Cited by 961Cellular and Composite StructuresAdvanced Materials and MechanicsTopology Optimization in Engineering

The DOI matches its Crossref record; 82 of the 82 references it cites were found in a registry or an index.

Biomechanics of cellular solids

Gibson, Lorna J.·2005·Journal of Biomechanics

DOI 10.1016/j.jbiomech.2004.09.027

Open this paper in CoChat — free account

Abstract

Materials with a cellular structure are widespread in nature and include wood, cork, plant parenchyma and trabecular bone. Natural cellular materials are often mechanically efficient: the honeycomb-like microstructure of wood, for instance, gives it an exceptionally high performance index for resisting bending and buckling. Here we review the mechanics of a wide range of natural cellular materials and examine their role in lightweight natural sandwich structures (e.g. iris leaves) and natural tubular structures (e.g. plant stems or animal quills). We also describe two examples of engineered biomaterials with a cellular structure, designed to replace or regenerate tissue in the body.

Integrity signals

Registry

Crossref · 10.1016/j.jbiomech.2004.09.027

Cites

82 of 82 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Self-citation
Foam Structures with a Negative Poisson's Ratio
Lakes, R. S. (1987) · Science · doi:10.1126/science.235.4792.1038 · Cited by 3,917
Metal Foams: A Design Guide
Ashby, M., Evans, A. G., Fleck, N., Gibson, L. J., Hutchinson, J., Wadley, H. N. G., & Delale, F. (2001) · Applied Mechanics Reviews · doi:10.1115/1.1421119 · Cited by 2,695
Self-citation
Materials Selection in Mechanical Design
Ashby, M., & Cebon, D. (2011) · Elsevier eBooks · doi:10.1016/c2009-0-25539-5 · Cited by 2,688
The compressive behavior of bone as a two-phase porous structure
Carter, D., & Hayes, W. (1977) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-197759070-00021 · Cited by 2,001
The mechanics of three-dimensional cellular materials
Gibson, I. J., & Ashby, M. F. (1982) · Proceedings of the Royal Society of London A Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0088 · Cited by 1,895
Analysis and design of structural sandwich panels
Ogorkiewicz, R. M. (1970) · Composites · doi:10.1016/0010-4361(70)90244-2 · Cited by 1,762
Mechanics of Wood and Wood Composites
Bodig, J., & Jayne, B. A. (1982) · Medical Entomology and Zoology · Cited by 1,473
The mechanics of two-dimensional cellular materials
Gibson, L. J., Ashby, M. F., Schajer, G. S., & Robertson, C. I. (1982) · Proceedings of the Royal Society of London A Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0087 · Cited by 1,280
Self-citation
Preparation and characterization of poly(l-lactic acid) foams
Mikos, A. G., Thorsen, A. J., Czerwonka, L. A., Bao, Y., Langer, R., Winslow, D. N., & Vacanti, J. P. (1994) · Polymer · doi:10.1016/0032-3861(94)90953-9 · Cited by 1,196

Show all 82 references

Research works printed but not linked: 7

Bensusan, J.S., Davy, D.T., Heiple, K.G., Verdin, P.J., 1983. 19th Annual Orthopaedic Research Society Meeting 8, pp. 132.
Goodman, 1971, Orthotropic strength of wood in compression, Wood Science, 4, 83
Goree, 1962, Elastic stability of circular cylindrical shells stabilized by a soft elastic core, Experimental Mechanics, 2, 142
Guo, X.E., Kim, C.H., 1999. Effects of age-related bone loss: A 3D microstructural simulation. Proceedings of the 1999 Bioengineering Conference American Society of Mechanical Engineers Bioengineering Division, vol 42. pp. 327–328.
Lhommeau, 1998, Preparation of highly interconnected porous tyrosine-derived polycarbonate scaffolds, Tissue Engineering, 4, 468
Maddox, R.D., Carroll, J.W., Hollister, S.J., Mazumdar, J., Krebsbach, P.H., 2003. Gene/cell delivery from designed titanium scaffolds made by free-form fabrication. Society for Biomaterials 29th Annual Meeting Transactions. Reno, Nevada.
Patel, 1970, Structural features and mechanical properties of rigid cellular plastics, Journal of Materials, 5, 909

Sorted by citations

Nature’s hierarchical materials
Fratzl, P., & Weinkamer, R. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.06.001 · Cited by 2,788
Self-healing polymeric materials: A review of recent developments
Wu, D. Y., Meure, S., & Solomon, D. H. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.02.001 · Cited by 1,407
Bioactive Glass and Glass-Ceramic Scaffolds for Bone Tissue Engineering
Gerhardt, L. ‐., & Boccaccini, A. R. (2010) · Materials · doi:10.3390/ma3073867 · Cited by 1,182
Bone Mechanical Properties in Healthy and Diseased States
Morgan, E. F., Unnikrisnan, G. U., & Hussein, A. I. (2018) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-062117-121139 · Cited by 1,026
“Using this approach, investigators attributed the experimentally observed dependence of Young’s modulus and compressive strength on apparent density raised to the second power to bendingdominated linear elastic behavior and failure by buckling (127).”
Functional gradients and heterogeneities in biological materials: Design principles, functions, and bioinspired applications
Liu, Z., Meyers, M. A., Zhang, Z., & Ritchie, R. O. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.013 · Cited by 899
Bioinspired engineering of honeycomb structure – Using nature to inspire human innovation
Zhang, Q., Yang, X., Li, P., Huang, G., Feng, S., Shen, C., Han, B., Zhang, X., Jin, F., Xu, F., et al. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.05.001 · Cited by 838
Biological materials: Functional adaptations and bioinspired designs
Chen, P.-Y., McKittrick, J., & Meyers, M. A. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2012.03.001 · Cited by 766
Structural Design Elements in Biological Materials: Application to Bioinspiration
Naleway, S. E., Porter, M. M., McKittrick, J. M., & Meyers, M. A. (2015) · Advanced Materials · doi:10.1002/adma.201502403 · Cited by 727
Cork: properties, capabilities and applications
Silva, S. P., Sabino, M. A., Fernandes, E. M., Correlo, V. M., Boesel, L. F., & Reis, R. L. (2005) · International Materials Reviews · doi:10.1179/174328005x41168 · Cited by 655
The crustacean exoskeleton as an example of a structurally and mechanically graded biological nanocomposite material
Raabe, D., Sachs, C., & Romano, P. (2005) · Acta Materialia · doi:10.1016/j.actamat.2005.05.027 · Cited by 608
Biomaterials of PVA and PVP in medical and pharmaceutical applications: Perspectives and challenges
Teodorescu, M., Bercea, M., & Morariu, S. (2018) · Biotechnology Advances · doi:10.1016/j.biotechadv.2018.11.008 · Cited by 555
Three-dimensionally bonded spongy graphene material with super compressive elasticity and near-zero Poisson’s ratio
Wu, Y., Yi, N., Huang, L., Zhang, T., Fang, S., Chang, H., Li, N., Oh, J., Lee, J. A., Kozlov, M. E., et al. (2015) · Nature Communications · doi:10.1038/ncomms7141 · Cited by 548
Nanomaterials and bone regeneration
Gong, T., Xie, J., Liao, J., Zhang, T., Lin, S., & Lin, Y. (2015) · Bone Research · doi:10.1038/boneres.2015.29 · Cited by 538
Mechanical properties of 3D printed polymeric Gyroid cellular structures: Experimental and finite element study
Abueidda, D., Elhebeary, M., Shiang, C.-S., Pang, S., Al‐Rub, R. K. A., & Jasiuk, I. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107597 · Cited by 530
Design and properties of 3D scaffolds for bone tissue engineering
Gómez, S., Vlad, M. D., López, J. L., & Fernández, E. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.06.032 · Cited by 480
Synthesis, properties and biomedical applications of poly(glycerol sebacate) (PGS): A review
Rai, R., Tallawi, M., Grigore, A., & Boccaccini, A. R. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.02.001 · Cited by 477
Structural and material approaches to bone tissue engineering in powder-based three-dimensional printing
Butscher, A., Bohner, M., Hofmann, S., Gauckler, L. J., & Müller, R. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.039 · Cited by 457
