Cited by 961Cellular and Composite StructuresAdvanced Materials and MechanicsTopology Optimization in Engineering

The DOI matches its Crossref record; 82 of the 82 references it cites were found in a registry or an index.

Biomechanics of cellular solids

Gibson, Lorna J.·2005·Journal of Biomechanics

DOI 10.1016/j.jbiomech.2004.09.027

Open this paper in CoChat — free account

Abstract

Materials with a cellular structure are widespread in nature and include wood, cork, plant parenchyma and trabecular bone. Natural cellular materials are often mechanically efficient: the honeycomb-like microstructure of wood, for instance, gives it an exceptionally high performance index for resisting bending and buckling. Here we review the mechanics of a wide range of natural cellular materials and examine their role in lightweight natural sandwich structures (e.g. iris leaves) and natural tubular structures (e.g. plant stems or animal quills). We also describe two examples of engineered biomaterials with a cellular structure, designed to replace or regenerate tissue in the body.

Integrity signals

Registry

Crossref · 10.1016/j.jbiomech.2004.09.027

Cites

82 of 82 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Self-citation
Foam Structures with a Negative Poisson's Ratio
Lakes, R. S. (1987) · Science · doi:10.1126/science.235.4792.1038 · Cited by 3,917
Metal Foams: A Design Guide
Ashby, M., Evans, A. G., Fleck, N., Gibson, L. J., Hutchinson, J., Wadley, H. N. G., & Delale, F. (2001) · Applied Mechanics Reviews · doi:10.1115/1.1421119 · Cited by 2,695
Self-citation
Materials Selection in Mechanical Design
Ashby, M., & Cebon, D. (2011) · Elsevier eBooks · doi:10.1016/c2009-0-25539-5 · Cited by 2,688
The compressive behavior of bone as a two-phase porous structure
Carter, D., & Hayes, W. (1977) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-197759070-00021 · Cited by 2,001
The mechanics of three-dimensional cellular materials
Gibson, I. J., & Ashby, M. F. (1982) · Proceedings of the Royal Society of London A Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0088 · Cited by 1,895
Analysis and design of structural sandwich panels
Ogorkiewicz, R. M. (1970) · Composites · doi:10.1016/0010-4361(70)90244-2 · Cited by 1,762
Mechanics of Wood and Wood Composites
Bodig, J., & Jayne, B. A. (1982) · Medical Entomology and Zoology · Cited by 1,473
The mechanics of two-dimensional cellular materials
Gibson, L. J., Ashby, M. F., Schajer, G. S., & Robertson, C. I. (1982) · Proceedings of the Royal Society of London A Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0087 · Cited by 1,280
Self-citation
Preparation and characterization of poly(l-lactic acid) foams
Mikos, A. G., Thorsen, A. J., Czerwonka, L. A., Bao, Y., Langer, R., Winslow, D. N., & Vacanti, J. P. (1994) · Polymer · doi:10.1016/0032-3861(94)90953-9 · Cited by 1,196

Show all 82 references

Research works printed but not linked: 7

Bensusan, J.S., Davy, D.T., Heiple, K.G., Verdin, P.J., 1983. 19th Annual Orthopaedic Research Society Meeting 8, pp. 132.
Goodman, 1971, Orthotropic strength of wood in compression, Wood Science, 4, 83
Goree, 1962, Elastic stability of circular cylindrical shells stabilized by a soft elastic core, Experimental Mechanics, 2, 142
Guo, X.E., Kim, C.H., 1999. Effects of age-related bone loss: A 3D microstructural simulation. Proceedings of the 1999 Bioengineering Conference American Society of Mechanical Engineers Bioengineering Division, vol 42. pp. 327–328.
Lhommeau, 1998, Preparation of highly interconnected porous tyrosine-derived polycarbonate scaffolds, Tissue Engineering, 4, 468
Maddox, R.D., Carroll, J.W., Hollister, S.J., Mazumdar, J., Krebsbach, P.H., 2003. Gene/cell delivery from designed titanium scaffolds made by free-form fabrication. Society for Biomaterials 29th Annual Meeting Transactions. Reno, Nevada.
Patel, 1970, Structural features and mechanical properties of rigid cellular plastics, Journal of Materials, 5, 909

Sorted by citations

Items 701–800 of 959

Additively Manufactured Bionic Corrugated Lightweight Honeycomb Structures with Controlled Deformation Load-Bearing Properties
Li, J., Wang, H., Kong, X., Jiao, Z., & Yang, W. (2024) · Materials · doi:10.3390/ma17102274 · Cited by 5
Valorization of Cork and High-Density Polyethylene and Polypropylene Wastes in Cork–Plastic Composites: Their Morphology, Mechanical Performance, and Fire Properties
Petlitckaia, S., Tihay‐Felicelli, V., Ferry, L., Buonomo, S., Luciani, C., Quilichini, Y., Santoni, P., Pereira, E., & Barboni, T. (2024) · Journal of Composites Science · doi:10.3390/jcs8060195 · Cited by 5
Surface engineering of textile structural composites with ZnO nanorods and graphene nanofillers for aircrew helmet applications
Singh, O., & Behera, B. K. (2024) · Polymer Composites · doi:10.1002/pc.28729 · Cited by 5
Mechanical Performance Related to Chemical Variability in Differently Pretreated and Densified Birch Wood
Jakob, M., Janesch, J., Müller, U., & Gindl‐Altmutter, W. (2024) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.4c07642 · Cited by 5
Computational Modeling of Trabecular Bone Mechanics
Niebur, G. L., & Keaveny, T. M. (2009) · Springer eBooks · doi:10.1007/978-90-481-3575-2_9 · Cited by 5
Fabrication of highly porous titanium (Ti) scaffolds with two interlaced periodic pores
Shin, K.-H., Soon, Y.-M., Koh, Y., Lee, J., Choi, W. Y., & Kim, H. (2009) · Materials Letters · doi:10.1016/j.matlet.2009.03.007 · Cited by 5
Biomimetic Design of Lightweight Vehicle Structures Based on Animal Bone Properties
Rui, Y., Subic, A., Takla, M., Wang, C., Niehoff, A., Hamann, N., & Brueggemann, G. P. (2013) · Advanced materials research · doi:10.4028/www.scientific.net/amr.633.3 · Cited by 5
Comparative Study on Mechanical Behavior of Low Temperature Characteristics of Polymeric Foams for Ships and Offshore Structures
Park, S., Kim, J.-H., & Lee, J. (2014) · Journal of the Society of Naval Architects of Korea · doi:10.3744/snak.2014.51.6.495 · Cited by 5
Numerical Homogenization of Trabecular Bone Specimens using Composite Finite Elements
Schwen, L. O. (2010) · Cited by 5
Glass foams from acid-leached phlogopite waste
Deysel, H. M., Berluti, K., Plessis, B. J. D., & Focke, W. W. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-04589-4 · Cited by 5
A computational framework for crack propagation in spatially heterogeneous materials
Lewandowski, K., Kaczmarczyk, Ł., Athanasiadis, I., Marshall, J. F., & Pearce, C. J. (2021) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2020.0291 · Cited by 5
Image Segmentation Applied to the Study of Micrographs of Cellular Solids
Sparavigna, A. C. (2017) · International Journal of Sciences · doi:10.18483/ijsci.1201 · Cited by 5
Effect of solid phase corrugation on the thermo-mechanical properties of low density flexible cellular polymers
Pérez-Tamarit, S., Solorzano, E., Hilger, A., Manke, I., & Rodríguez‐Pérez, M. Á. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.11.020 · Cited by 5
Dynamic Mechanical Properties and Constitutive Model of Honeycomb Materials with Random Defects under Impact Loading
Hu, J., Jianwei, R., Ma, W., & Aiguo, W. (2019) · Shock and Vibration · doi:10.1155/2019/1087919 · Cited by 5
Development and Validation of an Analogue Lumbar Spine Model and its Integral Components
Domann, J. P. (2011) · KU ScholarWorks (The University of Kansas) · Cited by 5
Functional principles of baobab fruit pedicels – anatomy and biomechanics
Lautenschläger, T., Rüggeberg, M., Noack, N., Bunk, K., Mawunu, M., Speck, T., & Neinhuis, C. (2020) · Annals of Botany · doi:10.1093/aob/mcaa149 · Cited by 4
Computational and Experimental Characterization of Aligned Collagen across Varied Crosslinking Degrees
Lin, S., Patrawalla, N. Y., Zhai, Y., Dong, P., Kishore, V., & Gu, L. (2024) · Micromachines · doi:10.3390/mi15070851 · Cited by 4
Preparation and properties of biomimetic bone repair hydrogel with sandwich structure
Kong, X., Tian, L., Li, W., & Han, T. (2024) · Journal of Biomaterials Applications · doi:10.1177/08853282241268676 · Cited by 4
Design Engineering of High-Energy Absorbent Aircrew Helmet Using 3D Woven Structural Composite
Singh, O., Shukla, S., Sharma, J., & Behera, B. K. (2024) · Applied Composite Materials · doi:10.1007/s10443-024-10261-w · Cited by 4
Energy absorption and dissipation characteristic of FG honeycomb reinforced laminate embedded with viscoelastic material in hygrothermal conditions under low-velocity impact
Wang, Y., Yan, H., Wang, L., Jansari, C., Bordas, S., & Zhou, X. (2024) · Mechanics of Advanced Materials and Structures · doi:10.1080/15376494.2024.2325103 · Cited by 4
Development of a continuum-based, meshless, finite element modeling approach for representation of trabecular bone indentation
Benais, R., Rycman, A., & McLachlin, S. D. (2024) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2024.106679 · Cited by 4
Bovine Serum Albumin‐Based Sponges as Biocompatible Adsorbents: Development, Characterization, and Perfluorooctane Sulfonate Removal Efficiency
Kaeek, M., Rajmiel, Y., Goldreich, O., & Khoury, L. R. (2025) · Small Science · doi:10.1002/smsc.202400497 · Cited by 4
Using the axial skeleton as armor: mechanical behavior of sea turtle carapaces throughout ontogeny
Lezcano, I. J., Wyneken, J., & Porter, M. E. (2025) · Journal of Experimental Biology · doi:10.1242/jeb.249959 · Cited by 4
Multiphysics Numerical Simulation on Bone Scaffolds under Fully Coupled Fluid-Solid-Thermo Model
Wang, Y., Sheng-min, W., Chen, Y., & Yan, X.-T. (2010) · doi:10.1109/iccms.2010.464 · Cited by 4
Processamento e caracterização de filtros cerâmicos fibrosos
Müller, D., Acchar, W., Silva, G. M. C., Moreira, E. A., Coury, J. R., Innocentini, M. D. D. M., Hotza, D., & Rambo, C. R. (2009) · Cerâmica · doi:10.1590/s0366-69132009000300012 · Cited by 4
Effect of Cork Loading on Mechanical and Thermal Properties of Silica-Ethylene-Propylene-Diene Monomer Composite
Gul, J., & Mirza, S. (2012) · Key engineering materials · doi:10.4028/www.scientific.net/kem.510-511.277 · Cited by 4
Fast-condensing nanofoams: Suppressing localization of intense stress waves
Zhao, C., & Qiao, Y. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.09.021 · Cited by 4
A void growth- and coalescence-dependent anisotropic damage model for polymeric foams
Kwon, S. H., Kim, J.-D., & Lee, J. (2020) · Continuum Mechanics and Thermodynamics · doi:10.1007/s00161-020-00926-9 · Cited by 4
Open system peridynamics
Schaller, E., Javili, A., & Steinmann, P. (2022) · Continuum Mechanics and Thermodynamics · doi:10.1007/s00161-022-01105-8 · Cited by 4
Design and testing of nanobiomaterials for orthopedic implants
Chakraborty, U., Bhanjana, G., Kaur, N., Kaur, G., Kaushik, A. K., Kumar, S., & Chaudhary, G. R. (2023) · Elsevier eBooks · doi:10.1016/b978-0-12-821240-0.00007-x · Cited by 4
PEEK Physical Surface Modification: Evaluation Of Particles Leaching Process
dos Santos, F. S. F., de Lima, G. G., Cruz, R. D. C. A. L., Pimentel, C. A., Ferreira, V. P., Cardoso, M. J. B., Rezende, R. A., & Fook, M. V. L. (2019) · Materials Research · doi:10.1590/1980-5373-mr-2018-0520 · Cited by 4
Microstructures and properties of cancellous bone of avascular necrosis of femoral heads
Yao, X., Peng, W. A. N. G., Dai, R.-C., & Yeh, H. Y. (2009) · Acta Mechanica Sinica · doi:10.1007/s10409-009-0309-8 · Cited by 4
Local analysis of trabecular bone fracture
Tassani, S., Demenegas, F., & Matsopoulos, G. K. (2011) · Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) · doi:10.1109/iembs.2011.6091748 · Cited by 4
Mechanical behavior and numerical analysis of corrugated wire mesh laminates
Choi, J., Shankar, K., & Tahtalı, M. (2012) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-011-0935-5 · Cited by 4
Biomecánica de los árboles: crecimiento, anatomía y morfología
Vargas, G. (2019) · Madera y Bosques · doi:10.21829/myb.2019.2531712 · Cited by 4
Biomechanical Behavior Characterization and Constitutive Models of Porcine Trabecular Tibiae
Quintana-Barcia, C., Rodríguez, C., Álvarez, G., & Maestro, A. (2021) · Biology · doi:10.3390/biology10060532 · Cited by 4
Finite Element Analysis of Foam Models Based on Regular and Irregular Arrays of Cubic Open Cells Having Uniform or Normal Distributions
Kornievsky, A., & Nasedkin, A. V. (2021) · Advanced structured materials · doi:10.1007/978-3-030-81705-3_15 · Cited by 4
Tissue specific auxin biosynthesis regulates leaf vein patterningPreprint
Kneuper, I., Teale, W., Dawson, J. E., Tsugeki, R., Palme, K. J., Katifori, E., & Ditengou, F. A. (2017) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.1101/184275 · Cited by 4
Mechanical properties of drying plant roots: Evolution of the longitudinal Young's modulus of chick-pea roots with dessicationPreprint
Vautrin, C., Kurowski, P., Genet, P., Hattali, L., Fabi, R. P. Y., & Kolb, É. (2018) · arXiv (Cornell University) · doi:10.48550/arxiv.1804.08879 · Cited by 4
Emergent honeycomb topology of the leaf spongy mesophyllPreprint
Borsuk, A. M., Roddy, A. B., Théroux‐Rancourt, G., & Brodersen, C. R. (2019) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.1101/852459 · Cited by 4
A state of the art on honeycomb cellular solids: Structures, properties, applications
Thatipelli, K. R., & Kalathur, H. (2025) · AIP conference proceedings · doi:10.1063/5.0250497 · Cited by 3
Biophotonic function of the calcium carbonate skeleton in Lithothamnion crispatum: A possible adaptation of coralline algae to low-light environments
Balestrieri, S., Rendina, F., Mocella, V., Bermejo, A., Russo, G. F., & Tommasi, E. D. (2025) · Acta Biomaterialia · doi:10.1016/j.actbio.2025.07.041 · Cited by 3
Symmetry breaking induces polarized bandgaps and anomalous elastic wave behavior in gyroid lattices
Carrillo-Muñoz, M. J., Mohammed, A. S., & Sharma, B. (2025) · Wave Motion · doi:10.1016/j.wavemoti.2025.103626 · Cited by 3
Oblique loading effects on compressional dynamic behavior and energy absorption process in novel bionic bi-gradient hierarchical asymmetric fractal bi-hexagonal tube structures
Fu, Q., Xu, S., Guang, X., & Deng, X. (2025) · Mechanics Based Design of Structures and Machines · doi:10.1080/15397734.2025.2563682 · Cited by 3
Porous Degradable Polyesters from Ring-Opening Polymerization within Oil-in-Oil Emulsions: Initiation, Catalysis, and Foaming
Ahmad, S., Binenthal, O., Yelin, K., & Silverstein, M. S. (2026) · European Polymer Journal · doi:10.1016/j.eurpolymj.2026.114514 · Cited by 3
Reconstruction of plant microstructure using distance weighted tessellation algorithm optimized by virtual segmentation
Liu, W., Zhang, L., Huang, J., & Xie, W. (2019) · Journal of Structural Biology · doi:10.1016/j.jsb.2019.08.008 · Cited by 3
Development of Patient-Specific Lattice Structured Femoral Stems Based on Finite Element Analysis and Machine Learning
Alkentar, R., Manó, S., Huri, D., & Mankovits, T. (2025) · Crystals · doi:10.3390/cryst15070650 · Cited by 3
3D Printing of Poly(methyl methacrylate) by Interfacial Photopolymerization
Mahesh, P. T., Chazot, C. A. C., Church, R. B., Durso, M. N., Thrasher, C. J., Creighton, M. A., & Hart, A. J. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c11228 · Cited by 3
Bone morphology and mechanical Behavior: New insights into cortical and trabecular failure under compression
Limzider, N., Rittel, D., & Shemtov‐Yona, K. (2025) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2025.107214 · Cited by 3
Metodología para el modelado del comportamiento mecánico de hueso esponjoso a partir de sus microestructuras
de Ingeniería, U. N. A. D. M. F., Ramírez, E. I., Ortiz, A., de Ingeniería, U. N. A. D. M. F., Schouwenaars, R., de Ingeniería, U. N. A. D. M. F., Ruiz-Cervantes, O., & de Ingeniería, U. N. A. D. M. F. (2010) · Ingeniería Investigación y Tecnología · doi:10.22201/fi.25940732e.2010.11n2.017 · Cited by 3
Research of elasticity for a corrugated wire mesh
Choi, J., Shankar, K., & Lee, J. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.05.019 · Cited by 3
Hierarchical Biological Materials
Ehrlich, H. (2019) · Biologically-inspired systems · doi:10.1007/978-3-319-92483-0_5 · Cited by 3
Power Law of Critical Buckling in Structural Members Supported by a Winkler Foundation
Sato, M., Harasawa, S., Konishi, Y., Maruyama, T., & Park, S.-J. (2016) · Journal of Mechanics · doi:10.1017/jmech.2016.112 · Cited by 3
Acoustic characterisation of a novel wood-cork composite material for architectural applications
Zheliazkova, M., Giglio, A. J., & Paoletti, I. (2020) · Virtual Community of Pathological Anatomy (University of Castilla La Mancha) · doi:10.48465/fa.2020.1094 · Cited by 3
A chronology of subterranean clover burr detachment mechanics and implications for seed harvestability
Moss, W. M., Nichols, P. G. H., Ryan, M. H., Foster, K. J., & Guzzomi, A. L. (2021) · Journal of The Royal Society Interface · doi:10.1098/rsif.2021.0625 · Cited by 3
Aramid Nanofibers Aerogel‐filled Wood‐based Carbon Material for Flexible Solid Supercapacitors
Niu, Q., Zhang, H., Gao, K., Tang, Q., Sun, X., Zhao, S., & Wang, L. (2022) · ChemNanoMat · doi:10.1002/cnma.202200001 · Cited by 3
Form-function relationship between trabecular bone architecture and biomechanical function in the horse humerus
Cadoret, N., Chaves‐Jacob, J., Linares, J., & Houssaye, A. (2022) · Procedia CIRP · doi:10.1016/j.procir.2022.06.054 · Cited by 3
Cellulose fibre foam templated porous epoxy composites: Wetting matters
Biegler, V., Verdross, P., Woodward, R. T., & Bismarck, A. (2024) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2024.108461 · Cited by 3
Biomechanical analysis of axial-radial integrated functional gradient material implants in healthy and osteoporotic bones
Ma, Y., Yang, Z.-P., Boshen, Y. U., Lyu, K., Wu, J. C., Baohua, C. H. E. N., Ma, K., Hu, Y., & Chen, D. (2025) · Dental Materials Journal · doi:10.4012/dmj.2024-222 · Cited by 3
Use of precursors for the production of cast metallic foams
Kroupová, I., Lichý, P., MERTA, V., & Lána, I. (2019) · Materiali in tehnologije · doi:10.17222/mit.2018.141 · Cited by 3
Experimental Investigations of 3D-Deformations in Additively Manufactured Pantographic Structures
Ganzosch, G., Barchiesi, E., Drobnicki, R., Pfaff, A., & Müller, W. H. (2020) · Lecture notes in mechanical engineering · doi:10.1007/978-3-030-49882-5_11 · Cited by 3
Modelling the elastic mechanical properties of bioactive glass-derived scaffolds
Baino, F., & Fiume, E. (2020) · Biomedical glasses · doi:10.1515/bglass-2020-0005 · Cited by 3
Characteristics of pre-strained polyisocyanurate foam: Deformation recovery and compressive mechanical behavior at cryogenic temperature
Kim, S., Kim, J.-D., Lee, D.-H., Kim, J., & Lee, J. (2021) · Journal of Cellular Plastics · doi:10.1177/0021955x211020293 · Cited by 3
Effect of Increasing Polyvinyl Alcohol Content on the Porous Structure and Mechanical Properties of Sol-Gel Derived Hybrids Foams
de Oliveira, A. A. R., Oréfice, R. L., Mansur, H. S., & Pereira, M. M. (2007) · Key engineering materials · doi:10.4028/www.scientific.net/kem.361-363.555 · Cited by 3
Failure retardation in body armor
Torres, F. G., & Lama, D. (2017) · Bioinspired Biomimetic and Nanobiomaterials · doi:10.1680/jbibn.16.00040 · Cited by 3
A novel fracture mechanics model explaining the axial penetration of bone-like porous, compressible solids by various orthopaedic implant tips
Kulper, S. A., Sze, K. Y., Fang, C. X., Ren, X., Guo, M. G., Schneider, K., Leung, F. K. L., Lu, W. W., & Ngan, A. H. W. (2018) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2018.01.025 · Cited by 3
Production and anodising of highly porous Ti–Ta–Zr–Co alloy for biomedical implant applications
Soran, M. R., & Mutlu, İ. (2018) · Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control · doi:10.1080/1478422x.2018.1527820 · Cited by 3
Mechanical and failure behaviors of lattice-plate hybrid structures
Liu, Z., Liu, P., Huang, W. D., Wong, W. H., Commillus, A. L., & Zhang, Y. (2019) · MRS Communications · doi:10.1557/mrc.2019.153 · Cited by 3
Evaluating a theoretical and an empirical model of “side effects” in cancellous bone
Bennison, M. B. L., Pilkey, A. K., & Lievers, W. B. (2021) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2021.05.022 · Cited by 3
Design Method of Porous Titanium Alloy Based on Meta-Structure
Yang, G., Guo, C., Zhang, Y., Yang, Z., & Chen, L. (2021) · Integrated ferroelectrics · doi:10.1080/10584587.2021.1911233 · Cited by 3
Marine Biopolymers in Bone Tissue Repair and Regeneration
Venkatesan, J., Lowe, B., Anil, S., Ealla, K. K. R., & Kim, S. (2017) · CRC Press eBooks · doi:10.1201/9781315313535-19 · Cited by 3
Monitoring plant water status via static uniaxial compression of the leaf lamina
Fuenzalida, T. I., Binks, O. J., Bryant, C. J., Wolfe, J., & Ball, M. C. (2022) · Plant Cell & Environment · doi:10.1111/pce.14383 · Cited by 3
Automatic identification of trabecular bone fracture
Tassani, S., Asvestas, P. A., Matsopoulos, G. K., & Baruffaldi, F. (2010) · World Congress on Medical Physics and Biomedical Engineering, September 7 - 12, 2009, Munich, Germany · doi:10.1007/978-3-642-13039-7_74 · Cited by 3
Mathematical Modeling of 3D Tissue Engineering Constructs
Almeida, H. A., & Bártolo, P. (2017) · Springer eBooks · doi:10.1007/978-3-319-40498-1_5-1 · Cited by 3
Development of Functionally Graded Materials for Innovation in Bone-Replacement Applications
Limmahakhun, S. (2017) · Queensland University of Technology · doi:10.5204/thesis.eprints.108053 · Cited by 3
Suitability of Polymer-Infiltrated-Ceramic-Networks for CAD/CAM based dental restorative materials
Coldea, A. (2014) · Otago University Research Archive (University of Otago) · Cited by 3
Homogénéisation automatique de milieux discrets périodiques : applications aux mousses polymères et aux milieux auxétiques
Reis, F. D. (2010) · doi:10.70675/8326025fz00e9z40e5za97bz996e7be94557 · Cited by 3
Finite element modelling of screw fixation in augmented and non-augmented cancellous bone
Kamane, P. B. (2012) · Cited by 3
Dynamics of Cell–Matrix Mechanical Interactions in Three Dimensions
Notbohm, J. (2013) · CaltechTHESIS (California Institute of Technology) · doi:10.7907/axd0-2d10 · Cited by 3
Impact of design strategy favoring powder removal on mechanical performance of bio-inspired porous architectures for laser-based powder-bed fusion additive manufacturing
Cadoret, N., Chaves‐Jacob, J., Celli, M.-A., & Linares, J. (2024) · Materials & Design · doi:10.1016/j.matdes.2024.113240 · Cited by 2
Comparative analysis of vibration isolation in second order hierarchical metamaterials
Tijjani, M. Z., Deng, J., Adamu, A., Tajudeen, H., & Wang, Z. (2025) · Smart Materials and Structures · doi:10.1088/1361-665x/ae053c · Cited by 2
Multipoint Correlations in Poisson Media
Shelley, A., Olson, A., Geraci, G., & Tartakovsky, D. M. (2025) · Physical Review Letters · doi:10.1103/325k-g4dr · Cited by 2
Exploring functional and phylogenetic variation in limb trabecular structure across amniote taxa
Reinecke, T. E., & Angielczyk, K. D. (2025) · Biological Journal of the Linnean Society · doi:10.1093/biolinnean/blaf073 · Cited by 2
Strain, substrate, and matrix selection for controlled growth of wood-fungi
Hofer, S., Nussbaum, N., Fischer, P., & Rühs, P. A. (2025) · Soft Matter · doi:10.1039/d5sm00749f · Cited by 2
Nickel‐Coated Hollow Glass Microspheres Enable Interface Strengthening and Enhanced Energy Absorption in Mg–Al Composite Foams Fabricated by Spark Plasma Sintering
Sun, S., Jiang, L., Tang, L., Gao, Q., Li, C., & Xu, L. (2025) · Advanced Engineering Materials · doi:10.1002/adem.202502007 · Cited by 2
In silico quantification of the stiffness perceived by cells inside porous collagen-based scaffolds
Santos-Lopes, O., Tzeranis, D. S., & Vavourakis, V. (2025) · Materials & Design · doi:10.1016/j.matdes.2025.115412 · Cited by 2
Mirror-symmetric piecewise linear graded design improves load-bearing stability and energy absorption in LPBF-fabricated Ti–6Al–4V Schwarz-P TPMS lattices
Ge, Y., Gong, Y., Chang, Z., & Yin, Y. (2026) · European Journal of Mechanics - A/Solids · doi:10.1016/j.euromechsol.2026.106174 · Cited by 2
From Geometry to Function: Programmable Mechanical Response in 3D‐Printed Adipose‐Inspired Soft Metamaterials
Berardo, A., Dolino, G., Coato, D., Gargiulo, P., & Carniel, E. L. (2026) · Advanced Functional Materials · doi:10.1002/adfm.77047 · Cited by 2
Bio-inspired calcium phosphate materials for hard-tissue repair
Cunningham, E., Walker, G., Buchanan, F., & Dunne, N. (2016) · Elsevier eBooks · doi:10.1016/b978-1-78242-338-6.00015-6 · Cited by 2
Comparative Study between Bone Tissue Engineering Scaffolds with Bull and Rat Cancellous Microarchitectures on Tissue Differentiations of Bone Marrow Stromal Cells: A Numerical Investigation
Zhang, X., Gong, H., Fan, R., & Fang, J. (2018) · Journal of Bionic Engineering · doi:10.1007/s42235-018-0079-8 · Cited by 2
The Effect of Design Parameters on Mechanical Characteristics of Porous CoCrMo Scaffold Manufactured by Additive Manufacturing
Pahang, U. M., Mohamed, S. R., Ghani, S. A. C., Pahang, U. M., Sawangsri, W., Azizi, M. Z., & Bhd, Z. E. S. (2021) · Journal of Sustainable Manufacturing in Transportation · doi:10.30880/jsmt.2021.01.01.006 · Cited by 2
Relaxation response of space lattices in the cubic system designed with architected strut, plate, and shell structural ligaments
Nawaz, M. N., Asif, M. T., Zaidi, A. A., & Khan, K. A. (2024) · Materials Today Communications · doi:10.1016/j.mtcomm.2024.109006 · Cited by 2
Dynamic behavior and strain rate sensitivity of lower-extremity metallic lattice bone implants fabricated by additive manufacturing: a focus on damping
Ghadami, S., Khajehzadeh, M., & Razfar, M. R. (2025) · Rapid Prototyping Journal · doi:10.1108/rpj-08-2024-0336 · Cited by 2
Microfluidic Production of Ultrathin, Handleable Collagen Sheets Exhibiting Toe‐heel Tensile Behavior
Zhang, Y., Malladi, S., Wang, B., Son, D. O., Hinz, B., Chaikof, E. L., & Günther, A. (2025) · Advanced Materials Technologies · doi:10.1002/admt.202401810 · Cited by 2
Wave propagation and critical conditions for energy focusing pattern transformation in anisotropic fluid-filled porous structures
Liu, Y., & Gao, L.-T. (2008) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2008.04.025 · Cited by 2
In vitro study on porous silver scaffolds prepared by electroplating method using cellular carbon skeleton as the substrate
Guo, M., Wang, X., Zhou, H., Li, L., Nie, F. L., Cheng, Y., & Zheng, Y. (2012) · Materials Science and Engineering C · doi:10.1016/j.msec.2012.02.011 · Cited by 2
Understanding the transition from positive to negative Poisson's ratio behavior in cellular materials and the potential for auxeticity in trabecular bone
Matheny, J. C. (2011) · OhioLink ETD Center (Ohio Library and Information Network) · Cited by 2
Formation of Porous Aluminum Solidified by Chemical Reaction of Pure Aluminum Powder and Pure Water
Nakayama, N., MOCHIZUKI, R., & SAWAMOTO, K. (2013) · TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A · doi:10.1299/kikaia.79.827 · Cited by 2
Preparation of Porous Scaffolds of Borosilicate Bioglass
Liu, X. (2008) · Journal of Inorganic Materials · doi:10.3724/sp.j.1077.2008.00322 · Cited by 2
Comparative Study on Mechanical Behavior after Deformation Recovery of Polymeric Foam for Ships and Offshore Structures
Kim, S.-K., Kim, J.-H., Lee, J.-H., Park, S., & Lee, J. (2016) · Journal of the Society of Naval Architects of Korea · doi:10.3744/snak.2016.53.3.195 · Cited by 2

