Cited by 961Cellular and Composite StructuresAdvanced Materials and MechanicsTopology Optimization in Engineering

The DOI matches its Crossref record; 82 of the 82 references it cites were found in a registry or an index.

Biomechanics of cellular solids

Gibson, Lorna J.·2005·Journal of Biomechanics

DOI 10.1016/j.jbiomech.2004.09.027

Open this paper in CoChat — free account

Abstract

Materials with a cellular structure are widespread in nature and include wood, cork, plant parenchyma and trabecular bone. Natural cellular materials are often mechanically efficient: the honeycomb-like microstructure of wood, for instance, gives it an exceptionally high performance index for resisting bending and buckling. Here we review the mechanics of a wide range of natural cellular materials and examine their role in lightweight natural sandwich structures (e.g. iris leaves) and natural tubular structures (e.g. plant stems or animal quills). We also describe two examples of engineered biomaterials with a cellular structure, designed to replace or regenerate tissue in the body.

Integrity signals

Registry

Crossref · 10.1016/j.jbiomech.2004.09.027

Cites

82 of 82 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Self-citation
Foam Structures with a Negative Poisson's Ratio
Lakes, R. S. (1987) · Science · doi:10.1126/science.235.4792.1038 · Cited by 3,917
Metal Foams: A Design Guide
Ashby, M., Evans, A. G., Fleck, N., Gibson, L. J., Hutchinson, J., Wadley, H. N. G., & Delale, F. (2001) · Applied Mechanics Reviews · doi:10.1115/1.1421119 · Cited by 2,695
Self-citation
Materials Selection in Mechanical Design
Ashby, M., & Cebon, D. (2011) · Elsevier eBooks · doi:10.1016/c2009-0-25539-5 · Cited by 2,688
The compressive behavior of bone as a two-phase porous structure
Carter, D., & Hayes, W. (1977) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-197759070-00021 · Cited by 2,001
The mechanics of three-dimensional cellular materials
Gibson, I. J., & Ashby, M. F. (1982) · Proceedings of the Royal Society of London A Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0088 · Cited by 1,895
Analysis and design of structural sandwich panels
Ogorkiewicz, R. M. (1970) · Composites · doi:10.1016/0010-4361(70)90244-2 · Cited by 1,762
Mechanics of Wood and Wood Composites
Bodig, J., & Jayne, B. A. (1982) · Medical Entomology and Zoology · Cited by 1,473
The mechanics of two-dimensional cellular materials
Gibson, L. J., Ashby, M. F., Schajer, G. S., & Robertson, C. I. (1982) · Proceedings of the Royal Society of London A Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0087 · Cited by 1,280
Self-citation
Preparation and characterization of poly(l-lactic acid) foams
Mikos, A. G., Thorsen, A. J., Czerwonka, L. A., Bao, Y., Langer, R., Winslow, D. N., & Vacanti, J. P. (1994) · Polymer · doi:10.1016/0032-3861(94)90953-9 · Cited by 1,196

Show all 82 references

Research works printed but not linked: 7

Bensusan, J.S., Davy, D.T., Heiple, K.G., Verdin, P.J., 1983. 19th Annual Orthopaedic Research Society Meeting 8, pp. 132.
Goodman, 1971, Orthotropic strength of wood in compression, Wood Science, 4, 83
Goree, 1962, Elastic stability of circular cylindrical shells stabilized by a soft elastic core, Experimental Mechanics, 2, 142
Guo, X.E., Kim, C.H., 1999. Effects of age-related bone loss: A 3D microstructural simulation. Proceedings of the 1999 Bioengineering Conference American Society of Mechanical Engineers Bioengineering Division, vol 42. pp. 327–328.
Lhommeau, 1998, Preparation of highly interconnected porous tyrosine-derived polycarbonate scaffolds, Tissue Engineering, 4, 468
Maddox, R.D., Carroll, J.W., Hollister, S.J., Mazumdar, J., Krebsbach, P.H., 2003. Gene/cell delivery from designed titanium scaffolds made by free-form fabrication. Society for Biomaterials 29th Annual Meeting Transactions. Reno, Nevada.
Patel, 1970, Structural features and mechanical properties of rigid cellular plastics, Journal of Materials, 5, 909

Sorted by citations

Items 601–700 of 959

Investigation of the Effect of Internal Pores Distribution on the Elastic Properties of Closed-Cell Aluminum Foam: A Comparison with Cancellous Bone
Mirzaali, M. J., Libonati, F., Vena, P., Mussi, V., Vergani, L. M., & Strano, M. (2016) · Procedia Structural Integrity · doi:10.1016/j.prostr.2016.06.164 · Cited by 10
Topologieoptimierung – Entwicklungswerkzeug für die additive Fertigung
Walzl, A., & Buchmayr, B. (2017) · BHM Berg- und Hüttenmännische Monatshefte · doi:10.1007/s00501-017-0582-y · Cited by 10
Nanostructured 2D cellular materials in silicon by sidewall transfer lithography NEMS
Syms, R. R. A., Liu, D., & Ahmad, M. M. (2017) · Journal of Micromechanics and Microengineering · doi:10.1088/1361-6439/aa7167 · Cited by 10
An Approach of Irregular Porous Structure Modeling Based on Subdivision and NURBS
Kou, S., & Tan, S. T. (2012) · Computer-Aided Design and Applications · doi:10.3722/cadaps.2013.355-369 · Cited by 10
Lightweight, compression-resistant cellular structures inspired from the infructescence of Liquidambar formosana
Tung, C., Wang, H.-J., & Chen, P. (2020) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2020.103961 · Cited by 10
Lightweight cellulosic insulation panels made from oil palm trunk fibers
Zaini, L. H., Solt-Rindler, A., Hansmann, C., Veigel, S., & Gindl‐Altmutter, W. (2024) · Industrial Crops and Products · doi:10.1016/j.indcrop.2024.119497 · Cited by 9
MXene‐Vitrimer Nanocomposites: Photo‐Thermal Repair, Reinforcement, and Conductivity at Low Volume Fractions Through a Percolative Voronoi‐Inspired Microstructure
Carey, M. S., Taussig, L., Nantz, J. M., Lipp, J., Mirau, P. A., Barsoum, M. W., Nepal, D., & Magenau, A. J. D. (2024) · Advanced Materials · doi:10.1002/adma.202412000 · Cited by 9
Smart Design Aided by Mathematical Approaches: Adaptive Manufacturing, Sustainability, and Biomimetic Materials
Kantaros, A., Ganetsos, T. K., Pallis, E., & Papoutsidakis, M. G. (2025) · Designs · doi:10.3390/designs9050102 · Cited by 9
Studying trabecular bone samples demonstrates a power law relation between deteriorated structure and mechanical properties - a study combining 3D printing with the finite element method
Huang, X., Zheng, L., Zheng, D., Li, S., Fan, Y., Lin, Z., & Huang, S. (2023) · Frontiers in Endocrinology · doi:10.3389/fendo.2023.1061758 · Cited by 9
Additively Manufactured Foot Insoles Using Body-Centered Cubic (BCC) and Triply Periodic Minimal Surface (TPMS) Cellular Structures
Rico-Baeza, G., Perez-Soto, G. I., Morales-Hernandez, L. A., Cuan‐Urquizo, E., & Camarillo-Gómez, K. A. (2023) · Applied Sciences · doi:10.3390/app132312665 · Cited by 9
Fabrication of 3D printed trabecular bone-templated scaffolds modified with rare earth europium (III)-based complex for enhancing mitochondrial function in bone regeneration
Huang, X., Zheng, L., Li, P., Lin, Z., Huang, S., & Zhou, C. (2024) · Applied Materials Today · doi:10.1016/j.apmt.2024.102130 · Cited by 9
Description of the Cirad wood collection in Montpellier, France, representing eight thousand identified species
Langbour, P., Paradis, S., & Thibaut, B. (2019) · BOIS & FORETS DES TROPIQUES · doi:10.19182/bft2019.339.a31709 · Cited by 9
Time-dependent behaviour of demineralised trabecular bone – Experimental investigation and development of a constitutive model
Xie, S., Wallace, R. J., & Pankaj, P. (2020) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2020.103751 · Cited by 9
Theoretical study on the dynamic compression and energy absorption of porous materials filled with magneto-rheological fluid
Zhang, X. W., Zhang, Q., & Ren, X. J. (2021) · International Journal of Impact Engineering · doi:10.1016/j.ijimpeng.2021.104105 · Cited by 9
Bioactive materials in orthopaedics
Zhao, X. (2011) · Elsevier eBooks · doi:10.1533/9780857092939.2.124 · Cited by 9
Transverse fracture properties of green wood and the anatomy of six temperate tree species
Keleş, S. Ö., Ennos, A. R., & Cattaneo, M. (2016) · Forestry An International Journal of Forest Research · doi:10.1093/forestry/cpw023 · Cited by 9
Laminated porous diatomite monoliths for adsorption of dyes from water
Nikjoo, D., Perrot, V., & Akhtar, F. (2018) · Environmental Progress & Sustainable Energy · doi:10.1002/ep.13064 · Cited by 9
Design of Lattice Structures Using Local Relative Density Mapping Method
Song, G., Jing, S., Zhao, F.-L., Wang, Y., Xing, H., & Qie, L. (2018) · Chinese Journal of Mechanical Engineering · doi:10.1186/s10033-018-0289-3 · Cited by 9
Effects of Shear Deformation of Struts in Hexagonal Lattices on their Effective In-Plane Material Properties
Suttakul, P., Fongsamootr, T., Vo, D., & Nanakorn, P. (2021) · Materials science forum · doi:10.4028/www.scientific.net/msf.1034.193 · Cited by 9
Design and additive manufacturing of metamaterials for orthopedic implants and its mechanical characterization
Suryawanshi, C. M., Ravi, B., & Mishra, S. K. (2025) · Mechanics of Advanced Materials and Structures · doi:10.1080/15376494.2025.2471033 · Cited by 8
Mechanical anisotropy match of parameterized body-centered-cuboid scaffolds and trabecular bones
Chen, H., Xu, X., Pugno, N. M., Li, Z., & Chen, Q. (2025) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2025.110423 · Cited by 8
LPBF-Produced Elastomeric Lattice Structures for Personal Protection Equipment: Mechanical Performance Versus Comfort-Related Attributes
Trottier, W. T., Collin, A., Krick, T., & Braïlovski, V. (2025) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp9060182 · Cited by 9
Biomimetic aerogels with hierarchical honeycomb architecture for superior CO2 adsorption, selectivity, and structural integrity
Pal, S., Roberts, E. P. L., Trifkovic, M., & Natale, G. (2025) · Communications Materials · doi:10.1038/s43246-025-00861-9 · Cited by 8
High strain rate testing and modeling of 3D-printed polymeric cellular structures
Bandinelli, F., Scapin, M., & Peroni, L. (2025) · Thin-Walled Structures · doi:10.1016/j.tws.2025.114081 · Cited by 8
Bioinspired Cellular Single-Walled Carbon Nanotube Aerogels with Temperature-Invariant Elasticity and Fatigue Resistance for Potential Energy Dissipation
Li, D., Feng, L., Han, F., Hao, S., Wu, Q., Gao, Y. L., Li, Y., Qin, X., & He, M. (2023) · ACS Applied Nano Materials · doi:10.1021/acsanm.2c05243 · Cited by 8
Instabilities induced by mechanical loading determine the viability of chondrocytes grown on porous scaffolds
Kim, B., Bouklas, N., Cohen, I., & Bonassar, L. J. (2023) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2023.111591 · Cited by 8
Experimental and numerical study of the compressive fatigue behavior of a Ti6Al4V mapped rhombioidal dodecahedral structure fabricated by electron beam melting
Yu, B., Li, Y., Abbès, B., Li, S., & Yu, B.-Y. (2023) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2023.107912 · Cited by 8
Characterisation of a metallic foam–cement composite under selected loading conditions
Tozzi, G., Zhang, Q.-H., Lupton, C., Tong, J., Guillén-Girón, T., Ohrndorf, A., & Christ, H. (2013) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-013-5000-8 · Cited by 8
Mechanical Property Analysis of Triply Periodic Minimal Surface Inspired Porous Scaffold for Bone Applications: A Compromise between Desired Mechanical Strength and Additive Manufacturability
Kumar, J., Verma, R., Singh, N. K., Singh, N. K., Nirala, N. S., & Kumar, S. (2022) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-022-07322-1 · Cited by 8
Elastic axial stiffness properties of lattice structures: Analytical approach and experimental validation for bcc and f 2 cc,z unit cells
Bühring, J., Soika, J., Schirp, M. A., & Schröder, K. (2022) · Mechanics of Advanced Materials and Structures · doi:10.1080/15376494.2022.2139027 · Cited by 9
Strong similarities in the creep and damage behaviour of a synthetic bone model compared to human trabecular bone under compressive cyclic loading
Purcell, P., Tiernan, S., McEvoy, F., & Morris, S. F. (2015) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2015.03.014 · Cited by 8
Compressive Fatigue Behavior of Bovine Cancellous Bone and Bone Analogous Materials under Multi‐Step Loading Conditions
Guillén-Girón, T., Ohrndorf, A., Tozzi, G., Tong, J., & Christ, H. (2011) · Advanced Engineering Materials · doi:10.1002/adem.201180060 · Cited by 8
Topology optimization of periodic cellular solids based on a superelement method
Qiu, K., Zhang, W., Domaszewski, M., & Chamoret, D. (2009) · Engineering Optimization · doi:10.1080/03052150802414718 · Cited by 8
Architectured Structural Materials: A Parallel Between Nature and Engineering
Dunlop, J., & Brechet, Y. J. M. (2009) · MRS Proceedings · doi:10.1557/proc-1188-ll09-04 · Cited by 9
A design, mechanical rating, and load adaptation method for cellular components for additive manufacturing
Ziegler, T., Jaeger, R., & Koplin, C. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9615-z · Cited by 8
Glass transition broadening via nanofiller‐contiguous polymer network in aromatic thermosetting copolyester nanocomposites
Bakır, M., Meyer, J. L., Sutrisno, A., Economy, J., & Jasiuk, I. (2018) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.24747 · Cited by 8
Enhanced tunable fracture properties of the high stiffness hierarchical honeycombs with stochastic Voronoi substructures
Wang, B., Ding, Q., Sun, Y., Yu, S., Ren, F., Cao, X., & Du, Y. (2018) · Results in Physics · doi:10.1016/j.rinp.2018.12.068 · Cited by 8
Biomimetic Materials
Vincent, J. F. V. (2013) · Elsevier eBooks · doi:10.1016/b978-0-08-099359-1.00017-5 · Cited by 8
Estrategias mecánicas de las plantas arborescentes: enseñanzas estructurales de los árboles
Vargas, G. (2017) · Ingeniare. Revista chilena de ingeniería · doi:10.4067/s0718-33052017000300510 · Cited by 8
Preliminary investigation of the large-scale sandwich decks with graded 3D printed auxetic core
Stepinac, L., & Galić, J. (2024) · Journal of Sandwich Structures & Materials · doi:10.1177/10996362241298144 · Cited by 7
Bioinspired Materials, Designs, and Manufacturing Strategies for Advanced Impact‐Resistant Helmets
Schlager, J., Jin, Y., Fauk, M., Alberts, J. L., & Cao, C. C. (2025) · Advanced Engineering Materials · doi:10.1002/adem.202501453 · Cited by 7
In-vivo and ex-vivo evaluation of bio-inspired structures fabricated via PBF-LB for biomedical applications
Araya, M., Jarvenpää, A., Rautio, T., Bolaños, R. V., Estrada, R., de Ruijter, M., & Guillén-Girón, T. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.101450 · Cited by 7
Mullins effect behaviour under compression in micelle-templated silica and micelle-templated silica/agarose systems
Puértolas, J. A., Vadillo, J. L., Sánchez‐Salcedo, S., Nieto, A., Gómez‐Barrena, E., & Vallet‐Regí, M. (2011) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-011-4482-5 · Cited by 7
Sustainability Based on Biomimetic Design Models
Almeida, H. A., & Oliveira, E. (2016) · Environmental footprints and eco-design of products and processes · doi:10.1007/978-981-10-0606-7_3 · Cited by 6
Simple preparation of 58S bioactive glass/polycaprolactone composite scaffolds by freeze-drying under ambient conditions
dos Santos, D. M. M., Martins, T., Carvalho, S. M., Pereira, M. M., Houmard, M., & Nunes, E. H. M. (2019) · Materials Letters · doi:10.1016/j.matlet.2019.126647 · Cited by 7
Comparison of foam models from regular and irregular arrays of Gibson-Ashby open-cells
Kornievsky, A., & Nasedkin, A. V. (2021) · PNRPU Mechanics Bulletin · doi:10.15593/perm.mech/2021.3.07 · Cited by 7
The effect of partial delignification on the stress–strain relationship in transverse compression
Jakob, M., & Gindl‐Altmutter, W. (2023) · Journal of Materials Science · doi:10.1007/s10853-022-08074-y · Cited by 7
Cellular Structure Design and Manufacturability for Electric Vehicle: A Review
Komara, A. I., Budiwantoro, B., & Setiawan, R. (2022) · International Journal of Sustainable Transportation Technology · doi:10.31427/ijstt.2022.5.2.5 · Cited by 7
Staged-Injection Procedure to Prevent Cement Leakage During Vertebroplasty
Wu, Z., Lei, W., Hu, Y., Wang, H., Wan, S.-Y., Wang, J., & Han, Y. (2007) · Spine · doi:10.1097/brs.0b013e3181573976 · Cited by 7
Investigation of shape memory alloy honeycombs by means of a micromechanical analysis
Freed, Y., Aboudi, J., & Gilat, R. (2008) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/16/5/055002 · Cited by 7
Crack propagation in quasi-brittle two-dimensional isotropic lattices
Maimí, P., Turón, A., & Trias, D. (2010) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2010.09.014 · Cited by 7
Inhomogeneity of tissue-level strain distributions in individual trabeculae: Mathematical model studies of normal and osteoporosis cases
Gefen, A., Portnoy, S., & Diamant, I. (2007) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2007.07.001 · Cited by 7
Production and Precipitation Hardening of Beta-Type Ti-35Nb-10Cu Alloy Foam for Implant Applications
Mutlu, İ., Yeni̇yol, S., & Oktay, E. (2016) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-016-1982-y · Cited by 6
Synthesis of nanoporous organic/inorganic hybrid materials with adjustable pore size
Qawasmi, Y., Atanasova, P. P., Jahnke, T., Burghard, Ž., Müller, A., Grassberger, L., Strey, R., Bill, J., & Sottmann, T. (2018) · Colloid & Polymer Science · doi:10.1007/s00396-018-4402-z · Cited by 7
Microstructural design of ceramics for bone regeneration
del Valle, A., Hautcoeur, D., Leriche, A., Cambier, F., & Baudı́n, C. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2019.10.039 · Cited by 7
Methacrylate‐Based Polymer Foams with Controllable Pore Sizes and Controllable Polydispersities via Foamed Emulsion Templating
Dabrowski, M. L., & Stubenrauch, C. (2020) · Advanced Engineering Materials · doi:10.1002/adem.202001013 · Cited by 7
Porcupine Quill: Buckling Resistance Analysis and Design for 3D Printing
Tee, Y. L., Leary, M., & Tran, P. (2020) · Lecture notes in civil engineering · doi:10.1007/978-981-15-8079-6_123 · Cited by 7
Foams in Wood Composites
Shalbafan, A. (2022) · Gels horizons: from science to smart materials · doi:10.1007/978-981-16-5237-0_16 · Cited by 7
Experimental quantification of bone mechanics
Bhattacharya, P., & van Lenthe, H. (2014) · Elsevier eBooks · doi:10.1533/9780857099037.1.30 · Cited by 7
Tensile and Shear Stress Evaluation of Schwartz Surfaces for Scaffold Design
Almeida, H. A., & Bártolo, P. (2015) · Procedia Engineering · doi:10.1016/j.proeng.2015.07.025 · Cited by 7
Effects of heat treatment of wood on hydroxylapatite type mineral precipitation and biomechanical properties in vitro
Rekola, J., Lassila, L. V. J., Hirvonen, J., Lahdenperä, M., Grenman, R. A., Aho, A. J., & VALLITTU, P. K. (2010) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-010-4087-4 · Cited by 7
Effect of water absorption on the flexural strength of a green sandwich composite
Prabhakaran, S., Krishnaraj, V., Senthilkumar, M., Zitoune, R., & Shankar, K. (2019) · Materials Testing · doi:10.3139/120.111330 · Cited by 7
Behaviour of cellular materials under impact loading
Vesenjak, M., Ren, Z., & Öchsner, A. Ö. (2008) · Materialwissenschaft und Werkstofftechnik · doi:10.1002/mawe.200700258 · Cited by 7
Structural and mechanical characterization of the hoof in Mongolian equids
Chen, N., Yang, X. H., Xu, S., & Song, J. (2024) · Micron · doi:10.1016/j.micron.2024.103609 · Cited by 6
Mechanical response of 3D printed irregular sutural tessellations with Voronoi tile patterns under tension
Dong, S., Nash, R. J., & Li, Y. (2024) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2024.110262 · Cited by 6
Espumas vítreas do sistema Li2O-ZrO2-SiO2-Al2O 3 produzidas pelo processo gelcasting
Trichês, E. D. S., Rambo, C. R., Ortega, F. D. S., de Oliveira, A. P. N., & Pandolfelli, V. C. (2009) · Cerâmica · doi:10.1590/s0366-69132009000200007 · Cited by 6
PHYSICAL AND SOFTWARE MODELLING FOR CHALLENGING SOIL STRUCTURE INTERACTION
Ganasan, R., Siang, A. J. L. M., & Wijeyesekera, D. C. (2015) · Malaysian Technical Universities Conference on Engineering and Technology 2015 · Cited by 6
Micromechanical approach for the behaviour of open cell foams
Maalej, Y., Ghezal, M. I. E., & Doghri, I. (2013) · European Journal of Computational Mechanics · doi:10.1080/17797179.2013.820979 · Cited by 6
Indentation-triggered pattern transformation in hyperelastic soft cellular solids
Chen, K., Cao, Y., Zhang, M.-G., & Feng, X. (2014) · Comptes Rendus Mécanique · doi:10.1016/j.crme.2014.01.011 · Cited by 6
Morphological models of trabecular bone suitable for high-porosity regions and vertebrae
Rammohan, A. V., & Tan, V. B. C. (2016) · Computer Methods in Biomechanics & Biomedical Engineering · doi:10.1080/10255842.2016.1146945 · Cited by 6
Effects of lateral opening wedge and medial closing wedge distal femoral osteotomies on axial load stability
Ogawa, H., Matsumoto, K., & Akiyama, H. (2020) · The Knee · doi:10.1016/j.knee.2020.04.019 · Cited by 6
Evaluation of energy absorbing property of additively manufactured porous Al-10Si-0.3Mg alloys with an acorn shape at the landing of the smart lander on the inclined plane or the plane with a boulder
Fujimori, Y., Guo, S., & Kitazono, K. (2020) · Journal of Japan Institute of Light Metals · doi:10.2464/jilm.70.333 · Cited by 6
Mineral plastic foams
Menold, P., Cölfen, H., & Stubenrauch, C. (2021) · Materials Horizons · doi:10.1039/d1mh00122a · Cited by 6
Preparation, characterization and evaluation of a novel CMC/Chitosan-α-Fe2O3 nanoparticles-coated 17–4 PH stainless-steel foam
Karakuş, S., Albayrak, İ., Üllen, N. B., İnsel, M. A., & Kilislioğlu, A. (2021) · Polymer Bulletin · doi:10.1007/s00289-021-03700-2 · Cited by 6
Idealization through interactive modeling and experimental assessment of 3D-printed gyroid for trabecular bone scaffold
Tripathi, Y. M., Shukla, M., & Bhatt, A. D. (2021) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1177/09544119211022988 · Cited by 6
Does mechanical stimulation really protect the architecture of trabecular bone? A simulation study
Maurer, M. M., Weinkamer, R., Müller, R., & Ruffoni, D. (2014) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-014-0637-x · Cited by 6
Mechanical Properties of Natural Cellular Materials
Tchepel, D., Fernandes, F. A. O., Anjos, O., & de Sousa, R. A. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.04056-x · Cited by 6
Calcium phosphate ceramics with continuously gradient macrochannels using three-dimensional extrusion of bilayered ceramic-camphene mixture/pure camphene feedrod
Ahn, M.-K., Moon, Y.-W., Maeng, W., Koh, Y., & Kim, H. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.07.013 · Cited by 6
Seismic Aspects of the Application of Thermal Insulation Boards Beneath the Foundations of Buildings
Koren, D., Kilar, V., & Azinović, B. (2016) · InTech eBooks · doi:10.5772/62294 · Cited by 6
Effects of Morphological and Anatomical Characteristics of Banana Crown Vascular Bundles on Cutting Mechanical Properties Using Multiple Imaging Methods
Zhao, L., Yang, H., Xie, H., Duan, J., Jin, M., Fu, H., Guo, J., Xu, Z., Jiang, T., & Yang, Z. (2020) · Agronomy · doi:10.3390/agronomy10081199 · Cited by 6
Design of High Strength and Lightweight Construction Composites Using Advanced Porous and Tough Cementitious Materials
Guo, H., Liu, Q., Xu, J., & Sun, G. (2021) · Journal of Advanced Concrete Technology · doi:10.3151/jact.19.240 · Cited by 6
Prediction of the effective elastic moduli of porous bone scaffolds: Analytical and computational studies
Imani, S. M., Goudarzi, A. M., Rabiee, S. M., & Dardel, M. (2021) · International Journal of Modern Physics C · doi:10.1142/s0129183122500280 · Cited by 6
A honeycomb-like hydrogel in-situ constructed by Streptococcus zooepidemicus and TOCN for the proliferation of bacteria
Tang, X., Liu, L., Wang, Z., Fan, Y., Zhang, J., Yong, Q., & Li, X. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119099 · Cited by 6
Analysis of the compressive behaviour of the three-dimensional printed porous titanium for dental implants using a modified cellular solid model
Gagg, G., Ghassemieh, E., & Wiria, F. E. (2013) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1177/0954411913489802 · Cited by 6
Mitigating Settlement of Structures founded on Peat
Wijeyesekera, D. C., Numbikannu, L., Ismail, T. N. H. T., & Bakar, I. (2016) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/136/1/012042 · Cited by 6
Bone Biomechanics
Shore, S. W., Unnikrishnan, G. U., Hussein, A. I., & Morgan, E. F. (2012) · CRC Press eBooks · doi:10.1201/b13733-3 · Cited by 6
Tailoring Mechanical Behavior of PVA-Bioactive Glass Hybrid Foams
Costa, H. S., de Oliveira, A. A. R., Oréfice, R. L., Mansur, H. S., & Pereira, M. M. (2007) · Key engineering materials · doi:10.4028/www.scientific.net/kem.361-363.289 · Cited by 6
Ultrastructural characterization of the epithelium that constitutes the cardiac gland epithelial ‘honeycomb’ in the stomach of the babirusa (Babyrousa babyrussa)
Macdonald, A. A., Mitchell, S., Signorella, A., & Leus, K. (2007) · Comptes Rendus Biologies · doi:10.1016/j.crvi.2007.10.007 · Cited by 6
The Porous Structure and Mechanical Properties of Injection Molded HA/PA66 Scaffolds
Zhou, S., Li, Y., Wang, Y., Zuo, Y., Gao, S.-B., Li, M., & Zhang, L. (2014) · International Polymer Processing · doi:10.3139/217.2851 · Cited by 6
An in silico parametric model of vertebrae trabecular bone based on density and microstructural parameters to assess risk of fracture in osteoporosis
Kashani, M. R. A., Nikkhoo, M., Khalaf, K. A., Firoozbakhsh, K. K., Arjmand, N., Razmjoo, A., & Parnianpour, M. (2014) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1177/0954411914563363 · Cited by 6
How to Surpass the Deep-Sea Glass Sponges MechanicallyPreprint
Li, Q., & Sun, B. (2021) · Preprints.org · doi:10.20944/preprints202112.0042.v1 · Cited by 6
Study of a compact energy absorber
Ali, H. M. (2007) · doi:10.31274/rtd-180813-16964 · Cited by 6
Soft porous metamaterials using inflation-induced buckling for smart actuation
Barvenik, K., Bonthron, M., Jones, A., & Tubaldi, E. (2025) · Nature Communications · doi:10.1038/s41467-025-63072-3 · Cited by 5
Three-dimensional finite element modeling of the shoe sole to investigate the impact of various geometries on foot heel stresses and energy absorption
Honarvar, S., Nourani, A., Yarandi, A., & Ghehi, F. F. (2022) · National and International Iranian Conference on Biomedical Engineering (ICBME) · doi:10.1109/icbme57741.2022.10052813 · Cited by 5
Freeze-Cast Composites of Alginate/Pyrophosphate-Stabilized Amorphous Calcium Carbonate: From the Nanoscale Structuration to the Macroscopic Properties
Merle, M., Lagarrigue, P., Wang, S., Duployer, B., Tenailleau, C., Müller, W. E. G., Poquillon, D., Combes, C., & Soulié, J. (2025) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.4c01396 · Cited by 5
Time-Dependent Collagen Fibered Structure in the Early Distraction Callus: Imaging Characterization and Mathematical Modeling
Blázquez-Carmona, P., Sanz‐Herrera, J. A., Mora‐Macías, J., Morgaz, J., Domínguez, J., & Reina-Romo, E. (2022) · Annals of Biomedical Engineering · doi:10.1007/s10439-022-02992-3 · Cited by 5
Use of Molding Mixtures for the Production of Cast Porous Metals
Kroupová, I., Bašistová, M., Lichý, P., MERTA, V., & Radkovský, F. (2022) · Metals · doi:10.3390/met12071134 · Cited by 5
Microscopic computed tomography aided finite element modelling as a methodology to estimate hygroexpansion coefficients of wood: a case study on opposite and compression wood in softwood branches
Florisson, S., Hartwig-Nair, M., Bergenstråhle‐Wohlert, M., & Gamstedt, E. K. (2023) · Holzforschung · doi:10.1515/hf-2023-0014 · Cited by 5
Review: Tailored microstructures in the system tricalcium phosphate-wollastonite-diopside for bone regeneration scaffolds
Baudı́n, C., & Peña, P. (2023) · Open Ceramics · doi:10.1016/j.oceram.2023.100483 · Cited by 5
Coniferous Trees as Bioinspiration for Designing Long Reinforced Prestressed Concrete Columns
Toader, T.-N., Mircea, C., Truta, A. M., & Constantinescu, H. (2024) · Biomimetics · doi:10.3390/biomimetics9030165 · Cited by 5

Authors: Gibson, L. J.
Affiliations: Massachusetts Institute of Technology (US)
Corresponding author: Gibson, Lorna J.
ORCID: Gibson, Lorna J.
Venue: Journal of Biomechanics
Publisher: Elsevier BV
Published: 2005-03
Volume: 38
Issue: 3
Pages: 377-399
ISSN: 0021-9290 (ISSN-L)
DOI: 10.1016/j.jbiomech.2004.09.027
OpenAlex: W2003488635
Cited by: 961
References: 82
Citations by year: 2026: 42 · 2025: 45 · 2024: 46 · 2023: 49 · 2022: 59 · 2021: 66 · 2020: 62 · 2019: 51 · 2018: 57 · 2017: 64 · 2016: 50 · 2015: 40 · 2014: 50 · 2013: 50 · 2012: 39
FWCI: 8.64
Type: journal article
Language: en
Open access: closed
Licence: www.elsevier.com/tdm/userlicense/1.0/ (tdm)
Locations: Journal of Biomechanics (publishedVersion)
PubMed (publishedVersion)
Topics: Physical Sciences › Engineering › Mechanical Engineering › Cellular and Composite Structures
Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
Physical Sciences › Engineering › Civil and Structural Engineering › Topology Optimization in Engineering
Keywords: cellular materials, wood, cork, trabecular bone, honeycomb microstructure, mechanical efficiency, sandwich structures, tubular structures, plant stems, engineered biomaterials, tissue regeneration
MeSH terms: Animals, Biocompatible Materials, Biomechanical Phenomena, Bone and Bones, Humans, Models, Biological, Tissue Engineering

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Biomechanics of cellular solids

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks