Cited by 961Cellular and Composite StructuresAdvanced Materials and MechanicsTopology Optimization in Engineering

The DOI matches its Crossref record; 82 of the 82 references it cites were found in a registry or an index.

Biomechanics of cellular solids

Gibson, Lorna J.·2005·Journal of Biomechanics

DOI 10.1016/j.jbiomech.2004.09.027

Open this paper in CoChat — free account

Abstract

Materials with a cellular structure are widespread in nature and include wood, cork, plant parenchyma and trabecular bone. Natural cellular materials are often mechanically efficient: the honeycomb-like microstructure of wood, for instance, gives it an exceptionally high performance index for resisting bending and buckling. Here we review the mechanics of a wide range of natural cellular materials and examine their role in lightweight natural sandwich structures (e.g. iris leaves) and natural tubular structures (e.g. plant stems or animal quills). We also describe two examples of engineered biomaterials with a cellular structure, designed to replace or regenerate tissue in the body.

Integrity signals

Registry

Crossref · 10.1016/j.jbiomech.2004.09.027

Cites

82 of 82 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Self-citation
Foam Structures with a Negative Poisson's Ratio
Lakes, R. S. (1987) · Science · doi:10.1126/science.235.4792.1038 · Cited by 3,917
Metal Foams: A Design Guide
Ashby, M., Evans, A. G., Fleck, N., Gibson, L. J., Hutchinson, J., Wadley, H. N. G., & Delale, F. (2001) · Applied Mechanics Reviews · doi:10.1115/1.1421119 · Cited by 2,695
Self-citation
Materials Selection in Mechanical Design
Ashby, M., & Cebon, D. (2011) · Elsevier eBooks · doi:10.1016/c2009-0-25539-5 · Cited by 2,688
The compressive behavior of bone as a two-phase porous structure
Carter, D., & Hayes, W. (1977) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-197759070-00021 · Cited by 2,001
The mechanics of three-dimensional cellular materials
Gibson, I. J., & Ashby, M. F. (1982) · Proceedings of the Royal Society of London A Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0088 · Cited by 1,895
Analysis and design of structural sandwich panels
Ogorkiewicz, R. M. (1970) · Composites · doi:10.1016/0010-4361(70)90244-2 · Cited by 1,762
Mechanics of Wood and Wood Composites
Bodig, J., & Jayne, B. A. (1982) · Medical Entomology and Zoology · Cited by 1,473
The mechanics of two-dimensional cellular materials
Gibson, L. J., Ashby, M. F., Schajer, G. S., & Robertson, C. I. (1982) · Proceedings of the Royal Society of London A Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0087 · Cited by 1,280
Self-citation
Preparation and characterization of poly(l-lactic acid) foams
Mikos, A. G., Thorsen, A. J., Czerwonka, L. A., Bao, Y., Langer, R., Winslow, D. N., & Vacanti, J. P. (1994) · Polymer · doi:10.1016/0032-3861(94)90953-9 · Cited by 1,196

Show all 82 references

Research works printed but not linked: 7

Bensusan, J.S., Davy, D.T., Heiple, K.G., Verdin, P.J., 1983. 19th Annual Orthopaedic Research Society Meeting 8, pp. 132.
Goodman, 1971, Orthotropic strength of wood in compression, Wood Science, 4, 83
Goree, 1962, Elastic stability of circular cylindrical shells stabilized by a soft elastic core, Experimental Mechanics, 2, 142
Guo, X.E., Kim, C.H., 1999. Effects of age-related bone loss: A 3D microstructural simulation. Proceedings of the 1999 Bioengineering Conference American Society of Mechanical Engineers Bioengineering Division, vol 42. pp. 327–328.
Lhommeau, 1998, Preparation of highly interconnected porous tyrosine-derived polycarbonate scaffolds, Tissue Engineering, 4, 468
Maddox, R.D., Carroll, J.W., Hollister, S.J., Mazumdar, J., Krebsbach, P.H., 2003. Gene/cell delivery from designed titanium scaffolds made by free-form fabrication. Society for Biomaterials 29th Annual Meeting Transactions. Reno, Nevada.
Patel, 1970, Structural features and mechanical properties of rigid cellular plastics, Journal of Materials, 5, 909

Sorted by citations

Items 801–900 of 959

Multiscale simulation of bone regeneration in ti ssue engineering processes
Castellano, M. D. (2008) · Cited by 2
Bioactive glass–based composites in bone tissue engineering: synthesis, processing, and cellular responses
Kumar, A., & Han, S. S. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816909-4.00013-0 · Cited by 2
Results and Discussion
Ghadimi, H., Ghani, S. A., & Amiri, I. S. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-813222-7.00003-6 · Cited by 2
Design and Analysis of Graded Open-cell Aluminum Foam Shock Absorber for Helicopter Seats During Emergency Landing Conditions
Davari, S. A., Galehdari, S. A., & Atrian, A. (2020) · doi:10.22084/jrstan.2020.20327.1117 · Cited by 2
Effects of Fe Staple-Fiber Spun-Yarns and Correlation Models on Textile Pressure Sensors
Choi, M., Vu, C. C., & Kim, J. (2022) · Sensors · doi:10.3390/s22093152 · Cited by 2
Starch Impregnation Effect of Testliner Paper on Stiffness of Honeycomb Panels with Slender Cells
Słonina, M., & Smardzewski, J. (2022) · Drvna industrija · doi:10.5552/drvind.2022.0024 · Cited by 2
Eccentric Loading on the Tibial Plate After Knee Replacement
Kadir, M. R. A., Kamsah, N., & Aziz, Z. A. A. (2008) · World Congress on Medical Physics and Biomedical Engineering, September 7 - 12, 2009, Munich, Germany · doi:10.1007/978-3-540-69139-6_102 · Cited by 2
Frontiers in research for bone biomaterials
Perikamana, S. K. M., Ahmad, T., Lee, S., & Shin, H. (2019) · Elsevier eBooks · doi:10.1016/b978-0-08-102478-2.00013-1 · Cited by 2
Systems, materials, and methodologies for multi-material hybrid additive manufacturing functionally graded structures
Sheydaeian, E. (2017) · UWSpace (University of Waterloo) · Cited by 2
3D printed-poly(lactic acid) scaffolds with improved bioactivity for bone tissue engineering
Teixeira, B. N. (2017) · Americanae (AECID Library) · Cited by 2
Polymeric Foams
Ruiz‐Herrero, J. L., Estravís, S., & Rodríguez‐Pérez, M. Á. (2017) · Kirk-Othmer Encyclopedia of Chemical Technology · doi:10.1002/0471238961.06150113192108.a01.pub2 · Cited by 2
Dynamique de milieux réticulés non contreventés : application aux bâtiments.
Chesnais, C. (2010) · doi:10.70675/cfc80118zde16z4f3azb67fzf5a14e3fa3de · Cited by 2
Fabrication of bioactive glass scaffolds by stereolithography for bone tissue engineering
Sabree, I. K. (2014) · Research Explorer (The University of Manchester) · Cited by 2
4D-printed structures with tunable mechanical properties
Abuzaid, W. Z., Yousuf, M. H., & Alkhader, M. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-95430-3.00006-3 · Cited by 1
Low-velocity impact response of novel hierarchical hexagonal multicell structures
Hafid, M., Nurrohmad, A., Hidayat, D., Ardiansyah, R., Marta, A., Rosalia, C. A., & Zaini, A. (2025) · International Journal of Lightweight Materials and Manufacture · doi:10.1016/j.ijlmm.2025.07.008 · Cited by 4
In Vitro Free Implantation of Stem Cells from Apical Papilla Using Injectable Hydrogel‐Laden 3D‐Printed Scaffold to Enhance Tissue Organization and Vascular Infiltration In Vivo
Huang, Z., Liang, C., Wu, Z., Chen, S., Li, F., Cho, K.-H., Maeng, W., Lee, Y., Park, S. A., Choi, Y., et al. (2025) · Advanced NanoBiomed Research · doi:10.1002/anbr.202500006 · Cited by 1
A Polyurethane Foam Bone Analogue Material Model for Computational Simulations: Calibration, Validation, and the Impact of Crushable Foam Yield Stress Ratio
Sadeqi, S., & Shetye, S. S. (2025) · Journal of Biomechanical Engineering · doi:10.1115/1.4070191 · Cited by 1
A study on the biomechanical properties of cancellous bone across different regions of the proximal humerus
Zhang, J., Quan, Y., Li, Z., Li, Y., Zhang, Y., Hu, J., Gao, J., & Chen, W. (2025) · Journal of Orthopaedic Surgery and Research · doi:10.1186/s13018-025-06486-5 · Cited by 1
Experimental and numerical analysis of a 3D-foam model subjected to uniaxial compression and low-velocity impact loading
Gurmu, D. N., Wacławiak, K., & Lemu, H. G. (2026) · Results in Engineering · doi:10.1016/j.rineng.2026.109315 · Cited by 1
Fabricating ordered porous β-tricalcium phosphate ceramics having specific structure via the replica method using 3D-CAD-designed polymeric templates
Hashimoto, K., Ohtsuki, N., Tsuchiya, K., Nozaki, K., Yamashita, K., & Shibata, H. (2026) · Open Ceramics · doi:10.1016/j.oceram.2026.100928 · Cited by 1
Bioinspired123D: generative 3D modeling system for bioinspired structures
Luu, R. K., & Buehler, M. J. (2026) · AI for Science · doi:10.1088/3050-287x/ae61d1 · Cited by 1
Machine learning-driven multi-objective optimization of Gyroid bioglass scaffolds for site-specific biomechanical adaptation
Guo, M., Chen, D., Zheng, L., Ai, L., Wang, C., Apicella, A., & Wang, L. (2026) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2026.107484 · Cited by 1
Semi-analytical finite element modelling of wave dispersion in pouch batteries
Wu, H., Yin, T., & Ng, C. (2026) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2026.111799 · Cited by 1
Bioinspired dry adhesives: From challenging surface adhesion to controllable release
Wang, D., Liu, H., Li, Y., Lan, T., Shao, Y., Wei, R., Fu, S., Yi, R., Ren, Y., Ye, S., et al. (2026) · Advanced bionics. · doi:10.1016/j.abs.2026.08.001 · Cited by 1
Computer Simulation for Bone Scaffolds on Account of Fluid-Solid Coupling Model
Yanen, W., Sheng-min, W., Yan, X.-T., Chen, Y., & Ming, Y. (2009) · International Forum on Computer Science-Technology and Applications · doi:10.1109/ifcsta.2009.301 · Cited by 1
The effect of resorption cavities on bone stiffness is site dependent
Vanderoost, J., & van Lenthe, H. (2013) · Computer Methods in Biomechanics & Biomedical Engineering · doi:10.1080/10255842.2012.753065 · Cited by 1
The effect of surface morphology on Model-I fracture toughness of carbon fiber reinforced titanium laminates
Zheng, Z., Pan, L., Duan, L., Shen, Y., Hu, Y., Aamir, A., Bhuwan, S., & Tao, J. (2016) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/137/1/012029 · Cited by 1
Some Use Cases for Composite Finite Elements in Image Based Computing
Schwen, L. O., Pätz, T., & Preußer, T. (2016) · Springer eBooks · doi:10.1007/978-3-319-28329-6_11 · Cited by 1
Biomecánica del tejido óseo
Chabrand, P. R. (2018) · EMC - Aparato Locomotor · doi:10.1016/s1286-935x(18)92752-8 · Cited by 1
Natural Material Source of Bagasse Cellulose and Their Application to Hydrogel Films
Carrillo, K. L. T., & Kobayashi, T. (2016) · Advances in environmental engineering and green technologies book series · doi:10.4018/978-1-5225-1971-3.ch002 · Cited by 1
Mathematical Modeling of 3D Tissue Engineering Constructs
Almeida, H. A., & Bártolo, P. (2018) · Springer eBooks · doi:10.1007/978-3-319-45444-3_5 · Cited by 1
几种天然高分子泡沫体的组成、结构与力学性能
王, 才., 董, 宇., 潘, 则., & 尹, 作. (2007) · Chinese Science Bulletin (Chinese Version) · doi:10.1360/csb2007-52-9-1075 · Cited by 1
A Homogenized Model for Honeycomb Cellular Materials
Davini, C., & Ongaro, F. (2011) · Springer eBooks · doi:10.1007/978-94-007-1884-5_14 · Cited by 1
Structural, microstructural, and textural modifications of meringues induced by low-pressure baking process
Scolan, J.-B., Vennat, E., Smaniotto, B., Pillard, L., Corlay, F., & Haumont, R. (2023) · International Journal of Gastronomy and Food Science · doi:10.1016/j.ijgfs.2023.100767 · Cited by 1
Compressive Response of Polyurethane Open-Cell Foam with Electrodeposited Copper Coatings
Janphongsri, W., Boonyongmaneerat, Y., & Jearanaisilawong, P. (2014) · Advanced materials research · doi:10.4028/www.scientific.net/amr.931-932.381 · Cited by 1
Elasticity and Viscoelasticity of Open Cellular Material: Micromechanical Approach
Maalej, Y., Ghezal, M. I. E., & Doghri, I. (2013) · Lecture notes in mechanical engineering · doi:10.1007/978-3-642-37143-1_64 · Cited by 1
THE BIOMIMETIC APPROACH TO SELF HEALING POLYMER COMPOSITE DEVELOPMENT IN THE AEROSPACE INDUSTRY
Meure, S., & Wu, D. (2007) · Cited by 1
Numerical Investigation of 3D Lattice Infill Pattern Cellular Structure for Orthopedic Implant Design
Alkentar, R., Huri, D., & Mankovits, T. (2022) · Mechanisms and machine science · doi:10.1007/978-3-030-88465-9_45 · Cited by 1
MÉTHODOLOGIE DE CONCEPTION ET D'OPTIMISATION DE MÉCANISMES FABRIQUÉS PAR FABRICATION RAPIDE
Rodrigue, H. (2010) · PolyPublie (École Polytechnique de Montréal) · Cited by 1
Mechanobiology of healing and regeneration of bone
Vetter, A. C. (2010) · edoc Publication server (Humboldt University of Berlin) · doi:10.18452/16130 · Cited by 1
Mechanics of three dimensional cellular structures
Babaee, S. (2011) · doi:10.17760/d20002053 · Cited by 1
Discrete cellular lattice assembly
Carney, M. E. (2015) · DSpace@MIT (Massachusetts Institute of Technology) · Cited by 1
Osteoarthritic cancellous bone seems to orientate its structure to compensate for tissue degeneration
Öhman, C., Tassani, S., Perilli, E., Baruffaldi, F., Baleani, M., & Viceconti, M. (2009) · World Congress on Medical Physics and Biomedical Engineering, September 7 - 12, 2009, Munich, Germany · doi:10.1007/978-3-642-03882-2_368 · Cited by 1
Mechanical Reinforcement of Bioglass®-Based Scaffolds
Bertolla, L. (2015) · Brno University of Technology Digital Library (Brno University of Technology) · Cited by 1
Numerical investigation into fracture resistance of bone following adaptationPreprint
Lewandowski, K., Kaczmarczyk, Ł., Athanasiadis, I., Marshall, J. F., & Pearce, C. J. (2020) · arXiv (Cornell University) · doi:10.48550/arxiv.2001.00647 · Cited by 1
Results and Discussion
Gualandi, C. (2011) · Springer theses · doi:10.1007/978-3-642-19272-2_3 · Cited by 1
Integration of Naturally Occurring Materials in Lightweight Aerostructures
Silva, J., Gardi, A., & Sabatini, R. (2023) · doi:10.1002/9781118932599.ch13 · Cited by 1
Low-Velocity Impact Response of 3d-Printed Hierarchical Hexagonal Multicell StructuresPreprint
Hafid, M., Nurrohmad, A., Hidayat, D., Ardiansyah, R., Marta, A., Rosalia, C. A., & Zaini, A. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5097761 · Cited by 1
Synthesis of Layered, Graded Bioscaffolds
Weisgerber, D. W., Caliari, S. R., & Harley, B. A. C. (2012) · Springer eBooks · doi:10.1007/978-1-4614-3317-0_16
Preparation of hybrid scaffold based on PVA and bioactive glass ceramics
Sourav, S. (2014)
Metody symulacji komputerowej w badaniach reakcji tkanki kostnej na obciążenia i w projektowaniu implantów
Krzesiński, G. (2012) · Prace Naukowe Politechniki Warszawskiej. Mechanika
Comportamiento mecánico de materiales celulares de carburo de silicio
Mata, M. P. (2008) · doi:10.20868/upm.thesis.1264
Estudio de la biomecánica del procedimiento de vertebroplastia
González, S. G. (2014) · doi:10.5821/dissertation-2117-95605
On Computational Homogenization of Fluid-filled Porous Materials
Sandström, C. (2015) · Chalmers Research (Chalmers University of Technology)
Mechanical Properties of a Novel Kind of Biomass Cellular Material Prepared from Forage Grass
Yun, C. L., Luo, X. G., & Lin, X. Y. (2013) · Advanced materials research · doi:10.4028/www.scientific.net/amr.734-737.2302
Double Layer Porous Structures by an Injection Molding/Particulate Leaching Approach
Saatchi, M., Behl, M., & Lendlein, A. (2014) · Macromolecular Symposia · doi:10.1002/masy.201400158
The Study of Effects of Temperature on Contact Strengths of Thick-Walled Cellular Solids
Xie, F., & Liu, Z. M. (2010) · Advanced materials research · doi:10.4028/www.scientific.net/amr.160-162.1233
Effect of an External Force Field on Self‐Ordering of Three‐Phase Cellular Fluids in Two Dimensions
Nowicki, W., & Nowicka, G. (2009) · doi:10.1002/9783527626564.ch5
Outcome after reconstruction of the anterior cruciate ligament in athletic patients
Padua, L., Bondì, R., & Ceccarelli, E. (2004) · Journal of Bone and Joint Surgery - British Volume · doi:10.1302/0301-620x.86b2.15206
Promising results Halt phase III studies of idelalisib.
Inman, S. (2014) · PubMed
Bone Strength Multi-axial Behavior - Volume Fraction, Anisotropy and Microarchitecture
Sanyal, A. (2013) · eScholarship (California Digital Library)
Elaboração de uma ferramenta computacional para modelagem de proteses e ossos atraves da proelasticidade acoplada
Moura, M. D. S. (2007) · doi:10.47749/t/unicamp.2007.413174
In-structure shock assessment and mitigation of structures
Zhou, H. (2012) · doi:10.32657/10356/49983
Mapping the Mechanical Properties of Cancellous Bone from the Femoral Head
Kun, K. N., Kun, L., Nagy, R., Menyhardt, K., Silaghi-Perju, D., Nes, C. S., & Andor, B. (2015) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.801.273
Porous Ceramics Including Fibrous Insulation, Structure and Properties of
Fukushima, M., Ohji, T., Colombo, P., & Yoshizawa, Y. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.01956-1
Investigating impact performance of hedgehog spines through FEA static Compression
Yoder, T. M. (2016)
Morphology and Properties of Closed Cell Rubber Foams
Vahidifar, A., Khorasani, S. N., & Esmizadeh, E. (2015)
Simulation of deformation behavior of porous Titanium using Modified Gurson yield function
Basir, E. A., & Narooei, K. (2016) · Iranian Journal of Materials Forming · doi:10.22099/ijmf.2016.3861
Enhanced resistance of nanocellular silica to dynamic indentation
Zhao, C., & Qiao, Y. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.03.091
Improvement of Q0 dummy restraint in lateral sled impacts regarding R129 criteria
Tellier, B. L., Pormente, S., Bourdet, N., Renaudin, F., & Willinger, R. (2017) · International Journal of Crashworthiness · doi:10.1080/13588265.2017.1306825
Osteocytes as Mechanosensory Cells: from Extracellular Structure to Intracellular Signals
Zhao, Y. (2009) · TSpace (University of Toronto)
Three-Dimensional Nano-Architected Materials as Platforms for Designing Effective Bone Implants
Maggi, A. (2018) · CaltechTHESIS (California Institute of Technology) · doi:10.7907/z947482k
Leichtbauprinzipien
Lichtenegger, H. C., Rammerstorfer, F. G., Daxner, T., & Eichlseder, W. (2009) · doi:10.1002/9783527628247.ch1
TARGETED DESIGN OF CO-CONTINUOUS NANOSTRUCTURES IN COPOLYMERS
Zeng, D. (2021) · Scholarworks (University of Massachusetts Amherst) · doi:10.7275/12947702
Monotonic and cyclic behaviour of trabecular bone under uniaxial and multiaxial loading
Januddi, M. S., & Januddi, M. A. F. M. S. (2015)
Determining Effective Elasticity Parameters of Microstuctured Materials
Schwen, L. O., Wolfram, U., Wilke, H., & Rumpf, M. (2008)
Development of the porous bone scaffold utilizing 3-dimensional CAD and solid freeform fabrication method
김정성 (2011)
Mechanical and biocompatibility analyses of metabiomaterials cobalt chrome molybdenum manufactured by selective laser melting for load bearing implant
Rohaida, M. S. (2017) · UMP Institutional Repository (Universiti Malaysia Pahang)
Structural characterization of solid cellular polymers by X-ray tomography and light scattering
Pérez-Tamarit, S. (2019) · doi:10.35376/10324/36273
Use of water-soluble precursors in the production of cast metal foams
Kroupová, I., Lichý, P., & Lána, I. (2020) · Materiali in tehnologije · doi:10.17222/mit.2019.144
Applications of Decellularized Materials for Tissue Repair
Liu, B., Bi, X., He, Y., & Li, X. (2021) · Springer eBooks · doi:10.1007/978-981-33-6962-7_4
Magnesium-based bioresorbable cellular metal as bone substitute
Pérez, P., & Marcela, V. (2021)
Crashworthiness of a vehicle for rollover impact protection using IMPAXX and aluminum foam materials
Narayan, S. (2019) · Holmes Museum Of Anthropology (Wichita State University)
Conductive materials for tissue engineering and health monitoring systems
Zhang, X. (2020) · Mspace (University of Manitoba)
Otimização de revestimentos em rolhas naturais
Pedra, C. S. V. (2013) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) · doi:10.34626/1spa-dr36
DESIGN AND MANUFACTURING OF AN OPTIMIZED MOULD INSERT BY DMLS TECHNOLOGY
Coranič, T. (2021) · MM Science Journal · doi:10.17973/mmsj.2021_12_2021186
Architecture of a nanocrystalline biomineralised shell
Mucadam, R. M.-M. (2014) · doi:10.26686/wgtn.17142911
Architecture of a nanocrystalline biomineralised shell
Mucadam, R. M.-M. (2014) · doi:10.26686/wgtn.17142911.v1
Elaboración de matrices de celulosa con propiedades antimicrobianas para su aplicación en periodoncia
González, E. V., Donohué-Cornejo, A., García-Calderón, A. G., Rojas, J. L. O., Gastelum, D. A. G., Cuevas‐González, J. C., Cristóbal, L. F. E., Calderón, R. E. G., Estrada, R. P., & Carrillo, K. L. T. (2021) · Revista Mexicana de Periodontología · doi:10.35366/102953
Polymeric Foams
Ruiz‐Herrero, J. L., & Rodríguez‐Pérez, M. Á. (2015) · Encyclopedia of Polymer Science and Technology · doi:10.1002/0471440264.pst634
Porous Ceramics Including Fibrous Insulation, Structure and Properties of
Fukushima, M., Ohji, T., Colombo, P., & Yoshizawa, Y. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-818542-1.01956-1
Bibliography
(2018) · Elsevier eBooks · doi:10.1016/b978-1-78548-208-3.50017-4
The Study of Effects of Temperature on Contact Strengths of Thick-Walled Cellular Solids
Xie, F., & Liu, Z. M. (2010) · Advanced materials research · doi:10.4028/www.scientific.net/amr.160-162.353
Caracterización y modelización de materiales compuestos de AA6063 con espumas cerámicas y metálicas
Garzón, A. M. S. D. L. M. (2021) · doi:10.20868/upm.thesis.67357
Experimental & Statistical Parametric Investigation of CWML Sandwich Panel
(2017) · International Journal of Innovations in Engineering and Technology · doi:10.21172/ijiet.81.023
Analysis of the topological motifs of the cellular structure of the tri-spine horseshoe crab (Tachypleus tridentatus) and its associated mechanical properties
Ma, Y., Guo, C., Shen, J., & Wang, Y. (2022) · Bioinspiration & Biomimetics · doi:10.1088/1748-3190/ac9207
Influence of pore‐structure characteristics on the mechanical properties of open‐porous cellular materials
Aney, S., Ratke, L., Milow, B., & Rege, A. (2023) · PAMM · doi:10.1002/pamm.202200260
Microlattice metamaterials
Song, B., Zhang, L., & Shi, Y. (2023) · Elsevier eBooks · doi:10.1016/b978-0-443-18900-5.00006-x
Computational Design and Analysis of Shell Topologies driven by Different Microstructural Patterns found in Natural Materials
Battal, A., & Yazıcı, S. (2023) · eCAADe proceedings · doi:10.52842/conf.ecaade.2023.2.297
Cost and Weight Optimization of Recyclable Honeycomb Sandwich Panels
Rao, S. M., & Chen, J. (2023) · Sustainable aviation · doi:10.1007/978-3-031-33118-3_16

Authors: Gibson, L. J.
Affiliations: Massachusetts Institute of Technology (US)
Corresponding author: Gibson, Lorna J.
ORCID: Gibson, Lorna J.
Venue: Journal of Biomechanics
Publisher: Elsevier BV
Published: 2005-03
Volume: 38
Issue: 3
Pages: 377-399
ISSN: 0021-9290 (ISSN-L)
DOI: 10.1016/j.jbiomech.2004.09.027
OpenAlex: W2003488635
Cited by: 961
References: 82
Citations by year: 2026: 42 · 2025: 45 · 2024: 46 · 2023: 49 · 2022: 59 · 2021: 66 · 2020: 62 · 2019: 51 · 2018: 57 · 2017: 64 · 2016: 50 · 2015: 40 · 2014: 50 · 2013: 50 · 2012: 39
FWCI: 8.64
Type: journal article
Language: en
Open access: closed
Licence: www.elsevier.com/tdm/userlicense/1.0/ (tdm)
Locations: Journal of Biomechanics (publishedVersion)
PubMed (publishedVersion)
Topics: Physical Sciences › Engineering › Mechanical Engineering › Cellular and Composite Structures
Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
Physical Sciences › Engineering › Civil and Structural Engineering › Topology Optimization in Engineering
Keywords: cellular materials, wood, cork, trabecular bone, honeycomb microstructure, mechanical efficiency, sandwich structures, tubular structures, plant stems, engineered biomaterials, tissue regeneration
MeSH terms: Animals, Biocompatible Materials, Biomechanical Phenomena, Bone and Bones, Humans, Models, Biological, Tissue Engineering

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Biomechanics of cellular solids

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks