The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Solid polymer electrolyte soft interface layer with 3D lithium anode for all-solid-state lithium batteries
Abstract
Abstract Garnet electrolyte-based lithium (Li) metal batteries, which employ garnet-type Li7La3Zr2O12 (LLZO) as electrolyte and Li metal as anode, are regarded as a promising candidate for high-energy batteries. However, Li dendrites formation as well as poor solid-solid contact between the electrolyte and electrodes result in high interfacial resistance, large polarizations, and low Coulombic efficiency. Herein, we demonstrated that solid polymer electrolyte (SPE) soft interface layer deposited on garnet electrolyte (Ta-doped LLZO (LLZTO)) surface along with 3D Li metal anode can address these obstacles. In this architecture, SPE layer was deposited on garnet electrolyte surface to endow connected interface between the electrolyte and electrodes and thus settled the interface contact issue. 3D Li metal anode can accomplish dendrite-suppression by increasing Li ions deposition sites to lower the effective current density and render a uniform Li nucleation with 3D frameworks. With this ingenious arrangement, the solid-state 3D Li︱SPE-LLZTO-SPE︱3D Li symmetrical cell exhibits a stable voltage profile over 700 h and solid-state LiFePO4︱SPE-LLZTO-SPE︱3D Li full cell also shows an extremely superior cyclability and high Coulombic efficiency even at 90 °C. This work provides an alternative option for manufacturing safe and stable solid-state Li metal batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Lithium battery chemistries enabled by solid-state electrolytes
Manthiram, A., Yu, X., & Wang, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.103 · Cited by 4,689
A solid future for battery development
Janek, J., & Zeier, W. G. (2016) · Nature Energy · doi:10.1038/nenergy.2016.141 · Cited by 3,979
Fast Lithium Ion Conduction in Garnet‐Type Li7La3Zr2O12
Murugan, R., Thangadurai, V., & Weppner, W. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200701144 · Cited by 3,250
Negating interfacial impedance in garnet-based solid-state Li metal batteries
Han, X., Gong, Y., Fu, K., He, X., Hitz, G. T., Dai, J., Pearse, A., Liu, B., Wang, H., Rubloff, G., et al. (2017) · Nature Materials · doi:10.1038/nmat4821 · Cited by 2,025
Albertus, P., Babinec, S., Litzelman, S., & Newman, A. (2017) · Nature Energy · doi:10.1038/s41560-017-0047-2 · Cited by 1,888
The Impact of Elastic Deformation on Deposition Kinetics at Lithium/Polymer Interfaces
Monroe, C., & Newman, J. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1850854 · Cited by 1,701
Interface Stability in Solid-State Batteries
Richards, W. D., Miara, L. J., Wang, Y., Kim, J. C., & Ceder, G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04082 · Cited by 1,652
Garnet-type solid-state fast Li ion conductors for Li batteries: critical review
Thangadurai, V., Narayanan, S., & Pinzaru, D. (2014) · Chemical Society Reviews · doi:10.1039/c4cs00020j · Cited by 1,534
Chen, L., Li, Y., Li, S.-P., Fan, L.-Z., Nan, C.-W., & Goodenough, J. B. (2018) · Nano Energy · doi:10.1016/j.nanoen.2017.12.037 · Cited by 1,423
Self-citationZhang, X., Liu, T., Zhang, S., Huang, X., Xu, B., Lin, Y., Xu, B., Li, L., Nan, C.-W., & Shen, Y. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b06364 · Cited by 1,017
Self-citationMetallic anodes for next generation secondary batteries
Kim, H., Jeong, G., Kim, Y.-U., Kim, J.-H., Park, C.-M., & Sohn, H.-J. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60177c · Cited by 1,010
Plating a Dendrite-Free Lithium Anode with a Polymer/Ceramic/Polymer Sandwich Electrolyte
