The DOI matches its Crossref record; 112 of the 112 references it cites were found in a registry or an index.
Plant-derived hard carbon as anode for sodium-ion batteries: A comprehensive review to guide interdisciplinary research
Open accessAbstract
Sodium-ion batteries (SIBs) are one of the most promising candidates to replace lithium-ion batteries (LIBs) in grid-scale energy storage applications. SIBs technology is still in an early development stage and new feasible and low-cost active materials are required. The design of high-performance anodes and the fully understanding of the sodium storage mechanisms are the main bottleneck to overcome. Hard carbons (HCs) are extensively studied as anode material since sodium ions can be intercalated in pseudographitic domains and reversibly adsorbed in surface edges, defects and nanopores. This review aims at providing a comprehensive overview of the current state of knowledge of plant-derived HC anodes in SIBs, which can be helpful for researchers from different backgrounds working in the field. Working principles of SIBs are summarized, together with a detailed description of the Na-ion storage mechanisms in hard carbon anodes proposed to date. Finally, an exhaustive literature review on the performance of plant-derived HCs in SIBs is presented, with special focus on the synthesis pathways (including activation and/or doping treatments).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Wang, H., Maiyalagan, T., & Wang, X. (2012) · ACS Catalysis · doi:10.1021/cs200652y · Cited by 3,618 · cited 1×
“It shows three common bonding configurations within the carbon lattice, including pyridinic-N, pyrrolic-N, and quaternary-N (or graphitic-N) [140].”
Komaba, S., Murata, W., Ishikawa, T., Yabuuchi, N., Ozeki, T., Nakayama, T., Ogata, A., Gotoh, K., & Fujiwara, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100854 · Cited by 2,116
Funke, A., & Ziegler, F. (2010) · Biofuels Bioproducts and Biorefining · doi:10.1002/bbb.198 · Cited by 2,001 · cited 1×
“HTC process is inspired by the natural coal formation and its five reaction mechanisms are hydrolysis, dehydration, decarboxylation, aromatization, and condensation polymerization [87].”
Sodium Ion Insertion in Hollow Carbon Nanowires for Battery Applications
Cao, Y., Xiao, L., Sushko, M. L., Wang, W., Schwenzer, B., Xiao, J., Nie, Z., Saraf, L. V., Yang, Z., & Liu, J. (2012) · Nano Letters · doi:10.1021/nl3016957 · Cited by 1,929
High Capacity Anode Materials for Rechargeable Sodium-Ion Batteries
Stevens, D. A., & Dahn, J. R. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393348 · Cited by 1,884
Carbon Electrodes for K-Ion Batteries
Jian, Z., Luo, W., & Ji, X. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06809 · Cited by 1,866
Development of biochar-based functional materials: toward a sustainable platform carbon material
Liu, W.-J., Jiang, H., & Yu, H.-Q. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00195 · Cited by 1,754 · cited 1×
“Biochar can also be activated and/or functionalized to be used in a number of potential value-added applications, including electrochemical energy storage [78,79].”
The Mechanisms of Lithium and Sodium Insertion in Carbon Materials
Stevens, D. A., & Dahn, J. R. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1379565 · Cited by 1,499
The hierarchical structure and mechanics of plant materials
Gibson, L. J. (2012) · Journal of The Royal Society Interface · doi:10.1098/rsif.2012.0341 · Cited by 1,215
Crystallite growth in graphitizing and non-graphitizing carbons
Franklin, R. E. (1951) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1951.0197 · Cited by 1,153
Komaba, S., Hasegawa, T., Dahbi, M., & Kubota, K. (2015) · Electrochemistry Communications · doi:10.1016/j.elecom.2015.09.002 · Cited by 1,104
Hollow Carbon Nanospheres with Superior Rate Capability for Sodium‐Based Batteries
Tang, K., Fu, L., White, R. J., Yu, L., Titirici, M., Antonietti, M., & Maier, J. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100691 · Cited by 1,104
Towards K‐Ion and Na‐Ion Batteries as “Beyond Li‐Ion”
Kubota, K., Dahbi, M., Hosaka, T., Kumakura, S., & Komaba, S. (2018) · The Chemical Record · doi:10.1002/tcr.201700057 · Cited by 1,015
New Mechanistic Insights on Na-Ion Storage in Nongraphitizable Carbon
Bommier, C., Surta, T. W., Dolgos, M., & Ji, X. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01969 · Cited by 998
Li, Y., Hu, Y., Titirici, M., Chen, L., & Huang, X. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600659 · Cited by 998
Carbon Nanosheet Frameworks Derived from Peat Moss as High Performance Sodium Ion Battery Anodes
Ding, J., Wang, H., Li, Z., Kohandehghan, A., Cui, K., Xu, Z., Zahiri, B., Tan, X., Lotfabad, E. M., Olsen, B. C., et al. (2013) · ACS Nano · doi:10.1021/nn404640c · Cited by 979
High-Density Sodium and Lithium Ion Battery Anodes from Banana Peels
Lotfabad, E. M., Ding, J., Cui, K., Kohandehghan, A., Kalisvaart, W. P., Hazelton, M., & Mitlin, D. (2014) · ACS Nano · doi:10.1021/nn502045y · Cited by 907
Intercalation chemistry of graphite: alkali metal ions and beyond
Li, Y., Lu, Y., Adelhelm, P., Titirici, M.-M., & Hu, Y.-S. (2019) · Chemical Society Reviews · doi:10.1039/c9cs00162j · Cited by 903
Pyrolysis for Biochar Purposes: A Review to Establish Current Knowledge Gaps and Research Needs
Manyà, J. J. (2012) · Environmental Science & Technology · doi:10.1021/es301029g · Cited by 836
Self-citationFang, S., Bresser, D., & Passerini, S. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902485 · Cited by 823
Practical Handbook of Physical Properties of Rocks and Minerals (1988)
Carmichael, R. S. (2017) · CRC Press eBooks · doi:10.1201/9780203710968 · Cited by 777
Emerging applications of biochar-based materials for energy storage and conversion
Liu, W.-J., Jiang, H., & Yu, H.-Q. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00206e · Cited by 743
Lithium market research – global supply, future demand and price development
Martin, G., Rentsch, L., Höck, M., & Bertau, M. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.11.004 · Cited by 740 · cited 1×
“Almost 60% of global lithium reserves are found in lithium brines deposits located in South America, especially in Chile, Bolivia, and Argentina, while the main ore deposits as spodumene mineral are located in Australia [5].”
Biomass derived hard carbon used as a high performance anode material for sodium ion batteries
Hong, K.-L., Qie, L., Zeng, R., Yi, Z.-Q., Zhang, W., Wang, D., Yin, W., Wu, C., Fan, Q.-J., Zhang, W.-X., et al. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta02068e · Cited by 737
Mechanism of lithium insertion in hard carbons prepared by pyrolysis of epoxy resins
Liu, Y., Xue, J. S., Zheng, T., & Dahn, J. R. (1996) · Carbon · doi:10.1016/0008-6223(96)00177-7 · Cited by 732
Xiao, L., Lu, H., Fang, Y., Sushko, M. L., Cao, Y., Ai, X., Yang, H., & Liu, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703238 · Cited by 726
From Li‐Ion Batteries toward Na‐Ion Chemistries: Challenges and Opportunities
Chayambuka, K., Mulder, G., Danilov, D. L., & Notten, P. H. L. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202001310 · Cited by 694
Reaction mechanisms and multi-scale modelling of lignocellulosic biomass pyrolysis
Anca-Couce, A. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2015.10.002 · Cited by 664
Chen, W., Gong, M., Li, K., Xia, M., Chen, Z., Xiao, H., Fang, Y., Chen, Y., Yang, H., & Chen, H. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115730 · Cited by 651
Li, Y., Lu, Y., Meng, Q., Jensen, A. C. S., Zhang, Q., Zhang, Q., Tong, Y., Qi, Y., Gu, L., Titirici, M., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201902852 · Cited by 643
Li, Y., Lu, Y., Zhao, C., Hu, Y.-S., Titirici, M.-M., Li, H., Huang, X., & Chen, L. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2017.01.002 · Cited by 642
