The DOI matches its Crossref record; 183 of the 191 references it cites were found in a registry or an index.
One-part alkali-activated materials: A review
Open accessAbstract
Alkali-activated materials (AAM) are recognized as potential alternatives to ordinary Portland cement (OPC) in order to limit CO 2 emissions as well as beneficiate several wastes into useful products. However, the alkali activation process involves concentrated aqueous alkali solutions, which are corrosive, viscous, and, as such, difficult to handle and not user friendly. Consequently, the development of so-called one-part or “just add water” AAM may have greater potential than the conventional two-part AAM, especially in cast-in-situ applications. One-part AAM involves a dry mix that consists of a solid aluminosilicate precursor, a solid alkali source, and possible admixtures to which water is added, similar to the preparation of OPC. The dry mix can be prepared at elevated temperatures to facilitate the reactivity of certain raw materials. This review discusses current studies of one-part AAMs in terms of raw materials, activators, additives, mechanical and physical properties, curing mechanisms, hydration products, and environmental impacts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The mechanical strength of one-part geopolymers was found to be comparable to that of two-part geopolymers prepared with liquid activators [46].”
From A Review on Geopolymer Technology for Lunar Base Construction (2022) · cites this paper as [46]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A safe operating space for humanity
Rockström, J., Steffen, W., Noone, K., Persson, Å., Chapin, F. S., Lambin, E. F., Lenton, T. M., Scheffer, M., Folke, C., Schellnhuber, H. J., et al. (2009) · Nature · doi:10.1038/461472a · Cited by 13,333
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Davidovits, J. (1991) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/bf01912193 · Cited by 4,305
Ullmann's Encyclopedia of Industrial Chemistry
(2000) · Wiley eBooks · doi:10.1002/14356007 · Cited by 3,811
Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete
Turner, L. K., & Collins, F. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.01.023 · Cited by 2,468
Provis, J. L. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.009 · Cited by 2,272
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
Lea's Chemistry of Cement and Concrete
(2019) · Elsevier eBooks · doi:10.1016/c2013-0-19325-7 · Cited by 1,938
Duxson, P., Provis, J. L., Lukey, G. C., Mallicoat, S., Kriven, W. M., & van Deventer, J. S. J. (2005) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2005.06.060 · Cited by 1,812
New cements for the 21st century: The pursuit of an alternative to Portland cement
Shi, C., Jiménez, A. F., & Palomo, A. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.016 · Cited by 1,691
Research works printed but not linked: 7
- H. Kühl, Slag cement and process making the same, US Patent 900,939 (1908).
- Purdon, 1940, The action of alkalis on blast-furnace slag, J. Soc. Chem. Ind., 59, 191
- R.F. Heitzmann, M. Fitzgerald, J.L. Sawyer, Mineral binder and compositions employing the same, Mineral binder and compositions employing the same. US Patent 4,642,137 (1987).
- W. Schwarz, A. Lerat, Tectoaluminosilicate cement and a process for its manufacture, Tectoaluminosilicate cement and a process for its manufacture. U.S. Patent 5,372,640 (1994).
- J. Davidovits, Method for obtaining a geopolymeric binder allowing to stabilize, solidify and consolidate toxic or waste materials, Method for obtaining a geopolymeric binder allowing to stabilize, solidify and consolidate toxic or waste materials. U.S. Patent 5,349,118 (1994).
- García-Lodeiro, 2012, Hybrid alkaline cements. Part I: Fundamentals, Rev. Rom. Mater. Rom. J. Mater., 42, 330
- Gluth, 2013, Geopolymerization of a silica residue from waste treatment of chlorosilane production, Mater. Struct., 46, 1291, 10.1617/s11527-012-9972-5 · DOI
Cited by
Sorted by citations
Items 101–200 of 1,000
Effect of superplasticizers on properties of one-part Ca(OH)2/Na2SO4 activated geopolymer pastes
Alrefaei, Y., Wang, Y., Dai, J.-G., & Xu, Q. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117990 · Cited by 112
Guo, W., Wang, S., Xu, Z., Zhang, Z., Zhang, C., Bai, Y., & Zhao, Q. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124403 · Cited by 108
Experimental comparisons between one-part and normal (two-part) alkali-activated slag binders
Ren, J., Sun, H., Li, Q., Li, Z., Ling, L., Zhang, X., Wang, Y., & Xing, F. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.125177 · Cited by 108
Lemougna, P. N., Nzeukou, A. N., Aziwo, B. T., Tchamba, A. B., Wang, K.-T., Melo, U. C., & Cui, X. (2019) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2019.122077 · Cited by 107
Zhao, Y., Qiu, J., Zhang, S., Guo, Z., Ma, Z., Sun, X., & Xing, J. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118603 · Cited by 107
Alternative alkali-activator from steel-making waste for one-part alkali-activated slag
Adesanya, E., Ohenoja, K., Maria, A. D., Kinnunen, P., & Illikainen, M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.123020 · Cited by 107
Geopolymerization mechanism of binder-free mine tailings by sodium silicate
Koohestani, B., Mokhtari, P., Yilmaz, E., Mahdipour, F., & Darban, A. K. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121217 · Cited by 107
Evaluation of environmental sustainability of one-part geopolymer binder concrete
Neupane, K. (2022) · Cleaner Materials · doi:10.1016/j.clema.2022.100138 · Cited by 107
Manchisi, J., Matinde, E., Rowson, N. A., Simmons, M. J. H., Simate, G. S., Ndlovu, S., & Mwewa, B. (2020) · Sustainability · doi:10.3390/su12052118 · Cited by 110
Mechanochemically activated bottom ash-fly ash geopolymer
Hosseini, S., Brake, N. A., Nikookar, M., Günaydın-Şen, Ö., & Snyder, H. A. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.103976 · Cited by 104
Peng, Y., & Unluer, C. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.110492 · Cited by 107
Application of bacterial nanocellulose fibers as reinforcement in cement composites
Akhlaghi, M. A., Bagherpour, R., & Kalhori, H. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118061 · Cited by 102
Durability of the Reinforced One-Part Alkali-Activated Slag Mortars with Different Fibers
Abdollahnejad, Z., Mastali, M., Falah, M., Shaad, K. M., Luukkοnen, T., & Illikainen, M. (2020) · Waste and Biomass Valorization · doi:10.1007/s12649-020-00958-x · Cited by 102
Chen, Q., Tao, Y., Feng, Y. P., Zhang, Q., & Liu, Y. (2021) · Journal of Environmental Management · doi:10.1016/j.jenvman.2021.112608 · Cited by 102
Fiber-reinforced one-part alkali-activated slag/ceramic binders
Abdollahnejad, Z., Mastali, M., Luukkοnen, T., Kinnunen, P., & Illikainen, M. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.02.097 · Cited by 101
Meshram, R. B., & Kumar, S. (2021) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-021-03336-9 · Cited by 101
Engineering properties of crumb rubber alkali-activated mortar reinforced with recycled steel fibres
Zhong, H., Poon, E. W., Chen, K., & Zhang, M. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.117950 · Cited by 99
Sun, Y., Cheng, H., Zhang, S., Mohan, M. K., Ye, G., & Schutter, G. D. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.131519 · Cited by 102
Suitability of commercial superplasticizers for one-part alkali-activated blast-furnace slag mortar
Luukkοnen, T., Abdollahnejad, Z., Ohenoja, K., Kinnunen, P., & Illikainen, M. (2019) · Journal of Sustainable Cement-Based Materials · doi:10.1080/21650373.2019.1625827 · Cited by 98
Drying shrinkage of one-part alkali-activated slag concrete
Sadeghian, G., Behfarnia, K., & Teymouri, M. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.104263 · Cited by 98
Kadhim, A., Sadique, M., Al-Mufti, R. L., & Hashim, K. (2020) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.101766 · Cited by 97
Geopolymer additive manufacturing: A review
Лазоренко, Г. И., & Kasprzhitskii, A. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102782 · Cited by 96
Yang, T., Zhang, Z., Zhang, F., Gao, Y., & Wu, Q. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120047 · Cited by 95
Minimizing energy consumption to produce safe one-part alkali-activated materials
Refaat, M., Mohsen, A., Nasr, E.-S. A. R., & Kohail, M. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.129137 · Cited by 94
Al-Noaimat, Y. A., Ghaffar, S. H., Chougan, M., & Al‐Kheetan, M. J. (2022) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2022.e01818 · Cited by 95
Rajan, H. S., & Kathirvel, P. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124959 · Cited by 92
Life cycle assessment of alkali-activated materials: a systematic literature review
Nikravan, M., Firdous, R., & Stephan, D. (2023) · Low-carbon Materials and Green Construction · doi:10.1007/s44242-023-00014-6 · Cited by 93
Fabrication and characterization of thermally-insulating coconut ash-based geopolymer foam
Hassan, H. S., Abdel‐Gawwad, H. A., Vásquez-García, S. R., & Israde-Alcántara, I. (2018) · Waste Management · doi:10.1016/j.wasman.2018.09.022 · Cited by 90
How environmentally sustainable are fibre reinforced alkali-activated concretes?
Abdulkareem, M., Havukainen, J., & Horttanainen, M. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.07.076 · Cited by 90
Rheology behavior of one-part alkali activated slag/glass powder (AASG) pastes
Li, L., Lu, J., Zhang, B., & Poon, C. S. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120381 · Cited by 90
Preparation and Reaction Mechanism Characterization of Alkali-activated Coal Gangue–Slag Materials
Ma, H., Zhu, H., Yi, C., Fan, J., Chen, H., Xu, X., & Wang, T. (2019) · Materials · doi:10.3390/ma12142250 · Cited by 91
Shah, S. F. A., Chen, B., Zahid, M., & Ahmad, M. R. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129534 · Cited by 95
Comprehensive Analysis of Geopolymer Materials: Properties, Environmental Impacts, and Applications
Sbahieh, S., McKay, G., & Al‐Ghamdi, S. G. (2023) · Materials · doi:10.3390/ma16237363 · Cited by 89
Bong, S. H., Nematollahi, B., Nazari, A., Xia, M., & Sanjayan, J. (2019) · Materials · doi:10.3390/ma12203410 · Cited by 88
Pasupathy, K., Cheema, D. S., & Sanjayan, J. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122596 · Cited by 88
A review on developments of environmentally friendly geopolymer technology
Krishna, R. S., Mishra, J., Zribi, M., Adeniyi, F. I., Saha, S., Baklouti, S., Shaikh, F. U. A., & Gökçe, H. S. (2021) · Materialia · doi:10.1016/j.mtla.2021.101212 · Cited by 90
High strength/density ratio in a syntactic foam made from one-part mix geopolymer and cenospheres
Hajimohammadi, A., Ngo, T., Provis, J. L., Kim, T., & Vongsvivut, J. P. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.106908 · Cited by 87
Huang, G., Yang, K., Sun, Y., Lu, Z., Zhang, X., Zuo, L., Feng, Y., Qian, R., Qi, Y., Ji, Y., et al. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118582 · Cited by 87
Analytical Review of Geopolymer Concrete: Retrospective and Current Issues
Meskhi, B. C., Beskopylny, A. N., Stel’makh, S. A., Shcherban’, E. M., Маилян, Л. Р., Shilov, A. A., El'shaeva, D. M., Shilova, K., Karalar, M., Aksoylu, C., et al. (2023) · Materials · doi:10.3390/ma16103792 · Cited by 87
Study of seawater mixed one-part alkali activated GGBFS-fly ash
Lv, W., Sun, Z., & Su, Z. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.103484 · Cited by 86
Guo, W., Zhang, Z., Zhao, Q., Song, R., & Liu, J. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121301 · Cited by 86
Roles of hybrid activators in improving the early-age properties of one-part geopolymer pastes
Wang, Y., Alrefaei, Y., & Dai, J. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124880 · Cited by 86
Guo, S., Ma, C., Long, G., & Xie, Y. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.02.116 · Cited by 85
Preparation of one‐part geopolymeric precursors using vanadium tailing by thermal activation
Luo, Y., Bao, S., & Zhang, Y. (2019) · Journal of the American Ceramic Society · doi:10.1111/jace.16835 · Cited by 85
Effect of using plastic waste on mechanical properties of fly ash based geopolymer concrete
Haq, M. Z. U., Sood, H., & Kumar, R. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.08.233 · Cited by 85
Alkali activation of electric arc furnace slag: Mechanical properties and micro analyzes
Öztürk, M., Bankır, M. B., Bölükbaşı, Ö. S., & Sevim, U. K. (2018) · Journal of Building Engineering · doi:10.1016/j.jobe.2018.10.005 · Cited by 84
Zamanabadi, S. N., Zareei, S. A., Shoaei, P., & Ameri, F. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.116911 · Cited by 84
RetractedBurciaga-Díaz, O., Durón-Sifuentes, M., Díaz-Guillén, J. A., & Escalante-Garcia, J. I. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.103492 · Cited by 84
Zhang, B., Zhu, H., Li, F., Dong, Z., & Zhang, P. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.123886 · Cited by 84
Mills, J. N., Katzarova, M., & Wagner, N. J. (2022) · Advances in Space Research · doi:10.1016/j.asr.2021.10.045 · Cited by 83
Waste Upcycling in Construction: Geopolymer Bricks at the Vanguard of Polymer Waste Renaissance
Haq, M. Z. U., Sood, H., Kumar, R., Chaudhary, P., Lavanya, C., Dhaliwal, N. K., Singarapu, S., & Kumar, K. (2023) · E3S Web of Conferences · doi:10.1051/e3sconf/202343001205 · Cited by 83
Properties and microstructure of lithium-slag-based geopolymer by one-part mixing method
Luo, Q., Wang, Y., Hong, S., Xing, F., & Dong, B. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121723 · Cited by 81
Utilisation of Waste-Based Geopolymer in Asphalt Pavement Modification and Construction—A Review
Milad, A. A., Ali, A. S. B., Babalghaith, A. M., Memon, Z. A., Mashaan, N. S., Arafa, S., & Yusoff, N. I. M. (2021) · Sustainability · doi:10.3390/su13063330 · Cited by 81
Recycling of quarry dust for supplementary cementitious materials in low carbon cement
Zhao, Y., Qiu, J., Xing, J., & Sun, X. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117608 · Cited by 81
Haruna, S., Mohammed, B. S., Wahab, M. M. A., & Liew, M. S. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120024 · Cited by 80
Yang, D., Liu, M., Zhang, Z., Yao, P., & Ma, Z. (2021) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2021.e00826 · Cited by 80
Shilar, F. A., Ganachari, S. V., Patil, V. B., Khan, T. M. Y., Almakayeel, N. M., & Alghamdi, S. Y. (2022) · Polymers · doi:10.3390/polym14071421 · Cited by 80
Chukwuemeka, A. O., Oluyemi, G. F., Mohammed, A. I., & Njuguna, J. (2023) · Geoenergy Science and Engineering · doi:10.1016/j.geoen.2023.211718 · Cited by 80
Low-carbon cementitious materials: Scale-up potential, environmental impact and barriers
Ahmad, M. R., Fernández‐Jiménez, A., Chen, B., Leng, Z., & Dai, J. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.139087 · Cited by 80
Nguyen, K. T., Lê, A. T., & Lee, K. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.02.169 · Cited by 79
Zhang, B., Yuan, P., Guo, H., Deng, L., Li, Y., Li, L., Wang, Q., & Liu, D. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121186 · Cited by 78
Alrefaei, Y., Wang, Y., & Dai, J. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103917 · Cited by 80
Carvalho, R. N. L., Silva, R. V., de Brito, J., & Pereira, M. F. C. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.125930 · Cited by 78
Xie, J., Zhao, J., Wang, J., Fang, C., Yuan, B., & Wu, Y. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.127359 · Cited by 78
Determination of the fracture parameters of steel fiber-reinforced geopolymer concrete
Gomes, R. F., Dias, D. P., & Silva, F. D. A. (2020) · Theoretical and Applied Fracture Mechanics · doi:10.1016/j.tafmec.2020.102568 · Cited by 77
Eco-friendly agro-waste based geopolymer-concrete: a systematic review
Alaneme, G. U., Olonade, K. A., & Esenogho, E. (2023) · Discover Materials · doi:10.1007/s43939-023-00052-8 · Cited by 78
Falah, M., Obenaus-Emler, R., Kinnunen, P., & Illikainen, M. (2019) · Waste and Biomass Valorization · doi:10.1007/s12649-019-00781-z · Cited by 76
Volcanic Ash as a Sustainable Binder Material: An Extensive Review
Játiva, A., Ruales, E., & Etxeberria, M. (2021) · Materials · doi:10.3390/ma14051302 · Cited by 76
Gómez-Casero, M. Á., Pérez‐Villarejo, L., Castro, E., & Eliche‐Quesada, D. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124205 · Cited by 76
Ponomar, V., Yliniemi, J., Adesanya, E., Ohenoja, K., & Illikainen, M. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.129900 · Cited by 76
Optimization of Alkaline Activator on the Strength Properties of Geopolymer Concrete
Shilar, F. A., Ganachari, S. V., Patil, V. B., Khan, T. M. Y., Javed, S., & Baig, R. U. (2022) · Polymers · doi:10.3390/polym14122434 · Cited by 76
Comparison of One-Part and Two-Part Alkali-Activated Metakaolin and Blast Furnace Slag
Segura, I. P., Luukkοnen, T., Yliniemi, J., Sreenivasan, H., Damø, A. J., Jensen, L. S., Canut, M. M. C., Kantola, A. M., Telkki, V., & Jensen, P. A. (2022) · Journal of Sustainable Metallurgy · doi:10.1007/s40831-022-00606-9 · Cited by 76
Waste Mineral Wool and Its Opportunities—A Review
Yap, Z. S., Khalid, N. H. A., Haron, Z., Mohamed, A., Tahir, M. M., Hasyim, S., & Saggaff, A. (2021) · Materials · doi:10.3390/ma14195777 · Cited by 80
Li, H., Liebscher, M., Yang, J., Davoodabadi, M., Li, L., Du, Y., Yang, B., Hempel, S., & Mechtcherine, V. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.133093 · Cited by 75
Svobodova‐Sedlackova, A., Calderón, A., Fernández, A. I., Chimenos, J. M., Berlanga, C., Yücel, O., Barreneche, C., & Rodríguez, R. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e24943 · Cited by 74
Zaland, S., Wang, J., Li, K., Sadat, S. I., & Akhunzada, K. (2025) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2025.116157 · Cited by 74
Ultra high performance and high strength geopolymer concrete
Nodehi, M., & Aguayo, F. M. (2021) · Journal of Building Pathology and Rehabilitation · doi:10.1007/s41024-021-00130-5 · Cited by 73
Huang, G., Ji, Y., Li, J., Zhang, L., Liu, X., & Liu, B. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.12.125 · Cited by 72
Abdollahnejad, Z., Luukkοnen, T., Mastali, M., Giosué, C., Favoni, O., Ruello, M. L., Kinnunen, P., & Illikainen, M. (2019) · Waste and Biomass Valorization · doi:10.1007/s12649-019-00626-9 · Cited by 72
Kang, X., Gan, Y., Chen, R., & Zhang, C. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122337 · Cited by 72
Lyu, B.-C., Ding, C., Guo, L., Chen, B., & Wang, A. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.123030 · Cited by 72
Long-Term Strength Development of Fly Ash-Based One-Part Alkali-Activated Binders
Haruna, S., Mohammed, B. S., Wahab, M. M. A., Kankia, M. U., Amran, M., & Gora, A. M. (2021) · Materials · doi:10.3390/ma14154160 · Cited by 72
Yılmazoglu, M. U., Kara, H. O., Benli, A., Demirkıran, A. R., Bayraktar, O. Y., & Kaplan, G. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.140160 · Cited by 72
Liu, Q., Li, X., Chuanming, L., Junxiang, W., & Xianjun, L. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129013 · Cited by 71
Marandi, N., & Shirzad, S. (2025) · Innovative Infrastructure Solutions · doi:10.1007/s41062-025-02213-5 · Cited by 98
Marathe, S., Mithanthaya, I. R., & Shenoy, R. Y. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.123047 · Cited by 70
Preparation and properties of rubberised geopolymer concrete: A review
El-Zeadani, M., Bompa, D. V., & Elghazouli, A. Y. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.125504 · Cited by 70
Liu, Q., Cui, M., Li, X., Wang, J., Wang, Z., Li, L., & Lyu, X. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.06.318 · Cited by 70
Nassar, A. K., & Kathirvel, P. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129681 · Cited by 70
Sedaghatdoost, A., Behfarnia, K., Bayati, M., & Vaezi, M. S. (2019) · Journal of Building Engineering · doi:10.1016/j.jobe.2019.100871 · Cited by 69
Synthesis of kaolin-based alkali-activated cement: carbon footprint, cost and energy assessment
Ababneh, A. N., Matalkah, F., & Aqel, R. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.05.116 · Cited by 69
Samarakoon, M. H., Ranjith, P. G., Duan, W., Haque, A., & Chen, B. K. (2021) · Waste Management · doi:10.1016/j.wasman.2021.04.060 · Cited by 69
High strength one-part alkali-activated slag blends designed by particle packing optimization
Perumal, P., Sreenivasan, H., Luukkοnen, T., Kantola, A. M., Telkki, V., Kinnunen, P., & Illikainen, M. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124004 · Cited by 69
Migunthanna, J., Rajeev, P., & Sanjayan, J. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124787 · Cited by 69
Dişçi, E., & Polat, R. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.128484 · Cited by 69
The Durability of One-Part Alkali-Activated Slag-Based Mortars in Different Environments
Coppola, L., Coffetti, D., Crotti, E., Gazzaniga, G., & Pastore, T. (2020) · Sustainability · doi:10.3390/su12093561 · Cited by 68
Vafaei, M., Allahverdi, A., Dong, P., Bassim, N., & Mahinroosta, M. (2020) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.102066 · Cited by 68
Liu, Q., Shaokang, S., Jia, Z., Junxiang, W., & Xianjun, L. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124931 · Cited by 67
Wang, W., Wang, B., & Zhang, S. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.114215 · Cited by 67
Chemical Stability and Leaching Behavior of One-Part Geopolymer from Soil and Coal Fly Ash Mixtures
Tigue, A. A. S., Malenab, R. A. J., Dungca, J. R., Yu, D. E. C., & Promentilla, M. A. B. (2018) · Minerals · doi:10.3390/min8090411 · Cited by 67
Metadata
- Authors
- Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M.
- Affiliations
- University of Oulu (FI)
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2018-01
- Volume
- 103
- Pages
- 21-34
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2768077267
- Cited by
- 1,456
- References
- 191
- Citations by year
- 2026: 223 · 2025: 201 · 2024: 212 · 2023: 203 · 2022: 216 · 2021: 159 · 2020: 121 · 2019: 87 · 2018: 32
- FWCI
- 17.47
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Cement and Concrete Research (publishedVersion, cc-by-nc-nd)
- Funders
- Tekes (1105/31/2016)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Concrete and Cement Materials Research
- Physical Sciences › Materials Science › Materials Chemistry › Magnesium Oxide Properties and Applications
- Physical Sciences › Environmental Science › Environmental Engineering › Microbial Applications in Construction Materials
- Keywords
- alkali-activated materials, aluminosilicate precursors, alkaline activator, dry mix, CO2 emission reduction, waste valorization, curing mechanism, hydration products, mechanical properties, environmental impact
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