Zhou, W., Wang, S., Li, Y., Xin, S., Manthiram, A., & Goodenough, J. B. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b05341 · Cited by 1,006
Ohta, N., Takada, K., Zhang, L., Ma, R., Osada, M., & Sasaki, T. (2006) · Advanced Materials · doi:10.1002/adma.200502604 · Cited by 899
An anion-immobilized composite electrolyte for dendrite-free lithium metal anodes
Zhao, C.-Z., Zhang, X.-Q., Cheng, X.-B., Zhang, R., Xu, R., Chen, P.-Y., Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1708489114 · Cited by 849
Prestoring Lithium into Stable 3D Nickel Foam Host as Dendrite‐Free Lithium Metal Anode
Chi, S., Liu, Y., Song, W., Fan, L., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700348 · Cited by 846
Self-citationSharafi, A., Kazyak, E., Davis, A. L., Yu, S., Thompson, T., Siegel, D. J., Dasgupta, N. P., & Sakamoto, J. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b03002 · Cited by 844
Zhang, J., Zhao, N., Zhang, M., Li, Y., Chu, P. K.-H., Guo, X., Di, Z., Wang, X., & Li, H. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.09.002 · Cited by 818
Self-citationCoralloid Carbon Fiber-Based Composite Lithium Anode for Robust Lithium Metal Batteries
Zhang, R., Chen, X., Shen, X., Zhang, X.-Q., Chen, X.-R., Cheng, X.-B., Yan, C., Zhao, C.-Z., & Zhang, Q. (2018) · Joule · doi:10.1016/j.joule.2018.02.001 · Cited by 728
A Flexible Solid Electrolyte Interphase Layer for Long‐Life Lithium Metal Anodes
Li, N., Shi, Y., Yin, Y., Zeng, X., Li, J., Li, C., Wan, L., Wen, R., & Guo, Y. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201710806 · Cited by 721
Structure and dynamics of the fast lithium ion conductor “Li7La3Zr2O12”
Buschmann, H., Dölle, J., Berendts, S., Kuhn, A., Bottke, P., Wilkening, M., Heitjans, P., Senyshyn, A., Ehrenberg, H., Lotnyk, A., et al. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c1cp22108f · Cited by 695
Transition from Superlithiophobicity to Superlithiophilicity of Garnet Solid-State Electrolyte
Luo, W., Gong, Y., Zhu, Y., Fu, K. K., Dai, J., Lacey, S. D., Wang, C., Liu, B., Han, X., Mo, Y., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b06777 · Cited by 671
Artificial Soft–Rigid Protective Layer for Dendrite‐Free Lithium Metal Anode
Xu, R., Zhang, X., Cheng, X., Peng, H., Zhao, C., Yan, C., & Huang, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705838 · Cited by 670
Beyond lithium ion batteries: Higher energy density battery systems based on lithium metal anodes
Shen, X., Liu, H., Cheng, X.-B., Yan, C., & Huang, J.-Q. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.12.002 · Cited by 653
Dual‐Layered Film Protected Lithium Metal Anode to Enable Dendrite‐Free Lithium Deposition
Yan, C., Cheng, X., Tian, Y., Chen, X., Zhang, X., Li, W., Huang, J., & Zhang, Q. (2018) · Advanced Materials · doi:10.1002/adma.201707629 · Cited by 513
Dendrite-Free Li-Metal Battery Enabled by a Thin Asymmetric Solid Electrolyte with Engineered Layers
Duan, H., Yin, Y.-X., Shi, Y., Wang, P.-F., Zhang, X.-D., Yang, C.-P., Shi, J.-L., Wen, R., Guo, Y.-G., & Wan, L.-J. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b10864 · Cited by 482
Zeng, X.-X., Yin, Y.-X., Li, N.-W., Du, W.-C., Guo, Y.-G., & Wan, L.-J. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b10088 · Cited by 459
Li, D., Chen, L., Wang, T., & Fan, L.-Z. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18123 · Cited by 398
Self-citationCheng, X.-B., Yan, C., Huang, J.-Q., Li, P., Zhu, L., Zhao, L., Zhang, Y., Zhu, W., Yang, S.-T., & Zhang, Q. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.09.003 · Cited by 394
Super Soft All-Ethylene Oxide Polymer Electrolyte for Safe All-Solid Lithium Batteries
Porcarelli, L., Gerbaldi, C., Bella, F., & Nair, J. R. (2016) · Scientific Reports · doi:10.1038/srep19892 · Cited by 383
Interfacial Chemistry in Solid-State Batteries: Formation of Interphase and Its Consequences
Wang, S., Xu, H., Li, W., Dolocan, A., & Manthiram, A. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b09531 · Cited by 342
Transient Behavior of the Metal Interface in Lithium Metal–Garnet Batteries
Fu, K. (., Gong, Y., Fu, Z., Xie, H., Yao, Y., Liu, B., Carter, M., Wachsman, E., & Hu, L. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201708637 · Cited by 290
Garnet Solid Electrolyte Protected Li-Metal Batteries
Liu, B., Gong, Y., Fu, K., Han, X., Yao, Y., Pastel, G., Yang, C., Xie, H., Wachsman, E. D., & Hu, L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b03887 · Cited by 287
Li 2 S 5 -based ternary-salt electrolyte for robust lithium metal anode
Zhao, C.-Z., Cheng, X.-B., Zhang, R., Peng, H.-J., Huang, J.-Q., Ran, R., Huang, Z.-H., Wei, F., & Zhang, Q. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2016.01.007 · Cited by 260
Chen, L., & Fan, L. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.03.015 · Cited by 259
Self-citationSulfurized solid electrolyte interphases with a rapid Li+ diffusion on dendrite-free Li metal anodes
Cheng, X.-B., Yan, C., Peng, H.-J., Huang, J.-Q., Yang, S.-T., & Zhang, Q. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.03.008 · Cited by 257
Second Phase Effects on the Conductivity of Non‐Aqueous Salt Solutions: “Soggy Sand Electrolytes”
Bhattacharyya, A. J., & Maier, J. (2004) · Advanced Materials · doi:10.1002/adma.200306210 · Cited by 225
Chen, X., Hou, T.-Z., Li, B., Yan, C., Zhu, L., Guan, C., Cheng, X.-B., Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2017.01.003 · Cited by 216
In Situ Neutron Depth Profiling of Lithium Metal–Garnet Interfaces for Solid State Batteries
Wang, C., Gong, Y., Dai, J., Zhang, L., Xie, H., Pastel, G., Liu, B., Wachsman, E., Wang, H., & Hu, L. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b07904 · Cited by 207
Liu, Y., Lin, D., Jin, Y., Liu, K., Tao, X., Zhang, Q., Zhang, X., & Cui, Y. (2017) · Science Advances · doi:10.1126/sciadv.aao0713 · Cited by 160
Self-citation
Cited by
Tailoring inorganic–polymer composites for the mass production of solid-state batteries
Fan, L.-Z., He, H., & Nan, C.-W. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00320-0 · Cited by 1,034
Self-citationZheng, Y., Yao, Y., Ou, J., Li, M., Luo, D., Dou, H., Li, Z., Amine, K., Yu, A., & Chen, Z. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00305k · Cited by 1,030
Recent Advances in Energy Chemistry between Solid-State Electrolyte and Safe Lithium-Metal Anodes
Cheng, X.-B., Zhao, C.-Z., Yao, Y.-X., Liu, H., & Zhang, Q. (2019) · Chem · doi:10.1016/j.chempr.2018.12.002 · Cited by 874
Progress and Perspective of Ceramic/Polymer Composite Solid Electrolytes for Lithium Batteries
Li, S., Zhang, S., Shen, L., Liu, Q., Ma, J., Lv, W., He, Y., & Yang, Q. (2020) · Advanced Science · doi:10.1002/advs.201903088 · Cited by 825
Towards practical lithium-metal anodes
Zhang, X., Yang, Y., & Zhou, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00838a · Cited by 726
Metadata
- Authors
- Chi, S.-S., Liu, Y., Zhao, N., Guo, X., Nan, C.-W., & Fan, L.-Z.
- Venue
- Energy Storage Materials
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 17
- Pages
- 309-316
- ISSN
- 2405-8289 (ISSN-L)
- 2405-8297
- OpenAlex
- W2823492535
- Cited by
- 362
- References
- 43
- FWCI
- 15.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.