The DOI matches its Crossref record; 125 of the 125 references it cites were found in a registry or an index.
A comprehensive review of future thermal management systems for battery-electrified vehicles
Abstract
Abstract Heat management is an important issue during the operation of a Li-ion battery system resulting from the high sensitivity to temperature. Nowadays, a battery thermal management system (BTMS) is employed to keep the batteries temperature in range. In a modern battery, electrified vehicles (BEVs), two types of cooling systems are employed generally separately: active and passive systems. Nonetheless, the trend in thermal management aims to improve the battery pack design to reach longer autonomy or faster charging time. However, to address these future thermal challenges, future thermal management systems are required instead of the traditional BTMSs such as air cooling or liquid cooling. However, future BTMSs has not yet been documented. Therefore, this study gives an overview of the future BTMS starting with information on the effect of temperature on LiBs in terms of high-temperature, low-temperature and safety issues. Following, the advantages and disadvantages of the existing BTMSs, which are currently used to maintain the temperature of the batteries in a safe range are exposed. Finally, the progress made on the future battery thermal management systems and their ability to overcome the future thermal challenges is reviewed. In the end, a comprehensive review classifying comparatively the existing and upcoming battery management systems is proposed, which can be seen as a first look into the future BTMSs for automotive applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ageing mechanisms in lithium-ion batteries
Vetter, J., Novák, P., Wagner, M. R., Veit, C., Möller, K.-C., Besenhard, J. O., Winter, M., Wohlfahrt-Mehrens, M., Vogler, C., & Hammouche, A. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.01.006 · Cited by 3,987
A critical review of thermal issues in lithium-ion batteries
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515880 · Cited by 2,192
Energy storage technologies and real life applications – A state of the art review
Aneke, M., & Wang, M. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.06.097 · Cited by 1,754
Review on battery thermal management system for electric vehicles
Kim, J., Oh, J., & Lee, H. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.12.020 · Cited by 1,292
A critical review of battery thermal performance and liquid based battery thermal management
Wu, W., Wang, S., Wu, W., Chen, K., Hong, S., & Lai, Y. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.12.051 · Cited by 1,214
Jaguemont, J., Boulon, L., & Dubé, Y. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.11.034 · Cited by 1,188
Self-citationBattery thermal models for hybrid vehicle simulations
Pesaran, A. A. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00200-8 · Cited by 1,116
Wang, Q., Jiang, B., Li, B., & Yan, Y. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.05.033 · Cited by 1,083
A review of thermoelectric cooling: Materials, modeling and applications
Zhao, D., & Tan, G. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.01.074 · Cited by 968
Phase change materials (PCM) for cooling applications in buildings: A review
Souayfane, F., Fardoun, F., & Biwole, P.-H. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.04.006 · Cited by 813
A review of Battery Electric Vehicle technology and readiness levels
Mahmoudzadeh Andwari, A., Pesiridis, A., Rajoo, S., Martinez-Botas, R., & Esfahanian, V. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.03.138 · Cited by 784
Structure and performance of LiFePO4 cathode materials: A review
Zhang, W.-J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.113 · Cited by 743
Ling, Z., Wang, F., Fang, X., Gao, X., & Zhang, Z. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.03.080 · Cited by 726
Wang, T., Tseng, K. J., Zhao, J., & Wei, Z. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.08.013 · Cited by 713
A Novel Thermal Management System for Electric Vehicle Batteries Using Phase-Change Material
Hallaj, S. A., & Selman, J. R. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393888 · Cited by 662
A review on battery thermal management in electric vehicle application
Xia, G., Cao, L., & Bi, G. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.09.046 · Cited by 641
Computational fluid dynamic and thermal analysis of Lithium-ion battery pack with air cooling
