Today · doi:10.1016/j.drudis.2012.12.001 · Cited by 22
Tissue Strands as “Bioink” for Scale-up Organ Printing
Yu, Y., & Ozbolat, I. (2014) · doi:10.13140/2.1.4005.0567 · Cited by 22
Deposition and structural formation of 3D alginate tissue scaffolds
Khalil, S., & Sun, W. (2005) · doi:10.17918/etd-664 · Cited by 20
Zhao, L., Fan, C., Yu, Z., Yang, Y., Wang, D., Deng, C., Hu, W. M., Ma, Z., Jiang, S., Di, S., et al. (2016) · Scientific Reports · doi:10.1038/srep28752 · Cited by 19
Boccafoschi, F., Ramella, M., Fusaro, L., Catoira, M. C., & Casella, F. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-801238-3.10997-3 · Cited by 19
Eccentric Exercise: Physiology and application in sport and rehabilitation
Hoppeler, H. H. (2014) · Cited by 18
3D bioprinting of alginate scaffolds with controlled micropores by leaching of recrystallized salts
Wei, X., Luo, Y., & Huang, P. (2019) · Polymer Bulletin · doi:10.1007/s00289-019-02690-6 · Cited by 18
Skeletal muscle tissue engineering: best bet or black beast?
Perniconi, B., & Coletti, D. (2014) · Frontiers in Physiology · doi:10.3389/fphys.2014.00255 · Cited by 15
Flores, A. A., & Wang, H. (2017) · Annals of Plastic Surgery · doi:10.1097/sap.0000000000001259 · Cited by 13
3D Printing for Cell Therapy Applications
Leberfinger, A. N., Moncal, K. K., Ravnic, D. J., & Ozbolat, I. T. (2017) · Molecular and translational medicine · doi:10.1007/978-3-319-57153-9_11 · Cited by 11
Multiwalled carbon nanotube-based nanocomposites for artificial bone grafting
Perveen, R., Inamuddin, I., & Nasar, A. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-813740-6.00006-5 · Cited by 9
Manufacturing of Biomaterials via a 3D Printing Platform
Thayer, P., Martinez, H., & Gatenholm, E. (2018) · Wiley eBooks · doi:10.1002/9783527813704.ch4 · Cited by 5
Skeletal Muscle Tissue Engineering System to Mimic In Vivo Development
Greco, S. C., Fidanza, A. M., Fitzgibbon, J. J., & Pfizenmaier, T. M. (2013) · Cited by 2
Cited by
Zhang, Y. S., Haghiashtiani, G., Hübscher, T., Kelly, D. J., Lee, J. M., Lutolf, M., McAlpine, M. C., Yeong, W. Y., Zenobi-Wong, M., & Malda, J. (2021) · Nature Reviews Methods Primers · doi:10.1038/s43586-021-00073-8 · Cited by 391
Kanishka, K., & Acherjee, B. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.10.024 · Cited by 343
Bom, S., Ribeiro, R., Ribeiro, H. M., Santos, C., & Marto, J. (2022) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2022.121506 · Cited by 230
Portable hand-held bioprinters promote in situ tissue regeneration
Pazhouhnia, Z., Beheshtizadeh, N., Namini, M. S., & Lotfibakhshaiesh, N. (2022) · Bioengineering & Translational Medicine · doi:10.1002/btm2.10307 · Cited by 60
Drug screening at single-organoid resolution via bioprinting and interferometry
Tebon, P. J., Wang, B., Markowitz, A. L., Davarifar, A., Krawczuk, P., Murray, G., Nguyen, H. T. L., Tavanaie, N., Nguyen, T. L., Boutros, P. C., et al. (2021) · doi:10.1101/2021.10.03.462896 · Cited by 155
Metadata
- Authors
- Boularaoui, S., Al Hussein, G., Khan, K. A., Christoforou, N., & Stefanini, C.
- Venue
- Bioprinting
- Publisher
- Elsevier BV
- Published
- 2020-12
- Volume
- 20
- Pages
- e00093
- ISSN
- 2405-8866 (ISSN-L)
- OpenAlex
- W3049691363
- Cited by
- 320
- References
- 191
- FWCI
- 7.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.