The DOI matches its Crossref record; 214 of the 214 references it cites were found in a registry or an index.
Recent advances of thermal safety of lithium ion battery for energy storage
Abstract
Abstract Lithium ion batteries have been widely used in the power-driven system and energy storage system. While thermal safety for lithium ion battery has been constantly concerned all over the world due to the thermal runaway problems occurred in recent years. Lithium ion battery has high temperature sensitivity and the relatively narrow operating temperature range because of the complex electrochemical reactions at different temperatures. And the temperature change, including the global temperature change in different seasons and the local temperature rise that is induced by its self-heating etc., can trigger side reactions and then lead to thermal runaway, which should be further considered to ensure thermal safety of lithium ion battery. This review summarizes the inducements of thermal runaway and relevant solutions, spanning a wide temperature range. The low temperature induced issues, such as capacity fade and lithium plating and dendrite, can cause internal short circuit (ISC), while as the temperature is above the critical temperature, the speeding of side reactions and reduction of lifespan (T > 40 °C) and thermal runaway (T > 90 °C) will be triggered. In order to solve the thermal issues in batteries, extensive approaches have been investigated to prevent the occurrence, propagation and deterioration of thermal runaway, from the perspective of material to the battery system. The triggered mechanism at a wide temperature range, key factors for thermal safety and the effective heat dissipation strategies are concluded in this review. This review is expected to offer effective thermal safety strategies and promote the development of lithium ion battery with high-energy density.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal runaway mechanism of lithium ion battery for electric vehicles: A review
Feng, X., Ouyang, M., Liu, X., Lu, L., Xia, Y., & He, X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.05.013 · Cited by 4,182
Self-citationTrue Performance Metrics in Electrochemical Energy Storage
Gogotsi, Y., & Simon, P. (2011) · Science · doi:10.1126/science.1213003 · Cited by 2,440
Materials for lithium-ion battery safety
Liu, K., Liu, Y., Lin, D., Pei, A., & Cui, Y. (2018) · Science Advances · doi:10.1126/sciadv.aas9820 · Cited by 1,625
Multidimensional materials and device architectures for future hybrid energy storage
Lukatskaya, M. R., Dunn, B., & Gogotsi, Y. (2016) · Nature Communications · doi:10.1038/ncomms12647 · Cited by 1,618
High-energy cathode material for long-life and safe lithium batteries
Sun, Y.-K., Myung, S.-T., Park, B.-C., Prakash, J., Belharouak, I., & Amine, K. (2009) · Nature Materials · doi:10.1038/nmat2418 · Cited by 1,519
Lin, F., Markus, I. M., Nordlund, D., Weng, T.-C., Asta, M. D., Xin, H. L., & Doeff, M. M. (2014) · Nature Communications · doi:10.1038/ncomms4529 · Cited by 1,481
Jung, R., Metzger, M., Maglia, F., Stinner, C., & Gasteiger, H. A. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0021707jes · Cited by 1,350
Liu, H., Wei, Z., He, W., & Zhao, J. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.08.016 · Cited by 1,332
Self-citationEnergy storage deployment and innovation for the clean energy transition
Kittner, N., Lill, F., & Kammen, D. M. (2017) · Nature Energy · doi:10.1038/nenergy.2017.125 · Cited by 1,246
A critical review of battery thermal performance and liquid based battery thermal management
Wu, W., Wang, S., Wu, W., Chen, K., Hong, S., & Lai, Y. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.12.051 · Cited by 1,214
A review of power battery thermal energy management
Rao, Z., & Wang, S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.096 · Cited by 1,207
Self-citationJaguemont, J., Boulon, L., & Dubé, Y. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.11.034 · Cited by 1,188
Safety mechanisms in lithium-ion batteries
Balakrishnan, P. G., Ramesh, R., & Prem Kumar, T. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.12.002 · Cited by 1,132
Jung, S., Gwon, H., Hong, J., Park, K., Seo, D., Kim, H., Hyun, J., Yang, W., & Kang, K. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201300787 · Cited by 1,124
Wang, Q., Jiang, B., Li, B., & Yan, Y. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.05.033 · Cited by 1,083