Saw, L. H., Ye, Y., Tay, A. A. O., Chong, W. T., Kuan, S. H., & Yew, M. C. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.05.122 · Cited by 527
Study on paraffin/expanded graphite composite phase change thermal energy storage material
Zhang, Z., & Fang, X. (2006) · Energy Conversion and Management · doi:10.1016/j.enconman.2005.03.004 · Cited by 518
Yang, N., Zhang, X., Li, G., & Hua, D. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.01.049 · Cited by 467
Zou, D., Ma, X., Liu, X., Zheng, P., & Hu, Y. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.12.024 · Cited by 461
Chen, K., Wu, W., Fang, Y., Chen, L., & Wang, S. (2018) · Energy · doi:10.1016/j.energy.2018.11.011 · Cited by 460
Phase-change materials (PCM) for automotive applications: a review
Jaguemont, J., Omar, N., Van den Bossche, P., & Mierlo, J. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.12.097 · Cited by 451
Self-citationHu, X., Zheng, Y., Howey, D. A., Perez, H., Foley, A., & Pecht, M. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.100806 · Cited by 443
Electric vehicles batteries thermal management systems employing phase change materials
Ianniciello, L., Biwolé, P. H., & Achard, P. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.12.071 · Cited by 426
Jiaqiang, E., Han, D., Qiu, A., Zhu, H., Deng, Y., Chen, J., Zhao, X., Zuo, W., Wang, H., Chen, J., et al. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.12.115 · Cited by 404
A review of promising candidate reactions for chemical heat storage
Yan, T., Wang, R. Z., Li, T. X., Wang, L. W., & Fred, I. T. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.11.015 · Cited by 386
Jiang, Z. Y., & Qu, Z. G. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.03.043 · Cited by 380
Thermal properties of paraffin based composites containing multi-walled carbon nanotubes
Wang, J., Xie, H., & Xin, Z. (2009) · Thermochimica Acta · doi:10.1016/j.tca.2009.01.022 · Cited by 373
Heat dissipation design for lithium-ion batteries
Wu, M.-S., Liu, K. H., Wang, Y.-Y., & Wan, C.-C. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00048-4 · Cited by 373
Liang, J., Gan, Y., & Li, Y. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.10.063 · Cited by 367
Zhao, R., Zhang, S., Liu, J., & Gu, J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.09.001 · Cited by 343
Experimental investigation on EV battery cooling and heating by heat pipes
Wang, Q., Jiang, B., Xue, Q. F., Sun, H. L., Li, B., Zou, H. M., & Yan, Y. Y. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.09.083 · Cited by 329
Novel thermal management system using mist cooling for lithium-ion battery packs
Saw, L. H., Poon, H. M., Thiam, H. S., Cai, Z., Chong, W. T., Pambudi, N. A., & King, Y. J. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.04.042 · Cited by 314
Siddique, A. R. M., Mahmud, S., & Heyst, B. V. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.08.094 · Cited by 310
Prevent thermal runaway of lithium-ion batteries with minichannel cooling
Xu, J., Lan, C., Qiao, Y., & Ma, Y. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.08.151 · Cited by 308
Battery thermal management system for electric vehicle using heat pipes
Smith, J., Singh, R., Hinterberger, M., & Mochizuki, M. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2018.08.022 · Cited by 303
Hussain, A., Abidi, I. H., Tso, C. Y., Chan, K. C., Luo, Z., & Chao, C. Y. H. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2017.09.019 · Cited by 293
Qin, P., Liao, M., Zhang, D., Liu, Y., Sun, J., & Wang, Q. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.05.084 · Cited by 284
Huang, Y., Mei, P., Lu, Y., Huang, R., Yu, X., Chen, Z., & Roskilly, A. P. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.04.033 · Cited by 277
Huang, Q., Li, X., Zhang, G., Zhang, J., He, F., & Li, Y. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.06.048 · Cited by 276
Shang, Z., Qi, H., Liu, X., Ouyang, C., & Wang, Y. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.10.074 · Cited by 275
Battery thermal management by boiling heat-transfer
van Gils, R. W., Danilov, D., Notten, P. H. L., Speetjens, M. F. M., & Nijmeijer, H. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.12.006 · Cited by 266
Chen, K., Song, M., Wei, W., & Wang, S. (2017) · Energy · doi:10.1016/j.energy.2017.12.110 · Cited by 263
Wang, T., Tseng, K. J., & Zhao, J. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.07.033 · Cited by 259
Fathabadi, H. (2014) · Energy · doi:10.1016/j.energy.2014.04.046 · Cited by 258
