The DOI matches its Crossref record; 183 of the 191 references it cites were found in a registry or an index.
One-part alkali-activated materials: A review
Open accessAbstract
Alkali-activated materials (AAM) are recognized as potential alternatives to ordinary Portland cement (OPC) in order to limit CO 2 emissions as well as beneficiate several wastes into useful products. However, the alkali activation process involves concentrated aqueous alkali solutions, which are corrosive, viscous, and, as such, difficult to handle and not user friendly. Consequently, the development of so-called one-part or “just add water” AAM may have greater potential than the conventional two-part AAM, especially in cast-in-situ applications. One-part AAM involves a dry mix that consists of a solid aluminosilicate precursor, a solid alkali source, and possible admixtures to which water is added, similar to the preparation of OPC. The dry mix can be prepared at elevated temperatures to facilitate the reactivity of certain raw materials. This review discusses current studies of one-part AAMs in terms of raw materials, activators, additives, mechanical and physical properties, curing mechanisms, hydration products, and environmental impacts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The mechanical strength of one-part geopolymers was found to be comparable to that of two-part geopolymers prepared with liquid activators [46].”
From A Review on Geopolymer Technology for Lunar Base Construction (2022) · cites this paper as [46]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A safe operating space for humanity
Rockström, J., Steffen, W., Noone, K., Persson, Å., Chapin, F. S., Lambin, E. F., Lenton, T. M., Scheffer, M., Folke, C., Schellnhuber, H. J., et al. (2009) · Nature · doi:10.1038/461472a · Cited by 13,333
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Davidovits, J. (1991) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/bf01912193 · Cited by 4,305
Ullmann's Encyclopedia of Industrial Chemistry
(2000) · Wiley eBooks · doi:10.1002/14356007 · Cited by 3,811
Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete
Turner, L. K., & Collins, F. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.01.023 · Cited by 2,468
Provis, J. L. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.009 · Cited by 2,272
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
Lea's Chemistry of Cement and Concrete
(2019) · Elsevier eBooks · doi:10.1016/c2013-0-19325-7 · Cited by 1,938
Duxson, P., Provis, J. L., Lukey, G. C., Mallicoat, S., Kriven, W. M., & van Deventer, J. S. J. (2005) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2005.06.060 · Cited by 1,812
New cements for the 21st century: The pursuit of an alternative to Portland cement
Shi, C., Jiménez, A. F., & Palomo, A. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.016 · Cited by 1,691
Flagged first, then by citations
8 of the 191 references couldn’t be matched to a known paper.
Research works printed but not linked: 7
- H. Kühl, Slag cement and process making the same, US Patent 900,939 (1908).
- Purdon, 1940, The action of alkalis on blast-furnace slag, J. Soc. Chem. Ind., 59, 191
- R.F. Heitzmann, M. Fitzgerald, J.L. Sawyer, Mineral binder and compositions employing the same, Mineral binder and compositions employing the same. US Patent 4,642,137 (1987).
- W. Schwarz, A. Lerat, Tectoaluminosilicate cement and a process for its manufacture, Tectoaluminosilicate cement and a process for its manufacture. U.S. Patent 5,372,640 (1994).
- J. Davidovits, Method for obtaining a geopolymeric binder allowing to stabilize, solidify and consolidate toxic or waste materials, Method for obtaining a geopolymeric binder allowing to stabilize, solidify and consolidate toxic or waste materials. U.S. Patent 5,349,118 (1994).
- García-Lodeiro, 2012, Hybrid alkaline cements. Part I: Fundamentals, Rev. Rom. Mater. Rom. J. Mater., 42, 330
- Gluth, 2013, Geopolymerization of a silica residue from waste treatment of chlorosilane production, Mater. Struct., 46, 1291, 10.1617/s11527-012-9972-5 · DOI
Cited by
Sorted by citations
Items 801–900 of 1,000
Jiang, J., Miao, Y., Ran, Q., Li, Y., Li, Y., Tao, Z., & Lu, Z. (2025) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2025.106149 · Cited by 11
Thermal degradation of copper-modified geopolymer containing graphene oxide under cyclic heating
Tran, N. P., & Ngo, T. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.142194 · Cited by 10
Pei, J. S. F., Choo, C. S., Khaerudini, D. S., Bong, S. H., Ong, D. E. L., & Sunarso, J. (2025) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2025.106364 · Cited by 10
Effect of Carbonation on Abrasion Resistance of Alkali-Activated Slag with Various Activators
Kim, H.-K., Song, K.-I., Song, J., & Jang, J. G. (2019) · Materials · doi:10.3390/ma12172812 · Cited by 10
Dakhane, A., & Neithalath, N. (2022) · Recent Progress in Materials · doi:10.21926/rpm.2202006 · Cited by 10
Oderji, S. Y., Chen, B., & Mohseni, E. (2023) · European Journal of Environmental and Civil engineering · doi:10.1080/19648189.2023.2182367 · Cited by 10
Sustainable cementitious composites with 30% porosity and a compressive strength of 30 MPa
Wu, S., Moges, K. A., Vashistha, P., & Pyo, S. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.07.036 · Cited by 10
Baenla, J., Ndjock, I. B. D. L., Dickson, B. M. P., Belibi, P. D. B., Mbah, J. B. B., & Elimbi, A. (2023) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2023.128533 · Cited by 10
El-Zeadani, M., Bompa, D. V., & Elghazouli, A. Y. (2023) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2023.108276 · Cited by 10
Utilization of Waste Brick Powder as a Partial Replacement of Portland Cement in Mortars
Zou, Z. K., Provoost, S., & Gruyaert, E. (2024) · Sustainability · doi:10.3390/su16020624 · Cited by 10
Ganta, M., Jyosyula, S. K. R., & Baskar, R. (2024) · Innovative Infrastructure Solutions · doi:10.1007/s41062-024-01457-x · Cited by 10
Investigation of the Effects of Magnesium-Sulfate as Slag Activator
Kang, C., & Kim, T. (2020) · Materials · doi:10.3390/ma13020305 · Cited by 10
Fakhrian, S., Behbahani, H., & Mashhadi, S. (2020) · DOAJ (DOAJ: Directory of Open Access Journals) · doi:10.22115/scce.2020.220919.1182 · Cited by 10
Liberto, T., Dalconi, M. C., Sasso, G. D., Bellotto, M. P., & Robisson, A. (2023) · Journal of the American Ceramic Society · doi:10.1111/jace.19173 · Cited by 9
Optimized fire resistance of alkali-activated high-performance concrete by steel fiber
Wang, D., Luo, B., Deng, J., Feng, Q., Zhang, W., Deng, C., Mensah, R. A., Restás, Á., Rácz, S., Rauscher, J., et al. (2024) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-024-13238-w · Cited by 9
Kotanci, I., Uysal, M., Balaban, M., Bendjilali, F., & Aygün, B. F. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.109751 · Cited by 9
Wong, K. S., Ting, M. Z. Y., & Chua, K. S. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.110367 · Cited by 9
Kuang, L., Li, G., Ma, W., Liu, L., & Cui, X. (2024) · Applied Clay Science · doi:10.1016/j.clay.2024.107544 · Cited by 9
Soureshjani, O. K., Massumi, A., & Nouri, G. (2024) · Acta Astronautica · doi:10.1016/j.actaastro.2024.10.056 · Cited by 11
Mustafayeva, A., Moon, S.-W., Satyanaga, A., & Kim, J. R. (2024) · Minerals · doi:10.3390/min14111145 · Cited by 9
Sun, Z., Li, X., Gan, M., Ji, Z., Fan, X., Tang, Q., & Xing, J. (2024) · Cleaner Engineering and Technology · doi:10.1016/j.clet.2024.100867 · Cited by 9
Ge, W., Mao, H., Chen, J., Liu, H., Min, F., Zhu, Y., & Song, S. (2024) · Chemical Physics · doi:10.1016/j.chemphys.2024.112586 · Cited by 9
Ali, N., & Soliman, A. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.139812 · Cited by 9
Shi, H., Zang, Q., Wang, Y., Qian, H., Zong, Z., Cai, J., Li, M., & Lin, Y. (2025) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2025.e04503 · Cited by 9
Zhou, Z., Li, S., Hu, G., Wu, J. H., Yao, C., & Niu, F. (2025) · Developments in the Built Environment · doi:10.1016/j.dibe.2025.100641 · Cited by 9
The retention of flowability and rheological properties in one-part alkali activated materials
Siddika, A., Alnahhal, M. F., & Hajimohammadi, A. (2025) · Journal of Building Engineering · doi:10.1016/j.jobe.2025.112672 · Cited by 9
Su, L., Li, J., Wu, S., Zhang, X., & Liang, B. (2025) · Journal of Building Engineering · doi:10.1016/j.jobe.2025.112754 · Cited by 9
Ma, B., Li, Y., Lan, T., Huang, B., Chen, J., Peng, Q., Du, B., & Ma, M. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.141923 · Cited by 9
Corrosion resistance of AISI 304 stainless steel in belitic calcium sulfoaluminate cement
Geng, Z. T., Bi, X., & Shi, J. (2025) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2025.106154 · Cited by 9
Development of one-part geopolymer binder produced from alkali fused boron mine tailings
Kızıltepe, C. Ç., Yüksel, İ., Aydın, S., & Sığındere, A. (2025) · Journal of Building Engineering · doi:10.1016/j.jobe.2025.113099 · Cited by 10
Yang, X., Wu, S., Xu, S., Liu, C., Chen, B., Chen, D., & Yang, C. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.142514 · Cited by 9
Peter, R. N. A., Zheng, A. L. T., Koo, L. F., Wong, T. J., & Andou, Y. (2025) · International Journal of Energy and Water Resources · doi:10.1007/s42108-025-00391-7 · Cited by 9
Javan, K., Chaggar, P. K., Darestani, M. T., Markhali, B. P., Katwal, U., & Duarte, M. C. (2026) · Cleaner Environmental Systems · doi:10.1016/j.cesys.2026.100408 · Cited by 9
Abbasnejad, S. Y., & Modarres, A. (2019) · Road Materials and Pavement Design · doi:10.1080/14680629.2019.1580208 · Cited by 9
Matějková, P., Matějka, V., Sabovčík, T., Gryžbon, L., & Vlček, J. (2022) · Journal of Sustainable Metallurgy · doi:10.1007/s40831-022-00513-z · Cited by 9
Li, M., Huang, G., Cui, Y., Wang, B., Zhang, S., Wang, Q., & Feng, J. (2022) · Crystals · doi:10.3390/cryst12081018 · Cited by 9
Negahban, E., Bagheri, A., & Sanjayan, J. (2022) · Road Materials and Pavement Design · doi:10.1080/14680629.2022.2161934 · Cited by 9
Yong-Jie, H., Cheng-Yong, H., Yun-Ming, L., Abdullah, M. M. A. B., Lee, Y. S., Wei-Hao, L., Pakawanit, P., Shee-Ween, O., Hoe-Woon, T., & Cheng-Hsuan, H. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.136264 · Cited by 9
Sun, Z., Li, X., Gan, M., Ji, Z., Fan, X., & Xing, J. (2024) · Sustainability · doi:10.3390/su16187912 · Cited by 9
Rosas-Casárez, C. A., Arredondo-Rea, S. P., Ramos‐Ortíz, G., Corral-Higuera, R., Cruz‐Enríquez, A., Gómez-Soberón, J. M., Velusamy, J., Zárraga-Núñez, R. A., & Campos‐Gaxiola, J. J. (2019) · Materials Letters · doi:10.1016/j.matlet.2019.05.017 · Cited by 9
Ounissi, C., Mahmoudi, S., Valentini, L., Bennour, A., Garbin, E., Artioli, G., & Montacer, M. (2020) · Clay Minerals · doi:10.1180/clm.2020.14 · Cited by 9
Pagnotta, S., Lluveras‐Tenorio, A., Tinè, M. R., & Lezzerini, M. (2020) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/609/1/012057 · Cited by 9
Mechanical Properties and Microstructure of Geopolymer Binder Based on Umeanyar Slatestone Powder
Astariani, N. K., Salain, I. M. A. K., Sutarja, I. N., & Widiarsa, I. B. R. (2021) · Civil Engineering and Architecture · doi:10.13189/cea.2021.090604 · Cited by 9
Wei, Z., Liu, Q., Sun, Z., Huang, X., Gan, M., Ji, Z., Chen, X., & Fan, X. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.128776 · Cited by 9
Revue de la réglementation sur la valorisation des résidus miniers hors site au Québec
Tardif-Drolet, M., Li, L., Pabst, T., Zagury, G. J., Mermillod-Blondin, R., & Genty, T. (2019) · Environmental Reviews · doi:10.1139/er-2018-0116 · Cited by 9
Huang, G., Zhang, Y., Mi, H., Zhang, X., Liu, M., Fang, B., & Wang, C. (2022) · Polymers · doi:10.3390/polym14235176 · Cited by 8
Ramaraj, S. G., Saravana Karthikeyan, S. K. S., Zhang, F., Liu, X., & Kong, C. Y. (2023) · Vacuum · doi:10.1016/j.vacuum.2023.112340 · Cited by 8
Xu, D., Guan-feng, A., Chen, Y., Liu, Z., & Liu, X. (2023) · Materials · doi:10.3390/ma17010028 · Cited by 8
Han, Y., Yang, B., Zhang, G.-Y., & Wang, X.-Y. (2024) · Archives of Civil and Mechanical Engineering · doi:10.1007/s43452-023-00842-0 · Cited by 8
Hybrid Organic–Inorganic Blast Furnace Slag Binders Activated with Alkali Acetates
Huang, Y., Marsh, A., Yue, Z., Krishnan, S., Adu-Amankwah, S., & Bernal, S. A. (2024) · ACS Omega · doi:10.1021/acsomega.4c04857 · Cited by 8
Alrawashdeh, A. A., Zamorano, M., Alshaaer, M., & Martín-Morales, M. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.111078 · Cited by 14
Utilization of waste glass as precursor material in one-part alkali-activated aggregates
Chen, Y., Zou, C., Yong, C. L., Jan, R. J. S., Tan, T. H., Lin, J., & Mo, K. H. (2024) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2024.10.204 · Cited by 8
Abdelhalim, J. O., Amer, I., Abdel-Latif, I., Fawzy, I., Ismail, S., & Khalaf, M. A. (2025) · Scientific Reports · doi:10.1038/s41598-025-85225-6 · Cited by 10
Loyola, E., Shaikh, F. U. A., & Vargas, F. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.140189 · Cited by 8
Zhai, J., Niu, X., Chen, P., Fan, C., Chen, Z., & Yang, Y. (2025) · Journal of Environmental Management · doi:10.1016/j.jenvman.2025.124801 · Cited by 8
Cantador-Fernández, D., Álvarez, J. I., Navarro-Blasco, Í., Jiménez, J. R., & Fernández, J. M. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.164424 · Cited by 8
Factors Affecting Consolidation in Geopolymers for Stabilization of Galvanic Sludge
Genua, F., Giovini, M., Santoni, E., Berrettoni, M., Lancellotti, I., & Leonelli, C. (2025) · Materials · doi:10.3390/ma18133015 · Cited by 8
Chen, Y., Ma, H., Ye, C., & Ba, M. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.143855 · Cited by 8
Preparation and characterization of self-cured geopolymer binder using metakaolin precursor
Khater, H. M. M., & ElMoied, S. A. (2026) · Scientific Reports · doi:10.1038/s41598-025-32571-0 · Cited by 8
Towards eco-friendly mining: Alkali-activated materials from mine waste for pollution mitigation
Ma, Z., Sun, X., Wan, X., Sun, Y., Zheng, Y., Zhang, X., Qiu, J., & Zhao, Y. (2026) · Green and Smart Mining Engineering · doi:10.1016/j.gsme.2026.01.001 · Cited by 8
Decarbonising the Cement and Concrete Industry—A Step Forward to a Sustainable Future
Luhar, S., Ashour, A. F., & Luhar, I. (2026) · Journal of Composites Science · doi:10.3390/jcs10050226 · Cited by 13
EXPERIMENTAL STUDY ON PERVIOUS CEMENT AND PERVIOUS GEOPOLYMER CONCRETES USING SEA SAND AND SEAWATER
Nguyen-Van, D. (2022) · International Journal of Geomate · doi:10.21660/2022.99.3592 · Cited by 8
Ibrahim, M., Ali, M. R., Joseph, J. J. I., Shameem, M., Al-Osta, M. A., Khalid, H. R., & Bahraq, A. A. (2022) · Environmental Science and Pollution Research · doi:10.1007/s11356-022-25006-0 · Cited by 8
Pei, J. S. F., Soh, M., Choo, C. S., Ong, D. E. L., Ng, S. M., & Sunarso, J. (2023) · Next Materials · doi:10.1016/j.nxmate.2023.100015 · Cited by 10
Green Building Materials for Circular Economy - Geopolymer Foams
Korniejenko, K., Pławecka, K., Bazan, P., Figiela, B., Kozub, B., Mróz, K., & Łach, M. (2023) · Proceedings of Engineering and Technology Innovation · doi:10.46604/peti.2023.11997 · Cited by 8
Shagñay, S., Bautista, A., Velasco, F., Ramón-Álvarez, I., & Torres‐Carrasco, M. (2023) · Journal of Sustainable Cement-Based Materials · doi:10.1080/21650373.2023.2260794 · Cited by 8
Molecular dynamics study of surface alkalization reaction in high calcium systems
Hong, F., Liu, C., Wang, M., Ji, X. L., Wang, M., Li, Z., Hou, D., & Li, M. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.109475 · Cited by 8
A Review of Strategies to Achieve Net Zero Targets in the Cement and Concrete Sectors
Boakye, K. A., Winters, D., Oguntola, O., Fenton, K., & Simske, S. (2024) · Sustainable development · doi:10.5772/intechopen.1005051 · Cited by 11
Chen, H., Zhang, Y., Chen, J., Qin, Z., & Wu, P. (2024) · Structural Concrete · doi:10.1002/suco.202400006 · Cited by 8
Rashid, K., Raoof, M. N., Daud, M., Wang, Y., & Ju, M. (2024) · Structures · doi:10.1016/j.istruc.2024.107108 · Cited by 8
Nikolov, A., Kostov-Kytin, V. V., Petrova, N., Tsvetanova, L., Vassilev, S. V., & Titorenkova, R. (2025) · Ceramics · doi:10.3390/ceramics8030079 · Cited by 8
Abdollahnejad, Z., Mastali, M., Rahim, F., Luukkοnen, T., Kinnunen, P., & Illikainen, M. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-818961-0.00029-6 · Cited by 8
Estabilización química de suelos - Materiales convencionales y activados alcalinamente (revisión)
Rivera, J. F., Aguirre-Guerrero, A. M., de Gutiérrez, R. M., & Orobio, A. (2020) · Informador Técnico · doi:10.23850/22565035.2530 · Cited by 8
Клименко, Н. Н., Mikhailenko, N. Y., Delitsin, L. M., & Sigaev, V. N. (2020) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-020-04935-3 · Cited by 8
Sheen, Y., & Le, D.-H. (2022) · Sugar Tech · doi:10.1007/s12355-022-01141-3 · Cited by 8
Effect of Slaked Lime on the Properties of Sodium Sulfate-Activated Alkali-Activated Slag Cement
He, J., Li, M., Bai, W., Sang, G., & Song, X. (2024) · Processes · doi:10.3390/pr12010184 · Cited by 8
Effects of different curing conditions on the properties of geopolymeric mortar
Yaprak, H., Alnkaa, A., Memi, S. U., & Kaplan, G. (2019) · MOJ Civil Engineering · doi:10.15406/mojce.2019.05.00148 · Cited by 8
Difference between geopolymers and alkali-activated materials
Shoaei, P., Ameri, F., Karimzadeh, M., Atabakhsh, E., Zareei, S. A., & Behforouz, B. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-821730-6.00018-8 · Cited by 8
Huang, G., Zhu, J., Zhang, Y., Li, D., Wang, B., Li, M., Jin, L., & Jinghai, G. (2022) · Crystals · doi:10.3390/cryst12040470 · Cited by 8
Zhong, H., Wang, Y., & Zhang, M. (2023) · Journal of Advanced Concrete Technology · doi:10.3151/jact.21.405 · Cited by 7
Geopolymer Flat Slabs with Synthetic Coarse Aggregate under Punching
Azevedo, E. P., de Oliveira, D. R. C., & Nzambi, A. K. L. L. (2024) · ACI Structural Journal · doi:10.14359/51740573 · Cited by 7
Chloride transport in alkali-activated materials influenced by different reaction products: a review
Liu, T., Fan, J., & Peng, Z. (2024) · Magazine of Concrete Research · doi:10.1680/jmacr.23.00285 · Cited by 7
Upscaling of Copper Slag-Based Geopolymer to 3D Printing Technology
Kozub, B., Sitarz, M., Gądek, S., Ziejewska, C., Mróz, K., & Hager, I. (2024) · Materials · doi:10.3390/ma17225581 · Cited by 7
Zhao, J., Liu, J., Wu, K., Mao, X., & Liu, Q. (2024) · Journal of Materials in Civil Engineering · doi:10.1061/jmcee7.mteng-18560 · Cited by 7
Damion, T., Soda, P. R. K., & Gupta, S. (2025) · Journal of Building Engineering · doi:10.1016/j.jobe.2025.112396 · Cited by 7
Yang, Z., Zhang, Z., Liu, Y., Zhang, X. J., Kang, S., Lv, L., & Zhou, J. (2025) · Journal of Environmental Management · doi:10.1016/j.jenvman.2025.125022 · Cited by 7
Alkali activation of calcined clays: a comprehensive review for sustainable cementitious systems
Barbhuiya, S., Das, B., Adak, D., & Saha, S. (2025) · Magazine of Concrete Research · doi:10.1680/jmacr.25.00137 · Cited by 7
Poojalakshmi, E. S., Nagarajan, P., Sudhakumar, J., Thomas, B. S., & Das, S. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.144078 · Cited by 7
Mechanical and Microstructural Properties of Alkali Pozzolan Cement (APC)
Kulasuriya, C., Dias, W. P. S., Vimonsatit, V., & Silva, P. D. (2020) · International Journal of Civil Engineering · doi:10.1007/s40999-020-00534-3 · Cited by 7
Utilization of Treated Agricultural Residue Ash as Sodium Silicate in Alkali Activated Slag Systems
Ataie, F. F. (2021) · Materials · doi:10.3390/ma14020329 · Cited by 7
Alanqari, K. A., Al-Yami, A. S., & Wagle, V. B. (2022) · International Petroleum Technology Conference · doi:10.2523/iptc-22617-ea · Cited by 7
Rheokinetic modeling of N-A-S–H gel formation related to alkali-activated aluminosilicate materials
Mills, J., & Wagner, N. J. (2022) · Rheologica Acta · doi:10.1007/s00397-022-01351-2 · Cited by 7
A state-of-the-art review on the utilization of calcareous fillers in the alkali activated cement
Ma, J., Wang, T., Wang, H., Yu, Z., & Shen, X. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129348 · Cited by 9
Gong, J., Ma, Y., Wang, Y., Cao, Y., Fu, J., & Wang, H. (2023) · Journal of Sustainable Cement-Based Materials · doi:10.1080/21650373.2023.2266837 · Cited by 7
Amin, M. N., Khan, S. A., Al-Naghi, A. A. A., Latifee, E. R., Alnawmasi, N., & Deifalla, A. F. (2024) · REVIEWS ON ADVANCED MATERIALS SCIENCE · doi:10.1515/rams-2023-0162 · Cited by 7
Amin, M. N., Al-Naghi, A. A. A., Nassar, R., Algassem, O., Khan, S. A., & Deifalla, A. F. (2024) · REVIEWS ON ADVANCED MATERIALS SCIENCE · doi:10.1515/rams-2024-0006 · Cited by 7
Effect of precursor element composition on compressive strength of alkali-activated dredged sediment
Zhang, K., Lu, H., & Li, Z. (2024) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2024.e03404 · Cited by 7
Sustainable additive manufacturing of concrete with low-carbon materials
Bong, S. H., & Du, H. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-15672-4.00011-5 · Cited by 7
Huang, G., Huang, Y., Zheng, X., Zhang, F., Xu, J., Qi, J., & Chen, Z. (2024) · Crystals · doi:10.3390/cryst14121086 · Cited by 7
Microbial treatment of aluminosilicate solid wastes: A green technique for cementitious materials
Kong, L., Sun, S., Liu, B., Zhang, S., Zhang, X., Liu, Y., Yang, H., & Zhao, Y. (2025) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2025.145216 · Cited by 7
Metadata
- Authors
- Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M.
- Affiliations
- University of Oulu (FI)
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2018-01
- Volume
- 103
- Pages
- 21-34
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2768077267
- Cited by
- 1,456
- References
- 191
- Citations by year
- 2026: 223 · 2025: 201 · 2024: 212 · 2023: 203 · 2022: 216 · 2021: 159 · 2020: 121 · 2019: 87 · 2018: 32
- FWCI
- 17.47
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Cement and Concrete Research (publishedVersion, cc-by-nc-nd)
- Funders
- Tekes (1105/31/2016)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Concrete and Cement Materials Research
- Physical Sciences › Materials Science › Materials Chemistry › Magnesium Oxide Properties and Applications
- Physical Sciences › Environmental Science › Environmental Engineering › Microbial Applications in Construction Materials
- Keywords
- alkali-activated materials, aluminosilicate precursors, alkaline activator, dry mix, CO2 emission reduction, waste valorization, curing mechanism, hydration products, mechanical properties, environmental impact
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
