The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
A systematical review of 3D printable cementitious materials
Open accessAbstract
Abstract 3D printing, or additive manufacturing, is a technology which adopts layer-by-layer additive deposition process to build three-dimensional objects. Over the past decade, 3D printing has been attracting more and more attention in the building and construction industry. Compared with conventional concrete casting techniques, 3D printing contributes to higher efficiency with freeform construction, greatly reduced labor and much less construction waste. However, 3D printable cementitious materials are different from conventional concrete in terms of rheology, printability, and mechanical performances. This paper aims to systematically bridge the gap between the requirement and research and development of 3D printable cementitious materials to date. Guided by 3D printing process and multi-level design of cementitious materials, the requirements for 3D printable cementitious material at different material development levels are discussed. This paper provides insights for the future development of 3D printable cementitious materials for building and construction by controlling the basic inputs of materials to obtain desired structural performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Neville, A. M. (1968) · Virtual Defense Library (Ministerio de Defensa) · Cited by 5,444
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
Barnes, H. A., Hutton, J. F., & Walters, K. (1989) · Cited by 2,219
Dealy, J. M., & Wissbrun, K. F. (1990) · Melt Rheology and Its Role in Plastics Processing · doi:10.1007/978-1-4615-9738-4_1 · Cited by 1,370
Bos, F., Wolfs, R., Ahmed, Z., & Salet, T. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1209867 · Cited by 1,257
Mix design and fresh properties for high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Gibb, A. G. F., & Thorpe, T. (2012) · Materials and Structures · doi:10.1617/s11527-012-9828-z · Cited by 1,218
Developments in construction-scale additive manufacturing processes
Lim, S., Buswell, R. A., Le, T. T., Austin, S. A., Gibb, A. G. F., & Thorpe, T. (2012) · Automation in Construction · doi:10.1016/j.autcon.2011.06.010 · Cited by 1,205
Automated construction by contour crafting—related robotics and information technologies
Khoshnevis, B. (2004) · Automation in Construction · doi:10.1016/j.autcon.2003.08.012 · Cited by 1,161
Hardened properties of high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Law, R., Gibb, A. G. F., & Thorpe, T. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.12.003 · Cited by 1,020
Gosselin, C., Duballet, R., Roux, P., Gaudillière, N., Dirrenberger, J., & Morel, P. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.03.097 · Cited by 962
Structural built-up of cement-based materials used for 3D-printing extrusion techniques
Perrot, A., Rangeard, D., & Pierre, A. (2016) · Materials and Structures · doi:10.1617/s11527-015-0571-0 · Cited by 959
Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing
Wolfs, R. J. M., Bos, F. P., & Salet, T. A. M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.02.001 · Cited by 846
Kazemian, A., Yuan, X., Cochran, E., & Khoshnevis, B. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.015 · Cited by 774
Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material
Panda, B., Paul, S. C., & Tan, M. J. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.07.123 · Cited by 742
Self-citationEffect of surface moisture on inter-layer strength of 3D printed concrete
Sanjayan, J., Nematollahi, B., Xia, M., & Marchment, T. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.03.232 · Cited by 713
Ma, G., Li, Z., & Wang, L. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.12.051 · Cited by 616
Measurement of tensile bond strength of 3D printed geopolymer mortar
Panda, B., Paul, S. C., Mohamed, N. A. N., Tay, Y. W. D., & Tan, M. J. (2018) · Measurement · doi:10.1016/j.measurement.2017.08.051 · Cited by 592
Self-citationEffect of constituents on rheological properties of fresh concrete-A review
Jiao, D., Shi, C., Yuan, Q., An, X., Liu, Y., & Li, H. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.07.016 · Cited by 583
Viscosity-enhancing admixtures for cement-based materials — An overview
Khayat, K. H. (1998) · Cement and Concrete Composites · doi:10.1016/s0958-9465(98)80006-1 · Cited by 568
An Overview of 3D Printing Technologies for Food Fabrication
Sun, J., Zhou, W., Huang, D., Fuh, J. Y. H., & Hong, G. S. (2015) · Food and Bioprocess Technology · doi:10.1007/s11947-015-1528-6 · Cited by 549
Design of a 3D printed concrete bridge by testing
Salet, T. A. M., Ahmed, Z. Y., Bos, F. P., & Laagland, H. L. M. (2018) · Virtual and Physical Prototyping · doi:10.1080/17452759.2018.1476064 · Cited by 504
Properties of 3D-printed fiber-reinforced Portland cement paste
Hambach, M., & Volkmer, D. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.02.001 · Cited by 470
(2003) · Elsevier eBooks · doi:10.1016/b978-0-7506-5686-3.x5246-x · Cited by 458
(2008) · Fluid Mechanics and Its Applications · doi:10.1007/978-1-4020-6742-6 · Cited by 436
Large-scale 3D printing by a team of mobile robots
Zhang, X., Li, M., Lim, J. H., Weng, Y., Tay, Y. W. D., Pham, H., & Pham, Q.-C. (2018) · Automation in Construction · doi:10.1016/j.autcon.2018.08.004 · Cited by 418
Self-citationImproving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay
Panda, B., Ruan, S., Unluer, C., & Tan, M. J. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.11.109 · Cited by 405
Self-citationRethinking reinforcement for digital fabrication with concrete
Asprone, D., Menna, C., Bos, F. P., Salet, T. A. M., Mata-Falcón, J., & Kaufmann, W. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.020 · Cited by 385
Mega-scale fabrication by Contour Crafting
Khoshnevis, B., Hwang, D., Yao, K. T., & Yeh, Z. (2006) · International Journal of Industrial and Systems Engineering · doi:10.1504/ijise.2006.009791 · Cited by 378
Mechanical properties of structures 3D printed with cementitious powders
Feng, P., Meng, X., Chen, J.-F., & Ye, L. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.05.132 · Cited by 369
Bioprinting technology and its applications
Seol, Y.-J., Kang, H.-W., Lee, S. J., Atala, A., & Yoo, J. J. (2014) · European Journal of Cardio-Thoracic Surgery · doi:10.1093/ejcts/ezu148 · Cited by 355
A self-reinforced cementitious composite for building-scale 3D printing
Soltan, D. G., & Li, V. C. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.03.017 · Cited by 330
Design 3D printing cementitious materials via Fuller Thompson theory and Marson-Percy model
Weng, Y., Li, M., Tan, M. J., & Qian, S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.12.112 · Cited by 304
Self-citationSuiker, A. S. J. (2018) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2018.01.010 · Cited by 288
Experimental Exploration of Metal Cable as Reinforcement in 3D Printed Concrete
Bos, F., Ahmed, Z., Jutinov, E., & Salet, T. (2017) · Materials · doi:10.3390/ma10111314 · Cited by 276
Toward site-specific and self-sufficient robotic fabrication on architectural scales
Keating, S. J., Leland, J. C., Cai, L., & Oxman, N. (2017) · Science Robotics · doi:10.1126/scirobotics.aam8986 · Cited by 259
3D Printing of Conductive Complex Structures with In Situ Generation of Silver Nanoparticles
Fantino, E., Chiappone, A., Roppolo, I., Manfredi, D., Bongiovanni, R., Pirri, C. F., & Calignano, F. (2016) · Advanced Materials · doi:10.1002/adma.201505109 · Cited by 253
3D printing and additive manufacturing : principles and applications
Chua, C. K., & Leong, K. F. (2015) · Cited by 246
Self-citationMa, S., Qian, Y., & Kawashima, S. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.02.022 · Cited by 204
Self-citationDevelopment of a Viable Concrete Printing Process
Lim, S., Buswell, R., Le, T., Wackrow, R., Austin, S., Gibb, A., & Thorpe, T. (2011) · Proceedings of the International Symposium on Automation and Robotics in Construction (IAARC) · doi:10.22260/isarc2011/0124 · Cited by 192
Fiber reinforcement during 3D printing
Christ, S., Schnabel, M., Vorndran, E., Groll, J., & Gbureck, U. (2015) · Materials Letters · doi:10.1016/j.matlet.2014.10.065 · Cited by 183
Wolfs, R. J. M., Bos, F. P., & Salet, T. A. M. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.06.060 · Cited by 147
Superplasticizers: properties and applications in concrete
Ramachandran, V. S., Malhotra, V. M., Jolicoeur, C. R., et al. (1998) · doi:10.4095/328653 · Cited by 136
Concrete Wall Fabrication by Contour Crafting
Hwang, D., & Khoshnevis, B. (2004) · International Symposium on Automation and Robotics in Construction (ISARC) · doi:10.22260/isarc2004/0057 · Cited by 98
Pierre, A., Weger, D., Perrot, A., & Lowke, D. (2018) · Materials and Structures · doi:10.1617/s11527-018-1148-5 · Cited by 86
Qian, Y., & Schutter, G. D. (2018) · Materials · doi:10.3390/ma11050695 · Cited by 69
Self-citationDevelopment of an Automated Freeform Construction System and its Construction Materials
Jeon, K. H., Park, M.-B., Kang, M.-K., & Kim, J. (2013) · International Symposium on Automation and Robotics in Construction (ISARC) · doi:10.22260/isarc2013/0153 · Cited by 30
Rheology and Printability of Engineered Cementitious Composites-A Literature Review
Weng, Y., Lu, B. H., Qian, S., & Tan, M. J. (2016) · DR-NTU (Nanyang Technological University) · Cited by 27
Self-citationDeformation Analysis of Sulfur Concrete Structures Made by Contour Crafting
Khoshnevis, B., Xiao, Y. U. A. N., Zahiri, B., Zhang, J., & Xia, B. (2015) · AIAA SPACE Conference & Exposition · doi:10.2514/6.2015-4452 · Cited by 16
Toward Development of Self-Compacting No-Slump Concrete Mixtures
Hoornahad, H. (2014) · Research Repository (Delft University of Technology) · doi:10.4233/uuid:431aa99f-f315-4030-838c-b550dff12ddf · Cited by 12
Cited by
Amran, M., Huang, S.-S., Onaizi, A. M., Makul, N., Abdelgader, H. S., & Ozbakkaloglu, T. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129029 · Cited by 548
Mix design concepts for 3D printable concrete: A review
Zhang, C., Nerella, V. N., Krishna, A., Wang, S., Zhang, Y., Mechtcherine, V., & Banthia, N. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104155 · Cited by 421
Sustainable materials for 3D concrete printing
Bhattacherjee, S., Basavaraj, A. S., Rahul, A. V., Santhanam, M., Gettu, R., Panda, B., Schlangen, E., Chen, Y., Copuroglu, O., Ma, G., et al. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104156 · Cited by 321
Ye, J., Cui, C., Yu, J., Yu, K., & Dong, F. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122586 · Cited by 262
3-D printing of concrete: Beyond horizons
Khan, M. S., Sanchez, F., & Zhou, H. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106070 · Cited by 260
Metadata
- Authors
- Lu, B., Weng, Y., Li, M., Qian, Y., Leong, K. F., Tan, M. J., & Qian, S.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2019-05
- Volume
- 207
- Pages
- 477-490
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2920739940
- Cited by
- 288
- References
- 50
- FWCI
- 20.21
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.