Authors: Gibson, L. J.
Affiliations: Massachusetts Institute of Technology (US)
Corresponding author: Gibson, Lorna J.
ORCID: Gibson, Lorna J.
Venue: Journal of Biomechanics
Publisher: Elsevier BV
Published: 2005-03
Volume: 38
Issue: 3
Pages: 377-399
ISSN: 0021-9290 (ISSN-L)
DOI: 10.1016/j.jbiomech.2004.09.027
OpenAlex: W2003488635
Cited by: 961
References: 82
Citations by year: 2026: 42 · 2025: 45 · 2024: 46 · 2023: 49 · 2022: 59 · 2021: 66 · 2020: 62 · 2019: 51 · 2018: 57 · 2017: 64 · 2016: 50 · 2015: 40 · 2014: 50 · 2013: 50 · 2012: 39
FWCI: 8.64
Type: journal article
Language: en
Open access: closed
Licence: www.elsevier.com/tdm/userlicense/1.0/ (tdm)
Locations: Journal of Biomechanics (publishedVersion)
PubMed (publishedVersion)
Topics: Physical Sciences › Engineering › Mechanical Engineering › Cellular and Composite Structures
Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
Physical Sciences › Engineering › Civil and Structural Engineering › Topology Optimization in Engineering
Keywords: cellular materials, wood, cork, trabecular bone, honeycomb microstructure, mechanical efficiency, sandwich structures, tubular structures, plant stems, engineered biomaterials, tissue regeneration
MeSH terms: Animals, Biocompatible Materials, Biomechanical Phenomena, Bone and Bones, Humans, Models, Biological, Tissue Engineering

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Biomechanics of cellular solids

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks