The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Extrusion-based additive manufacturing with cement-based materials – Production steps, processes, and their underlying physics: A review
Open accessAbstract
This article offers a comprehensive overview of the underlying physics relevant to an understanding of materials processing during the various production steps in extrusion-based 3D concrete printing (3DCP). Understanding the physics governing the processes is an important step towards the purposeful design and optimization of 3DCP systems as well as their efficient and robust process control. For some processes, analytical formulas based on the relevant physics have already enabled reasonable predictions with respect to material flow behavior and buildability, especially in the case of relatively simple geometries. The existing research in the field was systematically compiled by the authors in the framework of the activities of the RILEM Technical Committee 276 “Digital fabrication with cement-based materials”. However, further research is needed to develop reliable tools for the quantitative analysis of the entire process chain. To achieve this, experimental efforts for the characterization of material properties need to go hand in hand with comprehensive numerical simulation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D printing using concrete extrusion: A roadmap for research
Buswell, R. A., Leal de Silva, W. R., Jones, S. Z., & Dirrenberger, J. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.006 · Cited by 1,604
Mix design and fresh properties for high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Gibb, A. G. F., & Thorpe, T. (2012) · Materials and Structures · doi:10.1617/s11527-012-9828-z · Cited by 1,218
Developments in construction-scale additive manufacturing processes
Lim, S., Buswell, R. A., Le, T. T., Austin, S. A., Gibb, A. G. F., & Thorpe, T. (2012) · Automation in Construction · doi:10.1016/j.autcon.2011.06.010 · Cited by 1,205
Rheological requirements for printable concretes
Roussel, N. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.005 · Cited by 1,203
Self-citation(2017) · Effective Library and Information Centre Management · doi:10.4324/9781315256894-38 · Cited by 1,119
Vision of 3D printing with concrete — Technical, economic and environmental potentials
De Schutter, G., Lesage, K., Mechtcherine, V., Nerella, V. N., Habert, G., & Agusti-Juan, I. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.06.001 · Cited by 1,072
Self-citationThe origins of thixotropy of fresh cement pastes
Roussel, N., Ovarlez, G., Garrault, S., et al. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.09.004 · Cited by 995
Self-citationA thixotropy model for fresh fluid concretes: Theory, validation and applications
Roussel, N. (2006) · Cement and Concrete Research · doi:10.1016/j.cemconres.2006.05.025 · Cited by 967
Self-citationGosselin, C., Duballet, R., Roux, P., Gaudillière, N., Dirrenberger, J., & Morel, P. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.03.097 · Cited by 962
Structural built-up of cement-based materials used for 3D-printing extrusion techniques
Perrot, A., Rangeard, D., & Pierre, A. (2016) · Materials and Structures · doi:10.1617/s11527-015-0571-0 · Cited by 959
Self-citationEarly age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing
Wolfs, R. J. M., Bos, F. P., & Salet, T. A. M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.02.001 · Cited by 846
Self-citationDigital Concrete: Opportunities and Challenges
Wangler, T., Lloret, E., Reiter, L., Hack, N., Gramazio, F., Kohler, M., Bernhard, M., Dillenburger, B., Buchli, J., Roussel, N., et al. (2016) · RILEM Technical Letters · doi:10.21809/rilemtechlett.2016.16 · Cited by 636
Self-citationFresh and hardened properties of 3D printable cementitious materials for building and construction
Paul, S. C., Tay, Y. W. D., Panda, B., & Tan, M. J. (2018) · Archives of Civil and Mechanical Engineering · doi:10.1016/j.acme.2017.02.008 · Cited by 633
Freeform Construction: Mega-scale Rapid Manufacturing for construction
Buswell, R. A., Soar, R. C., Gibb, A. G. F., & Thorpe, A. (2007) · Automation in Construction · doi:10.1016/j.autcon.2006.05.002 · Cited by 536
Panda, B., & Tan, M. J. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.03.031 · Cited by 520
Design of a 3D printed concrete bridge by testing
Salet, T. A. M., Ahmed, Z. Y., Bos, F. P., & Laagland, H. L. M. (2018) · Virtual and Physical Prototyping · doi:10.1080/17452759.2018.1476064 · Cited by 504
Self-citationLarge-scale digital concrete construction – CONPrint3D concept for on-site, monolithic 3D-printing
Mechtcherine, V., Nerella, V. N., Will, F., Näther, M., Otto, J., & Krause, M. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.102933 · Cited by 455
Self-citationParticle-bed 3D printing in concrete construction – Possibilities and challenges
Lowke, D., Dini, E., Perrot, A., Weger, D., Gehlen, C., & Dillenburger, B. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.018 · Cited by 447
Self-citationMechanical Characterizations of 3D-printed PLLA/Steel Particle Composites
Mozafari, H., Dong, P., Hadidi, H., Sealy, M. P., & Gu, L. (2018) · Materials · doi:10.3390/ma12010001 · Cited by 342
Panda, B., Lim, J. H., & Tan, M. J. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.02.040 · Cited by 312
Zhu, B., Pan, J., Nematollahi, B., Zhou, Z., Zhang, Y., & Sanjayan, J. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108088 · Cited by 305
Suiker, A. S. J. (2018) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2018.01.010 · Cited by 288
A process classification framework for defining and describing Digital Fabrication with Concrete
Buswell, R. A., da Silva, W. R. L., Bos, F. P., Schipper, H. R., Lowke, D., Hack, N., Kloft, H., Mechtcherine, V., Wangler, T., & Roussel, N. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106068 · Cited by 254
Self-citationNumerical modeling of the strand deposition flow in extrusion-based additive manufacturing
Comminal, R., Serdeczny, M. P., Pedersen, D. B., & Spangenberg, J. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.12.013 · Cited by 243
Elastic buckling and plastic collapse during 3D concrete printing
Suiker, A. S. J., Wolfs, R. J. M., Lucas, S. M., & Salet, T. A. M. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106016 · Cited by 241
Self-citationTriaxial compression testing on early age concrete for numerical analysis of 3D concrete printing
Wolfs, R. J. M., Bos, F. P., & Salet, T. A. M. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.103344 · Cited by 239
Self-citationYammine, J., Chaouche, M., Guerinet, M., Moranville, M., & Roussel, N. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2008.03.011 · Cited by 226
Self-citationAn approach to develop printable strain hardening cementitious composites
Chaves Figueiredo, S., Romero Rodríguez, C., Ahmed, Z. Y., Bos, D. H., Xu, Y., Salet, T. M., Çopuroğlu, O., Schlangen, E., & Bos, F. P. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107651 · Cited by 211
Self-citationOvarlez, G., & Roussel, N. (2007) · Materials and Structures · doi:10.1617/s11527-005-9052-1 · Cited by 195
Self-citationPrediction of lateral form pressure exerted by concrete at low casting rates
Perrot, A., Pierre, A., Vitaloni, S., & Picandet, V. (2015) · Materials and Structures · doi:10.1617/s11527-014-0313-8 · Cited by 161
Self-citationWolfs, R. J. M., Bos, F. P., & Salet, T. A. M. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.06.060 · Cited by 147
Self-citationPumping of Fresh Concrete: Insights and Challenges
Schutter, G. D., & Feys, D. (2016) · RILEM Technical Letters · doi:10.21809/rilemtechlett.2016.15 · Cited by 115
Rheological Property Criteria for Buildable 3D Printing Concrete
Jeong, H., Han, S., Choi, S., Lee, Y. J., Yi, S. T., & Kim, K. S. (2019) · Materials · doi:10.3390/ma12040657 · Cited by 111
Study on concrete pumpability combining different laboratory tools and linkage to rheology
Secrieru, E., Fataei, S., Schröfl, C., & Mechtcherine, V. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.03.199 · Cited by 96
Self-citationInteractions between rheological properties and pumping of self-compacting concrete
Feys, D. (2009) · Ghent University Academic Bibliography (Ghent University) · Cited by 52
Large Scale Testing of Digitally Fabricated Concrete (DFC) Elements
Bos, F. P., Wolfs, R. J. M., Ahmed, Z., & Salet, T. A. M. (2018) · Rilem bookseries · doi:10.1007/978-3-319-99519-9_12 · Cited by 51
Self-citationPrediction of Concrete Pumping Using Various Rheological Models
Choi, M.-S., Kim, Y. J., & Kim, J. K. (2014) · International Journal of Concrete Structures and Materials · doi:10.1007/s40069-014-0084-1 · Cited by 50
Experimental and Numerical Techniques to Characterize Structural Properties of Fresh Concrete
Carlo, T. D., Khoshnevis, B., & Carlson, A. (2013) · ASME International Mechanical Engineering Congress and Exposition (IMECE) · doi:10.1115/imece2013-63993 · Cited by 42
da Silva, W. R. L., Fryda, H., Bousseau, J.-N., Andreani, P.-A., & Andersen, T. J. (2019) · Advances in intelligent systems and computing · doi:10.1007/978-3-030-20216-3_4 · Cited by 28
The influence of material temperature on the in-print strength and stability of a 3D print mortar
Bos, F. P., Wolfs, R. J. M., Ahmed, Z., Hermens, L. J., & Salet, T. A. M. (2019) · CRC Press eBooks · doi:10.1201/9780429426506-76 · Cited by 9
Self-citationGrampeix, G. (2013) · theses.fr (ABES) · doi:10.70675/7750d620z4100z4edez9e82z83c185cf79da · Cited by 3
Cited by
Extrusion-based concrete 3D printing from a material perspective: A state-of-the-art review
Mohan, M. K., Rahul, A. V., De Schutter, G., & Van Tittelboom, K. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103855 · Cited by 384
On the emergence of 3D printable Engineered, Strain Hardening Cementitious Composites (ECC/SHCC)
Li, V. C., Bos, F. P., Yu, K., McGee, W., Ng, T. Y., Figueiredo, S. C., Nefs, K., Mechtcherine, V., Nerella, V. N., Pan, J., et al. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106038 · Cited by 342
Self-citationExtrusion-based additive manufacturing technologies: State of the art and future perspectives
Altıparmak, S. C., Yardley, V. A., Shi, Z., & Lin, J. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.09.032 · Cited by 320
Technology readiness: A global snapshot of 3D concrete printing and the frontiers for development
Ma, G., Buswell, R., Leal da Silva, W. R., Wang, L., Xu, J., & Jones, S. Z. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.106774 · Cited by 280
Liu, C., Wang, X., Chen, Y., Zhang, C., Ma, L., Deng, Z., Chen, C., Zhang, Y., Pan, J., & Banthia, N. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104158 · Cited by 266
Metadata
- Authors
- Mechtcherine, V., Bos, F. P., Perrot, A., da Silva, W. R. L., Nerella, V. N., Fataei, S., Wolfs, R. J. M., Sonebi, M., & Roussel, N.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2020-06
- Volume
- 132
- Pages
- 106037
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W3012533326
- Cited by
- 598
- References
- 41
- FWCI
- 38.92
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.