The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Strength, microstructure, efflorescence behavior and environmental impacts of waste glass geopolymers cured at ambient temperature
Abstract
In this study, waste glass powder (d50 = 15.4 μm) obtained by crushing soda lime glass bottles was investigated as a raw material for geopolymer cement. The waste glass (WG) powder and class C fly ash (FC) were mixed at varying ratios (100:0, 75:25, 50:50, 25:75, 0:100) and activated by sodium hydroxide solutions of different concentrations (0 M, 2.5 M, 5 M, 7.5 M, 10 M). The geopolymer pastes were cured at ambient temperature and the compressive strengths at increasing curing ages were tested. The mechanical properties were analyzed with respect to the kinetics and Si/Al ratio of the reaction system. The experimental results suggested that the WG mostly acted as an inert filler at early ages due to the slow reaction rate. However, the strength performance improved significantly after the curing age of 14 days, which was attributed to the reaction between WG and FC. The geopolymer made by mixing WG and FC at a ratio of 1:3 (Si/Al = 3.038) and 5 Mol NaOH solution achieved a compressive strength of 34.5 MPa. The microstructure and minerology of the geopolymers analyzed by the SEM-EDX and XRD suggested the coexistence of sodium aluminate silicate hydrate (N-A-S-H) gel and calcium aluminate silicate hydrate (C-A-S-H) gel in geopolymer matrix. The results of leaching tests indicated the potential environmental impact caused by the leaching of excessive alkali, which should be carefully managed during the mix design. The sustainability analysis including the embodied energy and carbon footprint confirmed the environmental friendliness of WG geopolymer. This study exhibited the feasibility of producing WG geopolymer concrete at ambient temperature and the potential synergy between the waste glass recycling and geopolymer industry.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Geopolymers and Related Alkali-Activated Materials
Provis, J. L., & Bernal, S. A. (2014) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070813-113515 · Cited by 1,597
Garcia-Lodeiro, I., Palomo, A., Fernández-Jiménez, A., & Macphee, D. E. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.05.006 · Cited by 1,366
Lothenbach, B., Kulik, D. A., Matschei, T., Balonis, M., Baquerizo, L., Dilnesa, B., Miron, G. D., & Myers, R. J. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.018 · Cited by 1,250
NaOH-activated ground fly ash geopolymer cured at ambient temperature
Somna, K., Jaturapitakkul, C., Kajitvichyanukul, P., & Chindaprasirt, P. (2011) · Fuel · doi:10.1016/j.fuel.2011.01.018 · Cited by 995
Influence of NaOH solution on the synthesis of fly ash geopolymer
Rattanasak, U., & Chindaprasirt, P. (2009) · Minerals Engineering · doi:10.1016/j.mineng.2009.03.022 · Cited by 939
Influence of calcium compounds on the mechanical properties of fly ash geopolymer pastes
Temuujin, J., van Riessen, A., & Williams, R. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.12.121 · Cited by 834
Barcelo, L., Kline, J., Walenta, G., & Gartner, E. (2014) · Materials and Structures · doi:10.1617/s11527-013-0114-5 · Cited by 816
Synthesis and characterization of red mud and rice husk ash-based geopolymer composites
He, J., Jie, Y., Zhang, J., Yu, Y., & Zhang, G. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.11.010 · Cited by 770
Studies on concrete containing ground waste glass
Shao, Y., Lefort, T., Moras, S., & Rodriguez, D. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00213-6 · Cited by 742
Reaction mechanisms in the geopolymeric conversion of inorganic waste to useful products
van Deventer, J. S. J., Provis, J. L., Duxson, P., & Lukey, G. C. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.02.044 · Cited by 580
Fly ash-based geopolymers: The relationship between composition, pore structure and efflorescence
Zhang, Z., Provis, J. L., Reid, A., & Wang, H. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.06.004 · Cited by 527
Durability of alkali-activated binders: A clear advantage over Portland cement or an unproven issue?
Pacheco-Torgal, F., Abdollahnejad, Z., Camões, A. F., Jamshidi, M., & Ding, Y. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.12.017 · Cited by 480
Phoo-ngernkham, T., Chindaprasirt, P., Sata, V., Hanjitsuwan, S., & Hatanaka, S. (2014) · Materials & Design · doi:10.1016/j.matdes.2013.09.049 · Cited by 452
Design and preparation of ultra-high performance concrete with low environmental impact
Shi, Y. H., Long, G., Ma, C., Xie, Y., & He, J. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.12.318 · Cited by 352
Ranjbar, N., Mehrali, M., Alengaram, U. J., Metselaar, H. S. C., & Jumaat, M. Z. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.04.064 · Cited by 321
Waste glass as partial mineral precursor in alkali-activated slag/fly ash system
Zhang, S., Keulen, A., Arbi, K., & Ye, G. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.08.012 · Cited by 283
Properties and characterization of green one-part geopolymer activated by composite activators
Ma, C., Zhao, B., Guo, S., Long, G., & Xie, Y. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.02.159 · Cited by 273
Comparative LCA on using waste materials in the cement industry: A Hong Kong case study
Hossain, M. U., Poon, C. S., Lo, I. M. C., & Cheng, J. C. P. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2016.12.012 · Cited by 272
Ma, C., Long, G., Shi, Y., & Xie, Y. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.060 · Cited by 253
Properties of inorganic polymer (geopolymer) mortars made of glass cullet
Cyr, M., Idir, R., & Poinot, T. (2011) · Journal of Materials Science · doi:10.1007/s10853-011-6107-2 · Cited by 232
Recycling of glass: accounting of greenhouse gases and global warming contributions
Larsen, A. W., Merrild, H., & Christensen, T. H. (2009) · Waste Management & Research: The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x09342148 · Cited by 204
Jiang, M., Chen, X., Rajabipour, F., & Hendrickson, C. T. (2014) · Journal of Infrastructure Systems · doi:10.1061/(asce)is.1943-555x.0000211 · Cited by 203
Blengini, G. A., Busto, M., Fantoni, M., & Fino, D. (2011) · Waste Management · doi:10.1016/j.wasman.2011.10.018 · Cited by 175
Nie, Q., Hu, W., Ai, T., Huang, B., Shu, X., & He, Q. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.08.144 · Cited by 154
Self-citationMa, C., Zhao, B., Wang, L., Long, G., & Xie, Y. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119279 · Cited by 136
Residential solid waste generation and recycling in the U.S.A. and Japan
Matsuto, T., & Ham, R. K. (1990) · Waste Management & Research The Journal for a Sustainable Circular Economy · doi:10.1016/0734-242x(90)90066-v · Cited by 18
Cited by
Amran, M., Debbarma, S., & Ozbakkaloglu, T. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121857 · Cited by 532
Advances in geopolymer materials: A comprehensive review
Cong, P., & Cheng, Y. (2021) · Journal of Traffic and Transportation Engineering (English Edition) · doi:10.1016/j.jtte.2021.03.004 · Cited by 481
Recent advances in the concrete industry to reduce its carbon dioxide emissions
Adesina, A. (2020) · Environmental Challenges · doi:10.1016/j.envc.2020.100004 · Cited by 384
Zhao, J., Tong, L., Li, B., Chen, T., Wang, C., Yang, G., & Zheng, Y. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127085 · Cited by 369
Clayey soil stabilization using alkali-activated volcanic ash and slag
Miraki, H., Shariatmadari, N., Ghadir, P., Jahandari, S., Tao, Z., & Siddique, R. (2022) · Journal of Rock Mechanics and Geotechnical Engineering · doi:10.1016/j.jrmge.2021.08.012 · Cited by 276
Metadata
- Authors
- Xiao, R., Ma, Y., Jiang, X., Zhang, M., Zhang, Y., Wang, Y., Huang, B., & He, Q.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2020-04
- Volume
- 252
- Pages
- 119610
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2995173126
- Cited by
- 359
- References
- 27
- FWCI
- 33.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.