Bak, S.-M., Hu, E., Zhou, Y., Yu, X., Senanayake, S. D., Cho, S.-J., Kim, K.-B., Chung, K. Y., Yang, X.-Q., & Nam, K.-W. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am506712c · Cited by 1,010
Thermal energy storage: Recent developments and practical aspects
Zhang, H., Baeyens, J., Cáceres, G., Degrève, J., & Lv, Y. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2015.10.003 · Cited by 910
Lithium-ion battery structure that self-heats at low temperatures
Wang, C.-Y., Zhang, G., Ge, S., Xu, T., Ji, Y., Yang, X.-G., & Leng, Y. (2016) · Nature · doi:10.1038/nature16502 · Cited by 878
Thermal Runaway of Lithium-Ion Batteries without Internal Short Circuit
Liu, X., Ren, D., Hsu, H., Feng, X., Xu, G.-L., Zhuang, M., Gao, H., Lu, L., Han, X., Chu, Z., et al. (2018) · Joule · doi:10.1016/j.joule.2018.06.015 · Cited by 869
Self-citationUsing peer-to-peer energy-trading platforms to incentivize prosumers to form federated power plants
Morstyn, T., Farrell, N., Darby, S. J., & McCulloch, M. D. (2018) · Nature Energy · doi:10.1038/s41560-017-0075-y · Cited by 831
Liu, Q., Su, X., Lei, D., Qin, Y., Wen, J., Guo, F., Wu, Y. A., Rong, Y., Kou, R., Xiao, X., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0180-6 · Cited by 815
Li−Fe−P−O2 Phase Diagram from First Principles Calculations
Ong, S. P., Wang, L., Kang, B., & Ceder, G. (2008) · Chemistry of Materials · doi:10.1021/cm702327g · Cited by 814
Reciprocating air flow for Li-ion battery thermal management to improve temperature uniformity
Mahamud, R., & Park, C. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.02.076 · Cited by 787
Feng, X., Zheng, S., Ren, D., He, X., Wang, L., Cui, H., Liu, X., Jin, C., Zhang, F., Xu, C., et al. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.04.009 · Cited by 771
Self-citationA Review on Lithium-Ion Batteries Safety Issues: Existing Problems and Possible Solutions
Wen, J., Yu, Y., & Chen, C. (2012) · Materials Express · doi:10.1166/mex.2012.1075 · Cited by 754
Ong, S. P., Mo, Y., Richards, W. D., Miara, L., Lee, H. S., & Ceder, G. (2013) · Energy Environ. Sci. · doi:10.1039/c2ee23355j · Cited by 710
Energy conversion approaches and materials for high-efficiency photovoltaics
Green, M. A., & Bremner, S. P. (2017) · Nature Materials · doi:10.1038/nmat4676 · Cited by 685
Magnetically aligned graphite electrodes for high-rate performance Li-ion batteries
Billaud, J., Bouville, F., Magrini, T., Villevieille, C., & Studart, A. R. (2016) · Nature Energy · doi:10.1038/nenergy.2016.97 · Cited by 671
Nam, K., Bak, S., Hu, E., Yu, X., Zhou, Y., Wang, X., Wu, L., Zhu, Y., Chung, K. Y., & Yang, X. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200693 · Cited by 594
Feng, X., Sun, J., Ouyang, M., Wang, F., He, X., Lu, L., & Peng, H. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.017 · Cited by 589
Design optimization of electric vehicle battery cooling plates for thermal performance
Jarrett, A., & Kim, I. Y. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.06.090 · Cited by 560
Fan, L., Khodadadi, J. M., & Pesaran, A. A. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.050 · Cited by 534
Oxygen Release Degradation in Li‐Ion Battery Cathode Materials: Mechanisms and Mitigating Approaches
Sharifi‐Asl, S., Lu, J., Amine, K., & Shahbazian‐Yassar, R. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900551 · Cited by 532
An alternative cooling system to enhance the safety of Li-ion battery packs
Kizilel, R., Sabbah, R., Selman, J. R., & Al-Hallaj, S. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.06.074 · Cited by 513
Experimental investigation on thermal management of electric vehicle battery with heat pipe
Rao, Z., Wang, S., Wu, M., Lin, Z., & Li, F. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.08.014 · Cited by 486
Self-citationA 3D thermal runaway propagation model for a large format lithium ion battery module
Feng, X., Lu, L., Ouyang, M., Li, J., & He, X. (2016) · Energy · doi:10.1016/j.energy.2016.08.094 · Cited by 466
Zou, D., Ma, X., Liu, X., Zheng, P., & Hu, Y. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.12.024 · Cited by 461
Self-citationWu, W., Yang, X., Zhang, G., Chen, K., & Wang, S. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.02.022 · Cited by 455
Li, W. Q., Qu, Z. G., He, Y. L., & Tao, Y. B. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.006 · Cited by 416
Self-citationKarimi, G., & Li, X. (2013) · International Journal of Energy Research · doi:10.1002/er.1956 · Cited by 411
High-performance battery electrodes via magnetic templating
Sander, J. S., Erb, R. M., Li, L., Gurijala, A., & Chiang, Y.-M. (2016) · Nature Energy · doi:10.1038/nenergy.2016.99 · Cited by 409
Khateeb, S. A., Farid, M. M., Selman, J. R., & Al-Hallaj, S. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.09.070 · Cited by 405
Jiaqiang, E., Han, D., Qiu, A., Zhu, H., Deng, Y., Chen, J., Zhao, X., Zuo, W., Wang, H., Chen, J., et al. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.12.115 · Cited by 404
Fernandes, Y., Bry, A., & de Persis, S. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.03.034 · Cited by 403
Improving battery safety by early detection of internal shorting with a bifunctional separator
Wu, H., Zhuo, D., Kong, D., & Cui, Y. (2014) · Nature Communications · doi:10.1038/ncomms6193 · Cited by 400
Ultra-thin minichannel LCP for EV battery thermal management
Jin, L. W., Lee, P. S., Kong, X. X., Fan, Y., & Chou, S. K. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.07.013 · Cited by 393
Thermal management of a Li-ion battery using carbon fiber-PCM composites
Babapoor, A., Azizi, M., & Karimi, G. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.02.068 · Cited by 380
Ye, Y., Saw, L. H., Shi, Y., & Tay, A. A. O. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.04.066 · Cited by 375
Heat dissipation design for lithium-ion batteries
Wu, M.-S., Liu, K. H., Wang, Y.-Y., & Wan, C.-C. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00048-4 · Cited by 373
Samimi, F., Babapoor, A., Azizi, M., & Karimi, G. (2016) · Energy · doi:10.1016/j.energy.2015.12.064 · Cited by 372
Heat transfer and thermal management with PCMs in a Li-ion battery cell for electric vehicles
Javani, N., Dincer, I., Naterer, G. F., & Yilbas, B. S. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.12.076 · Cited by 370
Liang, J., Gan, Y., & Li, Y. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.10.063 · Cited by 367
Li, H., Duan, Q., Zhao, C., Huang, Z., & Wang, Q. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.03.116 · Cited by 357
Thermal modeling of cylindrical lithium ion battery during discharge cycle
Jeon, D. H., & Baek, S. M. (2011) · Energy Conversion and Management · doi:10.1016/j.enconman.2011.04.013 · Cited by 352
Zhao, R., Zhang, S., Liu, J., & Gu, J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.09.001 · Cited by 343
Interaction of cyclic ageing at high-rate and low temperatures and safety in lithium-ion batteries
Fleischhammer, M., Waldmann, T., Bisle, G., Hogg, B.-I., & Wohlfahrt-Mehrens, M. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.135 · Cited by 342
Simulation and experimental study on lithium ion battery short circuit
Zhao, R., Liu, J., & Gu, J. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.04.016 · Cited by 342
Guo, R., Lu, L., Ouyang, M., & Feng, X. (2016) · Scientific Reports · doi:10.1038/srep30248 · Cited by 339
Failure propagation in multi-cell lithium ion batteries
Lamb, J., Orendorff, C. J., Steele, L. A. M., & Spangler, S. W. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.081 · Cited by 335
Zhao, R., Gu, J., & Liu, J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.007 · Cited by 332
Safety issues caused by internal short circuits in lithium-ion batteries
Liu, B., Jia, Y., Li, J., Yin, S., Yuan, C., Hu, Z., Wang, L., Li, Y., & Xu, J. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta08997c · Cited by 327
Rao, Z., Wang, S., & Zhang, G. (2011) · Energy Conversion and Management · doi:10.1016/j.enconman.2011.07.009 · Cited by 322
Self-citationNovel thermal management system using mist cooling for lithium-ion battery packs
Saw, L. H., Poon, H. M., Thiam, H. S., Cai, Z., Chong, W. T., Pambudi, N. A., & King, Y. J. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.04.042 · Cited by 314
Zhao, C., Cao, W., Dong, T., & Jiang, F. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.12.083 · Cited by 311
Yan, P., Zheng, J., Chen, T., Luo, L., Jiang, Y., Wang, K., Sui, M., Zhang, J.-G., Zhang, S., & Wang, C. (2018) · Nature Communications · doi:10.1038/s41467-018-04862-w · Cited by 310
Siddique, A. R. M., Mahmud, S., & Heyst, B. V. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.08.094 · Cited by 310
Prevent thermal runaway of lithium-ion batteries with minichannel cooling
Xu, J., Lan, C., Qiao, Y., & Ma, Y. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.08.151 · Cited by 308
Bae, C., Erdonmez, C. K., Halloran, J. W., & Chiang, Y. (2013) · Advanced Materials · doi:10.1002/adma.201204055 · Cited by 307
Wood‐Inspired High‐Performance Ultrathick Bulk Battery Electrodes
Lu, L., Lu, Y., Xiao, Z., Zhang, T., Zhou, F., Ma, T., Ni, Y., Yao, H., Yu, S., & Cui, Y. (2018) · Advanced Materials · doi:10.1002/adma.201706745 · Cited by 304
Battery thermal management system for electric vehicle using heat pipes
Smith, J., Singh, R., Hinterberger, M., & Mochizuki, M. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2018.08.022 · Cited by 303
Effects of overdischarge on performance and thermal stability of a Li-ion cell
Maleki, H., & Howard, J. N. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.03.043 · Cited by 302
Kizilel, R., Lateef, A., Sabbah, R., Farid, M. M., Selman, J. R., & Al-Hallaj, S. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.04.050 · Cited by 301
Wandt, J., Freiberg, A., Thomas, R., Gorlin, Y., Siebel, A., Jung, R., Gasteiger, H. A., & Tromp, M. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta08865a · Cited by 297
Hussain, A., Abidi, I. H., Tso, C. Y., Chan, K. C., Luo, Z., & Chao, C. Y. H. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2017.09.019 · Cited by 293
Lv, Y., Yang, X., Li, X., Zhang, G., Wang, Z., & Yang, C. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.06.058 · Cited by 282
Greco, A., Cao, D., Jiang, X., & Yang, H. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.004 · Cited by 280
Thermal Runaway Triggered by Plated Lithium on the Anode after Fast Charging
Li, Y., Feng, X., Ren, D., Ouyang, M., Lu, L., & Han, X. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b16589 · Cited by 280
Experimental investigation on the feasibility of heat pipe cooling for HEV/EV lithium-ion battery
Tran, T.-H., Harmand, S., Desmet, B., & Filangi, S. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.11.048 · Cited by 279
Huang, Q., Li, X., Zhang, G., Zhang, J., He, F., & Li, Y. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.06.048 · Cited by 276
Hao, M., Li, J., Park, S., Moura, S., & Dames, C. (2018) · Nature Energy · doi:10.1038/s41560-018-0243-8 · Cited by 274
Zhao, J., Lv, P., & Rao, Z. (2017) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2016.11.017 · Cited by 270
Self-citationMohammadian, S. K., & Zhang, Y. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.09.110 · Cited by 269
Battery thermal management by boiling heat-transfer
van Gils, R. W., Danilov, D., Notten, P. H. L., Speetjens, M. F. M., & Nijmeijer, H. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.12.006 · Cited by 266
Wu, W., Yang, X., Zhang, G., Ke, X., Wang, Z., Situ, W., Li, X., & Zhang, J. (2016) · Energy · doi:10.1016/j.energy.2016.07.119 · Cited by 266
Chen, K., Song, M., Wei, W., & Wang, S. (2017) · Energy · doi:10.1016/j.energy.2017.12.110 · Cited by 263
Yoon, C. S., Ryu, H.-H., Park, G.-T., Kim, J.-H., Kim, K.-H., & Sun, Y.-K. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta11346c · Cited by 263
Cui, S., Wei, Y., Liu, T., Deng, W., Hu, Z., Su, Y., Li, H., Li, M., Guo, H., Duan, Y., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501309 · Cited by 259
Putra, N., Ariantara, B., & Pamungkas, R. A. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.01.123 · Cited by 257
Malik, M., Dincer, I., & Rosen, M. A. (2016) · International Journal of Energy Research · doi:10.1002/er.3496 · Cited by 257
Wang, R., Li, X., Wang, Z., & Zhang, H. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.02.037 · Cited by 253
Modeling of passive thermal management for electric vehicle battery packs with PCM between cells
Javani, N., Dincer, I., Naterer, G. F., & Rohrauer, G. L. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.07.037 · Cited by 249
Tuning of Thermal Stability in Layered Li(NixMnyCoz)O2
Zheng, J., Liu, T., Hu, Z., Wei, Y., Song, X., Ren, Y., Wang, W., Rao, M., Lin, Y., Chen, Z., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b07771 · Cited by 249
Influence of operating conditions on the optimum design of electric vehicle battery cooling plates
Jarrett, A., & Kim, I. Y. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.06.114 · Cited by 245
Park, S., & Jung, D. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.11.039 · Cited by 243
Structural and thermodynamic stability of Li4Ti5O12 anode material for lithium-ion battery
Yi, T.-F., Xie, Y., Zhu, Y.-R., Zhu, R.-S., & Shen, H. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.09.020 · Cited by 230
Zhou, H., Zhou, F., Xu, L., Kong, J., & QingxinYang (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.11.116 · Cited by 230
Al-Zareer, M., Dincer, I., & Rosen, M. A. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.07.067 · Cited by 228
Chemical storage of renewable energy
Ager, J. W., & Lapkin, A. A. (2018) · Science · doi:10.1126/science.aat7918 · Cited by 225
A review of novel thermal management systems for batteries
Al-Zareer, M., Dincer, I., & Rosen, M. A. (2018) · International Journal of Energy Research · doi:10.1002/er.4095 · Cited by 224
Malik, M., Dinçer, İ., Rosen, M. A., Mathew, M., & Fowler, M. W. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.10.029 · Cited by 221
Dong, T., Peng, P., & Jiang, F. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.10.024 · Cited by 221
Design of the cell spacings of battery pack in parallel air-cooled battery thermal management system
Chen, K., Chen, Y., Li, Z., Yuan, F., & Wang, S. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.06.131 · Cited by 220
Integrated computation model of lithium-ion battery subject to nail penetration
Liu, B., Yin, S., & Xu, J. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.08.101 · Cited by 219
Friesen, A., Horsthemke, F., Mönnighoff, X., Brunklaus, G., Krafft, R., Börner, M., Risthaus, T., Winter, M., & Schappacher, F. M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.09.120 · Cited by 219
Zheng, S., Wang, L., Feng, X., & He, X. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.12.050 · Cited by 218
Xun, J., Liu, R., & Jiao, K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.095 · Cited by 216
Wang, Q., Rao, Z., Huo, Y., & Wang, S. (2016) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2015.11.005 · Cited by 213
Self-citationReverse layered air flow for Li-ion battery thermal management
Na, X., Kang, H., Wang, T., & Wang, Y. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.07.080 · Cited by 213
Mei, W., Chen, H., Sun, J., & Wang, Q. (2019) · Sustainable Energy & Fuels · doi:10.1039/c8se00503f · Cited by 211
An, Z., Jia, L., Li, X., & Ding, Y. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.02.053 · Cited by 208
Lv, Y., Situ, W., Yang, X., Zhang, G., & Wang, Z. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.02.061 · Cited by 207
Numerical study on the thermal performance of a composite board in battery thermal management system
Yan, J., Wang, Q., Li, K., & Sun, J. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.05.187 · Cited by 202
Liquid cooling based on thermal silica plate for battery thermal management system
Wang, C., Zhang, G., Meng, L., Li, X., Situ, W., Lv, Y., & Rao, M. (2017) · International Journal of Energy Research · doi:10.1002/er.3801 · Cited by 202
Ling, Z., Wen, X., Zhang, Z., Fang, X., & Gao, X. (2018) · Energy · doi:10.1016/j.energy.2017.12.098 · Cited by 202
Structure optimization of parallel air-cooled battery thermal management system
Chen, K., Wang, S., Song, M., & Chen, L. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.04.026 · Cited by 201
Liu, F., Lan, F., & Chen, J. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.108 · Cited by 195
Zheng, Y., Han, X., Lu, L., Li, J., & Ouyang, M. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.09.015 · Cited by 194
Giuliano, M. R., Prasad, A. K., & Advani, S. G. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.05.074 · Cited by 194
Feng, X., He, X., Ouyang, M., Wang, L., Lu, L., Ren, D., & Santhanagopalan, S. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0311816jes · Cited by 194
Correlation of aging and thermal stability of commercial 18650-type lithium ion batteries
Börner, M., Friesen, A., Grützke, M., Stenzel, Y. P., Brunklaus, G., Haetge, J., Nowak, S., Schappacher, F. M., & Winter, M. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.12.041 · Cited by 192
Tran, T.-H., Harmand, S., & Sahut, B. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.04.130 · Cited by 191
Liu, H., Eze, C. M., & Zhao, J. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.07.037 · Cited by 189
Self-citationHe, J., Yang, X., & Zhang, G. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.11.100 · Cited by 188
Mechanism of Thermal Runaway in Lithium-Ion Cells
Galushkin, N. E., Yazvinskaya, N. N., & Galushkin, D. N. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0611807jes · Cited by 185
Thermal behaviour of the lithiated-graphite/electrolyte interface through GC/MS analysis
Gachot, G., Grugeon, S., Eshetu, G. G., Mathiron, D., Ribière, P., Armand, M. B., & Laruelle, S. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.08.016 · Cited by 184
Hosseinzadeh, E., Genieser, R., Worwood, D., Barai, A., Marco, J., & Jennings, P. A. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.02.027 · Cited by 183
Rao, Z., Huo, Y., Liu, X., & Zhang, G. (2015) · Journal of the Energy Institute · doi:10.1016/j.joei.2014.09.006 · Cited by 179
Self-citationTaheri, P., Hsieh, S., & Bahrami, M. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.03.056 · Cited by 178
Jiang, J., Ruan, H., Sun, B., Wang, L., Gao, W., & Zhang, W. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.08.070 · Cited by 174
Wu, W., Wu, W., & Wang, S. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.09.068 · Cited by 169
Abaza, A., Ferrari, S., Wong, H. K., Lyness, C., Moore, A., Weaving, J., Blanco-Martin, M., Dashwood, R., & Bhagat, R. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2018.01.015 · Cited by 169
Investigation of the thermal performance of axial-flow air cooling for the lithium-ion battery pack
Yang, T., Yang, N., Zhang, X., & Li, G. (2016) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2016.05.009 · Cited by 166
Experimental study of an OHP-cooled thermal management system for electric vehicle power battery
Rao, Z., Huo, Y., & Liu, X. (2014) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2014.03.017 · Cited by 162
Self-citationZhu, J., Sun, Z., Wei, X., Dai, H., & Gu, W. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.09.063 · Cited by 159
Mei, W., Chen, H., Sun, J., et al. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.06.075 · Cited by 158
Yuan, C., Wang, Q., Wang, Y., & Zhao, Y. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.02.127 · Cited by 157
Li, K., Yan, J., Chen, H., & Wang, Q. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.12.131 · Cited by 155
An Approach for Designing Thermal Management Systems for Electric and Hybrid Vehicle Battery Packs
Pesaran, A. A., Keyser, M. A., & Burch, S. D. (1999) · University of North Texas Digital Library (University of North Texas) · Cited by 153
Zhang, X., Liu, C., & Rao, Z. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.076 · Cited by 153
Self-citationPanchal, S., Dinçer, İ., Agelin‐Chaab, M., Fraser, R., & Fowler, M. W. (2015) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2015.08.016 · Cited by 150
Farag, M., Sweity, H., Fleckenstein, M., & Habibi, S. R. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.06.031 · Cited by 149
Electrical behavior of overdischarge-induced internal short circuit in lithium-ion cells
Lai, X., Zheng, Y., Zhou, L., & Gao, W. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.05.048 · Cited by 149
Xiao, M., & Choe, S.-Y. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.04.062 · Cited by 145
Cho, J., Jung, Y., Lee, Y., & Kim, D. (2017) · Journal of Membrane Science · doi:10.1016/j.memsci.2017.04.042 · Cited by 145
Xu, M., Hao, L., Liu, Y., Li, W., Xing, L., & Li, B. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp109562u · Cited by 144
Facet-Dependent Thermal Instability in LiCoO2
Sharifi‐Asl, S., Soto, F. A., Nie, A., Yuan, Y., Asayesh‐Ardakani, H., Foroozan, T., Yurkiv, V., Song, B., Mashayek, F., Klie, R. F., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04502 · Cited by 144
Thermal Design for the Pouch-Type Large-Format Lithium-Ion Batteries
Wu, B., Li, Z., & Zhang, J. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0831501jes · Cited by 142
Guo, S., Xiong, R., Wang, K., & Sun, F. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.03.052 · Cited by 142
Ruan, H., Jiang, J., Sun, B., Su, X., He, X., & Zhao, K. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113797 · Cited by 139
Du, S., Lai, Y., Ai, L., Ai, L., Cheng, Y., Tang, Y., & Jia, M. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.04.077 · Cited by 138
Modelling electro-thermal response of lithium-ion batteries from normal to abuse conditions
Ping, P., Wang, Q., Chung, Y. M., & Wen, J. X. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.08.073 · Cited by 138
Experimental study on heat dissipation for lithium-ion battery based on micro heat pipe array (MHPA)
Ye, X., Zhao, Y., & Quan, Z. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.10.141 · Cited by 136
Lammer, M., Königseder, A., & Hacker, V. (2017) · RSC Advances · doi:10.1039/c7ra02635h · Cited by 135
