The DOI matches its Crossref record; 89 of the 89 references it cites were found in a registry or an index.
Effect of slag content and activator dosage on the resistance of fly ash geopolymer binders to sulfuric acid attack
Open accessAbstract
Abstract Geopolymer (GP) binders are an appealing alternative to Portland cement (PC) binders as they have the potential to reduce the CO2 emissions associated with the cement and concrete industry. However, their durability in aggressive environments needs thorough examination if they are to become a viable alternative to traditional PC materials. This study investigated the effect of increasing slag content and activator dosage on the sulfuric acid resistance of fly ash GP binders. Their performance was also compared with that of neat PC mixes using various physical and microstructural techniques. The results show that increasing the slag content of fly ash GPs decreases porosity, but makes the reaction products more susceptible to sulfuric acid attack. It was also found that increasing the alkaline activator dosage of fly ash GPs has little impact on sulfuric acid resistance. Finally, GP binders displayed superior sulfuric acid resistance than their PC counterparts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Supplementary cementitious materials
Lothenbach, B., Scrivener, K., & Hooton, R. D. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.12.001 · Cited by 3,406
The Infrared Spectra of Minerals
(1974) · Mineralogical Society of Great Britain and Ireland eBooks · doi:10.1180/mono-4 · Cited by 3,086
The role of inorganic polymer technology in the development of ‘green concrete’
Duxson, P., Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.08.018 · Cited by 1,998
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
Influence of limestone on the hydration of Portland cements
Lothenbach, B., Le Saout, G., Gallucci, E., & Scrivener, K. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2008.01.002 · Cited by 1,699
Global CO 2 emissions from cement production
Andrew, R. M. (2018) · Earth System Science Data · doi:10.5194/essd-10-195-2018 · Cited by 1,583
Metakaolin and calcined clays as pozzolans for concrete: a review
Sabir, B. B., Wild, S., & Bai, J. (2001) · Cement and Concrete Composites · doi:10.1016/s0958-9465(00)00092-5 · Cited by 1,465
Habert, G., d’Espinose de Lacaillerie, J. B., & Roussel, N. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.03.012 · Cited by 1,407
Garcia-Lodeiro, I., Palomo, A., Fernández-Jiménez, A., & Macphee, D. E. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.05.006 · Cited by 1,366
Ismail, I., Bernal, S. A., Provis, J. L., San Nicolas, R., Hamdan, S., & van Deventer, J. S. J. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2013.09.006 · Cited by 1,317
Resistance of geopolymer materials to acid attack
Bakharev, T. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.06.005 · Cited by 1,109
The use of thermal analysis in assessing the effect of temperature on a cement paste
Alarcon-Ruiz, L., Platret, G., Massieu, E., & Ehrlacher, A. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.06.015 · Cited by 1,074
Ben Haha, M., Le Saout, G., Winnefeld, F., & Lothenbach, B. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.016 · Cited by 1,059
Bernal, S. A., Provis, J. L., Walkley, B., San Nicolas, R., Gehman, J. D., Brice, D. G., Kilcullen, A. R., Duxson, P., & van Deventer, J. S. J. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.06.007 · Cited by 1,019 · cited 2×
“The broad hump in the GP mixes between approximately 20 and 35° 2θ indicates the presence of amorphous silicate and aluminosilicate gel phases [60], [61].”
BackgroundThe infrared spectra of minerals
Newnham, R. E. (1975) · Materials Research Bulletin · doi:10.1016/0025-5408(75)90164-6 · Cited by 999
Hydration products of alkali activated slag cement
Wang, S.-D., & Scrivener, K. L. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00045-e · Cited by 997
Deb, P. S., Nath, P., & Sarker, P. K. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.05.001 · Cited by 941
Alkali-activated fly ash/slag cements
Puertas, F., Martı́nez-Ramı́rez, S., Alonso, S., & Vázquez, T. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00298-2 · Cited by 921
Haha, M. B., Lothenbach, B., Le Saout, G., & Winnefeld, F. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.05.002 · Cited by 914
Alkali Activated Materials: State-of-the-Art Report, RILEM TC 224-AAM
(2014) · RILEM State-of-the-Art Reports · doi:10.1007/978-94-007-7672-2 · Cited by 906
A model for the C-A-S-H gel formed in alkali-activated slag cements
Puertas, F., Palacios, M., Manzano, H., Dolado, J. S., Rico, A., & Rodríguez, J. (2011) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2011.04.036 · Cited by 898
The AFm phase in Portland cement
Matschei, T., Lothenbach, B., & Glasser, F. P. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2006.10.010 · Cited by 887
Geopolymer foam concrete: An emerging material for sustainable construction
Zhang, Z., Provis, J. L., Reid, A., & Wang, H. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.01.081 · Cited by 879
Effect of alkalis on fresh C–S–H gels. FTIR analysis
García Lodeiro, I., Macphee, D. E., Palomo, A., & Fernández-Jiménez, A. (2009) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.01.003 · Cited by 827
Alkali activation of fly ash: Effect of the SiO2/Na2O ratio
Criado, M., Fernández-Jiménez, A., & Palomo, A. (2007) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.02.055 · Cited by 705
FTIR study of the sol–gel synthesis of cementitious gels: C–S–H and N–A–S–H
García-Lodeiro, I., Fernández-Jiménez, A., Blanco, M. T., & Palomo, A. (2008) · Journal of Sol-Gel Science and Technology · doi:10.1007/s10971-007-1643-6 · Cited by 642
Mid-infrared spectroscopic studies of alkali-activated fly ash structure
Fernández-Jiménez, A., & Palomo, A. (2005) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.05.057 · Cited by 625
Chemical stability of cementitious materials based on metakaolin
Palomo, A., Blanco-Varela, M. T., Granizo, M. L., Puertas, F., Vazquez, T., & Grutzeck, M. W. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00074-5 · Cited by 608
The experimental investigation of concrete carbonation depth
Chang, C.-F., & Chen, J.-W. (2006) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.07.025 · Cited by 597
Haha, M. B., Lothenbach, B., Le Saout, G., & Winnefeld, F. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.08.005 · Cited by 580
X-ray microtomography shows pore structure and tortuosity in alkali-activated binders
Provis, J. L., Myers, R. J., White, C. E., Rose, V., & van Deventer, J. S. J. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2012.03.004 · Cited by 572
Walkley, B., San Nicolas, R., Sani, M.-A., Rees, G. J., Hanna, J. V., van Deventer, J. S. J., & Provis, J. L. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.08.010 · Cited by 544
Bernal, S. A., San Nicolas, R., Myers, R. J., Mejía de Gutiérrez, R., Puertas, F., van Deventer, J. S. J., & Provis, J. L. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.12.003 · Cited by 493
Influence of limestone and anhydrite on the hydration of Portland cements
Zajac, M., Rossberg, A., Le Saout, G., & Lothenbach, B. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2013.11.007 · Cited by 489
Sulfuric acid resistance of blended ash geopolymer concrete
Ariffin, M. A. M., Bhutta, M. A. R., Hussin, M. W., Mohd Tahir, M., & Aziah, N. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.01.018 · Cited by 488
Fernández‐Jiménez, A., Puertas, F., Sobrados, I., & Sanz, J. (2003) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2003.tb03481.x · Cited by 481
Thermal stability and decomposition mechanisms of ettringite at <120°C
Zhou, Q., & Glasser, F. P. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00558-0 · Cited by 475
Shrinkage characteristics of alkali-activated fly ash/slag paste and mortar at early ages
Lee, N. K., Jang, J. G., & Lee, H. K. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.07.007 · Cited by 462
Gao, X., Yu, Q., & Brouwers, H. J. H. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.01.065 · Cited by 458
Mineralogical and microstructural characterisation of alkali-activated fly ash/slag pastes
Puertas, F., & Fernández-Jiménez, A. (2003) · Cement and Concrete Composites · doi:10.1016/s0958-9465(02)00059-8 · Cited by 452
Hydration states of AFm cement phases
Baquerizo, L. G., Matschei, T., Scrivener, K. L., Saeidpour, M., & Wadsö, L. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.02.011 · Cited by 431
Factors influencing the compressive strength of fly ash based geopolymers
Soutsos, M. N., Boyle, A. P., Vinai, R., Hadjierakleous, A., & Barnett, S. J. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.11.045 · Cited by 326
Self-citationAlkali-activated metakaolin: A short guide for civil Engineer – An overview
Rashad, A. M. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.12.030 · Cited by 313
Acid corrosion resistance of different cementing materials
Shi, C., & Stegemann, J. A. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00234-9 · Cited by 290
Reactivity and reaction products of alkali-activated, fly ash/slag paste
Lee, N. K., & Lee, H. K. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.02.022 · Cited by 284
The effect of silica availability on the mechanism of geopolymerisation
Hajimohammadi, A., Provis, J. L., & van Deventer, J. S. J. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.02.001 · Cited by 279
Performance of Cement-Based Materials in Aggressive Aqueous Environments
Alexander, M. G., Bertron, A., & Belie, N. D. (2012) · RILEM state-of-the-art reports · doi:10.1007/978-94-007-5413-3 · Cited by 273
Bragg, W. L., & Bragg, W. L. (1925) · International Linear Collider · Cited by 270
Effect of the leaching of calcium hydroxide from cement paste on mechanical and physical properties
Carde, C., & François, R. (1997) · Cement and Concrete Research · doi:10.1016/s0008-8846(97)00042-2 · Cited by 269
Biochemical attack on concrete in wastewater applications: A state of the art review
O’Connell, M., McNally, C., & Richardson, M. G. (2010) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2010.05.001 · Cited by 265
Guidelines for mix proportioning of fly ash/GGBS based alkali activated concretes
Rafeet, A., Vinai, R., Soutsos, M., & Sha, W. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.036 · Cited by 258
Self-citationSolubility of ettringite (Ca6[Al(OH)6]2(SO4)3 · 26H2O) at 5–75°C
Perkins, R. B., & Palmer, C. D. (1999) · Geochimica et Cosmochimica Acta · doi:10.1016/s0016-7037(99)00078-2 · Cited by 251
Acid attack on hydrated cement — Effect of mineral acids on the degradation process
Gutberlet, T., Hilbig, H., & Beddoe, R. E. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.03.011 · Cited by 223
Fe-containing phases in hydrated cements
Dilnesa, B. Z., Wieland, E., Lothenbach, B., Dähn, R., & Scrivener, K. L. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.12.012 · Cited by 221
Drying-induced changes in the structure of alkali-activated pastes
Ismail, I., Bernal, S. A., Provis, J. L., Hamdan, S., & van Deventer, J. S. J. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7152-9 · Cited by 210
Jiang, M., Chen, X., Rajabipour, F., & Hendrickson, C. T. (2014) · Journal of Infrastructure Systems · doi:10.1061/(asce)is.1943-555x.0000211 · Cited by 203
New Cementitious Materials Based on Alkali‐Activated Fly Ash: Performance at High Temperatures
Fernández‐Jiménez, A., Palomo, A., Pastor, J. Y., & Martín, A. (2008) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2008.02625.x · Cited by 199
Response of Concrete to Sulfuric Acid Attack
(1988) · ACI Materials Journal · doi:10.14359/2210 · Cited by 188
Interpretation of infrared spectra
Duffy, N. V. (1972) · Journal of Chemical Education · doi:10.1021/ed049p652.1 · Cited by 184
Performance of alkali-activated slag mortars exposed to acids
Bernal, S. A., Rodríguez, E. D., Mejía de Gutiérrez, R., & Provis, J. L. (2012) · Journal of Sustainable Cement-Based Materials · doi:10.1080/21650373.2012.747235 · Cited by 173
Microscopy and microanalysis of inorganic polymer cements. 1: remnant fly ash particles
Lloyd, R. R., Provis, J. L., & van Deventer, J. S. J. (2009) · Journal of Materials Science · doi:10.1007/s10853-008-3077-0 · Cited by 170
Xie, S., Qi, L., & Zhou, D. (2004) · Atmospheric Environment · doi:10.1016/j.atmosenv.2004.05.017 · Cited by 168
Iron in carbonate containing AFm phases
Dilnesa, B. Z., Lothenbach, B., Le Saout, G., Renaudin, G., Mesbah, A., Filinchuk, Y., Wichser, A., & Wieland, E. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.017 · Cited by 164
Metaettringite, a decomposition product of ettringite
Zhou, Q., Lachowski, E. E., & Glasser, F. P. (2003) · Cement and Concrete Research · doi:10.1016/j.cemconres.2003.10.027 · Cited by 157
Sulfate and acid resistance of lithomarge-based geopolymer mortars
Kwasny, J., Aiken, T. A., Soutsos, M. N., McIntosh, J. A., & Cleland, D. J. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.01.129 · Cited by 156
Self-citationModelling the loss of strength and porosity increase due to the leaching of cement pastes
Carde, C., & François, R. (1999) · Cement and Concrete Composites · doi:10.1016/s0958-9465(98)00046-8 · Cited by 148
Resistance of geopolymer and Portland cement based systems to silage effluent attack
Aiken, T. A., Sha, W., Kwasny, J., & Soutsos, M. N. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.11.015 · Cited by 148
Self-citationAllahverdi, A., & Škvára, F. (2005) · Cited by 139
Thermal decomposition of ettringite Ca 6 [Al(OH) 6 ] 2 (SO 4 ) 3 ·26H 2 O
Hall, C., Barnes, P. W., Billimore, A. D., Jupe, A. C., & Turrillas, X. (1996) · Journal of the Chemical Society Faraday Transactions · doi:10.1039/ft9969202125 · Cited by 120
Carbonation in a 36 year old, in-situ concrete
Parrott, L. J., & Killoh, D. C. (1989) · Cement and Concrete Research · doi:10.1016/0008-8846(89)90017-3 · Cited by 118
Making of anhydrite cement from waste gypsum
Singh, M., & Garg, M. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00209-x · Cited by 118
Thermal analysis and microstructure of Portland cement-fly ash-silica fume pastes
Chaipanich, A., & Nochaiya, T. (2009) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-009-0403-y · Cited by 108
In situ IR spectroscopic and thermogravimetric study of the dehydration of gypsum
Putnis, A., Winkler, B., & Fernández-Díaz, L. (1990) · Mineralogical Magazine · doi:10.1180/minmag.1990.054.374.14 · Cited by 98
The thermal dehydration of synthetic gypsum
Strydom, C. A., Hudson-Lamb, D. L., Potgieter, J. H., et al. (1995) · Thermochimica Acta · doi:10.1016/0040-6031(95)02521-9 · Cited by 87
Chi, M. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.09.029 · Cited by 84
Baščarević, Z., Komljenović, M. M., Miladinović, Z. P., et al. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.12.067 · Cited by 81
Indicator of carbonation front in concrete as substitute to phenolphthalein
Chinchón-Payá, S., Andrade, C., & Yepes, S. C. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.12.010 · Cited by 81
Alkali Ash Material: A Novel Fly Ash-Based Cement
Rostami, H., & Brendley, W. H. (2003) · Environmental Science & Technology · doi:10.1021/es026317b · Cited by 80
Kovtun, M., Ziolkowski, M., Shekhovtsova, J., & Kearsley, E. P. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.05.098 · Cited by 76
Cheah, C. B., Chung, K. Y., Ramli, M. B., & Lim, G. K. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.06.105 · Cited by 76
Alkali-activation potential of biomass-coal co-fired fly ash
Shearer, C. R., Provis, J. L., Bernal, S. A., & Kurtis, K. E. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.06.014 · Cited by 75
Decalcification resistance of alkali-activated slag
Komljenović, M. M., Baščarević, Z., Marjanović, N., & Nikolić, V. (2012) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2012.06.063 · Cited by 72
Durability test methods and their application to AAMs: case of sulfuric-acid resistance
Aliques-Granero, J., Tognonvi, M. T., & Tagnit‐Hamou, A. (2016) · Materials and Structures · doi:10.1617/s11527-016-0904-7 · Cited by 60
Nochaiya, T., Wongkeo, W., Pimraksa, K., & Chaipanich, A. (2009) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-009-0491-8 · Cited by 56
RESISTANCE OF FLY ASH BASED GEOPOLYMER MORTARS IN SULFURIC ACID
Thokchom, S., Ghosh, P., & Ghosh, S. (2009) · Cited by 54
Decalcification of alkali-activated slag pastes. Effect of the chemical composition of the slag
Varga, C., Alonso, M. M., de Gutiérrez, R. M., Arcila, J. M. M., & Puertas, F. (2014) · Materials and Structures · doi:10.1617/s11527-014-0422-4 · Cited by 47
Kwasny, J., Soutsos, M. N., McIntosh, J. A., & Cleland, D. J. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.07.165 · Cited by 36
Self-citationYue, C., Li, S., Ding, K., & Zhong, N. (2006) · GEOCHEMICAL JOURNAL · doi:10.2343/geochemj.40.87 · Cited by 34
Acid resistance of calcium aluminate cement–fly ash F blends
Pyatina, T., & Sugama, T. (2016) · Advances in Cement Research · doi:10.1680/jadcr.15.00139 · Cited by 31
Cited by
Recent progress in low-carbon binders
Shi, C., Qu, B., & Provis, J. L. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.009 · Cited by 714
Amran, M., Debbarma, S., & Ozbakkaloglu, T. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121857 · Cited by 532
Advances in geopolymer materials: A comprehensive review
Cong, P., & Cheng, Y. (2021) · Journal of Traffic and Transportation Engineering (English Edition) · doi:10.1016/j.jtte.2021.03.004 · Cited by 481
Geopolymer concrete as sustainable material: A state of the art review
Farooq, F., Jin, X., Faisal Javed, M., Akbar, A., Izhar Shah, M., Aslam, F., & Alyousef, R. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124762 · Cited by 344
Qureshi, L. A., Ali, B., & Ali, A. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120636 · Cited by 309
Metadata
- Authors
- Aiken, T. A., Kwasny, J., Sha, W., & Soutsos, M. N.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 111
- Pages
- 23-40
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2810791969
- Cited by
- 338
- References
- 89
- FWCI
- 17.96
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.