Cited by 961Cellular and Composite StructuresAdvanced Materials and MechanicsTopology Optimization in Engineering

The DOI matches its Crossref record; 82 of the 82 references it cites were found in a registry or an index.

Biomechanics of cellular solids

Gibson, Lorna J.·2005·Journal of Biomechanics

DOI 10.1016/j.jbiomech.2004.09.027

Open this paper in CoChat — free account

Abstract

Materials with a cellular structure are widespread in nature and include wood, cork, plant parenchyma and trabecular bone. Natural cellular materials are often mechanically efficient: the honeycomb-like microstructure of wood, for instance, gives it an exceptionally high performance index for resisting bending and buckling. Here we review the mechanics of a wide range of natural cellular materials and examine their role in lightweight natural sandwich structures (e.g. iris leaves) and natural tubular structures (e.g. plant stems or animal quills). We also describe two examples of engineered biomaterials with a cellular structure, designed to replace or regenerate tissue in the body.

Integrity signals

Registry

Crossref · 10.1016/j.jbiomech.2004.09.027

Cites

82 of 82 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Self-citation
Foam Structures with a Negative Poisson's Ratio
Lakes, R. S. (1987) · Science · doi:10.1126/science.235.4792.1038 · Cited by 3,917
Metal Foams: A Design Guide
Ashby, M., Evans, A. G., Fleck, N., Gibson, L. J., Hutchinson, J., Wadley, H. N. G., & Delale, F. (2001) · Applied Mechanics Reviews · doi:10.1115/1.1421119 · Cited by 2,695
Self-citation
Materials Selection in Mechanical Design
Ashby, M., & Cebon, D. (2011) · Elsevier eBooks · doi:10.1016/c2009-0-25539-5 · Cited by 2,688
The compressive behavior of bone as a two-phase porous structure
Carter, D., & Hayes, W. (1977) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-197759070-00021 · Cited by 2,001
The mechanics of three-dimensional cellular materials
Gibson, I. J., & Ashby, M. F. (1982) · Proceedings of the Royal Society of London A Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0088 · Cited by 1,895
Analysis and design of structural sandwich panels
Ogorkiewicz, R. M. (1970) · Composites · doi:10.1016/0010-4361(70)90244-2 · Cited by 1,762
Mechanics of Wood and Wood Composites
Bodig, J., & Jayne, B. A. (1982) · Medical Entomology and Zoology · Cited by 1,473
The mechanics of two-dimensional cellular materials
Gibson, L. J., Ashby, M. F., Schajer, G. S., & Robertson, C. I. (1982) · Proceedings of the Royal Society of London A Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0087 · Cited by 1,280
Self-citation
Preparation and characterization of poly(l-lactic acid) foams
Mikos, A. G., Thorsen, A. J., Czerwonka, L. A., Bao, Y., Langer, R., Winslow, D. N., & Vacanti, J. P. (1994) · Polymer · doi:10.1016/0032-3861(94)90953-9 · Cited by 1,196

Flagged first, then by citations

Show all 82 references

Research works printed but not linked: 7

Bensusan, J.S., Davy, D.T., Heiple, K.G., Verdin, P.J., 1983. 19th Annual Orthopaedic Research Society Meeting 8, pp. 132.
Goodman, 1971, Orthotropic strength of wood in compression, Wood Science, 4, 83
Goree, 1962, Elastic stability of circular cylindrical shells stabilized by a soft elastic core, Experimental Mechanics, 2, 142
Guo, X.E., Kim, C.H., 1999. Effects of age-related bone loss: A 3D microstructural simulation. Proceedings of the 1999 Bioengineering Conference American Society of Mechanical Engineers Bioengineering Division, vol 42. pp. 327–328.
Lhommeau, 1998, Preparation of highly interconnected porous tyrosine-derived polycarbonate scaffolds, Tissue Engineering, 4, 468
Maddox, R.D., Carroll, J.W., Hollister, S.J., Mazumdar, J., Krebsbach, P.H., 2003. Gene/cell delivery from designed titanium scaffolds made by free-form fabrication. Society for Biomaterials 29th Annual Meeting Transactions. Reno, Nevada.
Patel, 1970, Structural features and mechanical properties of rigid cellular plastics, Journal of Materials, 5, 909

Sorted by citations

Items 201–300 of 959

Porous Nb-Ti-Ta alloy scaffolds for bone tissue engineering: Fabrication, mechanical properties and in vitro/vivo biocompatibility
Liu, J., Ruan, J., Chang, L., Yang, H., & Ruan, W. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.04.088 · Cited by 61
Bending mechanics of the red-eared slider turtle carapace
Achrai, B., Bar‐On, B., & Wagner, H. D. (2013) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2013.09.009 · Cited by 60
Ultralight Conductive and Elastic Aerogel for Skeletal Muscle Atrophy Regeneration
Wang, L., Zhang, X., He, Y., Wang, Y., Zhong, W., Mequanint, K., Qiu, X., & Xing, M. M. Q. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201806200 · Cited by 59
Polymer scaffolds with interconnected spherical pores and controlled architecture for tissue engineering: Fabrication, mechanical properties, and finite element modeling
Diego, R. B., Estellés, J. M., Sanz, J. A., García‐Aznar, J. M., & Salmerón‐Sánchez, M. (2006) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.30683 · Cited by 59
Structure and mechanical properties of naturally occurring lightweight foam-filled cylinder–The peacock’s tail coverts shaft and its components
Liu, Z. Q., Jiao, D., Meyers, M. A., & Zhang, Z. F. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.01.035 · Cited by 58
Crack initiation and fracture toughness of random Voronoi honeycombs
Christodoulou, I. T., & Tan, P. J. (2013) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2013.03.017 · Cited by 58
Out-of-plane crushing behavior of hybrid hierarchical square honeycombs
Wang, Z., Deng, J., He, K., & Tao, Y. (2022) · Thin-Walled Structures · doi:10.1016/j.tws.2022.110051 · Cited by 58
Bioactive Glass-Based Scaffolds for Bone Tissue Engineering
Will, J., Gerhardt, L. ‐., & Boccaccini, A. R. (2011) · Advances in biochemical engineering, biotechnology · doi:10.1007/10_2011_106 · Cited by 58
Composite Finite Elements for Elliptic Boundary Value Problems with Discontinuous Coefficients
Sauter, S. A., & Warnke, R. (2005) · Computing · doi:10.1007/s00607-005-0150-2 · Cited by 58
Bio-inspired method based on bone architecture to optimize the structure of mechanical workspieces
Audibert, C., Chaves‐Jacob, J., Linares, J., & Lopez, Q.-A. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.10.013 · Cited by 58
The Puzzle of the Walnut Shell: A Novel Cell Type with Interlocked Packing
Antreich, S. J., Xiao, N., Huss, J. C., Horbelt, N., Eder, M., Weinkamer, R., & Gierlinger, N. (2019) · Advanced Science · doi:10.1002/advs.201900644 · Cited by 58
Densification of Bamboo: State of the Art
Kadivar, M., Gauss, C., Ghavami, K., & Savastano, H. (2020) · Materials · doi:10.3390/ma13194346 · Cited by 57
Crushing and parametric studies of polygonal substructures based hierarchical cellular honeycombs with non-uniform wall thickness
Zhang, Y., Liu, G., Ye, J., & Lin, Y. (2022) · Composite Structures · doi:10.1016/j.compstruct.2022.116087 · Cited by 57
Fatigue behavior of Ti–6Al–4V foams processed by magnesium space holder technique
Aşık, E. E., & Bor, Ş. (2014) · Materials Science and Engineering A · doi:10.1016/j.msea.2014.10.068 · Cited by 57
The effect of axial strain on crystalline cellulose in Norway spruce
Peura, M., Kölln, K., Grotkopp, I., Saranpää, P., Müller, M., & Serimaa, R. E. (2007) · Wood Science and Technology · doi:10.1007/s00226-007-0141-x · Cited by 57
Fibroblast Compatibility on Scaffold Hydrogels Prepared from Agave Tequilana Weber Bagasse for Tissue Regeneration
Tovar-Carrillo, K. L., Sueyoshi, S. S., Tagaya, M., & Kobayashi, T. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie401793w · Cited by 57
Time dependent response of architectured Neovius foams
Khan, K. A., & Al‐Rub, R. K. A. (2017) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2017.03.017 · Cited by 57
Microimaging-informed continuum micromechanics accurately predicts macroscopic stiffness and strength properties of hierarchical plant culm materials
Gangwar, T., & Schillinger, D. (2019) · Mechanics of Materials · doi:10.1016/j.mechmat.2019.01.009 · Cited by 56