Chen, K., Song, M., Wei, W., & Wang, S. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.12.024 · Cited by 251
A review on the air-PCM-TES application for free cooling and heating in the buildings
Iten, M., Liu, S., & Shukla, A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.03.007 · Cited by 226
Thermal management optimization of a prismatic battery with shape-stabilized phase change material
Wu, W., Wu, W., & Wang, S. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.01.062 · Cited by 222
Malik, M., Dinçer, İ., Rosen, M. A., Mathew, M., & Fowler, M. W. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.10.029 · Cited by 221
Hong, S., Zhang, X., Chen, K., & Wang, S. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.09.092 · Cited by 218
Lu, Z., Yu, X., Wei, L., Qiu, Y., Zhang, L., Meng, X., & Jin, L. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.02.080 · Cited by 217
Mehrabi-Kermani, M., Houshfar, E., & Ashjaee, M. (2019) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2019.03.026 · Cited by 217
A review on thermal conductivity enhancement of paraffinwax as latent heat energy storage material
Bose, P., & Amirtham, V. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.06.071 · Cited by 211
Wang, J., Gan, Y., Liang, J., Tan, M., & Li, Y. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.02.036 · Cited by 209
An, Z., Jia, L., Li, X., & Ding, Y. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.02.053 · Cited by 208
Lv, Y., Situ, W., Yang, X., Zhang, G., & Wang, Z. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.02.061 · Cited by 207
Ling, Z., Cao, J., Zhang, W., Zhang, Z., Fang, X., & Gao, X. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.06.143 · Cited by 205
Zou, D., Liu, X., He, R., Zhu, S., Bao, J., Guo, J., Hu, Z., & Wang, B. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.11.064 · Cited by 204
Song, L., Zhang, H., & Yang, C. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.12.157 · Cited by 201
Chen, S., Peng, X., Bao, N., & Garg, A. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.04.089 · Cited by 199
A surrogate thermal modeling and parametric optimization of battery pack with air cooling for EVs
Li, W., Xiao, M., Peng, X., Garg, A., & Gao, L. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.10.060 · Cited by 198
Alptekin, E. (2017) · Energy · doi:10.1016/j.energy.2016.12.069 · Cited by 197
Recent developments of lightweight, high performance heat pipes
Yang, X., Yan, Y., & Mullen, D. (2011) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2011.09.006 · Cited by 186
Feng, L., Zhou, S., Li, Y., Wang, Y., Zhao, Q., Luo, C., Wang, G., & Yan, K. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2018.01.001 · Cited by 182
Abdel-Monem, M., Trad, K., Omar, N., Hegazy, O., Van den Bossche, P., & Van Mierlo, J. (2017) · Energy · doi:10.1016/j.energy.2016.12.110 · Cited by 177
Self-citationComprehensive Modeling of Vehicle Air Conditioning Loads Using Heat Balance Method
Fayazbakhsh, M. A., & Bahrami, M. (2013) · SAE Technical Paper Series · doi:10.4271/2013-01-1507 · Cited by 170
Advances in Battery Technologies for Electric Vehicles
(2015) · Elsevier eBooks · doi:10.1016/c2014-0-02665-2 · Cited by 168
Huo, Y., & Rao, Z. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.07.128 · Cited by 167
Optimization of thermal management system for Li-ion batteries using phase change material
Li, Y., Du, Y., Xu, T., Wu, H., Zhou, X., Ling, Z., & Zhang, Z. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.12.055 · Cited by 164
Zhang, X., Kong, X., Li, G., & Li, J. (2014) · Energy · doi:10.1016/j.energy.2013.10.088 · Cited by 162
A Review of Lithium-Ion Battery Thermal Management System Strategies and the Evaluate Criteria
Yang, S., Ling, C., Fan, Y., Yang, Y., Tan, X., & Dong, H. (2019) · International Journal of Electrochemical Science · doi:10.20964/2019.07.06 · Cited by 155
An Approach for Designing Thermal Management Systems for Electric and Hybrid Vehicle Battery Packs
Pesaran, A. A., Keyser, M. A., & Burch, S. D. (1999) · University of North Texas Digital Library (University of North Texas) · Cited by 153
Zhang, X., Liu, C., & Rao, Z. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.076 · Cited by 153
Thermal modeling of full-size-scale cylindrical battery pack cooled by channeled liquid flow
Cao, W., Zhao, C., Wang, Y., Dong, T., & Jiang, F. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.04.137 · Cited by 152
