The DOI matches its Crossref record; 126 of the 126 references it cites were found in a registry or an index.
Eco-friendly geopolymer materials: A review of performance improvement, potential application and sustainability assessment
Abstract
The traditional cement production wastes a large amount of natural resources and energy, and causes environmental pollution, which cannot meet the green and sustainable development needs of modern building materials. Geopolymer is an environmentally friendly materials that can utilize industrial solid wastes and have low environmental load and energy consumption, which is expected to become a substitute for OPC. However, geopolymers also have shortcomings in some properties that need to be improved. This paper reviews the recent research progress on the performance improvement, potential new applicationw and sustainability assessment of geopolymer materials. Discussion from this paper showed that the properties of geopolymer materials, including rheology, hardening properties, toughness, etc., can be significantly improved by some methods such as chemical additives, mineral admixtures, nanoparticles, fibers, etc. Furthermore, this paper proves that geopolymers have great application potential as porous thermal insulation materials and 3D printing building materials, and points out some performance optimization methods for geopolymer-based porous materials and 3D printing materials. In this work, it was also concluded that geopolymer shows significant advantages over OPC in sustainable analysis index such as E-energy and E-CO2 (Energy and CO2 emission) based on LCA method. Finally, a few potential opportunities and development directions have been suggested for future research on geopolymer materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Geopolymers: Inorganic polymeric new materials
Davidovits, J. (1991) · Journal of Thermal Analysis · doi:10.1007/bf01912193 · Cited by 4,251
Thermal Conductivity of Heterogeneous Two-Component Systems
Hamilton, R. L., & Crosser, O. K. (1962) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160003a005 · Cited by 3,672
Provis, J. L. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.009 · Cited by 2,272
The role of inorganic polymer technology in the development of ‘green concrete’
Duxson, P., Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.08.018 · Cited by 1,998
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
The geopolymerisation of alumino-silicate minerals
Xu, H., & Van Deventer, J. S. J. (2000) · International Journal of Mineral Processing · doi:10.1016/s0301-7516(99)00074-5 · Cited by 1,876
Duxson, P., Provis, J. L., Lukey, G. C., Mallicoat, S. W., Kriven, W. M., & van Deventer, J. S. J. (2005) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2005.06.060 · Cited by 1,807
Geopolymer Chemistry and Applications
Davidovits, J. (2008) · CERN Document Server (European Organization for Nuclear Research) · Cited by 1,692
Geopolymer concrete: A review of some recent developments
Singh, B., Ishwarya, G., Gupta, M., & Bhattacharyya, S. K. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.03.036 · Cited by 1,484
Mechanism of geopolymerization and factors influencing its development: a review
Khale, D., & Chaudhary, R. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0401-4 · Cited by 1,463
Habert, G., d’Espinose de Lacaillerie, J. B., & Roussel, N. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.03.012 · Cited by 1,407
Garcia-Lodeiro, I., Palomo, A., Fernández-Jiménez, A., & Macphee, D. E. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.05.006 · Cited by 1,366
Geopolymers and geopolymeric materials
Davidovits, J. (1989) · Journal of Thermal Analysis · doi:10.1007/bf01904446 · Cited by 1,148
Composition and microstructure of alkali activated fly ash binder: Effect of the activator
Fernández-Jiménez, A., & Palomo, A. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2005.03.003 · Cited by 1,144
Barbosa, V. F. F., MacKenzie, K. J. D., & Thaumaturgo, C. (2000) · International Journal of Inorganic Materials · doi:10.1016/s1466-6049(00)00041-6 · Cited by 1,128
Alkali Activated Materials: State-of-the-Art Report, RILEM TC 224-AAM
(2014) · RILEM State-of-the-Art Reports · doi:10.1007/978-94-007-7672-2 · Cited by 906
Clean production and properties of geopolymer concrete; A review
Amran, Y. H. M., Alyousef, R., Alabduljabbar, H., & El-Zeadani, M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119679 · Cited by 901
Geopolymers as an alternative to Portland cement: An overview
Singh, N. B., & Middendorf, B. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117455 · Cited by 817
Measuring the eco-efficiency of cement use
Damineli, B. L., Kemeid, F. M., Aguiar, P. S., & John, V. M. (2010) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2010.07.009 · Cited by 776
Chen, C., Habert, G., Bouzidi, Y., & Jullien, A. (2010) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2009.12.014 · Cited by 718
Factors affecting the strength of alkali-activated slag
Wang, S.-D., Scrivener, K. L., & Pratt, P. L. (1994) · Cement and Concrete Research · doi:10.1016/0008-8846(94)90026-4 · Cited by 716
A new approach to modelling the effective thermal conductivity of heterogeneous materials
Wang, J., Carson, J. K., North, M. F., & Cleland, D. J. (2006) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2006.02.007 · Cited by 690
Fiber-reinforced geopolymer composites: A review
Ranjbar, N., & Zhang, M. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.103498 · Cited by 651
Hassan, A., Arif, M., & Shariq, M. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.03.051 · Cited by 639
Durability evaluation of geopolymer and conventional concretes
Albitar, M., Mohamed Ali, M. S., Visintin, P., & Drechsler, M. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.01.056 · Cited by 629
Measurement of tensile bond strength of 3D printed geopolymer mortar
Panda, B., Paul, S. C., Mohamed, N. A. N., Tay, Y. W. D., & Tan, M. J. (2018) · Measurement · doi:10.1016/j.measurement.2017.08.051 · Cited by 592
Resistance of alkali-activated slag concrete to acid attack
Bakharev, T., Sanjayan, J. G., & Cheng, Y.-B. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00125-x · Cited by 586
Damage behavior of geopolymer composites exposed to elevated temperatures
Kong, D. L. Y., & Sanjayan, J. G. (2008) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2008.08.001 · Cited by 581
Fang, G., Ho, W. K., Tu, W., & Zhang, M. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.04.008 · Cited by 528
Panda, B., & Tan, M. J. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.03.031 · Cited by 520
Workability and strength of lignite bottom ash geopolymer mortar
Sathonsaowaphak, A., Chindaprasirt, P., & Pimraksa, K. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.01.120 · Cited by 507
Marchon, D., Kawashima, S., Bessaies-Bey, H., Mantellato, S., & Ng, S. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.014 · Cited by 507
A review on alkaline activation: New analytical perspectives
Palomo, A., Krivenko, P., Garcia-Lodeiro, I., Kavalerova, E., Maltseva, O., & Fernández-Jiménez, A. (2014) · Materiales de Construcción · doi:10.3989/mc.2014.00314 · Cited by 501
Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing
Panda, B., Unluer, C., & Tan, M. J. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.10.002 · Cited by 482
Sulfate attack on alkali-activated slag concrete
Bakharev, T., Sanjayan, J. G., & Cheng, Y.-B. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00659-7 · Cited by 456
A critical review of geopolymer properties for structural fire-resistance applications
Lahoti, M., Tan, K. H., & Yang, E.-H. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.06.076 · Cited by 431
Yang, T., Zhu, H., Zhang, Z., Gao, X., Zhang, C., & Wu, Q. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.008 · Cited by 399
Processing, properties and applications of highly porous geopolymers: A review
Bai, C., & Colombo, P. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.05.219 · Cited by 391
Mechanisms of interfacial bond in steel and polypropylene fiber reinforced geopolymer composites
Ranjbar, N., Talebian, S., Mehrali, M., Kuenzel, C., Metselaar, H. S. C., & Jumaat, M. Z. (2015) · Composites Science and Technology · doi:10.1016/j.compscitech.2015.11.009 · Cited by 390
Microanalysis of calcium silicate hydrate gel formed within a geopolymeric binder
Yip, C. K., & van Deventer, J. S. J. (2003) · Journal of Materials Science · doi:10.1023/a:1025904905176 · Cited by 365
Palacios, M., & Puertas, F. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.10.014 · Cited by 364
Xiao, R., Ma, Y., Jiang, X., Zhang, M., Zhang, Y., Wang, Y., Huang, B., & He, Q. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119610 · Cited by 359
Life cycle assessment of geopolymer concrete
Salas, D. A., Ramirez, A. D., Ulloa, N., Baykara, H., & Boero, A. J. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.09.123 · Cited by 347
Graphene nanoplatelet-fly ash based geopolymer composites
Ranjbar, N., Mehrali, M., Mehrali, M., Alengaram, U. J., & Jumaat, M. Z. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.06.003 · Cited by 341
A study on the setting characteristics of sodium silicate-activated slag pastes
Chang, J. J. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)01096-7 · Cited by 330
Aliabdo, A. A., Abd Elmoaty, A. E. M., & Salem, H. A. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.06.062 · Cited by 329
Eco-friendly geopolymer prepared from solid wastes: A critical review
Ren, B., Zhao, Y., Bai, H., Kang, S., Zhang, T., & Song, S. (2020) · Chemosphere · doi:10.1016/j.chemosphere.2020.128900 · Cited by 326
Fresh and hardened properties of alkali-activated fly ash/slag pastes with superplasticizers
Jang, J. G., Lee, N. K., & Lee, H. K. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.09.048 · Cited by 318
AL-MASHHADANI, M. M. M., Canpolat, O., Aygörmez, Y., Uysal, M., & Erdem, S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.02.061 · Cited by 307
Mechanical and microstructural properties of heat cured alkali-activated slag mortars
Aydın, S., & Baradan, B. (2011) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2011.10.005 · Cited by 305
Zhang, H., Kodur, V. K. R., Wu, B., Cao, L., & Wang, F. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.01.043 · Cited by 305
Geopolymer foams: An overview of recent advancements
Novais, R. M., Pullar, R. C., & Labrincha, J. A. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100621 · Cited by 303
Puertas, F., Varga, C., & Alonso, M. M. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.07.012 · Cited by 298
Phair, J. W., & Van Deventer, J. S. J. (2002) · International Journal of Mineral Processing · doi:10.1016/s0301-7516(02)00013-3 · Cited by 295
Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing
Panda, B., Unluer, C., & Tan, M. J. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107290 · Cited by 285
Effect of temperature on the hydration of Portland cement blended with siliceous fly ash
Deschner, F., Lothenbach, B., Winnefeld, F., & Neubauer, J. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.07.006 · Cited by 283
Noushini, A., Aslani, F., Castel, A., Gilbert, R. I., Uy, B., & Foster, S. J. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.07.004 · Cited by 259
One-Part Geopolymer Mixes from Geothermal Silica and Sodium Aluminate
Hajimohammadi, A., Provis, J. L., & van Deventer, J. S. J. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie8006825 · Cited by 239
Mechanical properties and mechanisms of fiber reinforced fly ash–steel slag based geopolymer mortar
Guo, X., & Pan, X. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.05.198 · Cited by 239
Li, Z., Li, W., & Ma, G. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.107796 · Cited by 233
Alghamdi, H., Nair, S. A. O., & Neithalath, N. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107634 · Cited by 227
Mechanical properties of layered geopolymer structures applicable in concrete 3D-printing
Al-Qutaifi, S., Nazari, A., & Bagheri, A. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.04.195 · Cited by 218
Jiang, X., Zhang, Y., Xiao, R., Polaczyk, P., Zhang, M., Hu, W., Bai, Y., & Huang, B. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.122500 · Cited by 215
Ren, D., Yan, C., Duan, P., Zhang, Z., Li, L., & Yan, Z. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.12.103 · Cited by 214
Rheology of fly ash-based geopolymer: Effect of NaOH concentration
Rifaai, Y., Yahia, A., Mostafa, A., Aggoun, S., & Kadri, E.-H. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.07.028 · Cited by 211
Sodium silicate-based alkali-activated slag mortars
Brough, A. R., Holloway, M., Sykes, J., & Atkinson, A. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00356-2 · Cited by 208
Setting time and 7-day strength of geopolymer mortar with various binders
Elyamany, H. E., Abd Elmoaty, A. E. M., & Elshaboury, A. M. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.08.025 · Cited by 207
Investigation of early compressive strength of fly ash-based geopolymer concrete
Assi, L. N., Deaver, E. (., ElBatanouny, M. K., & Ziehl, P. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.03.008 · Cited by 203
Effects of Alkaline Solution on Properties of the HCFA Geopolymer Mortars
Malkawi, A. B., Nuruddin, M. F., Fauzi, A., Almattarneh, H., & Mohammed, B. S. (2016) · Procedia Engineering · doi:10.1016/j.proeng.2016.06.581 · Cited by 202
Xia, M., Nematollahi, B., & Sanjayan, J. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.01.013 · Cited by 202
Early Age Properties of Low-calcium Fly Ash Geopolymer Concrete Suitable for Ambient Curing
Nath, P., Sarker, P. K., & Rangan, V. B. (2015) · Procedia Engineering · doi:10.1016/j.proeng.2015.11.077 · Cited by 198
Micro-cable reinforced geopolymer composite for extrusion-based 3D printing
Ma, G., Li, Z., Wang, L., & Bai, G. (2019) · Materials Letters · doi:10.1016/j.matlet.2018.09.159 · Cited by 196
Ravikumar, D., & Neithalath, N. (2012) · Thermochimica Acta · doi:10.1016/j.tca.2012.07.010 · Cited by 191
Characterization of alkali activated geopolymer mortar doped with MWCNT
Khater, H. M., & Abd el Gawaad, H. A. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.121 · Cited by 187
Utilization of volcanic ashes for the production of geopolymers cured at ambient temperature
Tchakoute, H. K., Elimbi, A., Yanne, E., & Djangang, C. N. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2013.03.010 · Cited by 186
Pore characteristics in one-part mix geopolymers foamed by H 2 O 2 : The impact of mix design
Hajimohammadi, A., Ngo, T., Mendis, P., Nguyen, T., Kashani, A., & van Deventer, J. S. J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.05.084 · Cited by 181
Hardening evolution of geopolymers from setting to equilibrium: A review
Ranjbar, N., Kuenzel, C., Spangenberg, J., & Mehrali, M. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103729 · Cited by 181
Barbosa, T. R., Foletto, E. L., Dotto, G. L., & Jahn, S. L. (2018) · Ceramics International · doi:10.1016/j.ceramint.2017.09.193 · Cited by 179
The Effect of Temperature and Duration of Curing on the Strength of Fly Ash Based Geopolymer Mortar
Adam, A. A., & Horianto, X. X. X. (2014) · Procedia Engineering · doi:10.1016/j.proeng.2014.12.199 · Cited by 178
Chougan, M., Hamidreza Ghaffar, S., Jahanzat, M., Albar, A., Mujaddedi, N., & Swash, R. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118928 · Cited by 175
Bai, C., Ni, T., Wang, Q., Li, H., & Colombo, P. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.09.021 · Cited by 163
Sandanayake, M., Gunasekara, C., Law, D., Zhang, G., Setunge, S., & Wanijuru, D. (2020) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2020.e00178 · Cited by 163
The study of the structure rebuilding and yield stress of 3D printing geopolymer pastes
Zhang, D., Wang, D., Lin, X., & Zhang, T. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.06.233 · Cited by 155
Tchakouté, H. K., Rüscher, C. H., Kong, S., & Ranjbar, N. (2016) · Journal of Building Engineering · doi:10.1016/j.jobe.2016.04.007 · Cited by 154
Dissolution mechanism of fly ash to quantify the reactive aluminosilicates in geopolymerisation
Kuenzel, C., & Ranjbar, N. (2019) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2019.104421 · Cited by 154
Sustainable one-part geopolymer foams with glass fines versus sand as aggregates
Hajimohammadi, A., Ngo, T., & Kashani, A. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.03.120 · Cited by 149
Synthesis of mesoporous geopolymers containing zeolite phases by a hydrothermal treatment
Lee, N. K., Khalid, H. R., & Lee, H. (2016) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2016.04.016 · Cited by 142
Garg, N., & White, C. E. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00412e · Cited by 138
Ranjbar, N., Mehrali, M., Maheri, M. R., & Mehrali, M. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.05.010 · Cited by 138
Djobo, J. N. Y., Elimbi, A., Tchakouté, H. K., & Kumar, S. (2016) · Journal of Materials Science · doi:10.1007/s10853-016-0257-1 · Cited by 135
Development of a high strength fly ash-based geopolymer in short time by using microwave curing
Graytee, A., Sanjayan, J., & Nazari, A. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.02.001 · Cited by 134
Synthesis of geopolymer-supported zeolites via robust one-step method and their adsorption potential
Khalid, H. R., Lee, N. K., Park, S., Abbas, N., & Lee, H. K. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2018.04.049 · Cited by 131
Effect of foaming gas and cement type on the thermal conductivity of foamed concrete
Li, T., Huang, F., Jiang, Z., Tang, J., & Liu, J. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117197 · Cited by 131
Yuan, J., He, P., Jia, D., Yang, C., Zhang, Y., Yan, S. M., Yang, Z., Duan, X., Wang, S., & Zhou, Y. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.07.139 · Cited by 130
Xie, J., & Kayali, O. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.06.067 · Cited by 128
Environmentally Driven Geopolymer Cement Applications.
Davidovits, J. (2002) · Cited by 127
Cui, Y., Wang, D., Zhao, J., Li, D., Ng, S., & Rui, Y. (2018) · Journal of Building Engineering · doi:10.1016/j.jobe.2018.06.002 · Cited by 125
Self-citationZhang, D., Wang, D., Liu, Z., & Xie, F.-Z. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.07.205 · Cited by 123
Risk of early age cracking in geopolymer concrete due to restrained shrinkage
Khan, I., Xu, T., Castel, A., Gilbert, R. I., & Babaee, M. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.116840 · Cited by 122
Kastiukas, G., Ruan, S., Liang, S., & Zhou, X. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120290 · Cited by 122
Effect of phosphate on the hydration of alkali-activated red mud–slag cementitious material
Gong, C., & Yang, N. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00260-x · Cited by 120
Wang, M., Jia, D., He, P., & Zhou, Y. (2011) · Ceramics International · doi:10.1016/j.ceramint.2011.02.010 · Cited by 116
Velandia, D. F., Lynsdale, C. J., Provis, J. L., Ramírez, F., & Gomez, A. C. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.10.076 · Cited by 116
Zribi, M., Samet, B., & Baklouti, S. (2019) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2019.01.032 · Cited by 115
Sun, C., Xiang, J., Xu, M., He, Y., Tong, Z., & Cui, X. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120986 · Cited by 111
Korat, L., & Ducman, V. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.03.010 · Cited by 110
Ekinci, E., Türkmen, İ., Kantarcı, F., & Karakoç, M. B. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.12.204 · Cited by 110
Estimation of reaction kinetics of geopolymers at early ages
Hu, Z., Wyrzykowski, M., & Lura, P. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.105971 · Cited by 108
Suwan, T., & Fan, M. (2016) · Materials and Manufacturing Processes · doi:10.1080/10426914.2016.1198013 · Cited by 103
Kamseu, E., Ngouloure, Z. N. M., Naït‐Ali, B., Zekeng, S. S., Melo, U. C., Rossignol, S., & Leonelli, C. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.11.066 · Cited by 99
Effects of heat and pressure on hot-pressed geopolymer
Ranjbar, N., Kashefi, A., Ye, G., & Mehrali, M. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117106 · Cited by 89
Development of Sucrose and Citric Acid as the Natural based Admixture for Fly Ash based Geopolymer
Kusbiantoro, A., Ibrahim, M. S., Muthusamy, K., & Alias, A. (2013) · Procedia Environmental Sciences · doi:10.1016/j.proenv.2013.02.075 · Cited by 85
Hot-pressed geopolymer: Dual effects of heat and curing time
Ranjbar, N., Kashefi, A., & Maheri, M. R. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.11.004 · Cited by 83
Phavongkham, V., Wattanasiriwech, D., Cheng, T., & Wattanasiriwech, D. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118282 · Cited by 77
Effect of Organic Polymers on the Properties of Slag-based Geopolymers
Chen, X., Zhu, G., Zhou, M., Wang, J., & Chen, Q. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.02.031 · Cited by 72
Characterization of alkali activated geopolymer mortar doped with MWCNT
Khater, H. M. M., & Abdel‐Gawwad, H. A. (2015) · Epitoanyag-Journal of Silicate Based and Composite Materials · doi:10.14382/epitoanyag-jsbcm.2015.7 · Cited by 71
Sturm, P., Greiser, S., Gluth, G. J. G., Jäger, C., & Brouwers, H. J. H. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-9232-5 · Cited by 70
Salami, B. A., Johari, M. A. M., Ahmad, Z. A., & Maslehuddin, M. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.01.033 · Cited by 69
Suitability of heat-cured low-calcium fly ash-based geopolymer concrete for precast applications
Noushini, A., Babaee, M., & Castel, A. (2015) · Magazine of Concrete Research · doi:10.1680/macr.15.00065 · Cited by 63
Ali, A. Z. M., Sanjayan, J., & Guerrieri, M. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.01.099 · Cited by 57
Yan, S. M., Zhang, F., Wang, S., He, P., Jia, D., & Yang, J. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.103376 · Cited by 46
Fu, S., He, P., Wang, M., Wang, M., Wang, R., Yuan, J., Jia, D., & Cui, J. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.08.036 · Cited by 43
Influence of preheating of fly ash precursors to produce geopolymers
Ranjbar, N., & Kuenzel, C. (2017) · Journal of the American Ceramic Society · doi:10.1111/jace.14848 · Cited by 40
Rheology and agglomerate structure of fresh geopolymer pastes with different Ms ratio of waterglass
Zhang, D., Zhao, K., Xie, F.-Z., et al. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118881 · Cited by 37
Ji, X., Zhang, H., Bai, Z., Qiu, G., Guo, M., Cheng, F., & Zhang, M. (2019) · Energy and Buildings · doi:10.1016/j.enbuild.2019.109533 · Cited by 26
Cited by
Low-CO2 emission strategies to achieve net zero target in cement sector
Supriya, Chaudhury, R., Sharma, U., Thapliyal, P. C., & Singh, L. P. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.137466 · Cited by 576
Shehata, N., Mohamed, O. A., Sayed, E. T., Abdelkareem, M. A., & Olabi, A. G. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2022.155577 · Cited by 371
Wang, T., Ju, F., Xiao, M., Wang, D., Yin, L., Si, L., Wang, Y., Xu, M., & Yang, D. (2025) · Materials · doi:10.3390/ma18174189 · Cited by 11
Metadata
- Authors
- Zhao, J., Tong, L., Li, B., Chen, T., Wang, C., Yang, G., & Zheng, Y.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2021-07
- Volume
- 307
- Pages
- 127085
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W3159848840
- Cited by
- 369
- References
- 126
- FWCI
- 26.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.