The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Fresh and hardened properties of one-part fly ash-based geopolymer binders cured at room temperature: Effect of slag and alkali activators
Abstract
Abstract Geopolymers are considered to be a sustainable and environmentally friendly replacement for ordinary Portland cement as they lead to a reduction in carbon footprint. The dosage and type of precursors and alkali activators have been known to be important parameters affecting the fresh and hardened properties of geopolymers. This study investigates the effect of slag content as well as type and dosage of alkali activators on one-part fly ash-based geopolymers cured at room temperature. Different ratios of fly ash were replaced with slag as a CaO-rich precursor. Setting time and flowability tests were carried out to evaluate the fresh properties, compressive and flexural strength experiments were conducted to determine the mechanical properties of the geopolymers. The mineralogy and microstructure of the samples were evaluated by Optical microscope, X-ray Diffraction (XRD) and Scanning Electron Microscope (SEM-EDS) analysis. The experimental results revealed that the increase of slag content improved the strength and reduced workability. Moreover, some microcracks were observed when over 15% of fly ash was replaced with slag. In terms of activators, the sodium metasilicate anhydrous provided optimum strength and higher flowability compared to the others. Microstructural analysis results showed the presence of more unreacted particles when less than 8% Na2SiO3 content as alkaline activator and also less than 15% slag as replacement was used in the system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
One-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
Yip, C. K., Lukey, G. C., & van Deventer, J. S. J. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.10.042 · Cited by 1,274
Fly ash-based geopolymer: clean production, properties and applications
Zhuang, X. Y., Chen, L., Komarneni, S., Zhou, C. H., Tong, D. S., Yang, H. M., Yu, W. H., & Wang, H. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.03.019 · Cited by 1,020
NaOH-activated ground fly ash geopolymer cured at ambient temperature
Somna, K., Jaturapitakkul, C., Kajitvichyanukul, P., & Chindaprasirt, P. (2011) · Fuel · doi:10.1016/j.fuel.2011.01.018 · Cited by 995
A review on emission analysis in cement industries
Ali, M. B., Saidur, R., & Hossain, M. S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.02.014 · Cited by 941
Influence of calcium compounds on the mechanical properties of fly ash geopolymer pastes
Temuujin, J., van Riessen, A., & Williams, R. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.12.121 · Cited by 834
Production of bricks from waste materials – A review
Zhang, L. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.05.043 · Cited by 778
Lee, N. K., & Lee, H. K. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.05.107 · Cited by 754
Designing Precursors for Geopolymer Cements
Duxson, P., & Provis, J. L. (2008) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2008.02787.x · Cited by 662
Role of slag in microstructural development and hardening of fly ash-slag geopolymer
Puligilla, S., & Mondal, P. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2012.10.004 · Cited by 624
Miller, S. A., Horvath, A., & Monteiro, P. J. M. (2016) · Environmental Research Letters · doi:10.1088/1748-9326/11/7/074029 · Cited by 589
Durability of Alkali‐Activated Materials: Progress and Perspectives
Bernal, S. A., & Provis, J. L. (2014) · Journal of the American Ceramic Society · doi:10.1111/jace.12831 · Cited by 547
Kim, M. S., Jun, Y., Lee, C., & Oh, J. E. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.09.011 · Cited by 518
Oh, J. E., Monteiro, P. J. M., Jun, S. S., Choi, S., & Clark, S. M. (2009) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.10.010 · Cited by 507
van Deventer, J. S. J., Provis, J. L., Duxson, P., & Brice, D. G. (2010) · Waste and Biomass Valorization · doi:10.1007/s12649-010-9015-9 · Cited by 494
Mechanical and microstructural properties of alkali-activated fly ash geopolymers
Komljenović, M., Baščarević, Z., & Bradić, V. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.04.064 · Cited by 446
Nematollahi, B., Sanjayan, J., & Shaikh, F. U. A. (2015) · Ceramics International · doi:10.1016/j.ceramint.2014.12.154 · Cited by 426
Development of geopolymer mortar under ambient temperature for in situ applications
Al-Majidi, M. H., Lampropoulos, A., Cundy, A., & Meikle, S. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.05.085 · Cited by 410
Rashad, A. M. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.07.074 · Cited by 387
Saha, S., & Rajasekaran, C. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.139 · Cited by 380
Mehta, A., & Siddique, R. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.313 · Cited by 325
Opc-fly ash cementitious systems: study of gel binders produced during alkaline hydration
Palomo, A., Fernández-Jiménez, A., Kovalchuk, G., Ordoñez, L. M., & Naranjo, M. C. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0585-7 · Cited by 290
CO2 activated steel slag-based materials: A review
Humbert, P. S., & Castro-Gomes, J. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.10.058 · Cited by 276
Sustainable concrete: Building a greener future
Assi, L., Carter, K., Deaver, E. (., Anay, R., & Ziehl, P. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.07.123 · Cited by 273
Cement industry of China: Driving force, environment impact and sustainable development
Shen, W., Liu, Y., Yan, B., Wang, J., He, P., Zhou, C., Huo, X., Zhang, W., Xu, G., & Ding, Q. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.11.033 · Cited by 269
Tan, H., Zhang, X., He, X., Guo, Y., Deng, X., Su, Y., Yang, J., & Wang, Y. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.09.027 · Cited by 268
Shrinkage and strength development of alkali-activated fly ash-slag binary cements
Hojati, M., & Radlińska, A. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.06.040 · Cited by 217
Qin, L., Gao, X., & Chen, T. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.04.238 · Cited by 215
One-part geopolymer cement from slag and pretreated paper sludge
Adesanya, E., Ohenoja, K., Luukkonen, T., Kinnunen, P., & Illikainen, M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.007 · Cited by 202
Alternation of traditional cement mortars using fly ash-based geopolymer mortars modified by slag
Shang, J., Dai, J.-G., Zhao, T.-J., Guo, S.-Y., Zhang, P., & Mu, B. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.255 · Cited by 197
Green Concrete mix using solid waste and nanoparticles as alternatives – A review
Vishwakarma, V., & Ramachandran, D. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.11.174 · Cited by 192
Greenhouse gas emissions of different fly ash based geopolymer concretes in building construction
Sandanayake, M., Gunasekara, C., Law, D., Zhang, G., & Setunge, S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.311 · Cited by 185
Activating solution chemistry for geopolymers
Provis, J. L. (2009) · Geopolymers · doi:10.1533/9781845696382.1.50 · Cited by 184
Zhang, C.-Y., Han, R., Yu, B., & Wei, Y.-M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.02.284 · Cited by 175
Room temperature alkali activation of fly ash: The effect of Na2O/SiO2 ratio
Bignozzi, M. C., Manzi, S., Natali, M. E., Rickard, W. D. A., & van Riessen, A. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.07.062 · Cited by 143
Shi, C., Shi, Z., Hu, X., Zhao, R. X., & Chong, L. (2015) · Materials and Structures · doi:10.1617/s11527-014-0505-2 · Cited by 133
Development and Characterization of Fly Ash–Slag Blended Geopolymer Mortar and Lightweight Concrete
Ismail, N., & El-Hassan, H. (2018) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0002209 · Cited by 120
Perná, I., & Hanzlíček, T. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.05.069 · Cited by 97
Shekhovtsova, J., Zhernovsky, I. V., Kovtun, M., Kozhukhova, N. I., Zhernovskaya, I., & Kearsley, E. P. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.270 · Cited by 91
Effects of relative humidity on the properties of fly ash-based geopolymers
Oderji, S. Y., Chen, B., & Jaffar, S. T. A. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.07.115 · Cited by 73
Self-citationKhedmati, M., Alanazi, H., Kim, Y., Nsengiyumva, G., & Moussavi, S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.10.024 · Cited by 58
Cited by
Advances in geopolymer materials: A comprehensive review
Cong, P., & Cheng, Y. (2021) · Journal of Traffic and Transportation Engineering (English Edition) · doi:10.1016/j.jtte.2021.03.004 · Cited by 481
Geopolymer concrete as sustainable material: A state of the art review
Farooq, F., Jin, X., Faisal Javed, M., Akbar, A., Izhar Shah, M., Aslam, F., & Alyousef, R. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124762 · Cited by 344
Factors Affecting the Compressive Strength of Geopolymers: A Review
Castillo, H., Collado, H., Droguett, T., Sánchez, S., Vesely, M., Garrido, P., & Palma, S. (2021) · Minerals · doi:10.3390/min11121317 · Cited by 231
Li, Q., Zhang, L., Gao, X., & Zhang, J. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.116990 · Cited by 135
Ambient-cured geopolymer concrete with single alkali activator
Zannerni, G. M., Fattah, K. P., & Al-Tamimi, A. K. (2020) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2019.e00131 · Cited by 108
Metadata
- Authors
- Yousefi Oderji, S., Chen, B., Ahmad, M. R., & Shah, S. F. A.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 225
- Pages
- 1-10
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2932346248
- Cited by
- 360
- References
- 41
- FWCI
- 27.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.