A high performance sulfur-doped disordered carbon anode for sodium ion batteries
Li, W., Zhou, M., Li, H., Wang, K., Cheng, S., & Jiang, K. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01985k · Cited by 641
Review—Hard Carbon Negative Electrode Materials for Sodium-Ion Batteries
Irisarri, E., Ponrouch, A., & Palacin, M. R. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0091514jes · Cited by 629
Thermal decomposition of wood: Influence of wood components and cellulose crystallite size
Poletto, M., Zattera, A. J., Forte, M. M. C., & Santana, R. M. C. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2011.11.122 · Cited by 614
Biomass-derived renewable carbon materials for electrochemical energy storage
Gao, Z., Zhang, Y., Song, N., & Li, X. (2017) · Materials Research Letters · doi:10.1080/21663831.2016.1250834 · Cited by 551
Catalytic pyrolysis of individual components of lignocellulosic biomass
Wang, K., Kim, K. H., & Brown, R. C. (2014) · Green Chem. · doi:10.1039/c3gc41288a · Cited by 512
Update on anode materials for Na-ion batteries
Kang, H., Liu, Y., Cao, K., Zhao, Y., Jiao, L., Wang, Y., & Yuan, H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03181h · Cited by 468
Selenium@Mesoporous Carbon Composite with Superior Lithium and Sodium Storage Capacity
Luo, C., Xu, Y., Zhu, Y., Liu, Y., Zheng, S., Liu, Y., Langrock, A., & Wang, C. (2013) · ACS Nano · doi:10.1021/nn403108w · Cited by 439
Effects of Cellulose, Hemicellulose, and Lignin on the Structure and Morphology of Porous Carbons
Deng, J., Xiong, T., Wang, H., Zheng, A., & Wang, Y. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00388 · Cited by 431
Okoshi, M., Yamada, Y., Komaba, S., Yamada, A., & Nakai, H. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0211702jes · Cited by 391
Mechanism of Sodium Storage in Hard Carbon: An X‐Ray Scattering Analysis
Morikawa, Y., Nishimura, S., Hashimoto, R., Ohnuma, M., & Yamada, A. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903176 · Cited by 387
Conversion reactions for sodium-ion batteries
Klein, F., Jache, B., Bhide, A., & Adelhelm, P. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp52125g · Cited by 370
Synthesis of hard carbon from argan shells for Na-ion batteries
Dahbi, M., Kiso, M., Kubota, K., Horiba, T., Chafik, T., Hida, K., Matsuyama, T., & Komaba, S. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01394a · Cited by 347 · cited 2×
“Dahbi et al. [41] studied the HCl-washing of raw argan shells to remove inorganic species before pyrolysis.”
Facile synthesis of high performance hard carbon anode materials for sodium ion batteries
Sun, N., Liu, H., & Xu, B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta05118e · Cited by 345
Yu, W., Wang, H., Liu, S., Mao, N., Liu, X., Shi, J., Liu, W., Chen, S., & Wang, X. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta01821a · Cited by 298
Simone, V., Boulineau, A., de Geyer, A., Rouchon, D., Simonin, L., & Martinet, S. (2016) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2016.04.016 · Cited by 294
Jiang, L., Sheng, L., & Fan, Z. (2018) · Science China Materials · doi:10.1007/s40843-017-9169-4 · Cited by 283
Surface-Driven Sodium Ion Energy Storage in Nanocellular Carbon Foams
Shao, Y., Xiao, J., Wang, W., Engelhard, M., Chen, X., Nie, Z., Gu, M., Saraf, L. V., Exarhos, G., Zhang, J.-G., et al. (2013) · Nano Letters · doi:10.1021/nl401995a · Cited by 280
Expanded biomass-derived hard carbon with ultra-stable performance in sodium-ion batteries
Zhu, Z., Liang, F., Zhou, Z., Zeng, X., Wang, D., Dong, P., Zhao, J., Sun, S., Zhang, Y., & Li, X. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta07951f · Cited by 278
Biomass derived hierarchical porous carbons as high-performance anodes for sodium-ion batteries
Wang, H., Yu, W., Shi, J., Mao, N., Chen, S., & Liu, W. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2015.12.002 · Cited by 265
High capacity hard carbon derived from lotus stem as anode for sodium ion batteries
Zhang, N., Liu, Q., Chen, W., Wan, M., Li, X., Wang, L., Xue, L., & Zhang, W. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.12.054 · Cited by 265
High capacitive performance of exfoliated biochar nanosheets from biomass waste corn cob
Genovese, M., Jiang, J., Lian, K., & Holm, N. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06110a · Cited by 255
A porous biomass-derived anode for high-performance sodium-ion batteries
Zhu, Y., Chen, M., Li, Q., Yuan, C., & Wang, C. (2017) · Carbon · doi:10.1016/j.carbon.2017.12.103 · Cited by 235
Origin of non-SEI related coulombic efficiency loss in carbons tested against Na and Li
Memarzadeh Lotfabad, E., Kalisvaart, P., Kohandehghan, A., Karpuzov, D., & Mitlin, D. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta04995k · Cited by 226
Recent progress in plant‐derived hard carbon anode materials for sodium‐ion batteries: a review
Yu, P., Tang, W., Wu, F., Zhang, C., Luo, H., Liu, H., & Wang, Z. (2020) · Rare Metals · doi:10.1007/s12598-020-01443-z · Cited by 215
Pinecone biomass-derived hard carbon anodes for high-performance sodium-ion batteries
Zhang, T., Mao, J., Liu, X., Xuan, M., Bi, K., Zhang, X. L., Hu, J., Fan, J., Chen, S., & Shao, G. (2017) · RSC Advances · doi:10.1039/c7ra07231g · Cited by 203
Zhang, Y., Li, X., Dong, P., Wu, G., Xiao, J., Zeng, X., Zhang, Y., & Sun, X. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b13160 · Cited by 200
Liu, M., Zhang, J., Guo, S., Wang, B., Shen, Y., Ai, X., Yang, H., & Qian, J. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c02230 · Cited by 195
Cohesion and structure in stage-1 graphite intercalation compounds
Divincenzo, D. P., & Melé, E. J. (1985) · Physical review. B, Condensed matter · doi:10.1103/physrevb.32.2538 · Cited by 194
Dou, X., Hasa, I., Hekmatfar, M., Diemant, T., Behm, R. J., Buchholz, D., & Passerini, S. (2017) · ChemSusChem · doi:10.1002/cssc.201700628 · Cited by 194
A lamellar compound of sodium and graphite
Asher, R. C. (1959) · Journal of Inorganic and Nuclear Chemistry · doi:10.1016/0022-1902(59)80118-4 · Cited by 187
Qin, D., Liu, Z., Zhao, Y., Xu, G., Zhang, F., & Zhang, X. (2018) · Carbon · doi:10.1016/j.carbon.2018.01.007 · Cited by 174
Preparation and characterization of activated carbons from tobacco stem by chemical activation
Chen, R., Li, L., Liu, Z., Lu, M., Wang, C., Li, H., Ma, W., & Wang, S. (2017) · Journal of the Air & Waste Management Association · doi:10.1080/10962247.2017.1280560 · Cited by 172
Wasalathilake, K. C., Ayoko, G. A., & Yan, C. (2018) · Carbon · doi:10.1016/j.carbon.2018.08.071 · Cited by 164
Li-ion batteries for mobility and stationary storage applications
Tsiropoulos, I., Tarvydas, D., & Natalia, L. (2018) · Joint Research Centre (European Commission) · doi:10.2760/87175 · Cited by 164
Scholz, F., Inzelt, G., & Bard, A. J. (2008) · Springer eBooks · doi:10.1007/978-3-540-74598-3 · Cited by 161
Liu, X., Tan, Y., Liu, T., Wang, W., Li, C., Lu, J., & Sun, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201903795 · Cited by 160
Pei, Z., Meng, Q., Li, W., Fan, J., Chen, Y., & Zhi, C. (2020) · Energy storage materials · doi:10.1016/j.ensm.2020.02.033 · Cited by 159
Kumaresan, T. K., Shanmugharaj, A. M., Raman, K., Karazhanov, S. Z., & Raghu, S. C. (2020) · Electrochimica Acta · doi:10.1016/j.electacta.2020.137574 · Cited by 138
New insights into the origin of unstable sodium graphite intercalation compounds
Lenchuk, O., Adelhelm, P., & Mollenhauer, D. (2019) · Physical Chemistry Chemical Physics · doi:10.1039/c9cp03453f · Cited by 134
Capacitance-enhanced sodium-ion storage in nitrogen-rich hard carbon
Gaddam, R. R., Niaei, A. H. F., Hankel, M., Searles, D. J., Nanjundan, A. K., & Zhao, X. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta06754b · Cited by 132
Pyrolytic characteristics and kinetics of pistachio shell by thermogravimetric analysis
Açıkalın, K. (2011) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-011-1714-3 · Cited by 130
Trash to Treasure: From Harmful Algal Blooms to High-Performance Electrodes for Sodium-Ion Batteries
Meng, X., Savage, P. E., & Deng, D. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b03882 · Cited by 127
Boric Acid Assisted Reduction of Graphene Oxide: A Promising Material for Sodium-Ion Batteries
Wang, Y., Wang, C., Wang, Y., Liu, H., & Huang, Z. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b04774 · Cited by 127
Anish Raj, K., Panda, M. R., Dutta, D. P., & Mitra, S. (2018) · Carbon · doi:10.1016/j.carbon.2018.11.038 · Cited by 127
Pore structure regulation of hard carbon: Towards fast and high‐capacity sodium‐ion storage
Yang, L., Hu, M., Zhang, H., Yang, W. L., & Lv, R. (2020) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2020.01.085 · Cited by 123
Tailored Carbon Anodes Derived from Biomass for Sodium-Ion Storage
Kim, K.-H., Lim, D. G., 韓, 昌., Osswald, S., Ortalan, V., Youngblood, J. P., & Pol, V. G. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01497 · Cited by 122
Biochars from various biomass types as precursors for hard carbon anodes in sodium-ion batteries
Rios, C. D. M. S., Simone, V., Simonin, L., Martinet, S., & Dupont, C. (2018) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2018.07.001 · Cited by 122
Yu, Z.-E., Lyu, Y., Wang, Y., Xu, S., Cheng, H., Mu, X., Chu, J., Chen, R., Liu, Y., & Guo, B. (2019) · Chemical Communications · doi:10.1039/c9cc08221b · Cited by 118
Alvin, S., Yoon, D., Chandra, C., Susanti, R. F., Chang, W., Ryu, C., & Kim, J. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.05.013 · Cited by 116
Two-dimensional materials as anodes for sodium-ion batteries
Chang, Y., Lin, H., Li, L., & Chen, H. (2020) · Materials Today Advances · doi:10.1016/j.mtadv.2020.100054 · Cited by 113
Wang, X., Shi, J., Mi, L., Zhai, Y., Zhang, J., Feng, X., Wu, Z., & Chen, W. (2020) · Rare Metals · doi:10.1007/s12598-020-01469-3 · Cited by 110
Impact of the Acid Treatment on Lignocellulosic Biomass Hard Carbon for Sodium‐Ion Battery Anodes
Dou, X., Hasa, I., Saurel, D., Jáuregui, M., Buchholz, D., Rojo, T., & Passerini, S. (2018) · ChemSusChem · doi:10.1002/cssc.201801148 · Cited by 101
Zhu, J., Yu, S., Wang, T., Sun, H., Zhao, Z., Mei, L., Zheng, F., Xu, Z. Q., Shakir, I., Huang, Y., et al. (2016) · Nature Communications · doi:10.1038/ncomms13432 · Cited by 96
Graphite structure and lithium intercalation
Shi, H., Barker, J., Saïdi, M. Y., Koksbang, R., & Morris, L. (1997) · Journal of Power Sources · doi:10.1016/s0378-7753(96)02562-1 · Cited by 95
Biobased Functional Carbon Materials: Production, Characterization, and Applications—A Review
Correa, C. R., & Kruse, A. (2018) · Materials · doi:10.3390/ma11091568 · Cited by 93 · cited 1×
“For physical activation, steam and CO 2 are typical activation agents, whereas KOH, H 3 PO 4 and ZnCl 2 are the most used compounds for chemical activation purposes [107].”
Recent Progress in Design of Biomass-Derived Hard Carbons for Sodium Ion Batteries
Górka, J., Vix‐Guterl, C., & Ghimbeu, C. M. (2016) · C – Journal of Carbon Research · doi:10.3390/c2040024 · Cited by 90
Qiao, Y., Han, R., Pang, Y., Lu, Z., Zhao, J. W., Cheng, X., Zhang, H., Yang, Z., Yang, S., & Liu, Y. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta02268f · Cited by 89
Wan, H., Shen, X., Jiang, H., Zhang, C., Jiang, K., Chen, T., Shi, L., Dong, L., He, C., Xu, Y., et al. (2021) · Energy · doi:10.1016/j.energy.2021.121102 · Cited by 86
Yang, C., Xiong, J., Ou, X., Wu, C.-F., Xiong, X., Wang, J., Huang, K., & Liu, M. (2018) · Materials Today Energy · doi:10.1016/j.mtener.2018.02.001 · Cited by 82
Nanomanufacturing of graphene nanosheets through nano-hole opening and closing
