The DOI matches its Crossref record; 151 of the 151 references it cites were found in a registry or an index.
Additive manufacturing of Ti–6Al–4V parts through laser metal deposition (LMD): Process, microstructure, and mechanical properties
Abstract
As one of the most important additive manufacturing (AM) techniques, laser metal deposition (LMD) has been extensively studied specially during the last few years. Similar to other AM techniques, the quality of LMD parts is highly dependent on the processing parameters that need to be optimized so as to obtain geometrically accurate parts as well as favorable microstructures and, thus, mechanical properties. The present review paper therefore aims to present a critical analysis and overview of the relationship between processing parameters, microstructure, and mechanical properties of LMD components made from the Ti–6Al–4V alloy. Moreover, we discuss the applications of LMD parts in the aerospace and biomedical industries as well as the potential of LMD techniques for fabrication of more complex parts such as cellular structures. The paper concludes with a summary of the most important findings and suggestions for future research.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Scaffolds in tissue engineering bone and cartilage
Hutmacher, D. W. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00121-6 · Cited by 4,994
Foam Structures with a Negative Poisson's Ratio
Lakes, R. (1987) · Science · doi:10.1126/science.235.4792.1038 · Cited by 3,866
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
Materials Properties Handbook: Titanium Alloys
Boyer, R. R., Welsch, G. E., & Collings, E. W. (1994) · Medical Entomology and Zoology · Cited by 2,637
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O’Donoghue, L., & Charitidis, C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.001 · Cited by 2,136
Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
Vrancken, B., Thijs, L., Kruth, J.-P., & Van Humbeeck, J. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2012.07.022 · Cited by 1,896
The mechanics of three-dimensional cellular materials
Gibson, I. J., & Ashby, M. F. (1982) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0088 · Cited by 1,885
Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
King, W. E., Barth, H. D., Castillo, V. M., Gallegos, G. F., Gibbs, J. W., Hahn, D. E., Kamath, C., & Rubenchik, A. M. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.06.005 · Cited by 1,616
Recent metallic materials for biomedical applications
Niinomi, M. (2002) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-002-0109-2 · Cited by 1,508
Carroll, B. E., Palmer, T. A., & Beese, A. M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.12.054 · Cited by 1,507
Mohamed, O. A., Masood, S. H., & Bhowmik, J. L. (2015) · Advances in Manufacturing · doi:10.1007/s40436-014-0097-7 · Cited by 1,481
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Everton, S. K., Hirsch, M., Stravroulakis, P., Leach, R. K., & Clare, A. T. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.099 · Cited by 1,469
Influence of processing on microstructure and mechanical properties of (α+β) titanium alloys
Lütjering, G. (1998) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(97)00778-8 · Cited by 1,461
Fabrication methods of porous metals for use in orthopaedic applications
Ryan, G., Pandit, A., & Apatsidis, D. P. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.12.002 · Cited by 1,391
Vilaro, T., Colin, C., & Bartout, J. D. (2011) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-011-0731-y · Cited by 1,283
Metamaterials: Physics and Engineering Explorations
Engheta, N., & Ziolkowski, R. W. (2006) · SDÜ Bilgi Merkezi · Cited by 1,255
Phase transformations during cooling in α+β titanium alloys
Ahmed, T., & Rack, H. J. (1998) · Materials Science and Engineering A · doi:10.1016/s0921-5093(97)00802-2 · Cited by 1,224
Thompson, S. M., Bian, L., Shamsaei, N., & Yadollahi, A. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.001 · Cited by 1,179
Materials for additive manufacturing
Bourell, D., Kruth, J. P., Leu, M., Levy, G., Rosen, D., Beese, A. M., & Clare, A. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.05.009 · Cited by 1,034
Murr, L. E., Quinones, S. A., Gaytan, S. M., Lopez, M. I., Rodela, A., Martinez, E. Y., Hernandez, D. H., Martinez, E., Medina, F., & Wicker, R. B. (2009) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2008.05.004 · Cited by 997
Mechanical Metamaterials and Their Engineering Applications
Surjadi, J. U., Gao, L., Du, H., Li, X., Xiong, X., Fang, N. X., & Lu, Y. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201800864 · Cited by 982
Sing, S. L., An, J., Yeong, W. Y., & Wiria, F. E. (2016) · Journal of Orthopaedic Research · doi:10.1002/jor.23075 · Cited by 942
Fatigue performance evaluation of selective laser melted Ti–6Al–4V
Edwards, P., & Ramulu, M. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.01.041 · Cited by 874
Multiscale metallic metamaterials
Zheng, X., Smith, W., Jackson, J., Moran, B., Cui, H., Chen, D., Ye, J., Fang, N., Rodriguez, N., Weisgraber, T., et al. (2016) · Nature Materials · doi:10.1038/nmat4694 · Cited by 870
Dinda, G. P., Dasgupta, A. K., & Mazumder, J. (2009) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.01.009 · Cited by 858
Kasperovich, G., Haubrich, J., Gussone, J., & Requena, G. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.070 · Cited by 818
Heinl, P., Müller, L., Körner, C., Singer, R. F., & Müller, F. A. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.03.013 · Cited by 815
On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting
Scipioni Bertoli, U., Wolfer, A. J., Matthews, M. J., Delplanque, J.-P. R., & Schoenung, J. M. (2017) · Materials & Design · doi:10.1016/j.matdes.2016.10.037 · Cited by 796
Fundamental aspects of hot isostatic pressing: An overview
Atkinson, H. V., & Davies, S. (2000) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-000-0078-2 · Cited by 784
Van Bael, S., Chai, Y. C., Truscello, S., Moesen, M., Kerckhofs, G., Van Oosterwyck, H., Kruth, J.-P., & Schrooten, J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.04.001 · Cited by 766
Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V
Wang, F., Williams, S., Colegrove, P., & Antonysamy, A. A. (2013) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-012-1444-6 · Cited by 737
Zhu, B., Xia, P., Li, Y., Ho, W., & Yu, J. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2016.07.104 · Cited by 729
Three-dimensional broadband omnidirectional acoustic ground cloak
Zigoneanu, L., Popa, B.-I., & Cummer, S. A. (2014) · Nature Materials · doi:10.1038/nmat3901 · Cited by 617
Comprehensive Materials Processing
(2014) · Elsevier eBooks · doi:10.1016/c2009-1-63473-0 · Cited by 611
Baufeld, B., der Biest, O. V., & Gault, R. (2009) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2009.11.032 · Cited by 601
Study of corrosion in biocompatible metals for implants: A review
Manam, N. S., Harun, W. S. W., Shri, D. N. A., Ghani, S. A. C., Kurniawan, T., Ismail, M. H., & Ibrahim, M. H. I. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.01.196 · Cited by 597
Yuan, L., Ding, S., & Wen, C. (2019) · Bioactive Materials · doi:10.1016/j.bioactmat.2018.12.003 · Cited by 593
Wang, T., Zhu, Y. Y., Zhang, S. Q., Tang, H., & Wang, H. M. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.01.256 · Cited by 557
Li, P., Warner, D. H., Fatemi, A., & Phan, N. (2016) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2015.12.003 · Cited by 546
Baufeld, B., Brandl, E., & der Biest, O. V. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2011.01.018 · Cited by 537
Lütjering, G., & Williams, J. C. (2003) · Engineering Materials and Processes · doi:10.1007/978-3-540-71398-2 · Cited by 528
