The DOI matches its Crossref record; 183 of the 191 references it cites were found in a registry or an index.
One-part alkali-activated materials: A review
Open accessAbstract
Alkali-activated materials (AAM) are recognized as potential alternatives to ordinary Portland cement (OPC) in order to limit CO 2 emissions as well as beneficiate several wastes into useful products. However, the alkali activation process involves concentrated aqueous alkali solutions, which are corrosive, viscous, and, as such, difficult to handle and not user friendly. Consequently, the development of so-called one-part or “just add water” AAM may have greater potential than the conventional two-part AAM, especially in cast-in-situ applications. One-part AAM involves a dry mix that consists of a solid aluminosilicate precursor, a solid alkali source, and possible admixtures to which water is added, similar to the preparation of OPC. The dry mix can be prepared at elevated temperatures to facilitate the reactivity of certain raw materials. This review discusses current studies of one-part AAMs in terms of raw materials, activators, additives, mechanical and physical properties, curing mechanisms, hydration products, and environmental impacts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The mechanical strength of one-part geopolymers was found to be comparable to that of two-part geopolymers prepared with liquid activators [46].”
From A Review on Geopolymer Technology for Lunar Base Construction (2022) · cites this paper as [46]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A safe operating space for humanity
Rockström, J., Steffen, W., Noone, K., Persson, Å., Chapin, F. S., Lambin, E. F., Lenton, T. M., Scheffer, M., Folke, C., Schellnhuber, H. J., et al. (2009) · Nature · doi:10.1038/461472a · Cited by 13,333
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Davidovits, J. (1991) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/bf01912193 · Cited by 4,305
Ullmann's Encyclopedia of Industrial Chemistry
(2000) · Wiley eBooks · doi:10.1002/14356007 · Cited by 3,811
Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete
Turner, L. K., & Collins, F. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.01.023 · Cited by 2,468
Provis, J. L. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.009 · Cited by 2,272
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
Lea's Chemistry of Cement and Concrete
(2019) · Elsevier eBooks · doi:10.1016/c2013-0-19325-7 · Cited by 1,938
Duxson, P., Provis, J. L., Lukey, G. C., Mallicoat, S., Kriven, W. M., & van Deventer, J. S. J. (2005) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2005.06.060 · Cited by 1,812
New cements for the 21st century: The pursuit of an alternative to Portland cement
Shi, C., Jiménez, A. F., & Palomo, A. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.016 · Cited by 1,691
Research works printed but not linked: 7
- H. Kühl, Slag cement and process making the same, US Patent 900,939 (1908).
- Purdon, 1940, The action of alkalis on blast-furnace slag, J. Soc. Chem. Ind., 59, 191
- R.F. Heitzmann, M. Fitzgerald, J.L. Sawyer, Mineral binder and compositions employing the same, Mineral binder and compositions employing the same. US Patent 4,642,137 (1987).
- W. Schwarz, A. Lerat, Tectoaluminosilicate cement and a process for its manufacture, Tectoaluminosilicate cement and a process for its manufacture. U.S. Patent 5,372,640 (1994).
- J. Davidovits, Method for obtaining a geopolymeric binder allowing to stabilize, solidify and consolidate toxic or waste materials, Method for obtaining a geopolymeric binder allowing to stabilize, solidify and consolidate toxic or waste materials. U.S. Patent 5,349,118 (1994).
- García-Lodeiro, 2012, Hybrid alkaline cements. Part I: Fundamentals, Rev. Rom. Mater. Rom. J. Mater., 42, 330
- Gluth, 2013, Geopolymerization of a silica residue from waste treatment of chlorosilane production, Mater. Struct., 46, 1291, 10.1617/s11527-012-9972-5 · DOI
Cited by
Sorted by citations
Recent progress in low-carbon binders
Shi, C., Qu, B., & Provis, J. L. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.009 · Cited by 732
Drying shrinkage in alkali-activated binders – A critical review
Mastali, M., Kinnunen, P., Dalvand, A., Mohammadi-Firouz, R., & Illikainen, M. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.09.125 · Cited by 470
Advances in alkali-activation of clay minerals
Khalifa, A., Çizer, Ö., Pontikes, Y., Heath, A. C., Patureau, P., Bernal, S. A., & Marsh, A. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106050 · Cited by 457
Wang, A., Zheng, Y., Zhang, Z., Liu, K., Li, Y., Shi, L., & Sun, D. (2020) · Engineering · doi:10.1016/j.eng.2019.08.019 · Cited by 397
Oderji, S. Y., Chen, B., Ahmad, M. R., & Shah, S. F. A. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.03.290 · Cited by 362
Hao, H., Bi, K., Chen, W., Pham, T. M., & Li, J. (2022) · Engineering Structures · doi:10.1016/j.engstruct.2022.115477 · Cited by 328
Geopolymer foams: An overview of recent advancements
Novais, R. M., Pullar, R. C., & Labrincha, J. A. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100621 · Cited by 305
Rheology of alkali-activated materials: A review
Lu, C., Zhang, Z., Shi, C., Li, N., Jiao, D., & Yuan, Q. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104061 · Cited by 291
A review of cold sintering processes
Grasso, S., Biesuz, M., Zoli, L., Taveri, G., Duff, A. I., Ke, D., Jiang, A., & Reece, M. J. (2020) · Advances in Applied Ceramics Structural Functional and Bioceramics · doi:10.1080/17436753.2019.1706825 · Cited by 292
Lao, J.-C., Huang, B.-T., Fang, Y., Xu, L.-Y., Dai, J., & Shah, S. P. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.107075 · Cited by 283
Vinai, R., & Soutsos, M. N. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.11.008 · Cited by 284
Pathways towards sustainable concrete
Coffetti, D., Crotti, E., Gazzaniga, G., Carrara, M., Pastore, T., & Coppola, L. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.106718 · Cited by 289
Properties and characterization of green one-part geopolymer activated by composite activators
Ma, C., Zhao, B., Guo, S., Long, G., & Xie, Y. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.02.159 · Cited by 274
Comparison of alkali and silica sources in one-part alkali-activated blast furnace slag mortar
Luukkοnen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.202 · Cited by 264
Jaya, N. A., Yun-Ming, L., Cheng-Yong, H., Abdullah, M. M. A. B., & Kamarudin, H. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118641 · Cited by 262
Zhang, B., Zhu, H., Cheng, Y., Huseien, G. F., & Shah, K. W. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.125993 · Cited by 261
Ma, C., Long, G., Shi, Y. H., & Xie, Y. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.060 · Cited by 256
Synthesis and characterization of one-part geopolymers for extrusion based 3D concrete printing
Panda, B., Singh, G. V. P. B., Unluer, C., & Tan, M. J. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.02.185 · Cited by 255
Incorporation of biochar in cementitious materials: A roadmap of biochar selection
Maljaee, H., Madadi, R., Paiva, H., Tarelho, L., & Ferreira, V. M. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122757 · Cited by 250
Enhancing the strength of pre-made foams for foam concrete applications
Hajimohammadi, A., Ngo, T., & Mendis, P. A. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.12.014 · Cited by 236
A critical review on application of alkali activated slag as a sustainable composite binder
Awoyera, P. O., & Adesina, A. (2019) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2019.e00268 · Cited by 226
Alrefaei, Y., & Dai, J. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.07.012 · Cited by 214
Tan, H., Deng, X., He, X., Zhang, J., Zhang, X., Su, Y., & Yang, J. G. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.01.012 · Cited by 206
Fiber-reinforced alkali-activated concrete: A review
Amran, M., Федюк, Р. С., Abdelgader, H. S., Murali, G., Ozbakkaloglu, T., Lee, Y. H., & Lee, Y. Y. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.103638 · Cited by 203
One-part geopolymer cement from slag and pretreated paper sludge
Adesanya, E., Ohenoja, K., Luukkοnen, T., Kinnunen, P., & Illikainen, M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.007 · Cited by 202
Nodehi, M., Ozbakkaloglu, T., & Gholampour, A. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.104038 · Cited by 200
Engineered geopolymer composites: A state-of-the-art review
Zhong, H., & Zhang, M. (2022) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2022.104850 · Cited by 200
Alternation of traditional cement mortars using fly ash-based geopolymer mortars modified by slag
Shang, J., Dai, J., Zhao, T.-J., Guo, S.-Y., Zhang, P., & Mu, B. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.255 · Cited by 198
Zhang, B., Zhu, H., Feng, P., & Zhang, P. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.104056 · Cited by 197
The effectiveness of different superplasticizers in ambient cured one-part alkali activated pastes
Alrefaei, Y., Wang, Y., & Dai, J. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.12.027 · Cited by 193
Additive manufacturing of cementitious composites: Materials, methods, potentials, and challenges
Hamidi, F., & Aslani, F. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.05.140 · Cited by 202
Machine learning to predict properties of fresh and hardened alkali-activated concrete
Gomaa, E. Y., Han, T., ElGawady, M. A., Huang, J., & Kumar, A. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103863 · Cited by 191
Development of high strength one-part geopolymer mortar using sodium metasilicate
Dong, M., Elchalakani, M., & Karrech, A. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117611 · Cited by 189
Liu, Z., Wang, J., Jiang, Q., Cheng, G., Li, L., Kang, Y., & Wang, D. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.018 · Cited by 187
One part alkali activated materials: A state-of-the-art review
El-Zeadani, M., Bompa, D. V., & Elghazouli, A. Y. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.104871 · Cited by 183
Improvement of early strength of fly ash-slag based one-part alkali activated mortar
Shah, S. F. A., Chen, B., Oderji, S. Y., Haque, M. A., & Ahmad, M. R. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118533 · Cited by 181
Oderji, S. Y., Chen, B., Shakya, C., Ahmad, M. R., & Shah, S. F. A. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.116891 · Cited by 180
Degradation mechanism of hybrid fly ash/slag based geopolymers exposed to elevated temperatures
Luo, Y., Li, S., Klima, K. M., Brouwers, H. J. H., & Yu, Q. (2021) · Cement and Concrete Research · doi:10.1016/j.cemconres.2021.106649 · Cited by 178
3D printing geopolymers: A review
Zhong, H., & Zhang, M. (2022) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2022.104455 · Cited by 186
Muthukrishnan, S., Ramakrishnan, S., & Sanjayan, J. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120786 · Cited by 173
Adesanya, E., Perumal, P., Luukkοnen, T., Yliniemi, J., Ohenoja, K., Kinnunen, P., & Illikainen, M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.125558 · Cited by 173
Gao, X., Yao, X., Yang, T., Zhou, S., Wei, H., & Zhang, Z. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.125015 · Cited by 174
Moukannaa, S., Nazari, A., Bagheri, A., Loutou, M., Sanjayan, J., & Hakkou, R. (2019) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2018.12.031 · Cited by 172
Development of Cleaner One-part geopolymer from lithium slag
Shah, S. F. A., Chen, B., Ahmad, M. R., & Haque, M. A. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.125241 · Cited by 172
Jamalimoghadam, M., Ajalloeian, R., & Hajiannia, A. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.06.071 · Cited by 171
Review on the use of volcanic ashes for engineering applications
Lemougna, P. N., Wang, K.-T., Tang, Q. G., Nzeukou, A. N., Billong, N., Melo, U. C., & Cui, X. (2018) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2018.05.031 · Cited by 180
Abbas, R., Khereby, M. A., Ghorab, H. Y., & Elkhoshkhany, N. (2020) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-020-01811-4 · Cited by 170
A Review of Recent Developments and Advances in Eco-Friendly Geopolymer Concrete
Imtiaz, L., Rehman, S. K. U., Memon, S. A., Khan, M. K., & Javed, M. F. (2020) · Applied Sciences · doi:10.3390/app10217838 · Cited by 167
Waste-derived activators for alkali-activated materials: A review
Alnahhal, M. F., Kim, T., & Hajimohammadi, A. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.103980 · Cited by 167
Gökçe, H. S., Tuyan, M., & Nehdi, M. L. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124483 · Cited by 171
A review: Alkali-activated cement and concrete production technologies available in the industry
Segura, I. P., Ranjbar, N., Damø, A. J., Jensen, L. S., Canut, M. M. C., & Jensen, P. A. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e15718 · Cited by 174
Autogenous shrinkage of alkali-activated slag: A critical review
Li, Z., Chen, Y., Provis, J. L., Çizer, Ö., & Ye, G. (2023) · Cement and Concrete Research · doi:10.1016/j.cemconres.2023.107244 · Cited by 167
Current Applications of Recycled Aggregates from Construction and Demolition: A Review
dos Reis, G. S., Quattrone, M., Ambrós, W. M., Cazacliu, B. G., & Sampaio, C. H. (2021) · Materials · doi:10.3390/ma14071700 · Cited by 166
Sulfuric acid resistance of one-part alkali-activated mortars
Sturm, P., Gluth, G. J. G., Jäger, C., Brouwers, H. J. H., & Kühne, H. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.009 · Cited by 163
Mine tailings-based geopolymers: A comprehensive review
He, T., Yuhua, Z., Qaidi, S., Isleem, H. F., Zaid, O., Althoey, F., & Ahmad, J. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.05.345 · Cited by 163
Li, L., Xie, J., Zhang, B., Feng, Y., & Yang, J. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.130389 · Cited by 165
Behaviour of alkali-activated concrete at elevated temperatures: A critical review
Tu, W., & Zhang, M. (2023) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2023.104961 · Cited by 161
Environmental and economic perspective of waste-derived activators on alkali-activated mortars
Abdulkareem, M., Havukainen, J., Nuortila‐Jokinen, J., & Horttanainen, M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124651 · Cited by 160
Mechanical properties and reaction mechanism of one-part geopolymer mortars
Zhang, H., Liu, J., & Wu, B. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121973 · Cited by 159
Durability characteristics of geopolymer concrete - Progress and perspectives
Pradhan, P., Dwibedy, S., Pradhan, M., Panda, S., & Panigrahi, S. K. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.105100 · Cited by 158
Shilar, F. A., Ganachari, S. V., Patil, V. B., Khan, T. M. Y., & Khadar, S. D. A. (2022) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2022.e01014 · Cited by 154
A mix design methodology of slag and fly ash-based alkali-activated paste
Sun, B., Sun, Y., Ye, G., & Schutter, G. D. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104368 · Cited by 153
Utilization potential of mine tailings in geopolymers: Physicochemical and environmental aspects
Лазоренко, Г. И., Kasprzhitskii, A., Shaikh, F. U. A., Krishna, R. S., & Mishra, J. (2021) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2020.12.028 · Cited by 152
Revathi, T., & Jeyalakshmi, R. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120965 · Cited by 151
Nunes, V. A., & Borges, P. H. R. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122605 · Cited by 154
Durability of low-carbon geopolymer concrete: A critical review
Zhang, B. (2024) · Sustainable materials and technologies · doi:10.1016/j.susmat.2024.e00882 · Cited by 161
Geopolymer: A Systematic Review of Methodologies
Matsimbe, J. J., Dinka, M. O., Olukanni, D. O., & Musonda, I. (2022) · Materials · doi:10.3390/ma15196852 · Cited by 151
Jiang, D., Li, X., Lv, Y., Li, C., Jiang, W., Liu, Z., Xu, J., Zhou, Y., & Dan, J. (2021) · Cement and Concrete Research · doi:10.1016/j.cemconres.2021.106581 · Cited by 149
Geopolymer Concrete: A Material for Sustainable Development in Indian Construction Industries
Verma, M., Dev, N., Rahman, I., Nigam, M., Ahmed, M., & Mallick, J. (2022) · Crystals · doi:10.3390/cryst12040514 · Cited by 149
Glass waste versus sand as aggregates: The characteristics of the evolving geopolymer binders
Hajimohammadi, A., Ngo, T., & Kashani, A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.05.086 · Cited by 148
Mohammed, B. S., Haruna, S., Wahab, M. M. A., Liew, M. S., & Haruna, A. (2019) · Heliyon · doi:10.1016/j.heliyon.2019.e02255 · Cited by 147
Luukkοnen, T., Sreenivasan, H., Abdollahnejad, Z., Yliniemi, J., Kantola, A. M., Telkki, V., Kinnunen, P., & Illikainen, M. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117354 · Cited by 152
Guo, W., Zhang, Z., Bai, Y., Zhao, G., Sang, Z., & Zhao, Q. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.123367 · Cited by 144
Samarakoon, M. H., Ranjith, P. G., Duan, W., & Silva, V. R. S. D. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103679 · Cited by 142
The microstructure and durability of fly ash-based geopolymer concrete: A review
Fu, Q., Xu, W., Zhao, X., Bu, M., Yuan, Q., & Niu, D. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.07.190 · Cited by 142
Munir, Q., Abdulkareem, M., Horttanainen, M., & Kärki, T. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2022.161230 · Cited by 142
Sustainable one-part geopolymer foams with glass fines versus sand as aggregates
Hajimohammadi, A., Ngo, T., & Kashani, A. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.03.120 · Cited by 141
Qian, L.-P., Xu, L.-Y., Alrefaei, Y., Wang, T., Ishida, T., & Dai, J. (2021) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2021.105971 · Cited by 140
Shah, S. F. A., Chen, B., Oderji, S. Y., Haque, M. A., & Ahmad, M. R. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118221 · Cited by 137
Fořt, J., & Černý, R. (2020) · Waste Management · doi:10.1016/j.wasman.2020.09.004 · Cited by 137
Tan, H., Li, M., He, X., Su, Y., Yang, J. G., & Zhao, H. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120465 · Cited by 134
Yang, T., Gao, X., Zhang, J., Zhuang, X., Wang, H., & Zhang, Z. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.110024 · Cited by 135
Ma, C., Zhao, B., Wang, L., Long, G., & Xie, Y. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119279 · Cited by 133
Ladle slag characteristics and use in mortar and concrete: A comprehensive review
Najm, O. F., El-Hassan, H., & El-Dieb, A. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.125584 · Cited by 133
Abdollahnejad, Z., Mastali, M., Woof, B., & Illikainen, M. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118129 · Cited by 131
Is net-zero feasible: Systematic review of cement and concrete decarbonization technologies
Nehdi, M. L., Marani, A., & Zhang, L. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.114169 · Cited by 141
Zhong, H., & Zhang, M. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104167 · Cited by 127
Komkova, A., & Habert, G. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129032 · Cited by 128
Shoaei, P., Ameri, F., Musaeei, H. R., Ghasemi, T., & Cheah, C. B. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118991 · Cited by 122
RetractedHuynh, A. T., Nguyen, Q. D., Lieu, Q. X., Magee, B. J., Chung, T., Tran, K. T., & Nguyen, K. T. (2020) · Applied Sciences · doi:10.3390/app10217726 · Cited by 121
A newly developed self-compacting geopolymer concrete under ambient condition
Rahman, S. K., & Al-Ameri, R. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121822 · Cited by 120
Palomo, A., Maltseva, O., García-Lodeiro, I., & Fernández‐Jiménez, A. (2021) · Frontiers in Chemistry · doi:10.3389/fchem.2021.705475 · Cited by 126
Lemougna, P. N., Adediran, A. A., Yliniemi, J., Ismailov, A., Levänen, E., Tanskanen, P., Kinnunen, P., Röning, J., & Illikainen, M. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103792 · Cited by 117
Mohammed, B. S., Haruna, S., Wahab, M. M. A., & Liew, M. S. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.07.267 · Cited by 116
Geopolymer as the future oil-well cement: A review
Adjei, S. B., Elkatatny, S. M., Aggrey, W. N., & Abdelraouf, Y. A. (2021) · Journal of Petroleum Science and Engineering · doi:10.1016/j.petrol.2021.109485 · Cited by 115
Kan, L., Wang, W., Liu, W., & Wu, M. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103521 · Cited by 114
Nodehi, M., Ozbakkaloglu, T., Gholampour, A., Mohammed, T., & Shi, X. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.126335 · Cited by 113
Liu, Q., Li, X., Cui, M., Wang, J., & Lyu, X. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126806 · Cited by 112
Nuaklong, P., Wongsa, A., Sata, V., Boonserm, K., Sanjayan, J., & Chindaprasirt, P. (2019) · Heliyon · doi:10.1016/j.heliyon.2019.e02513 · Cited by 110
Deng, Z., Yang, Z., Lin, J., Lin, J., Hong, G., Hong, G., Yang, Z., & Ye, Y. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.128690 · Cited by 109
Metadata
- Authors
- Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M.
- Affiliations
- University of Oulu (FI)
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2018-01
- Volume
- 103
- Pages
- 21-34
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2768077267
- Cited by
- 1,456
- References
- 191
- Citations by year
- 2026: 223 · 2025: 201 · 2024: 212 · 2023: 203 · 2022: 216 · 2021: 159 · 2020: 121 · 2019: 87 · 2018: 32
- FWCI
- 17.47
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Cement and Concrete Research (publishedVersion, cc-by-nc-nd)
- Funders
- Tekes (1105/31/2016)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Concrete and Cement Materials Research
- Physical Sciences › Materials Science › Materials Chemistry › Magnesium Oxide Properties and Applications
- Physical Sciences › Environmental Science › Environmental Engineering › Microbial Applications in Construction Materials
- Keywords
- alkali-activated materials, aluminosilicate precursors, alkaline activator, dry mix, CO2 emission reduction, waste valorization, curing mechanism, hydration products, mechanical properties, environmental impact
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