Chen, Y., Wang, Y., Zhu, S., Fu, K. K., Han, X., Wang, Y., Zhao, B., Tian, L., Liu, B., Li, Y., et al. (2018) · Materials Today · doi:10.1016/j.mattod.2018.09.001 · Cited by 81
Zhao, G., Zou, G., Hou, H., Ge, P., Cao, X., & Ji, X. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta07860a · Cited by 79
Xu, S., Zhao, Y., Liu, S., Ren, X., Chen, L., Shi, W., Wang, X., & Zhang, D. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2472-4 · Cited by 73
Wang, P., Zhu, K., Ye, K., Gong, Z., Liu, R., Cheng, K., Wang, G., Yan, J., & Cao, D. (2019) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2019.11.091 · Cited by 73
Li, W., Huang, J., Feng, L., Cao, L., Ren, Y., Li, R., Xu, Z., Li, J., & Yao, C. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.05.062 · Cited by 67
A high-energy-density sodium-ion full battery based on tin anode
Song, M., Wang, C., Du, D., Li, F., & Chen, J. (2019) · Science China Chemistry · doi:10.1007/s11426-018-9422-y · Cited by 65
Waste Beverage Coffee-Induced Hard Carbon Granules for Sodium-Ion Batteries
Lee, M. E., Kwak, H. W., Jin, H., & Yun, Y. S. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b00971 · Cited by 65
Rios, C. D. M. S., Simonin, L., Geyer, A. D., Ghimbeu, C. M., & Dupont, C. (2020) · Energies · doi:10.3390/en13143513 · Cited by 61
Biowaste Lignin-Based Carbonaceous Materials as Anodes for Na-Ion Batteries
Marino, C., Cabañero, J. M., Povia, M., & Villevieille, C. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0681807jes · Cited by 60
Recent Advances in Biomass-Derived Carbon Materials for Sodium-Ion Energy Storage Devices
Yan, M., Qin, Y., Wang, L., Song, M., Han, D., Jin, Q., Zhao, S., Zhao, M., Li, Z., Wang, X., et al. (2022) · Nanomaterials · doi:10.3390/nano12060930 · Cited by 60
Cano, L. A. R., García‐Rosero, H., Carrasco-Marı́n, F., Pérez-Cadenas, A. F., González‐Gutiérrez, L. V., Zárate‐Guzmán, A. I., & Ramos‐Sánchez, G. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2019.134973 · Cited by 59
Effects of pore size and surface charge on Na ion storage in carbon nanopores
Karatrantos, A., & Cai, Q. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp04611h · Cited by 51
Hard carbon for sodium batteries: Wood precursors and activation with first group hydroxide
Pozio, A., Aurora, A., & Prosini, P. P. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.227555 · Cited by 50
Rubio, S., Maça, R. R., Aragón, M. J., Cabello, M., Castillo‐Rodríguez, M., Lavela, P., Tirado, J. L., Etacheri, V., & Ortiz, G. F. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.05.070 · Cited by 48
Fu, H., Xu, Z., Li, R., Guan, W., Yao, K., Huang, J., Yang, J. X., & Shen, X. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b03297 · Cited by 39
Li, R., Huang, J., Xu, Z., Qi, H., Cao, L., Liu, Y., Li, W., & Li, J. (2017) · Energy Technology · doi:10.1002/ente.201700674 · Cited by 32
Xu, Z., Chen, J., Wu, M., Chen, C., Song, Y., & Wang, Y. (2019) · Electronic Materials Letters · doi:10.1007/s13391-019-00143-w · Cited by 31
Zhang, Y., Chen, L., Meng, Y., Li, X., Guo, Y. C., & Xiao, D. (2016) · RSC Advances · doi:10.1039/c6ra24386j · Cited by 24
Chitosan derived N-doped carbon coated SnO2 nanocomposite anodes for Na-ion batteries
Aydin, M., Demir, E., Ünal, B., Dursun, B., Ahsen, A. Ş., & Demir‐Cakan, R. (2019) · Solid State Ionics · doi:10.1016/j.ssi.2019.115035 · Cited by 20
Li, D., Zhu, Y., Xu, E., Wang, H., Chen, T., Quan, J., Zhang, Y., Wang, L., & Jiang, Y. (2019) · New Journal of Chemistry · doi:10.1039/c9nj01397k · Cited by 11
Ikram, S., Dsoke, S., Sarapulova, A., Müller, M., Rana, U. A., & Siddiqi, H. M. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab9a01 · Cited by 9
Metadata
- Authors
- Alvira, D., Antorán, D., & Manyà, J. J.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2022-11
- Volume
- 447
- Pages
- 137468
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W4282588270
- Cited by
- 309
- References
- 112
- FWCI
- 16.33
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.