The DOI matches its Crossref record; 183 of the 191 references it cites were found in a registry or an index.
One-part alkali-activated materials: A review
Open accessAbstract
Alkali-activated materials (AAM) are recognized as potential alternatives to ordinary Portland cement (OPC) in order to limit CO 2 emissions as well as beneficiate several wastes into useful products. However, the alkali activation process involves concentrated aqueous alkali solutions, which are corrosive, viscous, and, as such, difficult to handle and not user friendly. Consequently, the development of so-called one-part or “just add water” AAM may have greater potential than the conventional two-part AAM, especially in cast-in-situ applications. One-part AAM involves a dry mix that consists of a solid aluminosilicate precursor, a solid alkali source, and possible admixtures to which water is added, similar to the preparation of OPC. The dry mix can be prepared at elevated temperatures to facilitate the reactivity of certain raw materials. This review discusses current studies of one-part AAMs in terms of raw materials, activators, additives, mechanical and physical properties, curing mechanisms, hydration products, and environmental impacts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The mechanical strength of one-part geopolymers was found to be comparable to that of two-part geopolymers prepared with liquid activators [46].”
From A Review on Geopolymer Technology for Lunar Base Construction (2022) · cites this paper as [46]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A safe operating space for humanity
Rockström, J., Steffen, W., Noone, K., Persson, Å., Chapin, F. S., Lambin, E. F., Lenton, T. M., Scheffer, M., Folke, C., Schellnhuber, H. J., et al. (2009) · Nature · doi:10.1038/461472a · Cited by 13,333
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Davidovits, J. (1991) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/bf01912193 · Cited by 4,305
Ullmann's Encyclopedia of Industrial Chemistry
(2000) · Wiley eBooks · doi:10.1002/14356007 · Cited by 3,811
Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete
Turner, L. K., & Collins, F. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.01.023 · Cited by 2,468
Provis, J. L. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.009 · Cited by 2,272
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
Lea's Chemistry of Cement and Concrete
(2019) · Elsevier eBooks · doi:10.1016/c2013-0-19325-7 · Cited by 1,938
Duxson, P., Provis, J. L., Lukey, G. C., Mallicoat, S., Kriven, W. M., & van Deventer, J. S. J. (2005) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2005.06.060 · Cited by 1,812
New cements for the 21st century: The pursuit of an alternative to Portland cement
Shi, C., Jiménez, A. F., & Palomo, A. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.016 · Cited by 1,691
Research works printed but not linked: 7
- H. Kühl, Slag cement and process making the same, US Patent 900,939 (1908).
- Purdon, 1940, The action of alkalis on blast-furnace slag, J. Soc. Chem. Ind., 59, 191
- R.F. Heitzmann, M. Fitzgerald, J.L. Sawyer, Mineral binder and compositions employing the same, Mineral binder and compositions employing the same. US Patent 4,642,137 (1987).
- W. Schwarz, A. Lerat, Tectoaluminosilicate cement and a process for its manufacture, Tectoaluminosilicate cement and a process for its manufacture. U.S. Patent 5,372,640 (1994).
- J. Davidovits, Method for obtaining a geopolymeric binder allowing to stabilize, solidify and consolidate toxic or waste materials, Method for obtaining a geopolymeric binder allowing to stabilize, solidify and consolidate toxic or waste materials. U.S. Patent 5,349,118 (1994).
- García-Lodeiro, 2012, Hybrid alkaline cements. Part I: Fundamentals, Rev. Rom. Mater. Rom. J. Mater., 42, 330
- Gluth, 2013, Geopolymerization of a silica residue from waste treatment of chlorosilane production, Mater. Struct., 46, 1291, 10.1617/s11527-012-9972-5 · DOI
Cited by
Sorted by citations
Items 601–700 of 1,000
Jagadisha, H. M., Pandit, P., Prashant, S., Bhole, L., Singh, Y., Verma, O., & Kumar, M. (2025) · International Journal of Concrete Structures and Materials · doi:10.1186/s40069-025-00822-z · Cited by 19
Effect of high temperatures on the mechanical behaviour of hybrid cement
Qu, B., Fernández‐Jiménez, A., Palomo, A., Martín, A., & Pastor, J. Y. (2020) · Materiales de Construcción · doi:10.3989/mc.2020.13318 · Cited by 19
Improvement of swelling chlorite soil using sodium silicate alkali activator
Elmannaey, A. S., Fouad, H. E. E., & Youssef, Y. G. (2021) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2020.10.019 · Cited by 19
Liu, Q., Chuanming, L., Su, H.-L., Wang, J., & Xianjun, L. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.105586 · Cited by 19
One-part eco-friendly alkali-activated concrete – An innovative sustainable alternative
Reddy, R. R. K., Yaragal, S. C., & Srinivasa, A. S. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.133741 · Cited by 19
Alhamoud, A., Riahi, H. T., & Ataei, A. (2023) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-023-08419-y · Cited by 19
On the action mechanism of phosphate-based superplasticizers in one-part alkali-activated slag
Sha, S., Wang, Y., & Ye, H. (2024) · Cement and Concrete Research · doi:10.1016/j.cemconres.2024.107659 · Cited by 20
Hybrid Alkaline Cements: Bentonite-Opc Binders
García-Lodeiro, I., Fernández‐Jiménez, A., & Palomo, A. (2018) · Minerals · doi:10.3390/min8040137 · Cited by 19
de Oliveira, V. M., de Souza, F., da Cruz, R. T., Goldenberg, P. L., Kirchheim, A. P., & Bragança, S. R. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.102474 · Cited by 19
Development of fly ash-based geopolymers using powder sodium silicate activator
Galiano, Y. L., Leiva, C., Torralvo, F. A., Villegas, R., Vilches, L. F., & Fernández‐Pereira, C. (2022) · Materials Letters · doi:10.1016/j.matlet.2022.132346 · Cited by 19
Consoli, N. C., de Oliveira, J. P., Lotero, A., Filho, H. C. S., & Núñez, V. F. (2024) · Transportation Geotechnics · doi:10.1016/j.trgeo.2024.101306 · Cited by 18
Meng, D., Djobo, J. N. Y., Segura, I. P., Kaze, C. R., Kuenzel, C., & Ranjbar, N. (2025) · Materials Today · doi:10.1016/j.mattod.2025.11.024 · Cited by 18
Li, J., Xie, F., Chen, S., Pang, S., Fan, H., Zhang, X., & Wan, Z. (2026) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2026.145213 · Cited by 18
Nikvar-Hassani, A., Manjarrez, L., & Zhang, L. (2021) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0004008 · Cited by 18
Immobilization of Hazardous Wastes on One-Part Blast Furnace Slag-Based Geopolymers
Paz-Gómez, D. C., Vilarinho, I. S., Pérez-Moreno, S. M., Carvalheiras, J., Guerrero, J. L., Novais, R. M., Seabra, M. P. D. S., Ríos, G., Bolívar, J. P., & Labrincha, J. A. (2021) · Sustainability · doi:10.3390/su132313455 · Cited by 24
Modification of carbonate-activated binder for lead-zinc mine tailings based cemented paste backfill
Wang, X., Wang, X., & Shi, X. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.126871 · Cited by 18
Preparation and characterization of a novel alkali-activated magnesite cement
Abdel‐Gawwad, H. A., Tawfik, T. A., Sikora, P., & Elrahman, M. A. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.128384 · Cited by 18
Effect of nickel slag on the basic tensile creep of alkali-activated slag/nickel slag mortars
Ma, Y., Zhang, B., Lin, Y., Huang, Y., Zheng, D., & Ji, T. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.128778 · Cited by 18
Li, M., Huang, G., Cui, Y., Wang, B., Chang, B., Yin, Q., Zhang, S., Wang, Q., Feng, J., & Ge, M. (2022) · Polymers · doi:10.3390/polym14193980 · Cited by 18
Pan, D., Yan, S., Liu, X., Sun, X., Wu, Y., Wang, X., Dan, J., Yang, X., & Wang, J. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.10.042 · Cited by 18
Preparation and hydration of industrial solid waste—cement blends: A review
Zhang, Q., Liu, B., Xiao, K., Ekberg, C. H., & Zhang, S. (2022) · International Journal of Minerals Metallurgy and Materials · doi:10.1007/s12613-022-2538-9 · Cited by 18
Ponomar, V., Ohenoja, K., & Illikainen, M. (2022) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2022.130575 · Cited by 18
Alkali-bauxite fusion method of synthesizing ambient-cured volcanic ash geopolymer cement mortars
Tchadjié, L. N., Ekolu, S. O., & Quainoo, H. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.131401 · Cited by 18
Sun, T., Fan, J., Ouyang, G., Xu, F., Wang, Z., Yin, W., & Li, W. (2023) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2023.e02135 · Cited by 18
Singh, S., Badkul, A., & Pal, B. (2023) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-023-01852-z · Cited by 18
Lin, J., Tan, T. H., Yeo, J. S., Goh, Y., Ling, T., & Mo, K. H. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.140714 · Cited by 18
Tian, X., Shuai, J., Wu, J., Luo, J., & Yan, Z. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.137500 · Cited by 18
Eryılmaz, K., & Polat, R. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.110512 · Cited by 18
Fibers, Geopolymers, Nano and Alkali-Activated Materials for Deep Soil Mix Binders
Wong, J. K. H., Kok, S. T., & Wong, S. Y. (2020) · Civil Engineering Journal · doi:10.28991/cej-2020-03091511 · Cited by 18
Adewumi, A. A. (2020) · Ceramics - Silikaty · doi:10.13168/cs.2020.0028 · Cited by 18
Barve, P., Bahrami, A., & Shah, S. G. (2024) · The Open Construction and Building Technology Journal · doi:10.2174/0118748368292859240313061706 · Cited by 17
Sun, J., Guo, Y., Meng, Y. J., Jia, R., Zhou, J., Gao, H., & Liu, J. (2025) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2024.103015 · Cited by 17
Gou, J., Li, S., Jiang, C., Li, Z., & You, G. (2025) · Materials · doi:10.3390/ma18091964 · Cited by 17
Characteristic of One-Part Geopolymer as Building Materials
Yun-Ming, L., Wan-En, O., Cheng-Yong, H., Abdullah, M. M. A. B., & Shee-Ween, O. (2021) · Lecture notes in civil engineering · doi:10.1007/978-981-33-4918-6_6 · Cited by 17
Effect of Graphene Oxide on Properties of Alkali-Activated Slag
Dong, Q., Wan, L., Luan, C., Wang, J., & Du, P. (2021) · Materials · doi:10.3390/ma14206107 · Cited by 17
A review on suitability of using geopolymer concrete for rigid pavement
Rambabu, D., Sharma, S. K., & Akbar, M. A. (2022) · Innovative Infrastructure Solutions · doi:10.1007/s41062-022-00878-w · Cited by 17
Mare, M. D., & Ouellet‐Plamondon, C. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.135658 · Cited by 17
Perez-Cortes, P., García-Lodeiro, I., Puertas, F., & Alonso, C. (2023) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2023.105210 · Cited by 17
Developing Geopolymer Concrete by Using Ferronickel Slag and Ground-Granulated Blast-Furnace Slag
Nguyen, Q. D., & Castel, A. (2023) · Ceramics · doi:10.3390/ceramics6030114 · Cited by 18
Wu, X., Li, B., Wei, D., Guo, F., & Ji, H. (2023) · Materials · doi:10.3390/ma16247522 · Cited by 17
Wear behavior in pastes of alkali-activated materials: Influence of precursor and alkali solution
Shagñay, S., Velasco, F., del Campo, A., & Torres‐Carrasco, M. (2020) · Tribology International · doi:10.1016/j.triboint.2020.106293 · Cited by 17
Luukkοnen, T., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2020) · PLoS ONE · doi:10.1371/journal.pone.0242462 · Cited by 19
Samarakoon, M. H., Ranjith, P. G., Duan, W., Chen, B. K., & Khandelwal, M. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121543 · Cited by 17
de Gasperi, J., Holthusen, D., Howes, M. F. D., Sattler, N., Longhi, M. A., & Rodríguez, E. D. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.123145 · Cited by 17
Jeong, Y., Kang, S.-H., Du, Y., & Moon, J. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.04.009 · Cited by 17
Font, A., Soriano, L., Monzó, J., Moraes, J. C. B., Borrachero, M. V., & Payá, J. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117114 · Cited by 17
High-temperature strengthening of Portland cementitious materials by surface micro-ceramization
Shi, W., Wang, Z., Li, C., Sun, Q., Wang, W., Deng, S., Li, W., & Xie, A. (2025) · Cement and Concrete Research · doi:10.1016/j.cemconres.2025.107790 · Cited by 16
Huang, M., Qiu, Z., Bao, S., Zhang, Y., Zhou, Z., Yang, S., & Ke, X. (2025) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2025.116270 · Cited by 16
Li, Z. G., Feng, J., Pradhan, S., Chu, S. H., & Qian, S. (2025) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2025.106115 · Cited by 16
EFFECTS OF COMPOSITION OF FLY ASH-BASED ALKALI-ACTIVATED MATERIALS ON COMPRESSIVE STRENGTH: A REVIEW
Tian, Q. (2020) · Ceramics - Silikaty · doi:10.13168/cs.2020.0037 · Cited by 16
Paaver, P., Paiste, P., Liira, M., & Kirsimäe, K. (2020) · Minerals · doi:10.3390/min11010003 · Cited by 16
Missoum, S., Kacimi, L., & Kaci, A. (2021) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-021-01213-8 · Cited by 16
Potential utilization of sugarcane bagasse ash for developing alkali-activated materials
Le, D.-H., Sheen, Y., & Lam, M. N.-T. (2021) · Journal of Sustainable Cement-Based Materials · doi:10.1080/21650373.2021.1920513 · Cited by 16
Geopolymerization: a promising technique for membrane synthesis
Sadiq, M., Naveed, A., Arif, M., Hassan, S., Afridi, S., Asif, M., Sultana, S., Amin, N.-U., Younas, M., Khan, M. N., et al. (2021) · Materials Research Express · doi:10.1088/2053-1591/ac30e4 · Cited by 16
Cao, R., Zhang, B., Wang, L., Ding, J., & Chen, X. (2022) · Advances in Structural Engineering · doi:10.1177/13694332211065186 · Cited by 16
Properties and Microstructure of Na2CO3-Activated Binders Modified with Ca(OH)2 and Mg(OH)2
Xie, L., & Liu, K. (2022) · Materials · doi:10.3390/ma15051687 · Cited by 16
Dynamic Shear Modulus and Damping Ratio of the One-Part Geopolymer Stabilized Soft Clay
Min, Y., Wu, J. H., Li, B., & Zhang, J. (2022) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0004278 · Cited by 16
Shen, S., Tian, J., Zhu, Y., Zhang, X., & Hu, P. (2022) · Materials Today Sustainability · doi:10.1016/j.mtsust.2022.100169 · Cited by 16
Alkali-Activated Metakaolins: Mineral Chemistry and Quantitative Mineral Composition
Valášková, M., Klika, Z., Vlček, J., Matějová, L., Topinková, M., Pálková, H., & Madejová, J. (2022) · Minerals · doi:10.3390/min12111342 · Cited by 16
Deterioration and mitigation of efflorescence of alkali-activated phosphorus slag
Jia, R., Wang, Q., & Luo, T. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.133500 · Cited by 16
Tesanasin, T., Suksiripattanapong, C., Kuasakul, T., Thongkhwan, T., Tabyang, W., Thumrongvut, J., & Keawsawasvong, S. (2023) · Transportation Infrastructure Geotechnology · doi:10.1007/s40515-023-00345-8 · Cited by 16
Yang, G., Lei, G., Liu, T., Zheng, S., Qu, B., Que, C., Feng, Y., & Jiang, G. (2024) · Geoenergy Science and Engineering · doi:10.1016/j.geoen.2024.212846 · Cited by 16
Liu, M., Zhang, Y., Wang, C., & Ma, Z. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.136973 · Cited by 16
Ting, M. Z. Y., Sun, X., & Yi, Y. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.137832 · Cited by 16
Korat, L., & Ducman, V. (2020) · Frontiers in Materials · doi:10.3389/fmats.2020.572347 · Cited by 16
Sadeghi, S., Karimi, M., Radfar, I., Gavinehroudi, R. G., Saberi, D., & Heydari, A. (2021) · New Journal of Chemistry · doi:10.1039/d0nj05459c · Cited by 16
Sood, D., & Hossain, K. M. A. (2021) · Journal of Composites Science · doi:10.3390/jcs5020059 · Cited by 16
Feng, B., Jiesheng, L., Wei, J., Chen, Y., Tongtong, Z., Tan, X., & Sun, Z. (2022) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2022.e01127 · Cited by 16
Abed, M. H., Abbas, I. S., & Çanakçı, H. (2022) · Advances in Cement Research · doi:10.1680/jadcr.21.00205 · Cited by 16
Degefu, D. M., Liao, Z., Berardi, U., Labbé, G., & Akhmetova, I. (2022) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2022.106743 · Cited by 16
A Novel Approach for 3D Printing Fiber-Reinforced Mortars
Ungureanu, D., Onuțu, C., Isopescu, D. N., Ţăranu, N., Zghibarcea, Ș. V., Spiridon, I. A., & Polcovnicu, R. A. (2023) · Materials · doi:10.3390/ma16134609 · Cited by 16
Salas, I., Cifrián, E., Soriano, L., Monzó, J., & Andrés, A. (2024) · Journal of Environmental Management · doi:10.1016/j.jenvman.2024.122265 · Cited by 15
Zhou, Z., Chen, B., & Ahmad, M. R. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.143276 · Cited by 15
Improved compressive strength and fracture toughness analysis of natural soil based geopolymer
Nadeem, M. S., Ahmed, F., Haq, E. U., Zain-ul-abdein, M., Raza, A., Afzal, U., Bibi, S., & Deen, Z. S. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.103241 · Cited by 15
Characterization of a Geopolymer Foam by X-ray Tomography
Petlitckaia, S., Vincente, J., & Poulesquen, A. (2021) · Frontiers in Chemistry · doi:10.3389/fchem.2021.754355 · Cited by 15
Peracetic acid as a novel blowing agent in the direct foaming of alkali-activated materials
Bhuyan, M. A. H., Kurtuluş, C., Heponiemi, A., & Luukkοnen, T. (2022) · Applied Clay Science · doi:10.1016/j.clay.2022.106727 · Cited by 17
Toprak, S. M. U., Polat, R., Levet, A., & Toprak, Ş. N. (2023) · Journal of Building Engineering · doi:10.1016/j.jobe.2023.106059 · Cited by 15
Development of One-Part Rock-Based Geopolymers for Downhole Cementing Applications
Omran, M., & Khalifeh, M. (2023) · Journal of Energy Resources Technology · doi:10.1115/1.4062250 · Cited by 15
Zhang, L., Wang, Y., Ding, B., Gu, J., & Cai, J. (2023) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2023.e02230 · Cited by 15
Ercan, E. E. T., Ćwirzeń, A., & Habermehl-Cwirzen, K. (2023) · Materials · doi:10.3390/ma16155347 · Cited by 19
Efficacy of Coal Gangue as a Precursor in Synthesis of Geopolymer
Gaddam, A. G., Amulya, G., Yamsani, S. K., & Gondu, V. R. (2023) · Indian geotechnical journal · doi:10.1007/s40098-023-00804-6 · Cited by 15
Shi, J., Bayraktar, O. Y., Bayrak, B., Bodur, B., Öz, A., Kaplan, G., & Aydın, A. C. (2023) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2023.128681 · Cited by 15
Effect of Cement Type on Compacted Iron Ore Tailings-Binder Response Blends: Comparative Study
Consoli, N. C., Lotero, A., Filho, H. C. S., Khajeh, A., Daassi-Gli, C. A. P., Vogt, J. C., & Silva, J. P. D. S. (2024) · Journal of Materials in Civil Engineering · doi:10.1061/jmcee7.mteng-17486 · Cited by 15
Wei, J., Chen, K., Yu, H., Wang, S., Zhang, S., & Pan, C. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.111429 · Cited by 15
Abdulkarim, A., Riahi, H. T., & Ataei, A. (2024) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2024.e04124 · Cited by 15
Kallayil, A., Patadiya, J., Kandasubramanian, B., Олегович, А. А., Kchaou, M., & Aldawood, F. K. (2025) · ACS Omega · doi:10.1021/acsomega.4c04943 · Cited by 17
Glass powder and high-calcium fly ash based binders – Long term examinations
Gołek, Ł. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.02.095 · Cited by 15
Xu, L., Wang, X., Guan, C., Wu, W., & Zhang, L. (2020) · Advances in Civil Engineering · doi:10.1155/2020/1764108 · Cited by 15
Toward sustainable lightweight durable bricks using alkali-activated hemp-based materials
Ebrahim, Z., Mastali, M., & Maguire, M. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.130609 · Cited by 15
Bhina, M. R., Liu, K., Hu, J.-E. H. Y., & Tsai, C.-T. (2023) · Polymers · doi:10.3390/polym15051084 · Cited by 16
Yin, X., Li, K., Ma, L., Qing, S., Wang, D., He, B., Huang, K. J., Yang, J., & Dai, Q. (2025) · Powder Technology · doi:10.1016/j.powtec.2025.121276 · Cited by 14
Serag, M. I., Ibrahim, S., Badawy, A. H., Helal, Y. H., & El-Feky, M. S. (2025) · Scientific Reports · doi:10.1038/s41598-025-13775-w · Cited by 14
Trialling one-part geopolymer production including iron ore tailings as fillers
Mazzinghy, D. B., Figueiredo, R. A. M., Parbhakar-Fox, A. K., Yahyaei, M., Vaughan, J., & Powell, M. (2022) · International Journal of Mining Reclamation and Environment · doi:10.1080/17480930.2022.2047271 · Cited by 14
Pavlin, M., König, K., König, J., Javornik, U., & Ducman, V. (2022) · Frontiers in Materials · doi:10.3389/fmats.2022.902139 · Cited by 14
Effect of washing aggregate sludge waste on the properties of alkali-activated blast furnace slag
Bilici, S., Kabay, N., Miyan, N., Omur, T., & Özkan, H. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.105527 · Cited by 14
Kong, D., Zhou, Z., Song, S., & Jiang, R. (2023) · Materials · doi:10.3390/ma16020499 · Cited by 14
Incorporating Industrial By-Products into Geopolymer Mortar: Effects on Strength and Durability
Лам, Т. В., & Nguyen, M. H. (2023) · Materials · doi:10.3390/ma16124406 · Cited by 14
Rasmus, J., Ohenoja, K., Oksanen, J., Adesanya, E., Kinnunen, P., & Illikainen, M. (2023) · Journal of Building Engineering · doi:10.1016/j.jobe.2023.107113 · Cited by 14
Rudić, O., Mittermayr, F., Gluth, G. J. G., Simon, S., Ukrainczyk, N., Seyrek, Y., Freytag, B., Juhart, J., & Grengg, C. (2023) · Ceramics International · doi:10.1016/j.ceramint.2023.08.036 · Cited by 14
Ferrara, P. L., Noce, M. L., & Sciuto, G. (2023) · Sustainability · doi:10.3390/su152216047 · Cited by 19
Metadata
- Authors
- Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M.
- Affiliations
- University of Oulu (FI)
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2018-01
- Volume
- 103
- Pages
- 21-34
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2768077267
- Cited by
- 1,456
- References
- 191
- Citations by year
- 2026: 223 · 2025: 201 · 2024: 212 · 2023: 203 · 2022: 216 · 2021: 159 · 2020: 121 · 2019: 87 · 2018: 32
- FWCI
- 17.47
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Cement and Concrete Research (publishedVersion, cc-by-nc-nd)
- Funders
- Tekes (1105/31/2016)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Concrete and Cement Materials Research
- Physical Sciences › Materials Science › Materials Chemistry › Magnesium Oxide Properties and Applications
- Physical Sciences › Environmental Science › Environmental Engineering › Microbial Applications in Construction Materials
- Keywords
- alkali-activated materials, aluminosilicate precursors, alkaline activator, dry mix, CO2 emission reduction, waste valorization, curing mechanism, hydration products, mechanical properties, environmental impact
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