An origami-inspired design of highly efficient cellular cushion materials
Dalaq, A. S., Khazaaleh, S., & Daqaq, M. F. (2023) · Applied Materials Today · doi:10.1016/j.apmt.2023.101835 · Cited by 56
Effect of pore geometry and loading direction on deformation mechanism of rapid prototyped scaffolds
Amirkhani, S., Bagheri, R., & Yazdi, A. Z. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.01.044 · Cited by 56
Volume to density relation in adult human bone tissue
Tassani, S., Öhman‐Mägi, C., Baruffaldi, F., Baleani, M., & Viceconti, M. (2010) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2010.08.032 · Cited by 55
Development of novel three‐dimensional scaffolds based on bacterial nanocellulose for tissue engineering and regenerative medicine: Effect of processing methods, pore size, and surface area
Osorio, M., Fernández‐Morales, P., Gañán, P. F., Zuluaga, R., Kerguelén, H., Ortiz, I. C., & Castro, C. I. (2018) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36532 · Cited by 57
Highly Effective Multifunctional Solar Evaporator with Scaffolding Structured Carbonized Wood and Biohydrogel
Chen, J., Jian, M., Yang, X., Xia, X., Pang, J., Qiu, R., & Wu, S. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c11399 · Cited by 55
Thermal Conductivity of Very Porous Kaolin‐Based Ceramics
Bourret, J., Michot, A., Tessier-Doyen, N., Naït‐Ali, B., Pennec, F., Alzina, A., Vicente, J., Peyratout, C. S., & Smith, D. S. (2014) · Journal of the American Ceramic Society · doi:10.1111/jace.12767 · Cited by 52
Compression and buckling of microarchitectured Neovius-lattice
Abueidda, D., Elhebeary, M., Shiang, C.-S., Al‐Rub, R. K. A., & Jasiuk, I. (2020) · Extreme Mechanics Letters · doi:10.1016/j.eml.2020.100688 · Cited by 52
3D plastic collapse and brittle fracture surface models of trabecular bone from asymptotic homogenization method
Goda, I., & Ganghoffer, J.-F. (2015) · International Journal of Engineering Science · doi:10.1016/j.ijengsci.2014.10.007 · Cited by 51
Fabrication, morphology and mechanical properties of Ti and metastable Ti-based alloy foams for biomedical applications
Rivard, J., Braïlovski, V., Dubinskiy, S., & Дмитриевич, П. С. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.09.033 · Cited by 51
Design, optimization, and selective laser melting of vin tiles cellular structure-based hip implant
Abate, K. M., Nazir, A., & Jeng, J. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-06323-5 · Cited by 50
Anisotropy-inspired, simulation-guided design and 3D printing of microlattice metamaterials with tailored mechanical-transport performances
Zhang, L., Song, B., Choi, S.-K., Yao, Y., & Shi, Y. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.109837 · Cited by 50
Multi-scale mechanical and morphological characterisation of sintered porous magnesium-based scaffolds for bone regeneration in critical-sized defects
Bonithon, R., Kao, A. P., Fernández, M. P., Dunlop, J. N., Blunn, G. W., Witte, F., & Tozzi, G. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.03.068 · Cited by 49
Microstructure and properties of LZSA glass-ceramic foams
Trichês, E. D. S., Rambo, C. R., Hotza, D., de Oliveira, A. P. N., Fey, T., & Greil, P. (2007) · Materials Science and Engineering A · doi:10.1016/j.msea.2007.05.098 · Cited by 49
Multiscale investigation of the functional properties of the human femur
Cristofolini, L., Taddei, F., Baleani, M., Baruffaldi, F., Stea, S., & Viceconti, M. (2008) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2008.0077 · Cited by 49
Micromechanical models for porous and cellular materials in linear elasticity and viscoelasticity
Ghezal, M. I. E., Maalej, Y., & Doghri, I. (2013) · Computational Materials Science · doi:10.1016/j.commatsci.2012.12.021 · Cited by 49
Compressive behaviour of bovine cancellous bone and bone analogous materials, microCT characterisation and FE analysis
Guillén-Girón, T., Zhang, Q.-H., Tozzi, G., Ohrndorf, A., Christ, H., & Tong, J. (2011) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2011.05.015 · Cited by 49
Classification of Biomaterial Functionality
Arjunan, A., Baroutaji, A., Praveen, A. S., Robinson, J., & Wang, C. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-815732-9.00027-9 · Cited by 53
Additive Manufactured Magnesium-Based Scaffolds for Tissue Engineering
Antoniac, I., Mănescu, V., Păltânea, G., Antoniac, A., Nemoianu, I. V., Petrescu, M., Dura, H., & Bodog, A. (2022) · Materials · doi:10.3390/ma15238693 · Cited by 50
Experimental and computational analysis of energy absorption characteristics of three biomimetic lattice structures under compression
Vafaeefar, M., Moerman, K. M., & Vaughan, T. J. (2023) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2023.106328 · Cited by 48
Bioactive glass with biocompatible polymers for bone applications
Sonatkar, J., & Kandasubramanian, B. (2021) · European Polymer Journal · doi:10.1016/j.eurpolymj.2021.110801 · Cited by 48
Anisotropy and inhomogeneity of the trabecular structure can describe the mechanical strength of osteoarthritic cancellous bone
Tassani, S., Öhman‐Mägi, C., Baleani, M., Baruffaldi, F., & Viceconti, M. (2010) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2009.11.034 · Cited by 48
Crushing behavior of biomimetic hierarchical multi-cell thin-walled tubes under multi-angle loading
Gong, C., Meng, C., Chong, Q., Chen, L., & Guo, Y. (2025) · Engineering Structures · doi:10.1016/j.engstruct.2025.119996 · Cited by 47
Bioactive glass–gelatin hybrids: building scaffolds with enhanced calcium incorporation and controlled porosity for bone regeneration
Lao, J., Dieudonné, X., Fayon, F., Montouillout, V., & Jallot, É. (2016) · Journal of Materials Chemistry B · doi:10.1039/c5tb02345a · Cited by 47
On the effect of throughout layer thickness variation on properties of additively manufactured cellular titanium structures
Sheydaeian, E., Fishman, Z., Vlasea, M., & Toyserkani, E. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.08.017 · Cited by 47
Multi-property cellular material design approach based on the mechanical behaviour analysis of the reinforced lattice structure
Ren, X., Xiao, L., & Hao, Z. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107785 · Cited by 47
Objective CT-Based Metrics of Articular Fracture Severity to Assess Risk for Posttraumatic Osteoarthritis
Thomas, T. P., Anderson, D. D., Mosqueda, T., Hofwegen, C. V., Hillis, S. L., Marsh, J. L., & Brown, T. D. (2010) · Journal of Orthopaedic Trauma · doi:10.1097/bot.0b013e3181d7a0aa · Cited by 47
Superlative mechanical energy absorbing efficiency discovered through self-driving lab-human partnership
Snapp, K. L., Verdier, B., Gongora, A. E., Silverman, S., Adesiji, A. D., Morgan, E. F., Lawton, T. J., Whiting, E., & Brown, K. A. (2024) · Nature Communications · doi:10.1038/s41467-024-48534-4 · Cited by 46
Toughening and strengthening mechanisms of biological materials: A review
Feng, X., Zhao, Z.-L., Yan, Y., & Zhao, H. (2025) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2025.100988 · Cited by 47
Estimation of the effective properties of two-dimensional cellular materials: a review
Ongaro, F. (2018) · Theoretical and Applied Mechanics Letters · doi:10.1016/j.taml.2018.04.010 · Cited by 46
Organismal Design and Biomimetics: A Problem of Scale
Perricone, V., Santulli, C., Rendina, F., & Langella, C. (2021) · Biomimetics · doi:10.3390/biomimetics6040056 · Cited by 48
Technologies for Multilayered Scaffolds Suitable for Interface Tissue Engineering
Nooeaid, P., Roether, J. A., Weber, E., Schubert, D. W., & Boccaccini, A. R. (2013) · Advanced Engineering Materials · doi:10.1002/adem.201300072 · Cited by 46
Type and orientation of yielded trabeculae during overloading of trabecular bone along orthogonal directions
Shi, X., Sherry Liu, X., Wang, X., Edward Guo, X., & Niebur, G. L. (2010) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2010.05.032 · Cited by 45
Modeling the onset and propagation of trabecular bone microdamage during low-cycle fatigue
Kosmopoulos, V., Schizas, C., & Keller, T. S. (2008) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2007.10.020 · Cited by 44
