Cited by 961Cellular and Composite StructuresAdvanced Materials and MechanicsTopology Optimization in Engineering

The DOI matches its Crossref record; 82 of the 82 references it cites were found in a registry or an index.

Biomechanics of cellular solids

Gibson, Lorna J.·2005·Journal of Biomechanics

DOI 10.1016/j.jbiomech.2004.09.027

Open this paper in CoChat — free account

Abstract

Materials with a cellular structure are widespread in nature and include wood, cork, plant parenchyma and trabecular bone. Natural cellular materials are often mechanically efficient: the honeycomb-like microstructure of wood, for instance, gives it an exceptionally high performance index for resisting bending and buckling. Here we review the mechanics of a wide range of natural cellular materials and examine their role in lightweight natural sandwich structures (e.g. iris leaves) and natural tubular structures (e.g. plant stems or animal quills). We also describe two examples of engineered biomaterials with a cellular structure, designed to replace or regenerate tissue in the body.

Integrity signals

Registry

Crossref · 10.1016/j.jbiomech.2004.09.027

Cites

82 of 82 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Self-citation
Foam Structures with a Negative Poisson's Ratio
Lakes, R. S. (1987) · Science · doi:10.1126/science.235.4792.1038 · Cited by 3,917
Metal Foams: A Design Guide
Ashby, M., Evans, A. G., Fleck, N., Gibson, L. J., Hutchinson, J., Wadley, H. N. G., & Delale, F. (2001) · Applied Mechanics Reviews · doi:10.1115/1.1421119 · Cited by 2,695
Self-citation
Materials Selection in Mechanical Design
Ashby, M., & Cebon, D. (2011) · Elsevier eBooks · doi:10.1016/c2009-0-25539-5 · Cited by 2,688
The compressive behavior of bone as a two-phase porous structure
Carter, D., & Hayes, W. (1977) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-197759070-00021 · Cited by 2,001
The mechanics of three-dimensional cellular materials
Gibson, I. J., & Ashby, M. F. (1982) · Proceedings of the Royal Society of London A Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0088 · Cited by 1,895
Analysis and design of structural sandwich panels
Ogorkiewicz, R. M. (1970) · Composites · doi:10.1016/0010-4361(70)90244-2 · Cited by 1,762
Mechanics of Wood and Wood Composites
Bodig, J., & Jayne, B. A. (1982) · Medical Entomology and Zoology · Cited by 1,473
The mechanics of two-dimensional cellular materials
Gibson, L. J., Ashby, M. F., Schajer, G. S., & Robertson, C. I. (1982) · Proceedings of the Royal Society of London A Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0087 · Cited by 1,280
Self-citation
Preparation and characterization of poly(l-lactic acid) foams
Mikos, A. G., Thorsen, A. J., Czerwonka, L. A., Bao, Y., Langer, R., Winslow, D. N., & Vacanti, J. P. (1994) · Polymer · doi:10.1016/0032-3861(94)90953-9 · Cited by 1,196

Flagged first, then by citations

Show all 82 references

Research works printed but not linked: 7

Bensusan, J.S., Davy, D.T., Heiple, K.G., Verdin, P.J., 1983. 19th Annual Orthopaedic Research Society Meeting 8, pp. 132.
Goodman, 1971, Orthotropic strength of wood in compression, Wood Science, 4, 83
Goree, 1962, Elastic stability of circular cylindrical shells stabilized by a soft elastic core, Experimental Mechanics, 2, 142
Guo, X.E., Kim, C.H., 1999. Effects of age-related bone loss: A 3D microstructural simulation. Proceedings of the 1999 Bioengineering Conference American Society of Mechanical Engineers Bioengineering Division, vol 42. pp. 327–328.
Lhommeau, 1998, Preparation of highly interconnected porous tyrosine-derived polycarbonate scaffolds, Tissue Engineering, 4, 468
Maddox, R.D., Carroll, J.W., Hollister, S.J., Mazumdar, J., Krebsbach, P.H., 2003. Gene/cell delivery from designed titanium scaffolds made by free-form fabrication. Society for Biomaterials 29th Annual Meeting Transactions. Reno, Nevada.
Patel, 1970, Structural features and mechanical properties of rigid cellular plastics, Journal of Materials, 5, 909

Sorted by citations

Items 301–400 of 959

Load distribution and damage evolution in bending and stretch dominated Ti-6Al-4V cellular structures processed by selective laser melting
Brenne, F., & Niendorf, T. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2018.12.017 · Cited by 36
Effect of Architected Structural Members on the Viscoelastic Response of 3D Printed Simple Cubic Lattice Structures
Abusabir, A., Khan, M., Asif, M. T., & Khan, K. A. (2022) · Polymers · doi:10.3390/polym14030618 · Cited by 36
Parametric Design of Hip Implant With Gradient Porous Structure
Gao, X., Zhao, Y., Wang, M., Liu, Z., & Liu, C. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.850184 · Cited by 35
Fluid‐structure interaction analysis of transcatheter aortic valve implantation
Fumagalli, I., Polidori, R., Renzi, F., Fusini, L., Quarteroni, A. M., Pontone, G., & Vergara, C. (2023) · International Journal for Numerical Methods in Biomedical Engineering · doi:10.1002/cnm.3704 · Cited by 35
Superelastic, fatigue resistant and heat insulated carbon nanofiber aerogels for piezoresistive stress sensors
Hou, X., Zhang, R., & Fang, D. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.09.195 · Cited by 35
Excellent Specific Mechanical and Electrical Properties of Anisotropic Freeze‐Cast Native and Carbonized Bacterial Cellulose‐Alginate Foams
Qiu, K., & Wegst, U. G. K. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202105635 · Cited by 35
Three‐dimensional Ceramic/Camphene‐based Coextrusion for Unidirectionally Macrochanneled Alumina Ceramics with Controlled Porous Walls
Moon, Y.-W., Shin, K.-H., Koh, Y., Jung, H., & Kim, H. (2013) · Journal of the American Ceramic Society · doi:10.1111/jace.12634 · Cited by 35
Structure-property relationship in ionomer membranes
Kusoglu, A., Karlsson, A. M., & Santare, M. H. (2010) · Polymer · doi:10.1016/j.polymer.2010.01.046 · Cited by 34
Synthesis and characterization of Ti–Co alloy foam for biomedical applications
Mutlu, İ. (2016) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(15)64028-6 · Cited by 34
Mechanical and flow characterization of Sponceram® carriers: Evaluation by homogenization theory and experimental validation
Sanz‐Herrera, J. A., Kasper, C., van Griensven, M., García‐Aznar, J. M., Ochoa, I., & Doblaré, M. (2008) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31065 · Cited by 34
Does cancellous screw insertion torque depend on bone mineral density and/or microarchitecture?
Ab-Lazid, R., Perilli, E., Ryan, M. K., Costi, J. J., & Reynolds, K. J. (2013) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2013.11.030 · Cited by 34
Mimicking the loading adaptation of bone microstructure with aluminum foams
Mirzaali, M. J., Mussi, V., Vena, P., Libonati, F., Vergani, L. M., & Strano, M. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.04.039 · Cited by 34
Tensile deformation and failure of North American porcupine quills
Chou, S., & Overfelt, R. A. (2011) · Materials Science and Engineering C · doi:10.1016/j.msec.2011.08.002 · Cited by 33
Biological materials by design
Zhao Qin, A., Dimas, L. S., Adler, D. C., Bratzel, G. H., & Buehler, M. J. (2014) · Journal of Physics Condensed Matter · doi:10.1088/0953-8984/26/7/073101 · Cited by 33
In-situ fabrication of porous hydroxyapatite (HA) scaffolds with dense shells by freezing HA/camphene slurry
Yoon, B., Park, C.-S., Kim, H., & Koh, Y. (2007) · Materials Letters · doi:10.1016/j.matlet.2007.09.063 · Cited by 33
A tracheal scaffold of gelatin-chondroitin sulfate-hyaluronan-polyvinyl alcohol with orientated porous structure
Yu, X., Qian, G., Chen, S., Xu, D., Zhao, X., & Du, C. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.12.017 · Cited by 33
In-plane and out-of-plane buckling of architected cellular plates: Numerical and experimental study
Niknam, H., & Akbarzadeh, A. H. (2018) · Composite Structures · doi:10.1016/j.compstruct.2018.08.026 · Cited by 33
Processing–Structure–Properties of Cork Polymer Composites
Martins, C. I., & Gil, V. (2020) · Frontiers in Materials · doi:10.3389/fmats.2020.00297 · Cited by 33
Influence of pore-size distributions and pore-wall mechanics on the mechanical behavior of cellular solids like aerogels
Rege, A., Aney, S., & Milow, B. (2021) · Physical review. E · doi:10.1103/physreve.103.043001 · Cited by 33
Decoupling microlattice metamaterial properties through a structural design strategy inspired by the Hall–Petch relation
Zhang, L., Song, B., Zhang, J., Yao, Y., Lü, J., & Shi, Y. (2022) · Acta Materialia · doi:10.1016/j.actamat.2022.118214 · Cited by 33
Optimization of a lattice structure inspired by glass sponge
Li, Q., & Sun, B. (2022) · Bioinspiration & Biomimetics · doi:10.1088/1748-3190/ac9fb2 · Cited by 39
Mimicking high strength lightweight novel structures inspired from the trabecular bone microarchitecture
Kumar, N., Kumar, A., Uniyal, P., Ramalingaiah, B., Sharma, S., Goni, V. G., Aggarwal, S., Bhadada, S. K., & Bhushan, B. (2020) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2019.0448 · Cited by 32
Monodisperse polystyrene foams via polymerization of foamed emulsions: structure and mechanical properties
Elsing, J., Ștefanov, T., Gilchrist, M. D., & Stubenrauch, C. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp06612g · Cited by 32
Density scaling in the mechanics of a disordered mechanical meta-material
Rayneau-Kirkhope, D., Bonfanti, S., & Zapperi, S. (2019) · Applied Physics Letters · doi:10.1063/1.5083027 · Cited by 32
Changes in leaf inclination angle as an indicator of progression toward leaf surface storage during the rainfall interception process
Holder, C. D., Lauderbaugh, L. K., Ginebra-Solanellas, R. M., & Webb, R. (2020) · Journal of Hydrology · doi:10.1016/j.jhydrol.2020.125070 · Cited by 32
Hierarchical combinatorial design and optimization of non-periodic metamaterial structures
Wang, J., Callanan, J. G., Ogunbodede, O. T., & Rai, R. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101710 · Cited by 32
Facile template preparation of novel electroactive scaffold composed of polypyrrole-coated poly(glycerol-sebacate-urethane) for tissue engineering applications
Golbaten‐Mofrad, H., Sahzabi, A. S., Seyfikar, S., Salehi, M. H., Goodarzi, V., Wurm, F. R., & Jafari, S. H. (2021) · European Polymer Journal · doi:10.1016/j.eurpolymj.2021.110749 · Cited by 32
Hexagonal Voronoi pattern detected in the microstructural design of the echinoid skeleton
Perricone, V., Grun, T. B., Rendina, F., Marmo, F., Carnevali, C., Kowalewski, M., Facchini, A., Stefano, M. D., Santella, L., Langella, C., et al. (2022) · Journal of The Royal Society Interface · doi:10.1098/rsif.2022.0226 · Cited by 32
A Finite Element Prediction of Strain on Cells in a Highly Porous Collagen-Glycosaminoglycan Scaffold
Stops, A. J. F., McMahon, L. A., O’Mahoney, D., Prendergast, P. J., & McHugh, P. E. (2008) · Journal of Biomechanical Engineering · doi:10.1115/1.2979873 · Cited by 32
Electromechanical Response of Piezoelectric Honeycomb Foam Structures
Iyer, S., Alkhader, M., & Venkatesh, T. A. (2013) · Journal of the American Ceramic Society · doi:10.1111/jace.12699 · Cited by 32
Characterization of porous nickel-free austenitic stainless steel prepared by mechanical alloying
García-Cabezón, C., Blanco, Y., Rodrı́guez-Méndez, M. L., & Martín, F. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.05.045 · Cited by 32
Compression properties of metal beetle elytron plates and the elementary unit of the trabecular-honeycomb core structure
Zhang, X., Chen, J., Okabe, Y., Xie, J., & Zhang, Z. (2017) · Journal of Sandwich Structures & Materials · doi:10.1177/1099636217722823 · Cited by 32
A morphological, topological and mechanical investigation of gyroid, spinodoid and dual-lattice algorithms as structural models of trabecular bone
Vafaeefar, M., Moerman, K. M., Kavousi, M., & Vaughan, T. J. (2022) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2022.105584 · Cited by 31
AI‐Based Metamaterial Design for Wearables
Yigci, D., Ahmadpour, A., & Taşoğlu, S. (2023) · Advanced Sensor Research · doi:10.1002/adsr.202300109 · Cited by 33
Heat-Induced Polycondensation Reaction with Self-Generated Blowing Agent Forming Aromatic Thermosetting Copolyester Foams
Bakır, M., Meyer, J. L., Economy, J., & Jasiuk, I. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b00971 · Cited by 31
Fabrication, structure and properties of three-dimensional biodegradable poly(glycerol sebacate urethane) scaffolds
Frydrych, M., & Chen, B. (2017) · Polymer · doi:10.1016/j.polymer.2017.06.064 · Cited by 31
Finite element analysis for mechanical response of Ti foams with regular structure obtained by selective laser melting
Cho, H., Cho, Y., & Han, H. N. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.07.003 · Cited by 31
Impact Behavior of Composite Hollow Sphere Structures
Vesenjak, M., Ren, Z., Fiedler, T., & Öchsner, A. Ö. (2009) · Journal of Composite Materials · doi:10.1177/0021998309094970 · Cited by 31
Poroviscoelasticity and compression-softening of agarose hydrogels
Ed-Daoui, A., & Snabre, P. (2021) · Rheologica Acta · doi:10.1007/s00397-021-01267-3 · Cited by 31
Energy Absorption of 3D Printed ABS and TPU Multimaterial Honeycomb Structures
Khatri, N. R., & Egan, P. (2023) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2022.0196 · Cited by 30
3D Composite Finite Elements for Elliptic Boundary Value Problems with Discontinuous Coefficients
Preußer, T., Rumpf, M., Sauter, S. A., & Schwen, L. O. (2011) · SIAM Journal on Scientific Computing · doi:10.1137/100791750 · Cited by 30
Effects of Loading Orientation on the Morphology of the Predicted Yielded Regions in Trabecular Bone
Shi, X., Wang, X., & Niebur, G. L. (2008) · Annals of Biomedical Engineering · doi:10.1007/s10439-008-9619-4 · Cited by 30
Evaluation of the performance of extruded polystyrene boards – Implications for their application in earthquake engineering
Kilar, V., Koren, D., & Bosiljkov, V. B. (2014) · Polymer Testing · doi:10.1016/j.polymertesting.2014.09.013 · Cited by 30
Energy absorption of graded foam subjected to blast: A theoretical approach
Zhou, H., Wang, Y., Wang, X., Zhao, Z., & Ma, G. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.06.124 · Cited by 30
Ice-templating beet-root pectin foams: Controlling texture, mechanics and capillary properties
Christoph, S., Hamraoui, A., Bonnin, E., Garnier, C., Coradin, T., & Fernandes, F. M. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.05.160 · Cited by 30
Effects of Fiber Angle on the Tensile Properties of Partially Delignified and Densified Wood
Jakob, M., Gaugeler, J., & Gindl‐Altmutter, W. (2020) · Materials · doi:10.3390/ma13235405 · Cited by 30
Sinter-coating method for the production of TiN-coated titanium foam for biomedical implant applications
Mutlu, İ. (2013) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2013.05.041 · Cited by 30
Development of Porous Calcium Phosphate Bioceramics for Bone Implant Applications: A Review
Sopyan, I., & Gunawan, G. (2013) · Current Materials Science · doi:10.2174/18744648113069990012 · Cited by 30
Fiber Network Models Predict Enhanced Cell Mechanosensing on Fibrous Gels
Aghvami, M., Billiar, K. L., & Sander, E. A. (2016) · Journal of Biomechanical Engineering · doi:10.1115/1.4034490 · Cited by 29
Novel, Cellulose-Based, Lightweight, Wet-Resilient Materials with Tunable Porosity, Density, and Strength
Durán, V. L., Erlandsson, J., Wågberg, L., & Larsson, P. A. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b01165 · Cited by 30
Finite Element Modeling of Cellular Materials
Daxner, T. (2010) · Courses and lectures · doi:10.1007/978-3-7091-0297-8_2 · Cited by 30
Effect of modified cellulose nanocrystals on microstructural and mechanical properties of polyvinyl alcohol/ovalbumin biocomposite scaffolds
Kumar, A., Negi, Y. S., Choudhary, V., & Bhardwaj, N. K. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.05.038 · Cited by 29
Variability of morphometric parameters of human trabecular tissue from coxo-arthritis and osteoporotic samples.
Marinozzi, F., Marinozzi, A., Bini, F., Zuppante, F., Pecci, R., & Bedini, R. (2012) · PubMed · doi:10.4415/ann_12_01_04 · Cited by 29
Discrete homogenization of architectured materials: Implementation of the method in a simulation tool for the systematic prediction of their effective elastic properties
Reis, F. D., & Ganghoffer, J. (2010) · Cited by 29
A Review on Multiscale Bone Damage: From the Clinical to the Research Perspective
Buccino, F., Colombo, C., & Vergani, L. M. (2021) · Materials · doi:10.3390/ma14051240 · Cited by 30
Environment-adaptive, anti-fatigue thermal interface graphene foam
Chen, Y., Pang, K., Liu, X., Li, K., Li, K., Cai, S., Liu, Y., Xu, Z., & Gao, C. (2023) · Carbon · doi:10.1016/j.carbon.2023.118142 · Cited by 29
Biomechanical Evaluation of Cross‐Pin Versus Interference Screw Tibial Fixation Using a Soft‐Tissue Graft During Transtibial Posterior Cruciate Ligament Reconstruction
Lee, Y. S., Wang, J. H., Bae, J., Lim, H. C., Park, J. H., Ahn, J. H., Bae, T. S., & Lim, B.-O. (2009) · Arthroscopy The Journal of Arthroscopic and Related Surgery · doi:10.1016/j.arthro.2009.02.006 · Cited by 29
Modeling and simulation of relaxation in viscoelastic open cell materials and structures
Pettermann, H. E., & Hüsing, J. (2012) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2012.04.027 · Cited by 29
Mechanisms of reduced implant stability in osteoporotic bone
Ruffoni, D., Müller, R., & van Lenthe, H. (2011) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-011-0312-4 · Cited by 29
The mechanical heterogeneity of the hard callus influences local tissue strains during bone healing: A finite element study based on sheep experiments
Vetter, A., Liu, Y., Witt, F., Manjubala, I., Sander, O., Epari, D. R., Fratzl, P., Duda, G. N., & Weinkamer, R. (2010) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2010.09.009 · Cited by 29
Adaptive pressure-controlled cellular structures for shape morphing I: design and analysis
Luo, Q., & Tong, L. (2013) · Smart Materials and Structures · doi:10.1088/0964-1726/22/5/055014 · Cited by 29
An Overview of Design and Development of Biomimetic Bone Scaffolds Using Heterogeneous TPMS Lattice Structures
Mall, A. P., Bhandarkar, V. V., Mandaloi, G., & Tandon, P. (2024) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-024-10212-5 · Cited by 32
Effect of solid distribution on elastic properties of open-cell cellular solids using numerical and experimental methods
Zargarian, A., Esfahanian, M., Kadkhodapour, J., & Ziaei‐Rad, S. (2014) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2014.05.018 · Cited by 28
Manipulating failure mechanism of rapid prototyped scaffolds by changing nodal connectivity and geometry of the pores
Amirkhani, S., Bagheri, R., & Yazdi, A. Z. (2012) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2012.08.029 · Cited by 28
Impact behaviour of freeze-dried and fresh pomelo ( Citrus maxima ) peel: influence of the hydration state
Thielen, M., Speck, T., & Seidel, R. (2015) · Royal Society Open Science · doi:10.1098/rsos.140322 · Cited by 28
Single-parameter mechanical design of a 3D-printed octet truss topological scaffold to match natural cancellous bones
Wang, L., Chen, Q., Yarlagadda, P. K. D. V., Zhu, F., Li, Q., & Li, Z. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109986 · Cited by 28
Bone: A Composite Natural Material
Fatima, M., Canhão, H. M., & Eurico, J. (2011) · InTech eBooks · doi:10.5772/17523 · Cited by 30
Influence of honeycomb dimensions and forming methods on the compressive properties of beetle elytron plates
Zhang, X., Chen, J., Okabe, Y., Zhang, P., Xiong, X., & Yu, X. (2017) · Journal of Sandwich Structures & Materials · doi:10.1177/1099636217731993 · Cited by 28
Viscoelastic properties of architected foams based on the Schoen IWP triply periodic minimal surface
Khan, K. A., & Al‐Rub, R. K. A. (2018) · Mechanics of Advanced Materials and Structures · doi:10.1080/15376494.2018.1538470 · Cited by 28
Enhancing mechanical properties of cellular core sandwich panels: a review of topological parameters and design improvements
Charkaoui, A., Hassan, N. M., & Bahroun, Z. (2023) · Materials Research Express · doi:10.1088/2053-1591/acfb60 · Cited by 27
Viscoelastic characterization of rat cerebral cortex and type I collagen scaffolds for central nervous system tissue engineering
Elias, P. Z., & Spector, M. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.03.014 · Cited by 27
Finite element dependence of stress evaluation for human trabecular bone
Dépalle, B., Chapurlat, R. D., Berre, H. W.-L., Bou‐Saïd, B., & Follet, H. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.08.012 · Cited by 27
Bone marrow absorption and retention properties of engineered scaffolds with micro-channels and nano-pores for tissue engineering: A proof of concept
Oh, D. S., Kim, Y. H., Ganbat, D., Han, M.-H., Lim, P., Back, J. H., Lee, F. Y., & Tawfeek, H. A. W. (2013) · Ceramics International · doi:10.1016/j.ceramint.2013.04.021 · Cited by 27
Influence of Fluoride Content of Artificial Saliva on Metal Release from 17-4 PH Stainless Steel Foam for Dental Implant Applications
Mutlu, İ., & Oktay, E. (2013) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2013.03.006 · Cited by 27
Re-entrant inclusions in cellular solids: From defects to reinforcements
Zorzetto, L., & Ruffoni, D. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.05.039 · Cited by 27
Hierarchical porosity in additively manufactured bioengineering scaffolds: Fabrication & characterisation
Shalchy, F., Lovell, C., & Bhaskar, A. (2020) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2020.103968 · Cited by 27
Effect of organic fibers addition on digital light processing for Al2O3 porous ceramics
Zhao, P., Hu, K., Wang, H., Li, X., & Lu, Z. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.05.028 · Cited by 27
Predicting failure modes of 3D-printed multi-material polymer sandwich structures from process parameters
Edelen, D. L., & Bruck, H. A. (2021) · Journal of Sandwich Structures & Materials · doi:10.1177/10996362211020445 · Cited by 27
Mechanical properties of sinter-hardened Cr–Si–Ni–Mo based steel foam
Mutlu, İ., & Oktay, E. (2012) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.08.032 · Cited by 27
Preliminary Study on Biomechanics of Vertebroplasty
Teo, J. C. M., Wang, S. C., & Teoh, S. H. (2007) · Spine · doi:10.1097/brs.0b013e318059af56 · Cited by 27
Three dimensional melt-deposition of polycaprolactone/bio-derived hydroxyapatite composite into scaffold for bone repair
Jiang, W., Shi, J., Li, W., & Sun, K. (2012) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2012.698894 · Cited by 27
Effect of bone material properties on effective region in screw-bone model: an experimental and finite element study
Liu, S., Qi, W., Zhang, Y., Wu, Z., Yan, Y., & Lei, W. (2014) · BioMedical Engineering OnLine · doi:10.1186/1475-925x-13-83 · Cited by 27
Density–property relationships in mineralized collagen–glycosaminoglycan scaffolds
Kanungo, B. P., & Gibson, L. J. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.11.029 · Cited by 27
Self-citation
Effects of nanoparticle impregnation of polyurethane foam core on the performance of sandwich beams
Birman, V., T, C. K., Hopkins, M., & Volz, J. S. (2012) · Composites Part B Engineering · doi:10.1016/j.compositesb.2012.09.026 · Cited by 27
Additive manufacturing of bionic interfaces: From conceptual understanding to renewable energy applications
Chen, X., Chen, A., Zhang, L., Yu, H., Mao, Z., Chen, Y., Gu, J., Yan, C., & Lü, J. (2024) · Advanced bionics. · doi:10.1016/j.abs.2024.10.001 · Cited by 26
Static and fatigue compression behaviour of conventional and auxetic open-cell foam
Bouchahdane, K., Ouelaa, N., & Belaadi, A. (2021) · Mechanics of Advanced Materials and Structures · doi:10.1080/15376494.2021.1972496 · Cited by 26
Finite deformation effects in cellular structures with hyperelastic cell walls
Mihai, L. A., & Goriely, A. (2014) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2014.10.015 · Cited by 26
Assembling unidirectionally frozen alumina/camphene bodies for aligned porous alumina ceramics with larger dimensions
Soon, Y.-M., Shin, K.-H., Koh, Y., Choi, W.-Y., & Kim, H. (2010) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2010.09.019 · Cited by 26
Study of the mechanical stability and bioactivity of Bioglass ® based glass-ceramic scaffolds produced via powder metallurgy-inspired technology
Boccardi, E., Melli, V., Catignoli, G., Altomare, L., Tavafoghi, M., Cerruti, M., Lefebvre, L.-P., & Nardo, L. D. (2016) · Biomedical Materials · doi:10.1088/1748-6041/11/1/015005 · Cited by 26
Subcritical carbon dioxide foaming of polycaprolactone for bone tissue regeneration
Duarte, R., Correia‐Pinto, J., Reis, R. L., & Duarte, A. R. C. (2018) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2018.05.019 · Cited by 26
Comparative fatigue performance of as-built vs etched Ti64 in TPMS-gyroid and stochastic structures fabricated via PBF-LB for biomedical applications
Araya, M., Jarvenpää, A., Rautio, T., Morales-Sánchez, J., & Guillén-Girón, T. (2024) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2024-0152 · Cited by 25
Novel 3D composites with highly flexible behavior based on chitosan and bioactive glass for biomedical applications
Martins, T., de Oliveira, A. A. R., Oliveira, A. C., Boaventura, T. P., Barrioni, B. R., Costa-Júnior, E. S., & Pereira, M. M. (2016) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2016.12.012 · Cited by 25
Modeling of anisotropic remodeling of trabecular bone coupled to fracture
Goda, I., & Ganghoffer, J. (2018) · Archive of Applied Mechanics · doi:10.1007/s00419-018-1438-y · Cited by 25
Quantitative 3D structural analysis of the cellular microstructure of sea urchin spines (II): Large-volume structural analysis
Chen, H., Yang, T., Wu, Z., Deng, Z., Zhu, Y., & Li, L. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.03.006 · Cited by 25
Functional Anatomy, Impact Behavior and Energy Dissipation of the Peel of Citrus × limon: A Comparison of Citrus × limon and Citrus maxima
Jentzsch, M., Becker, S., Thielen, M., & Speck, T. (2022) · Plants · doi:10.3390/plants11070991 · Cited by 25
Open-porous magnesium-based scaffolds withstand in vitro corrosion under cyclic loading: A mechanistic study
Bonithon, R., Lupton, C., Roldo, M., Dunlop, J. N., Blunn, G. W., Witte, F., & Tozzi, G. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2022.04.012 · Cited by 25
The micro-structure of bone trabecular fracture: An inter-site study
Tassani, S., & Matsopoulos, G. K. (2013) · Bone · doi:10.1016/j.bone.2013.12.007 · Cited by 25
Composition, structure and mechanical properties of several natural cellular materials
Yin, Z., Pan, Z., Wang, C., Dong, Y., & Yu-xiang, O. (2007) · Chinese Science Bulletin · doi:10.1007/s11434-007-0432-5 · Cited by 25
Morphological and Compressional Mechanical Properties of Freeze-Dried Mannitol, Sucrose, and Trehalose Cakes
Devi, S., & Williams, D. R. (2013) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.23736 · Cited by 25
Comparative Characterisation of 3-D Hydroxyapatite Scaffolds Developed Via Replication of Synthetic Polymer Foams and Natural Marine Sponges
Cunningham, E., & Dunne, N. (2011) · Journal of Tissue Science & Engineering · doi:10.4172/2157-7552.s1-001 · Cited by 25

Authors: Gibson, L. J.
Affiliations: Massachusetts Institute of Technology (US)
Corresponding author: Gibson, Lorna J.
ORCID: Gibson, Lorna J.
Venue: Journal of Biomechanics
Publisher: Elsevier BV
Published: 2005-03
Volume: 38
Issue: 3
Pages: 377-399
ISSN: 0021-9290 (ISSN-L)
DOI: 10.1016/j.jbiomech.2004.09.027
OpenAlex: W2003488635
Cited by: 961
References: 82
Citations by year: 2026: 42 · 2025: 45 · 2024: 46 · 2023: 49 · 2022: 59 · 2021: 66 · 2020: 62 · 2019: 51 · 2018: 57 · 2017: 64 · 2016: 50 · 2015: 40 · 2014: 50 · 2013: 50 · 2012: 39
FWCI: 8.64
Type: journal article
Language: en
Open access: closed
Licence: www.elsevier.com/tdm/userlicense/1.0/ (tdm)
Locations: Journal of Biomechanics (publishedVersion)
PubMed (publishedVersion)
Topics: Physical Sciences › Engineering › Mechanical Engineering › Cellular and Composite Structures
Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
Physical Sciences › Engineering › Civil and Structural Engineering › Topology Optimization in Engineering
Keywords: cellular materials, wood, cork, trabecular bone, honeycomb microstructure, mechanical efficiency, sandwich structures, tubular structures, plant stems, engineered biomaterials, tissue regeneration
MeSH terms: Animals, Biocompatible Materials, Biomechanical Phenomena, Bone and Bones, Humans, Models, Biological, Tissue Engineering

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Biomechanics of cellular solids

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks