The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Designing a Quinone-Based Redox Mediator to Facilitate Li2S Oxidation in Li-S Batteries
Open accessAbstract
Summary In lithium-sulfur (Li-S) batteries, the insulating nature of sulfur and lithium sulfide (Li2S) results in large polarization and low sulfur utilization while the soluble polysulfides lead to internal shuttle upon cycling. Furthermore, the redox reaction via the dissolution-precipitation route destroys the electrode architecture by passivating the active interface responsible for the redox reaction, and thus the performance deteriorates with cycling. Here, we employ the redox chemistry of quinone to realize efficient, fast, and stable operation of Li-S batteries using Li2S microparticles. By adding a quinone derivative with tailored properties (e.g., oxidation potential, solubility, and electrochemical stability) to an electrolyte as a redox mediator (RM), initial charging of Li2S electrodes occurs below 2.5 V at 0.5C, and the subsequent discharge capacity is as high as 1,300 mAh gs−1. Moreover, deposition of dead Li2S, which was the primary cause of increasing polarization and decreasing capacity upon cycling, is effectively prevented with the RM.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479 · cited 1×
“Lithium-sulfur (Li-S) batteries are a sustainable and cost-effective solution for nextgeneration energy storage to support renewable energy integration due to the natural abundance of sulfur.(1,2) Li-S batteries can theoretically store an energy density of 2,500 Wh kg (1), a 5-fold increase compared to traditional lit…”
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Self-citationAdvances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
A highly efficient polysulfide mediator for lithium–sulfur batteries
Liang, X., Hart, C., Pang, Q., Garsuch, A., Weiss, T., & Nazar, L. F. (2015) · Nature Communications · doi:10.1038/ncomms6682 · Cited by 2,062
Powering Lithium–Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts
Yuan, Z., Peng, H.-J., Hou, T.-Z., Huang, J.-Q., Chen, C.-M., Wang, D.-W., Cheng, X.-B., Wei, F., & Zhang, Q. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04166 · Cited by 1,438
Tao, X., Wang, J., Liu, C., Wang, H., Yao, H., Zheng, G., Seh, Z. W., Cai, Q., Li, W., Zhou, G., et al. (2016) · Nature Communications · doi:10.1038/ncomms11203 · Cited by 1,391
Self-citationPang, Q., Kundu, D., Cuisinier, M., & Nazar, L. F. (2014) · Nature Communications · doi:10.1038/ncomms5759 · Cited by 1,318
Catalytic oxidation of Li 2 S on the surface of metal sulfides for Li−S batteries
Zhou, G., Tian, H., Jin, Y., Tao, X., Liu, B., Zhang, R., Seh, Z. W., Zhuo, D., Liu, Y., Sun, J., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1615837114 · Cited by 1,278
Self-citationSustainability and in situ monitoring in battery development
Grey, C. P., & Tarascon, J. M. (2017) · Nature Materials · doi:10.1038/nmat4777 · Cited by 1,213
Sulfur Cathodes Based on Conductive MXene Nanosheets for High‐Performance Lithium–Sulfur Batteries
Liang, X., Garsuch, A., & Nazar, L. F. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410174 · Cited by 1,201
Sun, Z., Zhang, J., Yin, L., Hu, G., Fang, R., Cheng, H.-M., & Li, F. (2017) · Nature Communications · doi:10.1038/ncomms14627 · Cited by 1,135
Lithium sulfur batteries, a mechanistic review
Wild, M., O'Neill, L., Zhang, T., Purkayastha, R., Minton, G., Marinescu, M., & Offer, G. J. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01388g · Cited by 1,107
Mechanism and Kinetics of Li2S Precipitation in Lithium–Sulfur Batteries
Fan, F. Y., Carter, W. C., & Chiang, Y. (2015) · Advanced Materials · doi:10.1002/adma.201501559 · Cited by 987
Zheng, J., Tian, J., Wu, D., Gu, M., Xu, W., Wang, C., Gao, F., Engelhard, M. H., Zhang, J.-G., Liu, J., et al. (2014) · Nano Letters · doi:10.1021/nl404721h · Cited by 719
Yang, Y., Zheng, G., Misra, S., Nelson, J., Toney, M. F., & Cui, Y. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3052206 · Cited by 718
Self-citationCycling Li-O 2 batteries via LiOH formation and decomposition
Liu, T., Leskes, M., Yu, W., Moore, A. J., Zhou, L., Bayley, P. M., Kim, G., & Grey, C. P. (2015) · Science · doi:10.1126/science.aac7730 · Cited by 652
Cathode Composites for Li–S Batteries via the Use of Oxygenated Porous Architectures
Demir-Cakan, R., Morcrette, M., Nouar, F., Davoisne, C., Devic, T., Gonbeau, D., Dominko, R., Serre, C., Férey, G., & Tarascon, J.-M. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2062659 · Cited by 630
Mesoporous Titanium Nitride‐Enabled Highly Stable Lithium‐Sulfur Batteries
Cui, Z., Zu, C., Zhou, W., Manthiram, A., & Goodenough, J. B. (2016) · Advanced Materials · doi:10.1002/adma.201601382 · Cited by 611
Seh, Z. W., Yu, J. H., Li, W., Hsu, P.-C., Wang, H., Sun, Y., Yao, H., Zhang, Q., & Cui, Y. (2014) · Nature Communications · doi:10.1038/ncomms6017 · Cited by 600
Self-citationProgress on the Critical Parameters for Lithium–Sulfur Batteries to be Practically Viable
Chung, S., Chang, C., & Manthiram, A. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801188 · Cited by 477
Burning lithium in CS2 for high-performing compact Li2S–graphene nanocapsules for Li–S batteries
Tan, G., Xu, R., Xing, Z., Yuan, Y., Lu, J., Wen, J., Liu, C., Ma, L., Zhan, C., Liu, Q., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.90 · Cited by 444
A Long-Life, High-Rate Lithium/Sulfur Cell: A Multifaceted Approach to Enhancing Cell Performance
Song, M.-K., Zhang, Y., & Cairns, E. J. (2013) · Nano Letters · doi:10.1021/nl402793z · Cited by 427
A graphene-like metallic cathode host for long-life and high-loading lithium–sulfur batteries
Pang, Q., Kundu, D., & Nazar, L. F. (2016) · Materials Horizons · doi:10.1039/c5mh00246j · Cited by 424
Pang, Q., & Nazar, L. F. (2016) · ACS Nano · doi:10.1021/acsnano.5b07347 · Cited by 411
Pan, H., Chen, J., Cao, R., Murugesan, V., Rajput, N. N., Han, K. S., Persson, K., Estevez, L., Engelhard, M. H., Zhang, J.-G., et al. (2017) · Nature Energy · doi:10.1038/s41560-017-0005-z · Cited by 402
Self-citationYao, H., Zheng, G., Hsu, P.-C., Kong, D., Cha, J. J., Li, W., Seh, Z. W., McDowell, M. T., Yan, K., Liang, Z., et al. (2014) · Nature Communications · doi:10.1038/ncomms4943 · Cited by 398
Self-citationRational design of redox mediators for advanced Li–O2 batteries
Lim, H.-D., Lee, B., Zheng, Y., Hong, J., Kim, J., Gwon, H., Ko, Y., Lee, M., Cho, K., & Kang, K. (2016) · Nature Energy · doi:10.1038/nenergy.2016.66 · Cited by 393
Self-citationZhang, Z., Peng, H., Zhao, M., & Huang, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707536 · Cited by 357
Wu, F., Lee, J. T., Nitta, N., Kim, H., Borodin, O., & Yushin, G. (2015) · Advanced Materials · doi:10.1002/adma.201404194 · Cited by 352
Redox Mediators for Li–O2 Batteries: Status and Perspectives
Park, J., Lee, S. H., Jung, H., Aurbach, D., & Sun, Y. (2018) · Advanced Materials · doi:10.1002/adma.201704162 · Cited by 350
Self-citationLithium–Sulfur Battery Cathode Enabled by Lithium–Nitrile Interaction
Guo, J., Yang, Z., Yu, Y., Abruña, H. D., & Archer, L. A. (2013) · Journal of the American Chemical Society · doi:10.1021/ja309435f · Cited by 343
Facile synthesis of Li2S–polypyrrole composite structures for high-performance Li2S cathodes
Seh, Z. W., Wang, H., Hsu, P.-C., Zhang, Q., Li, W., Zheng, G., Yao, H., & Cui, Y. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43395a · Cited by 311
Self-citationRecent Advances in Lithium Sulfide Cathode Materials and Their Use in Lithium Sulfur Batteries
Son, Y., Lee, J., Son, Y., Jang, J., & Cho, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500110 · Cited by 283
Li, G., Wang, X., Seo, M. H., Li, M., Ma, L., Yuan, Y., Wu, T., Yu, A., Wang, S., Lu, J., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-03116-z · Cited by 267
Yu, X., & Manthiram, A. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00460 · Cited by 209
Designing Lithium-Sulfur Cells with Practically Necessary Parameters
Chung, S.-H., & Manthiram, A. (2018) · Joule · doi:10.1016/j.joule.2018.01.002 · Cited by 184
Dong, Y., Li, S., Zhao, K., Han, C., Chen, W., Wang, B., Wang, L., Xu, B., Wei, Q., Zhang, L., et al. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00036j · Cited by 173
Self-citationLang, S.-Y., Xiao, R.-J., Gu, L., Guo, Y.-G., Wen, R., & Wan, L.-J. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b02057 · Cited by 168
Lithium Sulfide/Metal Nanocomposite as a High‐Capacity Cathode Prelithiation Material
Sun, Y., Lee, H., Seh, Z. W., Zheng, G. W., Sun, J., Li, Y., & Cui, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600154 · Cited by 126
Self-citationLi2S-reduced graphene oxide nanocomposites as cathode material for lithium sulfur batteries
Han, K., Shen, J., Hayner, C. M., Ye, H., Kung, M. C., & Kung, H. H. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.062 · Cited by 106
Jin, Y., Zhou, G., Shi, F., Zhuo, D., Zhao, J., Liu, K., Liu, Y., Zu, C., Chen, W., Zhang, R., et al. (2017) · Nature Communications · doi:10.1038/s41467-017-00537-0 · Cited by 60
Self-citation
Cited by
Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
Chen, Y., Wang, T., Tian, H., Su, D., Zhang, Q., & Wang, G. (2021) · Advanced Materials · doi:10.1002/adma.202003666 · Cited by 870
A Perspective toward Practical Lithium–Sulfur Batteries
Zhao, M., Li, B.-Q., Zhang, X.-Q., Huang, J.-Q., & Zhang, Q. (2020) · ACS Central Science · doi:10.1021/acscentsci.0c00449 · Cited by 858
Visualizing interfacial collective reaction behaviour of Li–S batteries
Zhou, S., Shi, J., Liu, S., Li, G., Pei, F., Chen, Y., Deng, J., Zheng, Q., Li, J., Zhao, C., et al. (2023) · Nature · doi:10.1038/s41586-023-06326-8 · Cited by 577
Electrolyte solutions design for lithium-sulfur batteries
Liu, Y., Elias, Y., Meng, J., Aurbach, D., Zou, R., Xia, D., & Pang, Q. (2021) · Joule · doi:10.1016/j.joule.2021.06.009 · Cited by 534
Non-metallic charge carriers for aqueous batteries
Liang, G., Mo, F., Ji, X., & Zhi, C. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00241-4 · Cited by 461
Metadata
- Authors
- Tsao, Y., Lee, M., Miller, E. C., Gao, G., Park, J., Chen, S., Katsumata, T., Tran, H., Wang, L.-W., Toney, M. F., Cui, Y., & Bao, Z.
- Venue
- Joule
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 3
- Issue
- 3
- Pages
- 872-884
- ISSN
- 2542-4351 (ISSN-L)
- OpenAlex
- W2912148168
- Cited by
- 277
- References
- 42
- FWCI
- 12.69
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.