Li, X., He, F., Zhang, G., Huang, Q., & Zhou, D. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.10.061 · Cited by 150
Exploring the efficacy of nanofluids for lithium-ion battery thermal management
Mondal, B., Lopez, C. F., & Mukherjee, P. P. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.04.130 · Cited by 148
He, F., Li, X., Zhang, G., Zhong, G., & He, J. (2018) · International Journal of Energy Research · doi:10.1002/er.4081 · Cited by 148
Zou, H., Wang, W., Zhang, G., Qin, F., Tian, C., & Yan, Y. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.03.066 · Cited by 145
Thermal Management of Electric Vehicle Battery Systems
Dinçer, İ., Hamut, H. S., & Javani, N. (2016) · Wiley eBooks · doi:10.1002/9781118900239 · Cited by 142
Goutam, S., Timmermans, J.-M., Omar, N., den Bossche, P. V., & Mierlo, J. V. (2015) · Energies · doi:10.3390/en8088175 · Cited by 141
Yüksel, T., Litster, S., Viswanathan, V., & Michalek, J. J. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.10.104 · Cited by 141
박성기, Jang, D. S., Lee, D., Hong, S. H., & Kim, Y. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.01.109 · Cited by 138
Wang, X., Xie, Y., Day, R., Wu, H., Hu, Z., Zhu, J., & Wen, D. (2018) · Energy · doi:10.1016/j.energy.2018.05.104 · Cited by 137
Experimental study on heat dissipation for lithium-ion battery based on micro heat pipe array (MHPA)
Ye, X., Zhao, Y., & Quan, Z. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.10.141 · Cited by 136
Optimization design and numerical study on water cooling structure for power lithium battery pack
Tang, A., Li, J., Lou, L., Shan, C., & Yuan, X. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.113760 · Cited by 129
Active cooling based battery thermal management using composite phase change materials
Zhao, Y., Zou, B., Li, C. S., & Ding, Y. (2019) · Energy Procedia · doi:10.1016/j.egypro.2019.01.697 · Cited by 122
Heat and mass transfer modeling and assessment of a new battery cooling system
Al‐Zareer, M., Dinçer, İ., & Rosen, M. A. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.04.157 · Cited by 121
Wang, S., Li, K., Tian, Y., Wang, J., Wu, Y., & Ji, S. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.02.061 · Cited by 120
Xu, X., Li, W., Xu, B. L., & Qin, J. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.04.180 · Cited by 118
Qu, J., Wang, C., Li, X., & Wang, H. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.02.045 · Cited by 105
Lv, Y., Yang, X., Zhang, G., & Li, X. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.07.037 · Cited by 98
Jung, D. Y., Lee, B. H., & Kim, S. W. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00020-4 · Cited by 95
Wang, C., Zhang, G., Li, X., Huang, J., Wang, Z., Lv, Y., Meng, L., Situ, W., & Rao, M. (2017) · International Journal of Energy Research · doi:10.1002/er.3916 · Cited by 94
Du, X., Qian, Z., Chen, Z., & Rao, Z. (2018) · International Journal of Energy Research · doi:10.1002/er.4067 · Cited by 93
Qu, J., Ke, Z., Zuo, A., & Rao, Z. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.10.019 · Cited by 90
Experimental investigation of a novel hybrid cooling method for lithium-ion batteries
Wei, Y., & Agelin‐Chaab, M. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.03.024 · Cited by 85
Lari, M. O., & Şahin, A. Z. (2018) · Renewable Energy · doi:10.1016/j.renene.2018.01.034 · Cited by 83
Thermal charging performance of enhanced phase change material composites for thermal battery design
Mallow, A., Abdelaziz, O. A., & Graham, S. L. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2017.12.027 · Cited by 82
Li, X., Zhou, D., Zhang, G., Wang, C., Lin, R., & Zhong, Z. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.04.007 · Cited by 82
Huang, P., Verma, A., Robles, D. J., Wang, Q., Mukherjee, P. P., & Sun, J. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.12.121 · Cited by 78
Cai, Y., Song, L., He, Q., Yang, D., & Hu, Y. Z. (2008) · Energy Conversion and Management · doi:10.1016/j.enconman.2008.02.013 · Cited by 77
Comparison of cooling plate configurations for automotive battery pack thermal management
Darcovich, K., MacNeil, D. D., Recoskie, S., Cadic, Q., & Ilinca, F. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.03.146 · Cited by 77
Cold temperature performance of phase change material based battery thermal management systems
Ghadbeigi, L., Day, B. C., Lundgren, K., & Sparks, T. D. (2018) · Energy Reports · doi:10.1016/j.egyr.2018.04.001 · Cited by 75
Zheng, Y., Shi, Y., & Huang, Y. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.10.090 · Cited by 74
Koyama, R., Arai, Y., Yamauchi, Y., Takeya, S., Endo, F., Hotta, A., & Ohmura, R. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.04.055 · Cited by 70
Thermal management system of lithium-ion battery module based on micro heat pipe array
Ye, X., Zhao, Y., & Quan, Z. (2017) · International Journal of Energy Research · doi:10.1002/er.3847 · Cited by 69
Rao, Z., & Zhang, X. (2019) · International Journal of Energy Research · doi:10.1002/er.4571 · Cited by 67
Thermal Management of a Hybrid Electric Vehicle in Cold Weather
Jaguemont, J., Boulon, L., Dubé, Y., & Martel, F. (2016) · IEEE transactions on energy conversion · doi:10.1109/tec.2016.2553700 · Cited by 66
Self-citationOmar, N., den Bossche, P. V., Mulder, G., Daowd, M. A. A. H., Timmermans, J.-M., Mierlo, J. V., & Pauwels, S. (2011) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2011.6043017 · Cited by 65
Neto, R. D. O., Sotomonte, C. A. R., Coronado, C. J. R., & Nascimento, M. A. R. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.10.012 · Cited by 61
Jaguemont, J., Omar, N., Abdel-Monem, M., den Bossche, P. V., & Mierlo, J. V. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.09.068 · Cited by 61
Self-citationLiu, F., Lan, F., Chen, J., & Li, Y. (2018) · Chinese Journal of Mechanical Engineering · doi:10.1186/s10033-018-0255-0 · Cited by 56
Arora, S., Kapoor, A., & Shen, W. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.12.030 · Cited by 55
Zhang, C., Chen, S.-R., Gao, H., Xu, K.-J., Xia, Z., & Li, S.-T. (2019) · Energies · doi:10.3390/en12101937 · Cited by 54
de Hoog, J., Jaguemont, J., Abdel-Monem, M., den Bossche, P. V., Mierlo, J. V., & Omar, N. (2018) · Energies · doi:10.3390/en11040804 · Cited by 47
Self-citationPlate flat heat pipe and liquid-cooled coupled multistage heat dissipation system of Li-ion battery
Xu, X., Tang, W., Fu, J., Li, R., & Sun, X. (2018) · International Journal of Energy Research · doi:10.1002/er.4341 · Cited by 47
Liao, X., Ma, C., Peng, X., Garg, A., & Bao, N. (2019) · Journal of Electrochemical Energy Conversion and Storage · doi:10.1115/1.4042922 · Cited by 47
Passive/Active BTMS For EV Lithium-Ion Batteries
Alaoui, C. (2018) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2018.2791359 · Cited by 43
Thermal Management of Electric Vehicle Batteries Using Heat Pipe and Phase Change Materials
Amin, M., Ariantara, B., Putra, N. S. D., Sandi, A. F., & Abdullah, N. A. (2018) · E3S Web of Conferences · doi:10.1051/e3sconf/20186703034 · Cited by 32
Gillet, T., Andrès, E., El-Bakkali, A., et al. (2018) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2018.04.004 · Cited by 31
Battery thermal management system
Cosley, M. R., & Garcia, M. P. (2005) · International Workshop on Computational Electronics · doi:10.1109/intlec.2004.1401442 · Cited by 31
Energy consumption of battery cooling in hybrid electric vehicles
Krüger, I., Limperich, D., & Schmitz, G. (2012) · Purdue e-Pubs (Purdue University System) · Cited by 30
Leman, A. M., Rahman, F., Jajuli, A., Zakaria, S., & Feriyanto, D. (2016) · MATEC Web of Conferences · doi:10.1051/matecconf/20178702021 · Cited by 17
Hata, H., Wada, S., Yamada, T., Hirata, K., YAMADA, T., & Ono, N. (2018) · Journal of Thermal Science and Technology · doi:10.1299/jtst.2018jtst0024 · Cited by 17
Lo, J. (2013) · UWSpace (University of Waterloo) · Cited by 11
Cited by
A review on thermal management of lithium-ion batteries for electric vehicles
Zhang, X., Li, Z., Luo, L., Fan, Y., & Du, Z. (2022) · Energy · doi:10.1016/j.energy.2021.121652 · Cited by 1,097
A review on recent progress, challenges and perspective of battery thermal management system
Lin, J., Liu, X., Li, S., Zhang, C., & Yang, S. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120834 · Cited by 588
Zhao, G., Wang, X., Negnevitsky, M., & Li, C. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.119626 · Cited by 395
Developments in battery thermal management systems for electric vehicles: A technical review
Tete, P. R., Gupta, M. M., & Joshi, S. S. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102255 · Cited by 388
Sadeghi, G. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2022.01.017 · Cited by 380
Metadata
- Authors
- Jaguemont, J., & Van Mierlo, J.
- Venue
- Journal of Energy Storage
- Publisher
- Elsevier BV
- Published
- 2020-10
- Volume
- 31
- Pages
- 101551
- ISSN
- 2352-152X (ISSN-L)
- OpenAlex
- W3033501160
- Cited by
- 304
- References
- 125
- FWCI
- 14.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.