The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Mapping the Cu-BTC metal–organic framework (HKUST-1) stability envelope in the presence of water vapour for CO2 adsorption from flue gases
Open accessAbstract
Abstract Cu-BTC metal–organic framework (HKUST-1) was evaluated as the model material for CO2 capture from flue gas streams. This paper presents an optimised hydrothermal synthesis of HKUST-1 and an analysis of water stability of HKUST-1. Substantial improvements of the hydrothermal synthesis process of HKUST-1 are shown to increase the quantitative yield up to 89.4% at 100 °C. Single-component adsorption experiments were carried out under conditions relevant for flue gases adsorption (45–60 °C, 0–1 barG) to evaluate the performance of HKUST-1 in terms of adsorption capacity, showing that the amount adsorbed of water can reach up to 21.7 mmol g−1, about one order of magnitude higher than CO2 (1.75 mmol g−1) and almost two orders of magnitude higher than N2 (0.17 mmol g−1). The hydration process of HKUST-1 framework was investigated using dynamic vapour adsorption under the flue gas emitting conditions. HKUST-1 is sensitive to humid streams and dynamic deformation of its porous structure takes place at 40–50 °C and various relative humidity values, leading to the irreversible decomposition of HKUST-1 framework and the consequent deterioration in its adsorption capacity. Under humid conditions, water displaces the organic linkers from the copper centres causing the collapse of HKUST-1 framework. These results provide fundamental knowledge to enable future material design for the modification of the hydrophilic nature of copper sites in HKUST-1 to improve its moisture stability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Chemically Functionalizable Nanoporous Material [Cu 3 (TMA) 2 (H 2 O) 3 ] n
Chui, S. S.-Y., Lo, S. M.-F., Charmant, J. P. H., Orpen, A. G., & Williams, I. D. (1999) · Science · doi:10.1126/science.283.5405.1148 · Cited by 6,063
Flexible metal–organic frameworks
Schneemann, A., Bon, V., Schwedler, I., Senkovska, I., Kaskel, S., & Fischer, R. A. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00101j · Cited by 2,211
Separation of CO2 from Flue Gas: A Review
Aaron, D., & Tsouris, C. (2005) · Separation Science and Technology · doi:10.1081/ss-200042244 · Cited by 1,525
Progress in adsorption-based CO2capture by metal–organic frameworks
Liu, J., Thallapally, P. K., McGrail, B. P., Brown, D. R., & Liu, J. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15221a · Cited by 1,339
Schlichte, K., Kratzke, T., & Kaskel, S. (2004) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2003.12.027 · Cited by 1,112
Characterization of metal-organic frameworks by water adsorption
Küsgens, P., Rose, M., Senkovska, I., Fröde, H., Henschel, A., Siegle, S., & Kaskel, S. (2009) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.11.020 · Cited by 1,093
Metallo-organic molecular sieve for gas separation and purification
Min Wang, Q., Shen, D., Bülow, M., Ling Lau, M., Deng, S., Fitch, F. R., Lemcoff, N. O., & Semanscin, J. (2002) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(02)00405-5 · Cited by 771
Synthesis of metal-organic frameworks: A mini review
Lee, Y.-R., Kim, J., & Ahn, W.-S. (2013) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-013-0140-6 · Cited by 705
Alaerts, L., Séguin, E., Poelman, H., Thibault‐Starzyk, F., Jacobs, P. A., & De Vos, D. E. (2006) · Chemistry – A European Journal · doi:10.1002/chem.200600220 · Cited by 694
Zhang, W., Hu, Y., Ge, J., Jiang, H.-L., & Yu, S.-H. (2014) · Journal of the American Chemical Society · doi:10.1021/ja509960n · Cited by 588
Adsorption calculations and modeling
Tien, C. (1994) · Cited by 584
Reducing the Cost of CO 2 Capture from Flue Gases Using Pressure Swing Adsorption
Ho, M. T., Allinson, G. W., & Wiley, D. E. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie070831e · Cited by 566 · cited 3×
“capacity are coupled with increases in the CO2/N2 selectivity [5] and thermal and moisture stability.”
BackgroundInfluentialEffect of Water Adsorption on Retention of Structure and Surface Area of Metal–Organic Frameworks
Schoenecker, P. M., Carson, C. G., Jasuja, H., Flemming, C. J. J., & Walton, K. S. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie202325p · Cited by 557
Solid-state reactivity and structural transformations involving coordination polymers
Kole, G. K., & Vittal, J. J. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35234f · Cited by 532
Synthesis and characterization of porous HKUST-1 metal organic frameworks for hydrogen storage
Lin, K.-S., Adhikari, A. K., Ku, C.-N., Chiang, C.-L., & Kuo, H. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.04.105 · Cited by 507
Li, Z.-Q., Qiu, L.-G., Xu, T., Wu, Y., Wang, W., Wu, Z.-Y., & Jiang, X. (2009) · Materials Letters · doi:10.1016/j.matlet.2008.09.010 · Cited by 448
Comparative Study of CO2 Capture by Carbon Nanotubes, Activated Carbons, and Zeolites
Lu, C., Bai, H., Wu, B., Su, F., & Hwang, J. F. (2008) · Energy & Fuels · doi:10.1021/ef8000086 · Cited by 422
Carbon capture in metal–organic frameworks—a comparative study
Simmons, J. M., Wu, H., Zhou, W., & Yildirim, T. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00700e · Cited by 402
Seo, Y.-K., Hundal, G., Jang, I. T., Hwang, Y. K., Jun, C.-H., & Chang, J.-S. (2009) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.10.035 · Cited by 373
Adsorptive Separation of Isobutene and Isobutane on Cu3(BTC)2
Hartmann, M., Kunz, S., Himsl, D., Tangermann, O., Ernst, S., & Wagener, A. (2008) · Langmuir · doi:10.1021/la8008656 · Cited by 357
Advances in principal factors influencing carbon dioxide adsorption on zeolites
Bonenfant, D., Kharoune, M., Niquette, P., Mimeault, M., & Hausler, R. (2008) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/9/1/013007 · Cited by 351
Biemmi, E., Christian, S., Stock, N., & Bein, T. (2009) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.06.040 · Cited by 349
Schlesinger, M., Schulze, S., Hietschold, M., & Mehring, M. (2010) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2010.02.008 · Cited by 305
Negative Thermal Expansion in the Metal–Organic Framework Material Cu3(1,3,5‐benzenetricarboxylate)2
Wu, Y., Kobayashi, A., Halder, G. J., Peterson, V. K., Chapman, K. W., Lock, N., Southon, P. D., & Kepert, C. J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200803925 · Cited by 304
Water adsorption characteristics of novel materials for heat transformation applications
Henninger, S. K., Schmidt, F. P., & Henning, H.-M. (2010) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2010.03.028 · Cited by 298
Liu, J., Culp, J. T., Natesakhawat, S., Bockrath, B. C., Zande, B., Sankar, S. G., Garberoglio, G., & Johnson, J. K. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp071449i · Cited by 285
Zhao, Z., Wang, S., Yang, Y., Li, X., Li, J., & Li, Z. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.08.012 · Cited by 278
Molecular simulation of separation of CO2 from flue gases in CU‐BTC metal‐organic framework
Yang, Q., Xue, C., Zhong, C., & Chen, J. (2007) · AIChE Journal · doi:10.1002/aic.11298 · Cited by 259
Senthil Kumar, R., Senthil Kumar, S., & Anbu Kulandainathan, M. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2012.09.028 · Cited by 251
Soubeyrand-Lenoir, E., Vagner, C., Yoon, J. W., Bazin, P., Ragon, F., Hwang, Y. K., Serre, C., Chang, J.-S., & Llewellyn, P. L. (2012) · Journal of the American Chemical Society · doi:10.1021/ja302787x · Cited by 234
Carbon dioxide capturing technologies: a review focusing on metal organic framework materials (MOFs)
Sabouni, R., Kazemian, H., & Rohani, S. (2014) · Environmental Science and Pollution Research · doi:10.1007/s11356-013-2406-2 · Cited by 216
Torrente-Murciano, L., Gilbank, A., Puertolas, B., Garcia, T., Solsona, B., & Chadwick, D. (2013) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2012.10.030 · Cited by 207
Self-citationMolecular simulation study of hydrophilic and hydrophobic behavior of activated carbon surfaces
Müller, E. A., & Gubbins, K. E. (1998) · Carbon · doi:10.1016/s0008-6223(98)00135-3 · Cited by 200
Gul‐E‐Noor, F., Jee, B., Pöppl, A., et al. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c0cp02848g · Cited by 170
Extremely enhanced CO2 uptake by HKUST-1 metal–organic framework via a simple chemical treatment
Yan, X., Komarneni, S., Zhang, Z., & Yan, Z. (2014) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.09.009 · Cited by 162
Porous materials for carbon dioxide capture
Lu, A., & Hao, G. (2013) · Annual Reports Section A (Inorganic Chemistry) · doi:10.1039/c3ic90003g · Cited by 118
Amino substituted Cu3(btc)2: a new metal–organic framework with a versatile functionality
Peikert, K., Hoffmann, F., & Fröba, M. (2012) · Chemical Communications · doi:10.1039/c2cc36220a · Cited by 70
Cited by
Galizia, M., Chi, W. S., Smith, Z. P., Merkel, T. C., Baker, R. W., & Freeman, B. D. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b01718 · Cited by 989
Water and Metal–Organic Frameworks: From Interaction toward Utilization
Liu, X., Wang, X., & Kapteijn, F. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00746 · Cited by 614
Belmabkhout, Y., Guillerm, V., & Eddaoudi, M. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.03.124 · Cited by 358
Azad, F. N., Ghaedi, M., Dashtian, K., Hajati, S., & Pezeshkpour, V. (2016) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2016.01.024 · Cited by 319
Wen, J., Fang, Y., & Zeng, G. (2018) · Chemosphere · doi:10.1016/j.chemosphere.2018.03.047 · Cited by 301
Metadata
- Authors
- Al-Janabi, N., Hill, P., Torrente-Murciano, L., Garforth, A., Gorgojo, P., Siperstein, F., & Fan, X.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2015-12
- Volume
- 281
- Pages
- 669-677
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W1795325825
- Cited by
- 386
- References
- 37
- FWCI
- 8.86
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.