Situ, W., Zhang, G., Li, X., Yang, X., Wei, C., Rao, M., Wang, Z., Wang, C., & Wu, W. (2017) · Energy · doi:10.1016/j.energy.2017.09.083 · Cited by 134
Thermal/electrical modeling for abuse-tolerant design of lithium ion modules
Smith, K. A., Kim, G., Darcy, E. C., & Pesaran, A. A. (2009) · International Journal of Energy Research · doi:10.1002/er.1666 · Cited by 132
Numerical investigation of thermal runaway mitigation through a passive thermal management system
Li, Q., Yang, C., Santhanagopalan, S., Smith, K. A., Lamb, J., Steele, L. A. M., & Torres-Castro, L. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.04.091 · Cited by 127
Worwood, D., Kellner, Q., Wojtala, M., Widanage, W. D., McGlen, R. J., Greenwood, D. G., & Marco, J. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.02.023 · Cited by 124
An alternating current heating method for lithium-ion batteries from subzero temperatures
Zhu, J., Sun, Z., Wei, X., & Dai, H. (2016) · International Journal of Energy Research · doi:10.1002/er.3576 · Cited by 123
Cooling Li-ion batteries of racing solar car by using multiple phase change materials
Moraga, N. O., Xamán, J., & Araya, R. H. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.07.183 · Cited by 121
Jiaqiang, E., Xu, S., Deng, Y., Zhu, H., Zuo, W., Wang, H., Chen, J., Peng, Q., & Zhang, Z. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.09.048 · Cited by 121
Malik, M., Dinçer, İ., Rosen, M. A., & Fowler, M. W. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.10.051 · Cited by 119
Heat transfer and thermal management of electric vehicle batteries with phase change materials
Ramandi, M. Y., Dinçer, İ., & Naterer, G. F. (2011) · Heat and Mass Transfer · doi:10.1007/s00231-011-0766-z · Cited by 114
Experimental and numerical investigation of core cooling of Li-ion cells using heat pipes
Shah, K., McKee, C., Chalise, D., & Jain, A. (2016) · Energy · doi:10.1016/j.energy.2016.07.076 · Cited by 113
Pan, M., & Zhong, Y. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.06.014 · Cited by 111
Xu, X., & He, R. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.08.057 · Cited by 107
Kriston, Á., Pfrang, A., Döring, H., Fritsch, B., Ruiz, V., Adanouj, I., Kosmidou, T., Ungeheuer, J., & Boon-Brett, L. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.06.056 · Cited by 101
Temperature dependent electrochemical performance of graphite anodes for K-ion and Li-ion batteries
Adams, R. A., Varma, A., & Pol, V. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.11.007 · Cited by 100
Mohammadian, S. K., & Zhang, Y. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.02.121 · Cited by 98
Design of Parallel Air-Cooled Battery Thermal Management System through Numerical Study
Chen, K., Li, Z., Chen, Y., et al. (2017) · Energies · doi:10.3390/en10101677 · Cited by 97
Wang, C., Zhang, G., Li, X., Huang, J., Wang, Z., Lv, Y., Meng, L., Situ, W., & Rao, M. (2017) · International Journal of Energy Research · doi:10.1002/er.3916 · Cited by 94
Du, X., Qian, Z., Chen, Z., & Rao, Z. (2018) · International Journal of Energy Research · doi:10.1002/er.4067 · Cited by 93
Self-citationA computational multi-node electro-thermal model for large prismatic lithium-ion batteries
Pan, Y.-W., Hua, Y., Zhou, S., He, R., Zhang, Y., Yang, S., Liu, X., Lian, Y., Yan, X., & Wu, B. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228070 · Cited by 91
Self-citationWang, Z., Li, X., Zhang, G., Lv, Y., Wang, C., He, F., Yang, C., & Yang, C. (2017) · RSC Advances · doi:10.1039/c7ra08181b · Cited by 91
Esho, I., Shah, K., & Jain, A. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.09.016 · Cited by 88
Jiang, L., Luo, Z., Wu, T., et al. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0661906jes · Cited by 87
Neudeck, S., Walther, F., Bergfeldt, T., Suchomski, C., Rohnke, M., Hartmann, P., Janek, J., & Brezesinski, T. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b04405 · Cited by 86
Li, J., Huang, J., & Cao, M. L. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.12.023 · Cited by 83
Bai, Y., Li, L., Li, Y., et al. (2018) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2018.02.016 · Cited by 83
A proof-of-concept graphite anode with a lithium dendrite suppressing polymer coating
Luo, J. L., Wu, C.-E., Su, L.-Y., Huang, S.-S., Fang, C., Wu, Y.-S., Chou, J., & Wu, N. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.10.002 · Cited by 81
Non-dimensional analysis of the criticality of Li-ion battery thermal runaway behavior
Huang, P., Chen, H., Verma, A., Wang, Q., Mukherjee, P. P., & Sun, J. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.01.049 · Cited by 80
Xie, Y. H., Yu, H., Yi, T., & Zhu, Y. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am4054833 · Cited by 77
Thermoelectrochemical simulations of performance and abuse in 50-Ah automotive cells
Kim, S. U., Albertus, P. S., Cook, D. J., Monroe, C. W., & Christensen, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.06.080 · Cited by 73
Reyes-Marambio, J., Moser, F., Gana, F., et al. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.12.037 · Cited by 73
Bertilsson, S., Larsson, F., Furlani, M., Albinsson, I., & Mellander, B. ‐. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.08.082 · Cited by 72
Local Heat Generation in a Single Stack Lithium Ion Battery Cell
Heubner, C., Schneider, M., Lämmel, C., & Michaelis, A. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.10.182 · Cited by 70
Wang, T., Wu, X., Xu, S., Hofmann, H. F., Du, J., Li, J., Ouyang, M., & Song, Z. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.08.093 · Cited by 70
Thermal management system of lithium-ion battery module based on micro heat pipe array
Ye, X., Zhao, Y., & Quan, Z. (2017) · International Journal of Energy Research · doi:10.1002/er.3847 · Cited by 69
Simulation of heat generation in a reconstructed LiCoO2 cathode during galvanostatic discharge
Yan, B., Lim, C., Yin, L., & Zhu, L. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.03.132 · Cited by 68
Rao, Z., & Zhang, X. (2019) · International Journal of Energy Research · doi:10.1002/er.4571 · Cited by 67
Self-citationSheikh, M. A., Elmarakbi, A. M., & Elkady, M. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.10.013 · Cited by 64
Thomas, S., Nam, E. B., & Lee, S. U. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b11476 · Cited by 64
Analytical modeling and optimization of phase change thermal management of a Li-ion battery pack
Parhizi, M., & Jain, A. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.11.017 · Cited by 63
Yamada, T., KOSHIYAMA, T., YOSHIKAWA, M., Yamada, T., & Ono, N. (2017) · Journal of Thermal Science and Technology · doi:10.1299/jtst.2017jtst0011 · Cited by 62
Hong, S., Zhang, X., Wang, S., & Zhang, Z. (2015) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2015.04.003 · Cited by 61
An, Z., Jia, L., Wei, L., & Chengliang, Y. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.07.147 · Cited by 60
Kim, C.-S., Yoo, J. S., Jeong, K., Kim, K., & Yi, C.-W. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.04.010 · Cited by 59
Thermal Management of a Cylindrical Lithium-Ion Battery Module Using a Multichannel Wavy Tube
Tang, Z., Min, X., Song, A., et al. (2018) · Journal of Energy Engineering · doi:10.1061/(asce)ey.1943-7897.0000592 · Cited by 58
The impact of multi-layered porosity distribution on the performance of a lithium ion battery
Hosseinzadeh, E., Marco, J., & Jennings, P. A. (2018) · Applied Mathematical Modelling · doi:10.1016/j.apm.2018.04.001 · Cited by 56
Liu, F., Lan, F., Chen, J., & Li, Y. (2018) · Chinese Journal of Mechanical Engineering · doi:10.1186/s10033-018-0255-0 · Cited by 56
Xie, J., Xie, Y., & Yuan, C. Y. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.10.018 · Cited by 54
Cited by
Ren, D., Feng, X., Liu, L., Hsu, H., Lu, L., Wang, L., He, X., & Ouyang, M. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.10.020 · Cited by 698
Challenges and advances in wide-temperature rechargeable lithium batteries
Feng, Y., Zhou, L., Ma, H., Wu, Z., Zhao, Q., Li, H., Zhang, K., & Chen, J. (2022) · Energy & Environmental Science · doi:10.1039/d1ee03292e · Cited by 517
Advancing energy storage: The future trajectory of lithium-ion battery technologies
Hasan, M. M., Haque, R., Jahirul, M. I., Rasul, M. G., Fattah, I. M. R., Hassan, N. M. S., & Mofijur, M. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.116511 · Cited by 446
Lai, X., Jin, C., Yi, W., Han, X., Feng, X., Zheng, Y., & Ouyang, M. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.11.026 · Cited by 438
Sadeghi, G. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2022.01.017 · Cited by 380
Metadata
- Authors
- Lyu, P., Liu, X., Qu, J., Zhao, J., Huo, Y., Qu, Z., & Rao, Z.
- Venue
- Energy Storage Materials
- Publisher
- Elsevier BV
- Published
- 2020-10
- Volume
- 31
- Pages
- 195-220
- ISSN
- 2405-8289 (ISSN-L)
- 2405-8297
- OpenAlex
- W3040049680
- Cited by
- 624
- References
- 214
- FWCI
- 23.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.