PLA toughening via bamboo-inspired 3D printed structural design
Svatík, J., Lepcio, P., Ondreáš, F., Zárybnická, K., Zbončák, M., Menčík, P., & Jančář, J. (2021) · Polymer Testing · doi:10.1016/j.polymertesting.2021.107405 · Cited by 46
Numerical analysis of low-speed impact response of sandwich panels with bio-inspired diagonal-enhanced square honeycomb core
Li, Q., & Sun, B. (2022) · International Journal of Impact Engineering · doi:10.1016/j.ijimpeng.2022.104430 · Cited by 44
Development of porous hydroxyapatite/PVA/gelatin/alginate hybrid flexible scaffolds with improved mechanical properties for bone tissue engineering
El-Bahrawy, N. R., Elgharbawy, H., Elmekawy, A. F., Salem, M. L., & Morsy, R. (2024) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2024.129332 · Cited by 44
Mapping anisotropy of the proximal femur for enhanced image based finite element analysis
Enns-Bray, W. S., Owoc, J. S., Nishiyama, K. K., & Boyd, S. K. (2014) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2014.08.020 · Cited by 44
Thermoset-Cross-Linked Lignocellulose: A Moldable Plant Biomass
Karumuri, S., Hızıroǧlu, S., & Kalkan, A. K. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am508832d · Cited by 43
Characterization of thermal and acoustic insulation of chicken feather reinforced composites
Bessa, J., de Souza, J. M., Lopes, J. B., Sampaio, J., Mota, C., Cunha, F., & Fangueiro, R. M. E. S. (2017) · Procedia Engineering · doi:10.1016/j.proeng.2017.07.066 · Cited by 44
Lightweight Self‐Forming Super‐Elastic Mechanical Metamaterials with Adaptive Stiffness
Wu, R., Roberts, P. C. E., Lyu, S., Zheng, F., Soutis, C., Diver, C., Zhou, D., Li, L., & Deng, Z. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202008252 · Cited by 43
Printability and mechanical behavior as a function of base material, structure, and a wide range of porosities for polymer lattice structures fabricated by vat-based 3D printing
Peloquin, J., Han, Y., & Gall, K. (2023) · Additive manufacturing · doi:10.1016/j.addma.2023.103892 · Cited by 46
Biodegradable polylactide/hydroxyapatite nanocomposite foam scaffolds for bone tissue engineering applications
Delabarde, C., Plummer, C. J. G., Bourban, P. ‐., & Månson, J. E. (2012) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-012-4619-1 · Cited by 43
Microcellular Al 2 O 3 Ceramics from Wood for Filter Applications
Rambo, C. R., Andrade, T. E., Fey, T., Sieber, H., Martinelli, A. E., & Greil, P. (2008) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2007.02223.x · Cited by 43
Engineered Hybrid Scaffolds of Poly(vinyl alcohol)/Bioactive Glass for Potential Bone Engineering Applications: Synthesis, Characterization, Cytocompatibility, and Degradation
Costa, H. S., Mansur, A. A. P., Pereira, M. M., & Mansur, H. S. (2011) · Journal of Nanomaterials · doi:10.1155/2012/718470 · Cited by 42
Cellulose-Templated Graphene Monoliths with Anisotropic Mechanical, Thermal, and Electrical Properties
Zhang, R., Chen, Q., Zhen, Z., Jiang, X., Zhong, M., & Zhu, H. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04808 · Cited by 42
3D ink-extrusion printing and sintering of Ti, Ti-TiB and Ti-TiC microlattices
Song, B., Kenel, C., & Dunand, D. C. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101412 · Cited by 42
Mechanical properties and pore structure deformation behaviour of biomedical porous titanium
Wang, X., Li, J., Hu, R., & Kou, H. (2015) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(15)63756-6 · Cited by 42
Bone material properties and fracture analysis: Needle insertion for spinal surgery
Teoh, S. H., & Chui, C. K. (2007) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2007.06.004 · Cited by 42
On the Road to Personalized Medicine: Multiscale Computational Modeling of Bone Tissue
Podshivalov, L., Fischer, A., & Bar‐Yoseph, P. (2014) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-014-9120-1 · Cited by 40
Mapping nano-scale mechanical heterogeneity of primary plant cell walls
Yakubov, G. E., Bonilla, M. R., Chen, H., Doblin, M. S., Bacic, A., Gidley, M. J., & Stokes, J. R. (2016) · Journal of Experimental Botany · doi:10.1093/jxb/erw117 · Cited by 41
Composite bending-dominated hollow nanolattices: A stiff, cyclable mechanical metamaterial
Deng, B., Xu, R., Zhao, K., Lu, Y., Ganguli, S., & Cheng, G. J. (2018) · Materials Today · doi:10.1016/j.mattod.2018.03.027 · Cited by 41
Mesenchymal stem cell proliferation and differentiation on load-bearing trabecular Nitinol scaffolds
Gotman, I., Ben‐David, D., Unger, R. E., Böse, T., Gutmanas, E. Y., & Kirkpatrick, C. J. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.05.030 · Cited by 41
Design of Euplectella aspergillum based bionic thin tubes for impact absorbing application under different loading conditions
Sharma, D., & Hiremath, S. S. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.01.199 · Cited by 40
Predicting the influence of geometric imperfections on the mechanical response of 2D and 3D periodic trusses
Glaesener, R. N., Kumar, S., Lestringant, C., Butruille, T., Portela, C. M., & Kochmann, D. M. (2023) · Acta Materialia · doi:10.1016/j.actamat.2023.118918 · Cited by 40
Dynamic compressive behavior of functionally graded triply periodic minimal surface cellular structures
Liang, Y., He, H., Yin, J., Huang, J., Wu, Z., Yao, X., & Liu, Y. (2024) · Engineering Structures · doi:10.1016/j.engstruct.2024.118260 · Cited by 40
Microcomputed tomography and microfinite element modeling for evaluating polymer scaffolds architecture and their mechanical properties
Alberich‐Bayarri, Á., Moratal, D., Ivirico, J. L. E., Hernández, J. C. R., Vallés‐Lluch, A., Martí‐Bonmatí, L., Estellés, J. M., Mano, J. F., Pradas, M. M., Ribelles, J. L. G., et al. (2009) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31389 · Cited by 40
Pressurized honeycombs as soft-actuators: a theoretical study
Guiducci, L., Fratzl, P., Brechet, Y. J. M., & Dunlop, J. (2014) · Journal of The Royal Society Interface · doi:10.1098/rsif.2014.0458 · Cited by 40
Freeze-casting for PLGA/carbonated apatite composite scaffolds: Structure and properties
Schardosim, M. G., Soulié, J., Poquillon, D., Cazalbou, S., Duployer, B., Tenailleau, C., Rey, C. C., Hübler, R., & Combes, C. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.03.302 · Cited by 40
Voronoi-Like Grid Systems for Tall Buildings
Angelucci, G., & Mollaioli, F. (2018) · Frontiers in Built Environment · doi:10.3389/fbuil.2018.00078 · Cited by 40
Correlation Between the Structure and Compressive Property of PMMA Microcellular Foams Fabricated by Supercritical CO2 Foaming Method
Zhang, R., Ju, C. A., Zhu, Y., Zhang, J., Luo, G., Cao, P., Shen, Q., & Zhang, L. (2020) · Polymers · doi:10.3390/polym12020315 · Cited by 40
Novel hyperelastic models for large volumetric deformations
Moerman, K. M., Fereidoonnezhad, B., & McGarry, P. (2020) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2020.01.019 · Cited by 40
Radially graded porous structure design for laser powder bed fusion additive manufacturing of Ti-6Al-4V alloy
Kas, M., & Yılmaz, O. (2021) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2021.117186 · Cited by 40
Impact of Cell‐wall Structure and Composition on Plant Freezing Tolerance
Panter, P. E., Panter, J. R., & Knight, H. (2020) · Annual Plant Reviews online · doi:10.1002/9781119312994.apr0746 · Cited by 40
Fatigue damage in cancellous bone: An experimental approach from continuum to micro scale
Dendorfer, S., Maier, H. J., & Hammer, J. (2008) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2008.03.003 · Cited by 39
Impact response and energy absorption of human skull cellular bones
Wu, Q., Ma, L., Liu, Q., Feng, L., Wang, Z., Ohrndorf, A., Christ, H., & Xiong, J. (2018) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2018.02.018 · Cited by 39
Microfluidic Thermally Activated Materials for Rapid Control of Macroscopic Compliance
Balasubramanian, A., Standish, M., & Bettinger, C. J. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201304037 · Cited by 38
Mechanical properties of open-cell foam synthetic thoracic vertebrae
Johnson, A. E., & Keller, T. S. (2007) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-007-3158-7 · Cited by 39
Effects of sodium hypochlorite on Agave tequilana Weber bagasse fibers used to elaborate cyto and biocompatible hydrogel films
Tovar-Carrillo, K. L., Nakasone, K., Sugita, S., Tagaya, M., & Kobayashi, T. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.06.023 · Cited by 39
Size dependent static and dynamic behavior of trabecular bone based on micromechanical models of the trabecular architecture
Goda, I., Rahouadj, R., & Ganghoffer, J. (2013) · International Journal of Engineering Science · doi:10.1016/j.ijengsci.2013.06.013 · Cited by 38
Finite element modelling approaches for well-ordered porous metallic materials for orthopaedic applications: cost effectiveness and geometrical considerations
González, F. J. Q., & Nuño, N. (2015) · Computer Methods in Biomechanics & Biomedical Engineering · doi:10.1080/10255842.2015.1075009 · Cited by 38
Effects of cell-wall instability and local failure on the response of closed-cell polymeric foams subjected to dynamic loading
Koohbor, B., Ravindran, S., & Kidane, A. (2017) · Mechanics of Materials · doi:10.1016/j.mechmat.2017.03.017 · Cited by 38
Climate‐Dependent Heat‐Triggered Opening Mechanism of Banksia Seed Pods
Huss, J. C., Schoeppler, V., Merritt, D. J., Best, C., Maire, É., Adrien, J., Spaeker, O., Janßen, N., Gladisch, J., Gierlinger, N., et al. (2017) · Advanced Science · doi:10.1002/advs.201700572 · Cited by 39
Motion compensated micro-CT reconstruction for in-situ analysis of dynamic processes
Schryver, T. D., Dierick, M., Heyndrickx, M., Stappen, J. F. V., Boone, M. A., Hoorebeke, L. V., & Boone, M. (2018) · Scientific Reports · doi:10.1038/s41598-018-25916-5 · Cited by 38
Four hundred years of cork imaging: New advances in the characterization of the cork structure
Crouvisier-Urion, K., Chanut, J., Lagorce-Tachon, A., Winckler, P., Wang, Z., Verboven, P., Nicolaï, B. M., Lherminier, J., Ferret, É., Gougeon, R. D., et al. (2019) · Scientific Reports · doi:10.1038/s41598-019-55193-9 · Cited by 38
Therapeutic cobalt ion incorporated in poly(vinyl alcohol)/bioactive glass scaffolds for tissue engineering
de Laia, A. G. S., Barrioni, B. R., Valverde, T. M., Goes, A. M., de Sá, M. A., & Pereira, M. M. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-04644-0 · Cited by 38
Systematic characterization of porosity and mass transport and mechanical properties of porous polyurethane scaffolds
Wang, Y.-F., Barrera, C. M., Dauer, E. A., Gu, W., Andreopoulos, F. M., & Huang, C. ‐. C. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.09.029 · Cited by 37
Implicit-Function-Based Design and Additive Manufacturing of Triply Periodic Minimal Surfaces Scaffolds for Bone Tissue Engineering
Tripathi, Y. M., Shukla, M., & Bhatt, A. D. (2019) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-019-04457-6 · Cited by 37
Current interpretations on the in vivo response of bone to additively manufactured metallic porous scaffolds: A review
Deering, J., & Grandfield, K. (2021) · Biomaterials and Biosystems · doi:10.1016/j.bbiosy.2021.100013 · Cited by 36
Density and architecture have greater effects on the toughness of trabecular bone than damage
Garrison, J. G., Slaboch, C. L., & Niebur, G. L. (2009) · Bone · doi:10.1016/j.bone.2008.12.030 · Cited by 37
Biomechanical properties and clinical significance of cancellous bone in proximal femur: A review
Wang, H., Zhang, Y., Ren, C., Ding, K., Zhang, Q., Zhu, Y., & Chen, W. (2023) · Injury · doi:10.1016/j.injury.2023.03.010 · Cited by 36
Macroporous Alumina Ceramics with Aligned Microporous Walls by Unidirectionally Freezing Foamed Aqueous Ceramic Suspensions
He-Jin, Y. O. O. N., Kim, U., Kim, J., Koh, Y., Choi, W., & Kim, H. (2010) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2010.03627.x · Cited by 36
An Experimental Study on the Structural and Mechanical Properties of Polyvinyl Alcohol Sponge Using Different Stress–Strain Definitions
Karimi, A., Navidbakhsh, M., & Haghi, A. M. (2014) · Advances in Polymer Technology · doi:10.1002/adv.21441 · Cited by 36

Authors: Gibson, L. J.
Affiliations: Massachusetts Institute of Technology (US)
Corresponding author: Gibson, Lorna J.
ORCID: Gibson, Lorna J.
Venue: Journal of Biomechanics
Publisher: Elsevier BV
Published: 2005-03
Volume: 38
Issue: 3
Pages: 377-399
ISSN: 0021-9290 (ISSN-L)
DOI: 10.1016/j.jbiomech.2004.09.027
OpenAlex: W2003488635
Cited by: 961
References: 82
Citations by year: 2026: 42 · 2025: 45 · 2024: 46 · 2023: 49 · 2022: 59 · 2021: 66 · 2020: 62 · 2019: 51 · 2018: 57 · 2017: 64 · 2016: 50 · 2015: 40 · 2014: 50 · 2013: 50 · 2012: 39
FWCI: 8.64
Type: journal article
Language: en
Open access: closed
Licence: www.elsevier.com/tdm/userlicense/1.0/ (tdm)
Locations: Journal of Biomechanics (publishedVersion)
PubMed (publishedVersion)
Topics: Physical Sciences › Engineering › Mechanical Engineering › Cellular and Composite Structures
Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
Physical Sciences › Engineering › Civil and Structural Engineering › Topology Optimization in Engineering
Keywords: cellular materials, wood, cork, trabecular bone, honeycomb microstructure, mechanical efficiency, sandwich structures, tubular structures, plant stems, engineered biomaterials, tissue regeneration
MeSH terms: Animals, Biocompatible Materials, Biomechanical Phenomena, Bone and Bones, Humans, Models, Biological, Tissue Engineering

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Biomechanics of cellular solids

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks