The DOI matches its Crossref record; 134 of the 134 references it cites were found in a registry or an index.
Fiber-reinforced geopolymer composites: A review
Open accessAbstract
Abstract There is a burgeoning interest in the development of geopolymers as sustainable construction materials and incombustible inorganic polymers. However, geopolymers show quasi-brittle behavior. To overcome this weakness, hundreds of research have been focused on development, characterization, and implementation of fiber-reinforced geopolymers for a wide range of applications. This paper discusses the rapidly developing state-of-the-art of fiber-reinforced geopolymer composites, focusing on material and geometrical properties of construction fibers, and underlying mechanisms on fiber-binder interaction at fresh and hardened states, mechanical properties, toughening mechanisms, thermal characteristics, and environmental durability. It is intended to build a strong conceptual and technical background for what is currently understood on fiber-reinforced geopolymers by tying the subject together with knowns for other similar cementitious composites rather than a historical report of literature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene
Lee, C., Wei, X., Kysar, J. W., & Hone, J. (2008) · Science · doi:10.1126/science.1157996 · Cited by 20,847
IOP Conference Series: Materials Science and Engineering
(2022) · IOP Conference Series: Materials Science and Engineering · doi:10.1088/1757-899x/1231/1/011001 · Cited by 10,357
Scrivener, K. L., John, V. M., & Gartner, E. M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.03.015 · Cited by 3,620
Georgakilas, V., Perman, J. A., Tucek, J., & Zboril, R. (2015) · Chemical Reviews · doi:10.1021/cr500304f · Cited by 2,147
A review on the degradability of polymeric composites based on natural fibres
Azwa, Z. N., Yousif, B. F., Manalo, A. C., & Karunasena, W. (2013) · Materials & Design · doi:10.1016/j.matdes.2012.11.025 · Cited by 1,530
C ARBON D IOXIDE E MISSIONS FROM THE G LOBAL C EMENT I NDUSTRY
Worrell, E., Price, L., Martin, N., Hendriks, C., & Meida, L. O. (2001) · Annual Review of Energy and the Environment · doi:10.1146/annurev.energy.26.1.303 · Cited by 1,488
Flax fibre and its composites – A review
Yan, L., Chouw, N., & Jayaraman, K. (2014) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2013.08.014 · Cited by 1,454
Fibre Reinforced Cementitious Composites
Bentur, A., & Mindess, S. (2006) · CRC Press eBooks · doi:10.1201/9781482267747 · Cited by 1,440
A review of heat treatment on polyacrylonitrile fiber
Rahaman, M. S. A., Ismail, A. F., & Mustafa, A. (2007) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.03.023 · Cited by 1,412
Use of recycled plastic in concrete: A review
Siddique, R., Khatib, J., & Kaur, I. (2008) · Waste Management · doi:10.1016/j.wasman.2007.09.011 · Cited by 1,108
A short review on basalt fiber reinforced polymer composites
Dhand, V., Mittal, G., Rhee, K. Y., Park, S.-J., & Hui, D. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2014.12.011 · Cited by 1,080
Embodied energy and carbon in construction materials
Hammond, G. P., & Jones, C. I. (2008) · Proceedings of the Institution of Civil Engineers - Energy · doi:10.1680/ener.2008.161.2.87 · Cited by 994
The mechanical properties of fly ash-based geopolymer concrete with alkaline activators
Ryu, G. S., Lee, Y. B., Koh, K. T., & Chung, Y. S. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.05.069 · Cited by 927
Review Carbon fibers for composites
Chand, S. (2000) · Journal of Materials Science · doi:10.1023/a:1004780301489 · Cited by 916
Microstructure development of alkali-activated fly ash cement: a descriptive model
Fernández-Jiménez, A., Palomo, A., & Criado, M. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.08.021 · Cited by 875
Observed Stress‐Strain Behavior of Confined Concrete
Mander, J. B., Priestley, M. J. N., & Park, R. (1988) · Journal of Structural Engineering · doi:10.1061/(asce)0733-9445(1988)114:8(1827 · Cited by 874
Chawla, K. K. (2006) · Materials Science and Technology · doi:10.1002/9783527603978.mst0150 · Cited by 825
DEVELOPMENT AND PROPERTIES OF LOW-CALCIUM FLY ASH-BASED GEOPOLYMER CONCRETE
Hardjito, D., & Rangan, B. V. (2005) · eSpace (Curtin University) · Cited by 822
Fiber-reinforced concrete: an overview after 30 years of development
Zollo, R. F. (1997) · Cement and Concrete Composites · doi:10.1016/s0958-9465(96)00046-7 · Cited by 802
(2002) · ACI Materials Journal · doi:10.14359/12325 · Cited by 761
Cellulosic fiber reinforced cement-based composites: A review of recent research
Ardanuy, M., Claramunt, J., & Toledo Filho, R. D. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.01.035 · Cited by 746
Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material
Panda, B., Paul, S. C., & Tan, M. J. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.07.123 · Cited by 742
Influence of polypropylene fiber geometry on plastic shrinkage cracking in concrete
Banthia, N., & Gupta, R. (2006) · Cement and Concrete Research · doi:10.1016/j.cemconres.2006.01.010 · Cited by 700
Yan, L., Kasal, B., & Huang, L. (2016) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.02.002 · Cited by 635
Properties of fly ash geopolymer concrete designed by Taguchi method
Olivia, M., & Nikraz, H. (2012) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2011.10.036 · Cited by 615
Mechanical properties of hybrid fiber-reinforced concrete at low fiber volume fraction
Yao, W., Li, J., & Wu, K. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)00913-4 · Cited by 578
Ismail, I., Bernal, S. A., Provis, J. L., San Nicolas, R., Brice, D. G., Kilcullen, A. R., Hamdan, S., & van Deventer, J. S. J. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.07.106 · Cited by 544
Metal Matrix Composites: Custom‐made Materials for Automotive and Aerospace Engineering
(2006) · Wiley eBooks · doi:10.1002/3527608117 · Cited by 529
Effect of fiber diameter on tensile properties of electrospun poly(ɛ-caprolactone)
Wong, S.-C., Baji, A., & Leng, S. (2008) · Polymer · doi:10.1016/j.polymer.2008.08.022 · Cited by 528
Fang, G., Ho, W. K., Tu, W., & Zhang, M. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.04.008 · Cited by 528
Self-citationEngineering properties of inorganic polymer concretes (IPCs)
Sofi, M., van Deventer, J. S. J., Mendis, P. A., & Lukey, G. C. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2006.10.008 · Cited by 522
Loftus, E. F. (1997) · Scientific American · doi:10.1038/scientificamerican0997-70 · Cited by 521
Panda, B., & Tan, M. J. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.03.031 · Cited by 520
Fracture toughness of geopolymeric concretes reinforced with basalt fibers
Dias, D. P., & Thaumaturgo, C. (2005) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2004.02.044 · Cited by 492
Engineering Properties of Alkali-Activated Fly Ash Concrete
(2006) · ACI Materials Journal · doi:10.14359/15261 · Cited by 476
Shrinkage characteristics of alkali-activated fly ash/slag paste and mortar at early ages
Lee, N. K., Jang, J. G., & Lee, H. K. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.07.007 · Cited by 462
Engineered Steel Fibers with Optimal Properties for Reinforcement of Cement Composites
Naaman, A. E. (2003) · Journal of Advanced Concrete Technology · doi:10.3151/jact.1.241 · Cited by 440
Development of recycled PET fiber and its application as concrete-reinforcing fiber
Tsuneo, O. C. H. I., OKUBO, S., & FUKUI, K. (2007) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2007.02.002 · Cited by 431
Workability and mechanical properties of alkali activated slag concrete
Collins, F. G., & Sanjayan, J. G. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00236-1 · Cited by 400
Mechanisms of interfacial bond in steel and polypropylene fiber reinforced geopolymer composites
Ranjbar, N., Talebian, S., Mehrali, M., Kuenzel, C., Metselaar, H. S. C., & Jumaat, M. Z. (2015) · Composites Science and Technology · doi:10.1016/j.compscitech.2015.11.009 · Cited by 390
Self-citationAn experimental study on the tensile strength of steel fiber reinforced concrete
Olivito, R. S., & Zuccarello, F. A. (2010) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2009.12.003 · Cited by 385
Mechanical Properties of Fly-Ash-Based Geopolymer Concrete
(2011) · ACI Materials Journal · doi:10.14359/51682495 · Cited by 377
Mechanical and durable behaviour of alkaline cement mortars reinforced with polypropylene fibres
Puertas, F., Amat, T., Fernández‐Jiménez, A., et al. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00222-9 · Cited by 376
Graphene fiber: a new trend in carbon fibers
Xu, Z., & Gao, C. (2015) · Materials Today · doi:10.1016/j.mattod.2015.06.009 · Cited by 375
Influence of aggregate content on the behavior of fly ash based geopolymer concrete
Joseph, B., & Mathew, G. (2012) · Scientia Iranica · doi:10.1016/j.scient.2012.07.006 · Cited by 374
Pore solution composition and alkali diffusion in inorganic polymer cement
Lloyd, R. R., Provis, J. L., & van Deventer, J. S. J. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.04.008 · Cited by 355
Tensile behavior contrast of basalt and glass fibers after chemical treatment
Wei, B., Cao, H., & Song, S. (2010) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2010.04.009 · Cited by 354
Fracture properties of geopolymer paste and concrete
Pan, Z., Sanjayan, J. G., & Rangan, B. V. (2011) · Magazine of Concrete Research · doi:10.1680/macr.2011.63.10.763 · Cited by 352
Fire-resistant Aluminosilicate Composites
Lyon, R. E., Balaguru, P., Foden, A. J., Sorathia, U., Davidovits, J., & Davidovics, M. (1997) · Fire and Materials · doi:10.1002/(sici)1099-1018(199703)21:2<67::aid-fam596>3.0.co;2-n · Cited by 343
Graphene nanoplatelet-fly ash based geopolymer composites
Ranjbar, N., Mehrali, M., Mehrali, M., Alengaram, U. J., & Jumaat, M. Z. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.06.003 · Cited by 341
Self-citationCrack growth resistance of hybrid fiber reinforced cement composites
Banthia, N., & Nandakumar, N. (2003) · Cement and Concrete Composites · doi:10.1016/s0958-9465(01)00043-9 · Cited by 327
Nematollahi, B., Vijay, P., Sanjayan, J., Nazari, A., Xia, M., Nerella, V. N., & Mechtcherine, V. (2018) · Materials · doi:10.3390/ma11122352 · Cited by 326
Ranjbar, N., Mehrali, M., Alengaram, U. J., Metselaar, H. S. C., & Jumaat, M. Z. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.04.064 · Cited by 321
Self-citationRheology of fiber reinforced cementitious materials: classification and prediction
Martinie, L., Rossi, P., & Roussel, N. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.08.032 · Cited by 312
Synthetic fibre-reinforced concrete
Zheng, Z. (1995) · Progress in Polymer Science · doi:10.1016/0079-6700(94)00030-6 · Cited by 311
The pore structure and permeability of alkali activated fly ash
Ma, Y., Hu, J., & Ye, G. (2013) · Fuel · doi:10.1016/j.fuel.2012.05.034 · Cited by 308
Bond strength between blended slag and Class F fly ash geopolymer concrete with steel reinforcement
Castel, A., & Foster, S. J. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.02.016 · Cited by 304
Chindaprasirt, P., & Chalee, W. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.04.010 · Cited by 301
AL-MASHHADANI, M. M. M., Canpolat, O., Aygörmez, Y., Uysal, M., & Erdem, S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.02.061 · Cited by 295
Alomayri, T. S., Assaedi, H. S., Shaikh, F. U. A., & Low, I. M. (2014) · Journal of Asian Ceramic Societies · doi:10.1016/j.jascer.2014.05.005 · Cited by 291
Ambient Temperature Drying Shrinkage and Cracking in Metakaolin‐Based Geopolymers
Kuenzel, C., Vandeperre, L. J., Donatello, S., Boccaccini, A. R., & Cheeseman, C. (2012) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2012.05380.x · Cited by 291
Ling, Y., Wang, K., Li, W., Shi, G., & Lü, P. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.01.092 · Cited by 282
The effect of fiber properties on high performance alkali-activated slag/silica fume mortars
Aydın, S., & Baradan, B. (2012) · Composites Part B Engineering · doi:10.1016/j.compositesb.2012.09.080 · Cited by 275
Influence of thermal treatment on tensile failure of basalt fibers
Militký, J., Kovačič, V., & Rubnerová, J. (2002) · Engineering Fracture Mechanics · doi:10.1016/s0013-7944(01)00119-9 · Cited by 274
Kim, J.-K., Kim, J.-S., Ha, G. J., & Kim, Y. Y. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.04.006 · Cited by 270
Comparison of long term performance between alkali activated slag and fly ash geopolymer concretes
Wardhono, A., Gunasekara, C., Law, D. W., & Setunge, S. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.03.153 · Cited by 270
Multifunctional properties of carbon nanotube/fly ash geopolymeric nanocomposites
Saafi, M., Andrew, K., Tang, P. L., McGhon, D., Taylor, S., Rahman, M., Yang, S., & Zhou, X. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.08.007 · Cited by 268
Wang, X. H., Jacobsen, S., He, J., Zhang, Z. L., Lee, S. F., & Lein, H. L. (2009) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.05.002 · Cited by 267
Characterisation of cotton fibre-reinforced geopolymer composites
Alomayri, T. S., Shaikh, F. U. A., & Low, I. M. (2013) · Composites Part B Engineering · doi:10.1016/j.compositesb.2013.01.013 · Cited by 259
Impact properties of geopolymer based extrudates incorporated with fly ash and PVA short fiber
Zhang, Y., Wei, S., Li, Z., Zhou, X., Eddie, & Chau, C. K. (2006) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2006.08.006 · Cited by 247
Flexural behavior of geopolymer composites reinforced with steel and polypropylene macro fibers
Bhutta, A., Borges, P. H. R., Zanotti, C., Farooq, M., & Banthia, N. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.11.014 · Cited by 245
Chloride ingress and steel corrosion in geopolymer concrete based on long term tests
Tennakoon, C., Shayan, A., Sanjayan, J. G., & Xu, A. (2017) · Materials & Design · doi:10.1016/j.matdes.2016.12.030 · Cited by 240
An integrated design method of Engineered Geopolymer Composite
Ohno, M., & Li, V. C. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.02.001 · Cited by 240
Mechanical properties and mechanisms of fiber reinforced fly ash–steel slag based geopolymer mortar
Guo, X., & Pan, X. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.05.198 · Cited by 239
Chemical shrinkage and autogenous shrinkage of hydrating cement paste
Tazawa, E.-I., Miyazawa, S., & Kasai, T. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00011-9 · Cited by 237
Geopolymer and Portland cement concretes in simulated fire
Zhao, R., & Sanjayan, J. G. (2011) · Magazine of Concrete Research · doi:10.1680/macr.9.00110 · Cited by 235
Cracking behavior of concrete with shrinkage reducing admixtures and PVA fibers
Passuello, A., Moriconi, G., & Shah, S. P. (2009) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.08.004 · Cited by 229
Placet, V. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.04.031 · Cited by 221
Sufian Badar, M., Kupwade-Patil, K., Bernal, S. A., Provis, J. L., & Allouche, E. N. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.03.015 · Cited by 206
Reinforced geopolymer composites for enhanced material greenness and durability
Sakulich, A. R. (2011) · Sustainable Cities and Society · doi:10.1016/j.scs.2011.07.009 · Cited by 202
Performance of fibre reinforced, low density metakaolin geopolymers under simulated fire conditions
Rickard, W. D. A., Vickers, L., & van Riessen, A. (2013) · Applied Clay Science · doi:10.1016/j.clay.2012.10.006 · Cited by 201
Matrix design of strain hardening fiber reinforced engineered geopolymer composite
Nematollahi, B., Sanjayan, J., & Shaikh, F. U. A. (2015) · Composites Part B Engineering · doi:10.1016/j.compositesb.2015.11.039 · Cited by 199
Masi, G., Rickard, W. D. A., Bignozzi, M. C., & van Riessen, A. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.02.023 · Cited by 194
Carbon nanotube dispersion in nematic liquid crystals: An overview
Yadav, S. P., & Singh, S. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.12.002 · Cited by 193
Surface treated polypropylene (PP) fibres for reinforced concrete
López-Buendía, Á. M., Romero-Sánchez, M. D., Climent, V., et al. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.08.004 · Cited by 189
Carbon Fibers: Formation, Structure, and Properties
Peebles, L. H. (2017) · Medical Entomology and Zoology · Cited by 188
Nematollahi, B., Sanjayan, J., Qiu, J., & Yang, E.-H. (2017) · Archives of Civil and Mechanical Engineering · doi:10.1016/j.acme.2016.12.005 · Cited by 187
Flexural performance and toughness of hybrid steel and polypropylene fibre reinforced geopolymer
Sukontasukkul, P., Pongsopha, P., Chindaprasirt, P., & Songpiriyakij, S. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.11.122 · Cited by 179
High tensile strength fly ash based geopolymer composite using copper coated micro steel fiber
Ranjbar, N., Mehrali, M., Mehrali, M., Alengaram, U. J., & Jumaat, M. Z. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.228 · Cited by 174
Self-citationSynthesis and mechanical properties of cotton fabric reinforced geopolymer composites
Alomayri, T. S., Shaikh, F. U. A., & Low, I. M. (2014) · Composites Part B Engineering · doi:10.1016/j.compositesb.2013.12.036 · Cited by 174
Concrete Reinforced with Deformed Steel Fibers, Part I: Bond-Slip Mechanisms
(1994) · ACI Materials Journal · doi:10.14359/4059 · Cited by 171
Islam, A., Alengaram, U. J., Jumaat, M. Z., Bashar, I. I., & Kabir, S. M. A. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.026 · Cited by 170
Assessing behaviour of fresh and hardened geopolymer concrete mixed with class-F fly ash
Albitar, M., Visintin, P., Mohamed Ali, M. S., & Drechsler, M. (2015) · KSCE Journal of Civil Engineering · doi:10.1007/s12205-014-1254-z · Cited by 169
Neupane, K. (2016) · Mechanics of Materials · doi:10.1016/j.mechmat.2016.09.012 · Cited by 165
Alomayri, T. S., & Low, I. M. (2013) · Journal of Asian Ceramic Societies · doi:10.1016/j.jascer.2013.01.002 · Cited by 162
Handbook of properties of textile and technical fibres
(2018) · Cited by 160
Utilization of sweet sorghum fiber to reinforce fly ash-based geopolymer
Chen, R., Ahmari, S., & Zhang, L. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7950-0 · Cited by 155
Rheology of fiber-reinforced cementitious materials
Kuder, K. G., Özyurt, N., Mu, E. B., et al. (2006) · Cement and Concrete Research · doi:10.1016/j.cemconres.2006.10.015 · Cited by 138
Al-Majidi, M. H., Lampropoulos, A. P., & Cundy, A. B. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.02.045 · Cited by 136
Graphene/fly ash geopolymeric composites as self-sensing structural materials
Saafi, M., Tang, L. P., Fung, J., Rahman, M., Sillars, F. B., Liggat, J. J., & Zhou, X. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/6/065006 · Cited by 131
Blending Electronics with the Human Body: A Pathway toward a Cybernetic Future
Mehrali, M., Bagherifard, S., Akbari, M., Thakur, A., Mirani, B., Mehrali, M., Hasany, M., Orive, G., Das, P., Emnéus, J., et al. (2018) · Advanced Science · doi:10.1002/advs.201700931 · Cited by 131
Studies on fly ash-based geopolymer concrete
Rangan, B. V. (2008) · eSpace (Curtin University) · Cited by 130
Monticelli, C., Natali, M. E., Balbo, A., Chiavari, C., Zanotto, F., Manzi, S., & Bignozzi, M. C. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.11.001 · Cited by 125
Park, J., Kim, P.-G., Jang, J.-H., et al. (2008) · Composites Part B Engineering · doi:10.1016/j.compositesb.2007.11.004 · Cited by 117
Alzeer, M. I. M., & MacKenzie, K. J. D. (2013) · Applied Clay Science · doi:10.1016/j.clay.2013.03.010 · Cited by 116
Cheng, H., Shiue, R.-J., Tsai, C.-C., Wang, W., & Chen, Y. (2011) · ACS Nano · doi:10.1021/nn103221v · Cited by 115
Compressive strength of concrete with polypropylene fibre additions
Richardson, A. E. (2006) · International Journal of Building Pathology and Adaptation · doi:10.1108/02630800610666673 · Cited by 113
Tittarelli, F., Mobili, A., Giosué, C., Belli, A., & Bellezze, T. (2018) · Corrosion Science · doi:10.1016/j.corsci.2018.02.014 · Cited by 112
Strain sensing of carbon fiber reinforced geopolymer concrete
Vaidya, S., & Allouche, E. N. (2011) · Materials and Structures · doi:10.1617/s11527-011-9711-3 · Cited by 111
Nguyen, H., Carvelli, V., Adesanya, E., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.03.024 · Cited by 109
Mechanical properties of alkali activated blast furnace slag pastes reinforced with carbon fibers
Vilaplana, J., BAEZA, F. J., Galao, Ó., Alcocel, E. G., Zornoza, E., & Garcés, P. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.04.066 · Cited by 102
Farhan, N. A., Sheikh, M. N., & Hadi, M. N. S. (2018) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0002333 · Cited by 102
Farooq, M., Bhutta, A., & Banthia, N. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.05.004 · Cited by 102
Evaluation of hybrid steel fiber reinforcement in high performance geopolymer composites
Gao, X., Yu, Q., Yu, R., & Brouwers, H. J. H. (2017) · Materials and Structures · doi:10.1617/s11527-017-1030-x · Cited by 99
Thermal and mechanical properties of cotton fabric-reinforced geopolymer composites
Alomayri, T. S., Shaikh, F. U. A., & Low, I. M. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7479-2 · Cited by 96
Behera, P. K., Baheti, V., Militký, J., & Naeem, S. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.11.109 · Cited by 96
Nematollahi, B., Qiu, J., Yang, E., & Sanjayan, J. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.08.118 · Cited by 88
Improving the interface bond between fiber mesh and cementitious matrix
Mu, B., Meyer, C., & Shimanovich, S. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)00715-9 · Cited by 87
Hot-pressed geopolymer: Dual effects of heat and curing time
Ranjbar, N., Kashefi, A., & Maheri, M. R. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.11.004 · Cited by 83
Self-citationAlleman, J. E., & Mossman, B. T. (1997) · Scientific American · doi:10.1038/scientificamerican0797-70 · Cited by 77
Alkali-activated slag mortars reinforced with ar glassfibre. Performance and properties
Puertas, F., Gil-Maroto, A., Palacios, M., & Amat, T. (2006) · Materiales de Construcción · doi:10.3989/mc.2006.v56.i283.10 · Cited by 72
Application of geopolymer paste for concrete repair
Ding, Y., Cheng, T., & Dai, Y. (2017) · Structural Concrete · doi:10.1002/suco.201600161 · Cited by 72
Mechanical Properties and Durability of Fiber Reinforced Alkali Activated Slag Concrete
Behfarnia, K., & Rostami, M. (2017) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0002073 · Cited by 68
Carbon nanotube reinforced alkali-activated slag mortars
Rovnaník, P., Šimonová, H., Topolář, L., Bayer, P., Schmid, P., & Keršner, Z. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.05.051 · Cited by 62
SiC fiber reinforced geopolymer composites, part 1: Short SiC fiber
Yuan, J., He, P., Jia, D., Yan, S. M., Cai, D., Xu, L., Yang, Z., Duan, X., Wang, S., & Zhou, Y. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.12.067 · Cited by 54
Sayyad, A. S., & Patankar, S. V. (2013) · Indian Journal of Materials Science · doi:10.1155/2013/357563 · Cited by 51
Oxygen and Chloride Permeability of Alkali-Activated Natural Pozzolan Concrete
Bondar, D., Lynsdale, C. J., Milestone, N. B., et al. (2012) · ACI Materials Journal · doi:10.14359/51683570 · Cited by 43
The Durability and Performance of Short Fibers for a Newly Developed Alkali-Activated Binder
Funke, H., Gelbrich, S., & Kroll, L. (2016) · Fibers · doi:10.3390/fib4010011 · Cited by 34
Alkali-activated slag mortars reinforced with ar glassfibre. Performance and properties
Amat, T., Palacios, M., Gil-Maroto, A., et al. (2006) · DOAJ (DOAJ: Directory of Open Access Journals) · Cited by 33
The development of a high temperature tensile testing rig for composite laminates
Mills-Brown, J., Potter, K., Foster, S., & Batho, T. (2013) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2013.04.009 · Cited by 27
Kroehong, W., Jaturapitakkul, C., Pothisiri, T., & Chindaprasirt, P. (2018) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-017-3059-0 · Cited by 27
Zhao, W., Wang, Y., Wang, X., & Wu, D. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.01.022 · Cited by 23
Mechanical properties of fly ash geopolymer mortar reinforced with carbon fibers
Frayyeh, Q. J., & Swaif, A. (2018) · MATEC Web of Conferences · doi:10.1051/matecconf/201816202028 · Cited by 11
Astutiningsih, S., Nugroho, Y. S., Sastry, S. M. L., et al. (2014) · Ceramic transactions /Ceramic transactions · doi:10.1002/9781118932995.ch23 · Cited by 4
Cited by
Shehata, N., Mohamed, O. A., Sayed, E. T., Abdelkareem, M. A., & Olabi, A. G. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2022.155577 · Cited by 371
Zhao, J., Tong, L., Li, B., Chen, T., Wang, C., Yang, G., & Zheng, Y. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127085 · Cited by 369
Metadata
- Authors
- Ranjbar, N., & Zhang, M.
- Venue
- Cement and Concrete Composites
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 107
- Pages
- 103498
- ISSN
- 0958-9465 (ISSN-L)
- OpenAlex
- W2997003310
- Cited by
- 651
- References
- 134
- FWCI
- 38.31
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.