Ziętala, M., Durejko, T., Polański, M., Kunce, I., Płociński, T., Zieliński, W., Łazińska, M., Stępniowski, W. J., Czujko, T., Kurzydłowski, K. J., et al. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.09.028 · Cited by 523
Bone tissue regeneration: the role of scaffold geometry
Zadpoor, A. A. (2015) · Biomaterials Science · doi:10.1039/c4bm00291a · Cited by 518
Self-citationAdvances in negative Poisson's ratio materials
Lakes, R. (1993) · Advanced Materials · doi:10.1002/adma.19930050416 · Cited by 500
Zadpoor, A. A. (2016) · Materials Horizons · doi:10.1039/c6mh00065g · Cited by 492
Self-citationLightweight Mechanical Metamaterials with Tunable Negative Thermal Expansion
Wang, Q., Jackson, J. A., Ge, Q., Hopkins, J. B., Spadaccini, C. M., & Fang, N. X. (2016) · Physical Review Letters · doi:10.1103/physrevlett.117.175901 · Cited by 481
Fatigue life of additively manufactured Ti–6Al–4V in the very high cycle fatigue regime
Günther, J., Krewerth, D., Lippmann, T., Leuders, S., Tröster, T., Weidner, A., Biermann, H., & Niendorf, T. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.05.018 · Cited by 475
Additive Manufacturing of Biomaterials, Tissues, and Organs
Zadpoor, A. A., & Malda, J. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1719-y · Cited by 462
Self-citationHeigel, J. C., Michaleris, P., & Reutzel, E. W. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2014.10.003 · Cited by 438
Microstructures of laser-deposited Ti–6Al–4V
Wu, X., Liang, J., Mei, J., Mitchell, C., Goodwin, P. S., & Voice, W. (2004) · Materials & Design · doi:10.1016/j.matdes.2003.09.009 · Cited by 436
Kelly, S. M., & Kampe, S. L. (2004) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-004-0094-8 · Cited by 423
de Formanoir, C., Michotte, S., Rigo, O., Germain, L., & Godet, S. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.11.052 · Cited by 404
Szost, B. A., Terzi, S., Martina, F., Boisselier, D., Prytuliak, A., Pirling, T., Hofmann, M., & Jarvis, D. J. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.09.115 · Cited by 393
Fatigue performance of additive manufactured TiAl6V4 using electron and laser beam melting
Greitemeier, D., Palm, F., Syassen, F., & Melz, T. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.05.001 · Cited by 385
Fatigue behavior and failure mechanisms of direct laser deposited Ti–6Al–4V
Sterling, A. J., Torries, B., Shamsaei, N., Thompson, S. M., & Seely, D. W. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.12.026 · Cited by 372
Fatigue behavior of porous biomaterials manufactured using selective laser melting
Amin Yavari, S., Wauthle, R., van der Stok, J., Riemslag, A. C., Janssen, M., Mulier, M., Kruth, J. P., Schrooten, J., Weinans, H., & Zadpoor, A. A. (2013) · Materials Science and Engineering: C · doi:10.1016/j.msec.2013.08.006 · Cited by 357
Self-citationHrabe, N., Gnäupel-Herold, T., & Quinn, T. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.04.022 · Cited by 355
Brandl, E., Baufeld, B., Leyens, C., & Gault, R. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.087 · Cited by 348
Topology Optimization for Additive Manufacturing
Brackett, D., Ashcroft, I., & Hague, R. (2011) · doi:10.26153/tsw/15300 · Cited by 347
A Survey of Modeling of Lattice Structures Fabricated by Additive Manufacturing
Dong, G., Tang, Y., & Zhao, Y. F. (2017) · Journal of Mechanical Design · doi:10.1115/1.4037305 · Cited by 337
Brandl, E., Schoberth, A., & Leyens, C. (2012) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.10.095 · Cited by 327
Van Hooreweder, B., Apers, Y., Lietaert, K., & Kruth, J.-P. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.10.005 · Cited by 318
The laser additive manufacture of Ti-6Al-4V
Kobryn, P. A., & Semiatin, S. L. (2001) · JOM · doi:10.1007/s11837-001-0068-x · Cited by 304
Fabrication of large Ti–6Al–4V structures by direct laser deposition
Qiu, C., Ravi, G. A., Dance, C., Ranson, A., Dilworth, S., & Attallah, M. M. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.12.234 · Cited by 304
Microstructural evolution in laser-deposited multilayer Ti-6Al-4V builds: Part II. Thermal modeling
Kelly, S. M., & Kampe, S. L. (2004) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-004-0095-7 · Cited by 302
Direct materials deposition: designed macro and microstructure
Mazumder, J., Schifferer, A., & Choi, J. (1999) · Materials Research Innovations · doi:10.1007/s100190050137 · Cited by 302
Omar, O. M., MOHAMED, M., SyedH., Masood, ., & Bhowmik (2015) · Acta Scientiarum Naturalium Universitatis Sunyatseni · Cited by 302
Design for Additive Manufacturing of Cellular Structures
Chu, C., Graf, G., & Rosen, D. W. (2008) · Computer-Aided Design and Applications · doi:10.3722/cadaps.2008.686-696 · Cited by 300
Fabrication of Ti-6Al-4V Scaffolds by Direct Metal Deposition
Dinda, G. P., Song, L., & Mazumder, J. (2008) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-008-9634-y · Cited by 288
Tensile Properties and Microstructures of Laser-Formed Ti-6Al-4V
Alcisto, J., Enriquez, A., Garcia, H., Hinkson, S., Steelman, T., Silverman, E. M., Valdovino, P., Gigerenzer, H., Foyos, J., Ogren, J. R., et al. (2010) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-010-9670-9 · Cited by 284
Proceedings of the 13th World Conference on Titanium
Warchomicka, F., Zehetner, E., Poletti, C., et al. (2016) · Wiley eBooks · doi:10.1002/9781119296126 · Cited by 270
Microdrop Printing of Hydrogel Bioinks into 3D Tissue‐Like Geometries
Pataky, K., Braschler, T., Negro, A., Renaud, P., Lutolf, M. P., & Brugger, J. (2012) · Advanced Materials · doi:10.1002/adma.201102800 · Cited by 267
Zhang, P., Toman, J., Yu, Y., Biyikli, E., Kırca, M., Chmielus, M., & To, A. C. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028724 · Cited by 248
Zhang, J., Wang, X., Paddea, S., & Zhang, X. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.10.141 · Cited by 248
Yang, Q., Zhang, P., Cheng, L., Min, Z., Chyu, M., & To, A. C. (2016) · Additive Manufacturing · doi:10.1016/j.addma.2016.06.012 · Cited by 242
Mitigation of thermal distortion during additive manufacturing
Mukherjee, T., Manvatkar, V., De, A., & DebRoy, T. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.09.001 · Cited by 241
Brandl, E., Palm, F., Michailov, V., Viehweger, B., & Leyens, C. (2011) · Materials & Design · doi:10.1016/j.matdes.2011.06.062 · Cited by 230
Laser Metal Deposition as Repair Technology for Stainless Steel and Titanium Alloys
Graf, B., Gumenyuk, A., & Rethmeier, M. (2012) · Physics Procedia · doi:10.1016/j.phpro.2012.10.051 · Cited by 218
van Hengel, I. A. J., Riool, M., Fratila-Apachitei, L. E., Witte-Bouma, J., Farrell, E., Zadpoor, A. A., Zaat, S. A. J., & Apachitei, I. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.02.030 · Cited by 216
Self-citationChern, A. H., Nandwana, P., Yuan, T., Kirka, M. M., Dehoff, R. R., Liaw, P. K., & Duty, C. E. (2019) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2018.09.022 · Cited by 216
High Cycle Fatigue (HCF) Performance of Ti-6Al-4V Alloy Processed by Selective Laser Melting
Wycisk, E., Emmelmann, C., Siddique, S., & Walther, F. (2013) · Advanced Materials Research · doi:10.4028/www.scientific.net/amr.816-817.134 · Cited by 215
A review of powdered additive manufacturing techniques for Ti-6al-4v biomedical applications
Harun, W. S. W., Manam, N. S., Kamariah, M. S. I. N., Sharif, S., Zulkifly, A. H., Ahmad, I., & Miura, H. (2018) · Powder Technology · doi:10.1016/j.powtec.2018.03.010 · Cited by 211
Bordin, A., Sartori, S., Bruschi, S., & Ghiotti, A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.09.209 · Cited by 210
Residual stresses in laser direct metal deposited Waspaloy
Moat, R. J., Pinkerton, A. J., Li, L., Withers, P. J., & Preuß, M. (2010) · Materials Science and Engineering A · doi:10.1016/j.msea.2010.12.010 · Cited by 207
Marchese, G., Colera, X. G., Calignano, F., Lorusso, M., Biamino, S., Minetola, P., & Manfredi, D. (2016) · Advanced Engineering Materials · doi:10.1002/adem.201600635 · Cited by 202
Self-citationMok, S. H., Bi, G., Folkes, J., & Pashby, I. R. (2008) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2008.02.008 · Cited by 196
Influence of microstructure on mechanical properties of laser metal wire-deposited Ti-6Al-4V
Åkerfeldt, P., Antti, M., & Pederson, R. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.07.038 · Cited by 196
Paydas, H., Mertens, A., Carrus, R., Lecomte-Beckers, J., & Tchoufang Tchuindjang, J. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.07.035 · Cited by 194
(2015) · Johnson Matthey Technology Review · doi:10.1595/205651315x688406 · Cited by 191
Deposition of Ti–6Al–4V using laser and wire, part I: Microstructural properties of single beads
Brandl, E., Michailov, V., Viehweger, B., & Leyens, C. (2011) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2011.07.095 · Cited by 187
Mechanical properties of Ti-6Al-4V specimens produced by shaped metal deposition
Baufeld, B., & van der Biest, O. (2009) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/10/1/015008 · Cited by 186
Wolff, S. J., Lin, S., Faierson, E. J., Liu, W. K., Wagner, G. J., & Cao, J. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.04.027 · Cited by 185
The role of process variables in laser-based direct metal solid freeform fabrication
Beuth, J., & Klingbeil, N. (2001) · JOM · doi:10.1007/s11837-001-0067-y · Cited by 180
Oxygen effects on the mechanical properties and lattice strain of Ti and Ti-6Al-4V
Oh, J. M., Lee, B. G., Cho, S. W., Lee, S. W., Choi, G. S., & Lim, J. W. (2011) · Metals and Materials International · doi:10.1007/s12540-011-1006-2 · Cited by 178
Shunmugavel, M., Polishetty, A., & Littlefair, G. (2015) · Procedia Technology · doi:10.1016/j.protcy.2015.07.037 · Cited by 175
Kistler, N. A., Corbin, D. J., Nassar, A. R., Reutzel, E. W., & Beese, A. M. (2018) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2018.08.041 · Cited by 175
Keist, J. S., & Palmer, T. A. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.045 · Cited by 173
Zadpoor, A. (2017) · International Journal of Molecular Sciences · doi:10.3390/ijms18081607 · Cited by 172
Self-citationMechanical Properties and Microstructural Features of Direct Laser-Deposited Ti-6Al-4V
Bian, L., Thompson, S. M., & Shamsaei, N. (2015) · JOM · doi:10.1007/s11837-015-1308-9 · Cited by 170
Weißmann, V., Bader, R., Hansmann, H., & Laufer, N. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.095 · Cited by 170
Structurally Efficient Three-dimensional Metamaterials with Controllable Thermal Expansion
Xu, H., & Pasini, D. (2016) · Scientific Reports · doi:10.1038/srep34924 · Cited by 153
Lin, J., Lv, Y., Liu, Y., Sun, Z., Wang, K., Li, Z., Wu, Y., & Xu, B. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.12.015 · Cited by 149
Anisotropic high cycle fatigue behavior of Ti–6Al–4V obtained by powder bed laser fusion
Nicoletto, G. (2016) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.04.032 · Cited by 146
Additively manufactured metallic pentamode meta-materials
Hedayati, R., Leeflang, A. M., & ZADPOOR, A. A. (2017) · Applied Physics Letters · doi:10.1063/1.4977561 · Cited by 145
Self-citationZhai, Y., Galarraga, H., & Lados, D. A. (2015) · Procedia Engineering · doi:10.1016/j.proeng.2015.08.007 · Cited by 144
Li, P., Guo, W., Huang, W., Su, Y., Lin, X., & Yuan, K. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.08.043 · Cited by 140
Shah, K., Pinkerton, A. J., Salman, A., & Li, L. (2010) · Materials and Manufacturing Processes · doi:10.1080/10426914.2010.480999 · Cited by 132
Mechanical Properties of Additive Manufactured Ti-6Al-4V Using Wire and Powder Based Processes
Brandl, E., Leyens, C., & Palm, F. (2011) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/26/1/012004 · Cited by 131
Shape-matching soft mechanical metamaterials
Mirzaali, M. J., Janbaz, S., Strano, M., Vergani, L. M., & ZADPOOR, A. A. (2018) · Scientific Reports · doi:10.1038/s41598-018-19381-3 · Cited by 130
Self-citationLietaert, K., Cutolo, A., Boey, D., et al. (2018) · Scientific Reports · doi:10.1038/s41598-018-23414-2 · Cited by 126
Microstructure of additive layer manufactured Ti–6Al–4V after exceptional post heat treatments
Brandl, E., & Greitemeier, D. (2012) · Materials Letters · doi:10.1016/j.matlet.2012.04.116 · Cited by 121
Numerical modeling of the thermal behavior during the LENS® process
Ye, R., Smugeresky, J. E., Zheng, B., et al. (2006) · Materials Science and Engineering A · doi:10.1016/j.msea.2006.04.079 · Cited by 120
Relationship between osseointegration and superelastic biomechanics in porous NiTi scaffolds
Liu, X., Wu, S., Yeung, K., Chan, Y., Hu, T., Xu, Z., Liu, X., Chung, J. C. Y., Cheung, K., & Chu, P. K.-H. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.08.102 · Cited by 119
Biswas, N., Ding, J., Balla, V. K., Field, D. P., & Bandyopadhyay, A. K. (2012) · Materials Science and Engineering A · doi:10.1016/j.msea.2012.04.036 · Cited by 112
Microstructure and mechanical properties of LMD–SLM hybrid forming Ti6Al4V alloy
Liu, Q., Wang, Y., Zheng, H., Tang, K., Li, D., Li, H., & Gong, S. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.02.069 · Cited by 112
Nassar, A. R., Keist, J. S., Reutzel, E. W., & Spurgeon, T. J. (2015) · Additive manufacturing · doi:10.1016/j.addma.2015.03.005 · Cited by 111
Kelly, C. N., Evans, N. T., Irvin, C. W., Chapman, S. C., Gall, K., & Safranski, D. L. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.01.024 · Cited by 109
Ghosh, S., & Choi, J. R. (2005) · Journal of Laser Applications · doi:10.2351/1.1961688 · Cited by 104
Baranowski, P., Płatek, P., Antolak‐Dudka, A., Sarzyński, M., Kucewicz, M., Durejko, T., Małąchowski, J., Janiszewski, J., & Czujko, T. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.11.018 · Cited by 104
Additively Manufactured and Surface Biofunctionalized Porous Nitinol
Karaji, Z. G., Speirs, M., Dadbakhsh, S., Kruth, J., Weinans, H., ZADPOOR, A. A., & Yavari, S. A. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b14026 · Cited by 99
Self-citationBakhshandeh, S., Karaji, Z. G., Lietaert, K., Fluit, A. C., Boel, C. H. E., Vogely, H. C., Vermonden, T., Hennink, W. E., Weinans, H., ZADPOOR, A. A., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b04950 · Cited by 98
Self-citationThe Biomaterials: Silver Jubilee Compendium
(2006) · Elsevier eBooks · doi:10.1016/b978-0-08-045154-1.x5000-x · Cited by 97
Xu, Y., Lu, Y., Sundberg, K. L., Liang, J., & Sisson, R. D. (2017) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-017-2710-y · Cited by 90
Marimuthu, S., Clark, D., Allen, J. B., Kamara, A. M., Mativenga, P. T., Li, L., & Scudamore, R. (2012) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/0954406212470363 · Cited by 88
Texture Evolution During Laser Direct Metal Deposition of Ti-6Al-4V
Sridharan, N., Chaudhary, A., Nandwana, P., & Babu, S. S. (2016) · JOM · doi:10.1007/s11837-015-1797-6 · Cited by 85
Solid Freeform Fabrication Proceedings
Bourell, D. L., Beaman, J. J., & ..., J. (2001) · doi:10.21236/ada400355 · Cited by 83
Thermal and Microstructure Modeling of Metal Deposition Processes with Application to Ti-6Al-4V
Kelly, S. M. (2004) · VTechWorks (Virginia Tech) · Cited by 83
Lin, X., Yue, T. M., Yang, H. O., & Huang, W. (2007) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-006-9021-5 · Cited by 80
Froend, M., Riekehr, S., Kashaev, N., Klusemann, B., & Enz, J. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.06.033 · Cited by 79
Fatigue limit of Ti6Al4V alloy produced by Selective Laser Sintering
Benedetti, M., Cazzolli, M., Fontanari, V., & Leoni, M. (2016) · Procedia Structural Integrity · doi:10.1016/j.prostr.2016.06.394 · Cited by 78
Tribological behavior of Ti6Al4V cellular structures produced by Selective Laser Melting
Bartolomeu, F., Sampaio, M., Carvalho, Ó. S. N., Pinto, E. M., Alves, N. M., Gomes, J. R., Silva, F. S., & Miranda, G. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.01.004 · Cited by 76
Self-citationHigh Cycle Fatigue of Laser Beam Deposited Ti-6Al-4V and Inconel 718
Amsterdam, E., & Kool, G. A. (2009) · Springer eBooks · doi:10.1007/978-90-481-2746-7_71 · Cited by 75
The effect of cooling rate on the cyclic deformation of β-annealed Ti–6Al–4V
Gil, F. J., Manero, J. M., Ginebra, M., & Planell, J. A. (2003) · Materials Science and Engineering A · doi:10.1016/s0921-5093(02)00784-0 · Cited by 70
Effect of microstructure and defects on fatigue behaviour of directed energy deposited Ti–6Al–4V
Prabhu, A. W., Vincent, T., Chaudhary, A., Zhang, W., & Babu, S. S. (2015) · Science and Technology of Welding & Joining · doi:10.1179/1362171815y.0000000050 · Cited by 69
Geometric modeling of lattice structures for additive manufacturing
Savio, G., Meneghello, R., & Concheri, G. (2018) · Rapid Prototyping Journal · doi:10.1108/rpj-07-2016-0122 · Cited by 66
Vance, A., Bari, K., & Arjunan, A. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.11.005 · Cited by 62
Multi-Material Processing By Lens
Smugeresky, J. E. (2018) · doi:10.15781/t21j97t99 · Cited by 61
Probabilistic fracture of Ti–6Al–4V made through additive layer manufacturing
Tancogne‐Dejean, T., Roth, C. C., Woy, U., & Mohr, D. (2015) · International Journal of Plasticity · doi:10.1016/j.ijplas.2015.09.007 · Cited by 60
Guo, R., Xu, L., Wu, J., Yang, R., & Zong, Y. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.05.041 · Cited by 53
Action-at-a-distance metamaterials: Distributed local actuation through far-field global forces
Hedayati, R., Mirzaali, M. J., Vergani, L. M., & ZADPOOR, A. A. (2018) · APL Materials · doi:10.1063/1.5019782 · Cited by 49
Self-citationClark, D., Whittaker, M. T., & Bache, M. R. (2011) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-011-9599-x · Cited by 43
ZADPOOR, A. A. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19092684 · Cited by 42
Self-citationFrontiers of Additively Manufactured Metallic Materials
ZADPOOR, A. A. (2018) · Materials · doi:10.3390/ma11091566 · Cited by 35
Self-citationAdditive Manufacturing Laser Deposition of Ti-6Al-4V for Aerospace Repair Applications
Dey, N. K., Liou, F. W., & Nedic, C. (2013) · doi:10.26153/tsw/15641 · Cited by 25
Residual Stress Determination Using Cross-Slitting and Dual-Axis ESPI
Schajer, G. S., & An, Y. (2009) · Experimental Mechanics · doi:10.1007/s11340-009-9317-7 · Cited by 25
Laser Additive Manufactured Ti–6Al–4V Alloy: Heat Treatment Studies
Chandramohan, P., Bhero, S., Varachia, F., Obadele, B. A., & Olubambi, P. A. (2017) · Transactions of the Indian Institute of Metals · doi:10.1007/s12666-017-1190-y · Cited by 23
Cited by
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
Progress and perspectives in laser additive manufacturing of key aeroengine materials
Tan, C., Weng, F., Sui, S., Chew, Y., & Bi, G. (2021) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2021.103804 · Cited by 520
Laser-based directed energy deposition (DED-LB) of advanced materials
Svetlizky, D., Zheng, B., Vyatskikh, A., Das, M., Bose, S., Bandyopadhyay, A., Schoenung, J. M., Lavernia, E. J., & Eliaz, N. (2022) · Materials Science and Engineering: A · doi:10.1016/j.msea.2022.142967 · Cited by 331
4D Printing for Biomedical Applications
Yarali, E., Mirzaali, M. J., Ghalayaniesfahani, A., Accardo, A., Diaz‐Payno, P. J., & Zadpoor, A. A. (2024) · Advanced Materials · doi:10.1002/adma.202402301 · Cited by 257
Self-citation
Metadata
- Authors
- Azarniya, A., Colera, X. G., Mirzaali, M. J., Sovizi, S., Bartolomeu, F., St Weglowski, M., Wits, W. W., Yap, C. Y., Ahn, J., Miranda, G., Silva, F. S., Madaah Hosseini, H. R., Ramakrishna, S., & Zadpoor, A. A.
- Venue
- Journal of Alloys and Compounds
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 804
- Pages
- 163-191
- ISSN
- 0925-8388 (ISSN-L)
- OpenAlex
- W2944168969
- Cited by
- 361
- References
- 151
- FWCI
- 22.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.