Mechanical properties of 3D printed polymeric cellular materials with triply periodic minimal surface architectures
Abueidda, D., Bakır, M., Al‐Rub, R. K. A., Bergström, J., Sobh, N., & Jasiuk, I. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.03.018 · Cited by 460
Mechanical metamaterials: a state of the art
Barchiesi, E., Spagnuolo, M., & Placidi, L. (2018) · Mathematics and Mechanics of Solids · doi:10.1177/1081286517735695 · Cited by 437
Towards High‐Performance Bioinspired Composites
Studart, A. R. (2012) · Advanced Materials · doi:10.1002/adma.201201471 · Cited by 432
Vibration control based metamaterials and origami structures: A state-of-the-art review
Ji, J., Luo, Q., & Ye, K. (2021) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.107945 · Cited by 388
Biomaterials by freeze casting
Wegst, U. G. K., Schecter, M., Donius, A. E., & Hunger, P. M. (2010) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2010.0014 · Cited by 376
Geometry as a Factor for Tissue Growth: Towards Shape Optimization of Tissue Engineering Scaffolds
Bidan, C. M., Kommareddy, K. P., Rumpler, M., Kollmannsberger, P., Fratzl, P., & Dunlop, J. (2012) · Advanced Healthcare Materials · doi:10.1002/adhm.201200159 · Cited by 341
A Survey of Modeling of Lattice Structures Fabricated by Additive Manufacturing
Dong, G., Tang, Y., & Zhao, Y. F. (2017) · Journal of Mechanical Design · doi:10.1115/1.4037305 · Cited by 340
Evaluation of compressive properties of SLM-fabricated multi-layer lattice structures by experimental test and μ-CT-based finite element analysis
Lei, H., Li, C., Meng, J., Zhou, H. R., Liu, Y., Zhang, X., Wang, P., & Fang, D. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107685 · Cited by 346
Nanostructured scaffolds for bone tissue engineering
Li, X., Wang, L., Fan, Y., Feng, Q., Cui, F., & Watari, F. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34539 · Cited by 320
Mesoscale assembly of chemically modified graphene into complex cellular networks
Barg, S., Perez, F. M., Ni, N., do Vale Pereira, P., Maher, R. C., Garcia-Tuñon, E., Eslava, S., Agnoli, S., Mattevi, C., & Saiz, E. (2014) · Nature Communications · doi:10.1038/ncomms5328 · Cited by 285
Graphene Aerogel/Epoxy Composites with Exceptional Anisotropic Structure and Properties
Wang, Z., Shen, X., Garakani, M. A., Lin, X., Wu, Y., Liu, X., Sun, X., & Kim, J. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00146 · Cited by 272
25th Anniversary Article: Scalable Multiscale Patterned Structures Inspired by Nature: the Role of Hierarchy
Bae, W., Kim, H. N., Kim, D., Park, S., Jeong, H. E., & Suh, K. Y. (2013) · Advanced Materials · doi:10.1002/adma.201303412 · Cited by 270
Recent advances and future perspectives of sol–gel derived porous bioactive glasses: a review
Deshmukh, K., Kovářík, T., Křenek, T., Docheva, D., Stich, T., & Pola, J. (2020) · RSC Advances · doi:10.1039/d0ra04287k · Cited by 268
Vertically Aligned High-Quality Graphene Foams for Anisotropically Conductive Polymer Composites with Ultrahigh Through-Plane Thermal Conductivities
An, F., Li, X., Min, P., Liu, P., Jiang, Z., & Yu, Z. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b04230 · Cited by 251
Microarchitected Stretching‐Dominated Mechanical Metamaterials with Minimal Surface Topologies
Al‐Ketan, O., Rezgui, R., Rowshan, R., Du, H., Fang, N. X., & Al‐Rub, R. K. A. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201800029 · Cited by 251
Additive Manufacturing as a Method to Design and Optimize Bioinspired Structures
Velasco‐Hogan, A., Xu, J., & Meyers, M. A. (2018) · Advanced Materials · doi:10.1002/adma.201800940 · Cited by 251
A novel open-porous magnesium scaffold with controllable microstructures and properties for bone regeneration
Cheng, M., Wahafu, T., Jiang, G., Liu, W. X., Qiao, Y., Peng, X., Cheng, T., Zhang, X., He, G., & Liu, X. (2016) · Scientific Reports · doi:10.1038/srep24134 · Cited by 247
Bone Volume Fraction Explains the Variation in Strength and Stiffness of Cancellous Bone Affected by Metastatic Cancer and Osteoporosis
Nazarian, A., Stechow, D. V., Zurakowski, D., Müller, R., & Snyder, B. D. (2008) · Calcified Tissue International · doi:10.1007/s00223-008-9174-x · Cited by 251
Field responsive mechanical metamaterials
Jackson, J. A., Messner, M. C., Dudukovic, N. A., Smith, W. L., Bekker, L., Moran, B. D., Golobic, A. M., Pascall, A. J., Duoss, E. B., Loh, K. J., et al. (2018) · Science Advances · doi:10.1126/sciadv.aau6419 · Cited by 244
On hierarchical honeycombs under out-of-plane crushing
Fang, J., Sun, G., Qiu, N., Pang, T., Li, S., & Li, Q. (2017) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2017.08.013 · Cited by 231
The nanocomposite nature of bone drives its strength and damage resistance
Tertuliano, O. A., & Greer, J. R. (2016) · Nature Materials · doi:10.1038/nmat4719 · Cited by 227
Stiffness and strength tailoring of cobalt chromium graded cellular structures for stress-shielding reduction
Limmahakhun, S., Oloyede, A., Sitthiseripratip, K., Xiao, Y., & Yan, C. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.11.090 · Cited by 229
Dynamic behaviors of bio-inspired structures: Design, mechanisms, and models
Zhang, W., Xu, J., & Yu, T. (2022) · Engineering Structures · doi:10.1016/j.engstruct.2022.114490 · Cited by 224
Auxetic materials — A review
Carneiro, V. H., de Meireles, J. F. B., & Puga, H. (2013) · Materials Science-Poland · doi:10.2478/s13536-013-0140-6 · Cited by 223
Advanced Material Strategies for Tissue Engineering Scaffolds
Freed, L. E., Engelmayr, G. C., Borenstein, J. T., Moutos, F. T., & Guilak, F. (2009) · Advanced Materials · doi:10.1002/adma.200900303 · Cited by 209
Nanostructured poly(vinyl alcohol)/bioactive glass and poly(vinyl alcohol)/chitosan/bioactive glass hybrid scaffolds for biomedical applications
Mansur, H. S., & Costa, H. S. (2007) · Chemical Engineering Journal · doi:10.1016/j.cej.2007.09.036 · Cited by 211
Structure and Properties of Chicken Feather Barbs as Natural Protein Fibers
Reddy, N., & Yang, Y. (2007) · Journal of Polymers and the Environment · doi:10.1007/s10924-007-0054-7 · Cited by 203
Pore functionally graded Ti6Al4V scaffolds for bone tissue engineering application
Wang, S., Liu, L., Li, K., Zhu, L., Chen, J., & Hao, Y. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107643 · Cited by 200
Bidirectional Evolutionary Structural Optimization (BESO) based design method for lattice structure to be fabricated by additive manufacturing
Tang, Y., Kurtz, A., & Zhao, Y. F. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.06.001 · Cited by 205
Compressive properties of commercially available polyurethane foams as mechanical models for osteoporotic human cancellous bone
Patel, P., Shepherd, D. E. T., & Hukins, D. W. L. (2008) · BMC Musculoskeletal Disorders · doi:10.1186/1471-2474-9-137 · Cited by 197
Bio-mimetic mechanisms of natural hierarchical materials: A review
Chen, Q., & Pugno, N. M. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.10.012 · Cited by 197
Aligned porous alumina ceramics with high compressive strengths for bone tissue engineering
Yoon, B., Choi, W.-Y., Kim, H., Kim, J., & Koh, Y. (2007) · Scripta Materialia · doi:10.1016/j.scriptamat.2007.11.006 · Cited by 194
Structurally Controlled Cellular Architectures for High‐Performance Ultra‐Lightweight Materials
Yeo, S. J., Oh, M. J., & Yoo, P. J. (2018) · Advanced Materials · doi:10.1002/adma.201803670 · Cited by 194
A survey of the design methods for additive manufacturing to improve functional performance
Tang, Y., & Zhao, Y. F. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2015-0011 · Cited by 205
Some basic relationships between density values in cancellous and cortical bone
Zioupos, P., Cook, R. B., & Hutchinson, J. R. (2008) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2008.03.025 · Cited by 189
Construction of micropolar continua from the asymptotic homogenization of beam lattices
Reis, F. D., & Ganghoffer, J. (2012) · Computers & Structures · doi:10.1016/j.compstruc.2012.08.006 · Cited by 186
The strength of plants: theory and experimental methods to measure the mechanical properties of stems
Shah, D. U., Reynolds, T., & Ramage, M. H. (2017) · Journal of Experimental Botany · doi:10.1093/jxb/erx245 · Cited by 185
An insight from nature: honeycomb pattern in advanced structural design for impact energy absorption
Mohammadi, H., Zaini, A., Petrů, M., Mazlan, S. A., Johari, M. A. F., Hatami, H., & Koloor, S. S. R. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.12.063 · Cited by 182
Multi-axial mechanical properties of human trabecular bone
Rincón-Kohli, L., & Zysset, P. K. (2008) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-008-0128-z · Cited by 178
The Gibson-Ashby model for additively manufactured metal lattice materials: Its theoretical basis, limitations and new insights from remedies
Zhong, H., Song, T., Li, C., Das, R. K., Gu, J., & Qian, M. (2023) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2023.101081 · Cited by 185
The application of digital volume correlation (DVC) to study the microstructural behaviour of trabecular bone during compression
Gillard, F., Boardman, R., Mavrogordato, M., Hollis, D., Sinclair, I., Pierron, F., & Browne, M. (2013) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2013.09.014 · Cited by 171
Additive manufacturing of biodegradable magnesium implants and scaffolds: Review of the recent advances and research trends
Sezer, N., Evis, Z., & Koç‬, M. (2020) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2020.09.014 · Cited by 171
Titanium foams for biomedical applications: a review
Singh, R., Lee, P. D., Dashwood, R. J., & Lindley, T. C. (2010) · Materials Technology · doi:10.1179/175355510x12744412709403 · Cited by 166
Extrusion based rapid prototyping technique: An advanced platform for tissue engineering scaffold fabrication
Hoque, M. E., Chuan, Y. L., & Pashby, I. R. (2011) · Biopolymers · doi:10.1002/bip.21701 · Cited by 165
Micro-structure and mechanical properties of the turtle carapace as a biological composite shield
Achrai, B., & Wagner, H. D. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.12.023 · Cited by 164
Microstructural and mechanical properties of porous biocomposite scaffolds based on polyvinyl alcohol, nano-hydroxyapatite and cellulose nanocrystals
Kumar, A., Negi, Y. S., Choudhary, V., & Bhardwaj, N. K. (2014) · Cellulose · doi:10.1007/s10570-014-0339-7 · Cited by 166
Superior mechanical performance of highly porous, anisotropic nanocellulose–montmorillonite aerogels prepared by freeze casting
Donius, A. E., Liu, A., Berglund, L. A., & Wegst, U. G. K. (2014) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2014.05.012 · Cited by 162
Highly Aligned Porous Silicon Carbide Ceramics by Freezing Polycarbosilane/Camphene Solution
Yoon, B., Lee, E., Kim, H., & Koh, Y. (2007) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2007.01703.x · Cited by 159
The development of collagen-GAG scaffold-membrane composites for tendon tissue engineering
Caliari, S. R., Ramirez, M. A., & Harley, B. A. C. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.08.035 · Cited by 155
Fabrication of multiple-layered gradient cellular metal scaffold via electron beam melting for segmental bone reconstruction
Surmeneva, M. A., Анатольевич, С. Р., Chudinova, E., Koptioug, A., Tkachev, M. S., Gorodzha, S. N., & Rännar, L. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.07.059 · Cited by 155
3D-printed cellular structures for bone biomimetic implants
Limmahakhun, S., Oloyede, A., Sitthiseripratip, K., Xiao, Y., & Yan, C. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.03.010 · Cited by 148
Cork agglomerates as an ideal core material in lightweight structures
Castro, O., Silva, J. M., Devezas, T., Silva, A., & Gil, L. (2009) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2009.05.039 · Cited by 145
On the crashworthiness performance of novel hierarchical multi-cell tubes under axial loading
Gong, C., Bai, Z., Wang, Y., & Zhang, L. (2021) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2021.106599 · Cited by 143
Predicting bulk mechanical properties of cellularized collagen gels using multiphoton microscopy
Raub, C. B., Putnam, A. J., Tromberg, B. J., & George, S. C. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.07.004 · Cited by 141
The axial crushing performance of bio-inspired hierarchical multi-cell hexagonal tubes
Gao, Z., Zhang, H., Zhao, J. H., & Ruan, D. (2022) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2022.107880 · Cited by 141
Age-related changes in trabecular bone microstructures: global and local morphometry
Stauber, M., & Müller, R. (2005) · Osteoporosis International · doi:10.1007/s00198-005-0025-6 · Cited by 141
Failure of mineralized collagen fibrils: Modeling the role of collagen cross-linking
Siegmund, T. H., Allen, M. R., & Burr, D. B. (2008) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2008.02.017 · Cited by 141
Superlow Thermal Conductivity 3D Carbon Nanotube Network for Thermoelectric Applications
Chen, J., Gui, X., Wang, Z., Li, Z., Xiang, R., Wang, K., Wu, D., Xia, X., Zhou, Y., Wang, Q., et al. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am201330f · Cited by 141
On the crashworthiness of bio-inspired hexagonal prismatic tubes under axial compression
Wang, Z., Zhang, J., Li, Z., & Shi, C. (2020) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2020.105893 · Cited by 139
Relationship between CT intensity, micro-architecture and mechanical properties of porcine vertebral cancellous bone
Teo, J. C. M., Si-Hoe, K. M., Keh, J. E. L., & Teoh, S. H. (2005) · Clinical Biomechanics · doi:10.1016/j.clinbiomech.2005.11.001 · Cited by 138
3D printing of lightweight, super-strong yet flexible all-cellulose structure
Jiang, J., Oğuzlu, H., & Jiang, F. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126668 · Cited by 140
Dependence of mechanical compressive strength on local variations in microarchitecture in cancellous bone of proximal human femur
Perilli, E., Baleani, M., Öhman‐Mägi, C., Fognani, R., Baruffaldi, F., & Viceconti, M. (2007) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2007.08.003 · Cited by 137
Numerical simulation of the fatigue behavior of additive manufactured titanium porous lattice structures
Zargarian, A., Esfahanian, M., Kadkhodapour, J., & Ziaei‐Rad, S. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.11.054 · Cited by 136
Hydrophobic monolithic aerogels by nanocasting polystyrene on amine-modified silica
Ilhan, F., Fabrizio, E. F., McCorkle, L., Scheiman, D. A., Dass, A., Palczer, A., Meador, M. A. B., Johnston, J. C., & Leventis, N. (2006) · Journal of Materials Chemistry · doi:10.1039/b604323b · Cited by 137
3D Printing of Polycaprolactone–Polyaniline Electroactive Scaffolds for Bone Tissue Engineering
Wibowo, A., Vyas, C., Cooper, G., Qulub, F., Suratman, R., Mahyuddin, A. I., Dirgantara, T., & Bártolo, P. (2020) · Materials · doi:10.3390/ma13030512 · Cited by 133
Biomimetic cellular metals—using hierarchical structuring for energy absorption
Bührig–Polaczek, A., Fleck, C., Speck, T., Schüler, P., Fischer, S. F., Caliaro, S., & Thielen, M. (2016) · Bioinspiration & Biomimetics · doi:10.1088/1748-3190/11/4/045002 · Cited by 130
Additive manufacturing of biodegradable magnesium-based materials: Design strategies, properties, and biomedical applications
Badkoobeh, F., Mostaan, H., Rafiei, M., Bakhsheshi‐Rad, H. R., Ramakrishna, S., & Chen, D. (2023) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2022.12.001 · Cited by 133
The effect of processing variables on morphological and mechanical properties of supercritical CO2 foamed scaffolds for tissue engineering
White, L. J., Hutter, V., Tai, H., Howdle, S. M., & Shakesheff, K. M. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.07.032 · Cited by 127
Determination of metamaterial parameters by means of a homogenization approach based on asymptotic analysis
Yang, H., Abali, B. E., Timofeev, D., & Müller, W. H. (2019) · Continuum Mechanics and Thermodynamics · doi:10.1007/s00161-019-00837-4 · Cited by 127
Advanced bio-inspired structural materials: Local properties determine overall performance
Zhang, B., Han, Q., Zhang, J., Han, Z., Niu, S., & Ren, L. (2020) · Materials Today · doi:10.1016/j.mattod.2020.04.009 · Cited by 126
Generation of Large Pore Channels for Bone Tissue Engineering Using Camphene‐Based Freeze Casting
Yoon, B., Koh, Y., Park, C.-S., & Kim, H. (2007) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2007.01670.x · Cited by 126
Reinforcing Silk Scaffolds with Silk Particles
Rajkhowa, R., Gil, E. S., Kluge, J. A., Numata, K., Wang, L., Wang, X., & Kaplan, D. L. (2010) · Macromolecular Bioscience · doi:10.1002/mabi.200900358 · Cited by 124
Mechanical adaptation of biological materials — The examples of bone and wood
Weinkamer, R., & Fratzl, P. (2010) · Materials Science and Engineering C · doi:10.1016/j.msec.2010.12.002 · Cited by 121
Ingrowth of human mesenchymal stem cells into porous silk particle reinforced silk composite scaffolds: An in vitro study
Rockwood, D. N., Gil, E. S., Park, S.-H., Kluge, J. A., Grayson, W. L., Bhumiratana, S., Rajkhowa, R., Wang, X., Kim, S. J., Vunjak‐Novakovic, G., et al. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.07.020 · Cited by 119
How does bio-inspired graded honeycomb filler affect energy absorption characteristics?
Nian, Y., Wan, S., Li, X., Su, Q., & Li, M. (2019) · Thin-Walled Structures · doi:10.1016/j.tws.2019.106269 · Cited by 119
Super-elasticity of three-dimensionally cross-linked graphene materials all the way to deep cryogenic temperatures
Zhao, K., Zhang, T., Chang, H., Yang, Y., Xiao, P., Zhang, H., Li, C., Tiwary, C. S., Ajayan, P. M., & Chen, Y. (2019) · Science Advances · doi:10.1126/sciadv.aav2589 · Cited by 118
BioinspiredLLM: Conversational Large Language Model for the Mechanics of Biological and Bio‐Inspired Materials
Luu, R. K., & Buehler, M. J. (2023) · Advanced Science · doi:10.1002/advs.202306724 · Cited by 119
Mechanical testing of cancellous bone from the femoral head: Experimental errors due to off-axis measurements
Öhman‐Mägi, C., Baleani, M., Perilli, E., Dall’Ara, E., Tassani, S., Baruffaldi, F., & Viceconti, M. (2007) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2006.11.020 · Cited by 114
A theoretical evaluation of the effects of carbon nanotube entanglement and bundling on the structural and mechanical properties of buckypaper
Li, Y., & Kröger, M. (2011) · Carbon · doi:10.1016/j.carbon.2011.12.027 · Cited by 115
Biomimetic poly(glycerol sebacate)/poly(l-lactic acid) blend scaffolds for adipose tissue engineering
Frydrych, M., Román, S., MacNeil, S., & Chen, B. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.03.004 · Cited by 111
On the Materials Science of Nature's Arms Race
Liu, Z., Zhang, Z., & Ritchie, R. O. (2018) · Advanced Materials · doi:10.1002/adma.201705220 · Cited by 112
3D printing of silk microparticle reinforced polycaprolactone scaffolds for tissue engineering applications.
Vyas, C., Zhang, J., Øvrebø, Ø., Huang, B., Roberts, I., Setty, M., Allardyce, B., Haugen, H., Rajkhowa, R., & Bartolo, P. (2021) · Materials Science and Engineering: C · doi:10.1016/j.msec.2020.111433 · Cited by 111
In-plane elastic buckling of hierarchical honeycomb materials
Chen, Q., & Pugno, N. M. (2012) · European Journal of Mechanics - A/Solids · doi:10.1016/j.euromechsol.2011.12.003 · Cited by 111

Authors: Gibson, L. J.
Affiliations: Massachusetts Institute of Technology (US)
Corresponding author: Gibson, Lorna J.
ORCID: Gibson, Lorna J.
Venue: Journal of Biomechanics
Publisher: Elsevier BV
Published: 2005-03
Volume: 38
Issue: 3
Pages: 377-399
ISSN: 0021-9290 (ISSN-L)
DOI: 10.1016/j.jbiomech.2004.09.027
OpenAlex: W2003488635
Cited by: 961
References: 82
Citations by year: 2026: 42 · 2025: 45 · 2024: 46 · 2023: 49 · 2022: 59 · 2021: 66 · 2020: 62 · 2019: 51 · 2018: 57 · 2017: 64 · 2016: 50 · 2015: 40 · 2014: 50 · 2013: 50 · 2012: 39
FWCI: 8.64
Type: journal article
Language: en
Open access: closed
Licence: www.elsevier.com/tdm/userlicense/1.0/ (tdm)
Locations: Journal of Biomechanics (publishedVersion)
PubMed (publishedVersion)
Topics: Physical Sciences › Engineering › Mechanical Engineering › Cellular and Composite Structures
Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
Physical Sciences › Engineering › Civil and Structural Engineering › Topology Optimization in Engineering
Keywords: cellular materials, wood, cork, trabecular bone, honeycomb microstructure, mechanical efficiency, sandwich structures, tubular structures, plant stems, engineered biomaterials, tissue regeneration
MeSH terms: Animals, Biocompatible Materials, Biomechanical Phenomena, Bone and Bones, Humans, Models, Biological, Tissue Engineering

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Biomechanics of cellular solids

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks