3D printing geopolymers: A review
Open accessThe DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
Geopolymers have been considered as a promising alternative to cementitious materials for 3D printing to enhance sustainability of the construction industry. This paper presents a critical review of the state-of-the-art of 3D printing geopolymers from the perspectives of production process, printability requirement, mix design, early-age material properties and sustainability, with a special focus on the effects of different factors such as matrix composition, reinforcement type, curing regime and printing configuration on the fresh and hardened properties of 3D printed geopolymers. The relationship between key fresh properties and printability of geopolymers is discussed, based on which the potential optimal mix proportions are obtained, containing the blended precursors of fly ash, ground granulated blast-furnace slag and silica fume, liquid or solid activator, river sand with a maximum size of 2 mm, thixotropic additives (e.g., nano clay), and retarder (e.g., sucrose). This paper aims to summarise the recent advances in the development of 3D printing techniques suitable for geopolymers and geopolymers feasible for 3D printing, and to identify the knowledge gap, remaining challenges, and opportunities for future research.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
One-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
Bos, F., Wolfs, R., Ahmed, Z., & Salet, T. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1209867 · Cited by 1,257
Developments in construction-scale additive manufacturing processes
Lim, S., Buswell, R. A., Le, T. T., Austin, S. A., Gibb, A. G. F., & Thorpe, T. (2012) · Automation in Construction · doi:10.1016/j.autcon.2011.06.010 · Cited by 1,205
Building components for an outpost on the lunar soil by means of a novel 3D printing technology
Cesaretti, G., Dini, E., De Kestelier, X., Colla, V., & Pambaguian, L. (2014) · Acta Astronautica · doi:10.1016/j.actaastro.2013.07.034 · Cited by 806
Mega-scale fabrication by Contour Crafting
Khoshnevis, B., Hwang, D., Yao, K. T., & Yeh, Z. (2006) · International Journal of Industrial and Systems Engineering · doi:10.1504/ijise.2006.009791 · Cited by 378
Metadata
- Authors
- Zhong, H., & Zhang, M.
- Venue
- Cement and Concrete Composites
- Publisher
- Elsevier BV
- Published
- 2022-04
- Volume
- 128
- Pages
- 104455
- ISSN
- 0958-9465 (ISSN-L)
- OpenAlex
- W4213334403
- Cited by
- 176
- References
- 7
- FWCI
- 14.14
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D printing geopolymers: A review. https://app.cochat.ai/papers/10.1016/j.cemconcomp.2022.104455
- The paper
- Zhong, H., & Zhang, M. (2022). 3D printing geopolymers: A review. Cement and Concrete Composites. https://doi.org/10.1016/j.cemconcomp.2022.104455
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.