The DOI matches its Crossref record; 116 of the 116 references it cites were found in a registry or an index.
A review of safety strategies of a Li-ion battery
Abstract
Since the burst of sales of electric vehicles in the world market, there have been frequently reported fire accidents throughout the globe. These accidents have led into the demise of occupants and vehicles which demoralize end-users. Herein, an extensive review of the thermal hazards of Li-ion battery and effective safety strategies toward eradicating the danger of thermal runaway is elucidated. First, the mechanism of thermal runaway (TR) and its associated chain reactions such as the breakdown of SEI layer, a reaction between anode/electrolyte, breakdown of electrolyte, a reaction between electrodes, etc. which in turn, generates enormous heat energy and variety species of flammable gases, is explained. In pack level, the main concern is the propagation of TR to the adjacent batteries inside the module and between modules. The propagation events transmit thermic consequences to adjacent batteries and, finally, catastrophically damage the battery pack. Thus, to reduce the thermal hazard of Lithium-ion battery, adequate measures have been reviewed, such as usage of thermally protective separators, safety devices, flame retardants, passive cooling devices, and fire suppressants. To conclude, the main goal here is to provide a better understanding of the TR mechanism and safety strategies toward enhancing the safety of Lithium-ion battery.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal runaway mechanism of lithium ion battery for electric vehicles: A review
Feng, X., Ouyang, M., Liu, X., Lu, L., Xia, Y., & He, X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.05.013 · Cited by 4,182
Ageing mechanisms in lithium-ion batteries
Vetter, J., Novák, P., Wagner, M. R., Veit, C., Möller, K.-C., Besenhard, J. O., Winter, M., Wohlfahrt-Mehrens, M., Vogler, C., & Hammouche, A. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.01.006 · Cited by 3,987
Thermal runaway caused fire and explosion of lithium ion battery
Wang, Q., Ping, P., Zhao, X., Chu, G., Sun, J., & Chen, C. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.02.038 · Cited by 3,103
Review—SEI: Past, Present and Future
Peled, E., & Menkin, S. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1441707jes · Cited by 2,182
Arora, P., & Zhang, Z. (. (2004) · Chemical Reviews · doi:10.1021/cr020738u · Cited by 2,175
A review on electrolyte additives for lithium-ion batteries
Zhang, S. S. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.07.074 · Cited by 1,831
Materials for lithium-ion battery safety
Liu, K., Liu, Y., Lin, D., Pei, A., & Cui, Y. (2018) · Science Advances · doi:10.1126/sciadv.aas9820 · Cited by 1,625
A review of recent developments in membrane separators for rechargeable lithium-ion batteries
Lee, H., Yanilmaz, M., Toprakci, O., Fu, K., & Zhang, X. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01432d · Cited by 1,467
Abuse behavior of high-power, lithium-ion cells
Spotnitz, R., & Franklin, J. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00488-3 · Cited by 1,373
Battery thermal models for hybrid vehicle simulations
Pesaran, A. A. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00200-8 · Cited by 1,116
Dendritic growth mechanisms in lithium/polymer cells
Brissot, C., Rosso, M., Chazalviel, J.-N., & Lascaud, S. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00242-0 · Cited by 945
Fire-extinguishing organic electrolytes for safe batteries
Wang, J., Yamada, Y., Sodeyama, K., Watanabe, E., Takada, K., Tateyama, Y., & Yamada, A. (2017) · Nature Energy · doi:10.1038/s41560-017-0033-8 · Cited by 907
Comparison of different cooling methods for lithium ion battery cells
Chen, D., Jiang, J., Kim, G.-H., Yang, C., & Pesaran, A. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.10.015 · Cited by 817
Reciprocating air flow for Li-ion battery thermal management to improve temperature uniformity
Mahamud, R., & Park, C. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.02.076 · Cited by 787
A Review on Lithium-Ion Batteries Safety Issues: Existing Problems and Possible Solutions
Wen, J., Yu, Y., & Chen, C. (2012) · Materials Express · doi:10.1166/mex.2012.1075 · Cited by 754
Separator technologies for lithium-ion batteries
Huang, X. (2010) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-010-1264-9 · Cited by 738
Phosphorus-based Flame Retardancy Mechanisms—Old Hat or a Starting Point for Future Development?
Schartel, B. (2010) · Materials · doi:10.3390/ma3104710 · Cited by 701
Design of electrolyte solutions for Li and Li-ion batteries: a review
Aurbach, D., Talyosef, Y., Markovsky, B., Markevich, E., Zinigrad, E., Asraf, L., Gnanaraj, J. S., & Kim, H.-J. (2004) · Electrochimica Acta · doi:10.1016/j.electacta.2004.01.090 · Cited by 682
A review on battery thermal management in electric vehicle application
Xia, G., Cao, L., & Bi, G. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.09.046 · Cited by 641
Progress in electrolytes for rechargeable Li-based batteries and beyond
Li, Q., Chen, J., Fan, L., Kong, X., & Lu, Y. (2016) · Green Energy & Environment · doi:10.1016/j.gee.2016.04.006 · Cited by 569
Fan, L., Khodadadi, J. M., & Pesaran, A. A. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.050 · Cited by 534
Ruiz, V., Pfrang, A., Kriston, A., Omar, N., Van den Bossche, P., & Boon-Brett, L. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.195 · Cited by 534
An electrochemical-thermal coupled overcharge-to-thermal-runaway model for lithium ion battery
Ren, D., Feng, X., Lu, L., Ouyang, M., Zheng, S., Li, J., & He, X. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.08.035 · Cited by 506
A design of air flow configuration for cooling lithium ion battery in hybrid electric vehicles
Park, H. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.102 · Cited by 497
Wilke, S., Schweitzer, B., Khateeb, S., & Al-Hallaj, S. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.11.018 · Cited by 475
Yang, N., Zhang, X., Li, G., & Hua, D. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.01.049 · Cited by 467
A 3D thermal runaway propagation model for a large format lithium ion battery module
Feng, X., Lu, L., Ouyang, M., Li, J., & He, X. (2016) · Energy · doi:10.1016/j.energy.2016.08.094 · Cited by 466
Toxic fluoride gas emissions from lithium-ion battery fires
Larsson, F., Andersson, P., Blomqvist, P., & Mellander, B.-E. (2017) · Scientific Reports · doi:10.1038/s41598-017-09784-z · Cited by 462
Feng, X., He, X., Ouyang, M., Lu, L., Wu, P., Kulp, C., & Prasser, S. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.04.118 · Cited by 458
Thermal Stability Studies of Li‐Ion Cells and Components
Maleki, H., Deng, G., Anani, A., & Howard, J. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1392458 · Cited by 437
Electrospun polyimide nanofiber-based nonwoven separators for lithium-ion batteries
Miao, Y.-E., Zhu, G.-N., Hou, H., Xia, Y.-Y., & Liu, T. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.027 · Cited by 416
Karimi, G., & Li, X. (2013) · International Journal of Energy Research · doi:10.1002/er.1956 · Cited by 411
Li, H., Wu, D., Wu, J., Dong, L., Zhu, Y., & Hu, X. (2017) · Advanced Materials · doi:10.1002/adma.201703548 · Cited by 401
Experimental Analysis of Thermal Runaway and Propagation in Lithium-Ion Battery Modules
Lopez, C. F., Jeevarajan, J. A., & Mukherjee, P. P. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0921509jes · Cited by 386
Liu, K., Liu, W., Qiu, Y., Kong, B., Sun, Y., Chen, Z., Zhuo, D., Lin, D., & Cui, Y. (2017) · Science Advances · doi:10.1126/sciadv.1601978 · Cited by 354
Runaway risk of forming toxic compounds
Hammami, A., Raymond, N., & Armand, M. (2003) · Nature · doi:10.1038/424635b · Cited by 346
Li-Ion Battery Fire Hazards and Safety Strategies
Kong, L., Li, C., Jiang, J., & Pecht, M. G. (2018) · Energies · doi:10.3390/en11092191 · Cited by 343
Heat transfer in phase change materials for thermal management of electric vehicle battery modules
Duan, X., & Naterer, G. F. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.07.044 · Cited by 335
Parimalam, B. S., & Lucht, B. L. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0901802jes · Cited by 335
Zhao, R., Gu, J., & Liu, J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.007 · Cited by 332
State of the Art of Lithium-Ion Battery SOC Estimation for Electrical Vehicles
Zhang, R., Xia, B., Li, B., Cao, L., Lai, Y., Zheng, W., Wang, H., & Wang, W. (2018) · Energies · doi:10.3390/en11071820 · Cited by 321
Abuse by External Heating, Overcharge and Short Circuiting of Commercial Lithium-Ion Battery Cells
Larsson, F., & Mellander, B.-E. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0311410jes · Cited by 319
Gas generation mechanism due to electrolyte decomposition in commercial lithium-ion cell
Kumai, K., Miyashiro, H., Kobayashi, Y., Takei, K., & Ishikawa, R. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00234-1 · Cited by 317
Arora, S. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.08.020 · Cited by 315
Orsini, F., Du Pasquier, A., Beaudoin, B., Tarascon, J. M., Trentin, M., Langenhuizen, N., De Beer, E., & Notten, P. (1998) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00128-1 · Cited by 310
A Review on the Thermal Hazards of the Lithium-Ion Battery and the Corresponding Countermeasures
Ouyang, D., Chen, M., Huang, Q., Weng, J., Wang, Z., & Wang, J. (2019) · Applied Sciences · doi:10.3390/app9122483 · Cited by 306
Cho, W., Kim, S.-M., Song, J. H., Yim, T., Woo, S.-G., Lee, K.-W., Kim, J.-S., & Kim, Y.-J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.12.128 · Cited by 302
A consideration of lithium cell safety
Tobishima, S., & Yamaki, J. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00240-7 · Cited by 291
Gogoana, R., Pinson, M. B., Bazant, M. Z., & Sarma, S. E. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.101 · Cited by 283
Live Scanning Electron Microscope Observations of Dendritic Growth in Lithium/Polymer Cells
Dollé, M., Sannier, L., Beaudoin, B., Trentin, M., & Tarascon, J.-M. (2002) · Electrochemical and Solid-State Letters · doi:10.1149/1.1519970 · Cited by 278
Jeong, H.-S., & Lee, S.-Y. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.037 · Cited by 274
A review on lithium-ion power battery thermal management technologies and thermal safety
An, Z., Jia, L., Ding, Y., Dang, C., & Li, X. (2017) · Journal of Thermal Science · doi:10.1007/s11630-017-0955-2 · Cited by 274
A Study of the Physical Properties of Li-Ion Battery Electrolytes Containing Esters
Logan, E. R., Tonita, E. M., Gering, K. L., Li, J., Ma, X., Beaulieu, L. Y., & Dahn, J. R. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0271802jes · Cited by 264
Thermal Behavior of Lithiated Graphite with Electrolyte in Lithium-Ion Batteries
Wang, Q., Sun, J., Yao, X., & Chen, C. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2139955 · Cited by 259
Leising, R. A., Palazzo, M. J., Takeuchi, E. S., & Takeuchi, K. J. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1379740 · Cited by 253
Thermal stability of LiPF6/EC+DEC electrolyte with charged electrodes for lithium ion batteries
Wang, Q., Sun, J., Yao, X., & Chen, C. (2005) · Thermochimica Acta · doi:10.1016/j.tca.2005.06.010 · Cited by 246
The effect of thermal gradients on the performance of lithium-ion batteries
Troxler, Y., Wu, B., Marinescu, M., Yufit, V., Patel, Y., Marquis, A. J., Brandon, N. P., & Offer, G. J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.06.084 · Cited by 239
Research on the heat dissipation performance of battery pack based on forced air cooling
Xu, X. M., & He, R. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.004 · Cited by 237
Experimental performances of a battery thermal management system using a phase change material
Hémery, C.-V., Pra, F., Robin, J.-F., & Marty, P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.147 · Cited by 220
Greco, A., Jiang, X., & Cao, D. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.12.027 · Cited by 219
Identifying the Cause of Rupture of Li‐Ion Batteries during Thermal Runaway
Finegan, D. P., Darcy, E., Keyser, M., Tjaden, B., Heenan, T. M. M., Jervis, R., Bailey, J. J., Vo, N. T., Magdysyuk, O. V., Drakopoulos, M., et al. (2018) · Advanced Science · doi:10.1002/advs.201700369 · Cited by 207
Autonomic Shutdown of Lithium‐Ion Batteries Using Thermoresponsive Microspheres
Baginska, M., Blaiszik, B. J., Merriman, R. J., Sottos, N. R., Moore, J. S., & White, S. R. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100683 · Cited by 205
Investigation of a commercial lithium-ion battery under overcharge/over-discharge failure conditions
Ouyang, D., Chen, M., Liu, J., Wei, R., Weng, J., & Wang, J. (2018) · RSC Advances · doi:10.1039/c8ra05564e · Cited by 196
Giuliano, M. R., Prasad, A. K., & Advani, S. G. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.05.074 · Cited by 194
Gas evolution behaviors for several cathode materials in lithium-ion batteries
Kong, W., Li, H., Huang, X., & Chen, L. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.10.008 · Cited by 193
Tran, T.-H., Harmand, S., & Sahut, B. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.04.130 · Cited by 191
Dendrite-separator interactions in lithium-based batteries
Jana, A., Ely, D. R., & García, R. E. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.056 · Cited by 184
An Online SOC and SOH Estimation Model for Lithium-Ion Batteries
Huang, S.-C., Tseng, K.-H., Liang, J.-W., Chang, C.-L., & Pecht, M. (2017) · Energies · doi:10.3390/en10040512 · Cited by 181
Liu, L., Park, J., Lin, X., Sastry, A. M., & Lu, W. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.06.050 · Cited by 180
Study of the fire hazards of lithium-ion batteries at different pressures
Chen, M., Liu, J., He, Y., Yuen, R. K. K., & Wang, J. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.06.131 · Cited by 178
Lei, B., Zhao, W., Ziebert, C., Uhlmann, N., Rohde, M., & Seifert, H. (2017) · Batteries · doi:10.3390/batteries3020014 · Cited by 176
Coman, P. T., Darcy, E. C., Veje, C. T., & White, R. E. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.06.033 · Cited by 175
Chemical Overcharge and Overdischarge Protection for Lithium-Ion Batteries
Chen, J., Buhrmester, C., & Dahn, J. R. (2005) · Electrochemical and Solid-State Letters · doi:10.1149/1.1836119 · Cited by 171
Mohammadian, S. K., He, Y., & Zhang, Y. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.05.055 · Cited by 165
Robinson, J. B., Darr, J. A., Eastwood, D. S., Hinds, G., Lee, P. D., Shearing, P. R., Taiwo, O. O., & Brett, D. J. L. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.059 · Cited by 164
Thermal management of batteries employing active temperature control and reciprocating cooling flow
He, F., & Ma, L. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.11.079 · Cited by 146
Characterization of thermal cut-off mechanisms in prismatic lithium-ion batteries
Venugopal, G. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00782-0 · Cited by 142
Wang, Q., Shao, G., Duan, Q., Chen, M., Li, Y., Wu, K., Liu, B., Peng, P., & Sun, J. (2015) · Fire Technology · doi:10.1007/s10694-015-0531-9 · Cited by 138
State-of-Charge Estimation for Li-Ion Batteries: A More Accurate Hybrid Approach
Misyris, G. S., Doukas, D. I., Papadopoulos, T. A., Labridis, D. P., & Agelidis, V. G. (2018) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2018.2861994 · Cited by 138
Vehicle Battery Safety Roadmap Guidance
USDOE Office of Energy Efficiency and Renewable Energy (EERE), O. O. S. T. V. T. O. (., & Doughty, D. H. (2012) · doi:10.2172/1055366 · Cited by 137
Roth, E. P., Doughty, D. H., & Franklin, J. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.03.074 · Cited by 134
100 Wh Large size Li-ion batteries and safety tests
Kitoh, K., & Nemoto, H. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00125-1 · Cited by 131
Zhang, L., Zhang, Z., Redfern, P. C., Curtiss, L. A., & Amine, K. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21977h · Cited by 129
Buhrmester, C., Moshurchak, L., Wang, R. L., & Dahn, J. R. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2140615 · Cited by 125
Xu, K., Zhang, S. S., Allen, J. L., & Jow, T. R. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1533041 · Cited by 124
Temperature-sensitive cathode materials for safer lithium-ion batteries
Xia, L., Li, S., Ai, X., Yang, H., & Cao, Y. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00590h · Cited by 107
Coleman, B., Ostanek, J. K., & Heinzel, J. M. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.07.094 · Cited by 105
Spinner, N. S., Field, C. R., Hammond, M. H., Williams, B. A., Myers, K. M., Lubrano, A. L., Rose‐Pehrsson, S. L., & Tuttle, S. G. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.01.068 · Cited by 104
Gallardo-Lozano, J., Romero‐Cadaval, E., Milanés‐Montero, M. I., & Guerrero-Martinez, M. A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.09.005 · Cited by 103
Investigation into the Fire Hazards of Lithium-Ion Batteries under Overcharging
Ouyang, D., Liu, J., Chen, M., & Wang, J. (2017) · Applied Sciences · doi:10.3390/app7121314 · Cited by 99
Building thermally stable Li-ion batteries using a temperature-responsive cathode
Ji, W., Wang, F., Liu, D., Qian, J., Cao, Y., Chen, Z., Yang, H., & Ai, X. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta03407a · Cited by 98
Experimental investigation of thermal failure propagation in typical lithium-ion battery modules
Ouyang, D., Weng, J., Hu, J., Chen, M., Huang, Q., & Wang, J. (2019) · Thermochimica Acta · doi:10.1016/j.tca.2019.05.002 · Cited by 98
Kong, L., Wang, Y., Yu, H., Liu, B., Qi, S., Wu, D., Zhong, W.-H. K., Tian, G., & Wang, J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b17521 · Cited by 91
Lithium Ion Battery Fire And Explosion
Wang, Q., Sun, J., & Chu, G. (2005) · Fire Safety Science · doi:10.3801/iafss.fss.8-375 · Cited by 83
Li, Y., An, Y., Tian, Y., et al. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0081913jes · Cited by 80
Buhrmester, C., Moshurchak, L., Wang, R. L. C., & Dahn, J. R. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2221860 · Cited by 73
Reyes-Marambio, J., Moser, F., Gana, F., Severino, B., Calderón-Muñoz, W. R., Palma-Behnke, R. E., Estévez, P. A., Orchard, M. E., & Cortés-Carmona, M. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.12.037 · Cited by 72
(2016) · CRC Press eBooks · doi:10.1201/b11292 · Cited by 71
Limiting Internal Short-Circuit Damage by Electrode Partition for Impact-Tolerant Li-Ion Batteries
Naguib, M., Allu, S., Simunovic, S., Li, J., Wang, H., & Dudney, N. J. (2017) · Joule · doi:10.1016/j.joule.2017.11.003 · Cited by 64
Piao, C., Wang, Z., Ju, C., Zhang, W., & Lu, S. F. (2015) · Mathematical Problems in Engineering · doi:10.1155/2015/168529 · Cited by 63
He, F., Wang, H., & Ma, L. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.07.069 · Cited by 60
Feng, X., Weng, C., He, X., Wang, L., Ren, D., Lu, L., Han, X., & Ouyang, M. (2018) · Energies · doi:10.3390/en11092323 · Cited by 57
Research and Development of Fire Extinguishing Technology for Power Lithium Batteries
Luo, W.-T., Zhu, S.-B., Gong, J.-H., & Zhou, Z. L. (2018) · Procedia Engineering · doi:10.1016/j.proeng.2017.12.045 · Cited by 56
Thermal and overcharge abuse analysis of a redox shuttle for overcharge protection of LiFePO 4
Lamb, J., Orendorff, C. J., Amine, K., Krumdick, G., Zhang, Z., Zhang, L., & Góźdź, A. S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.044 · Cited by 53
Mechanisms of impedance rise in high-power, lithium-ion cells
Bloom, I., Jones, S. A., Polzin, E. G., Battaglia, V., Henriksen, G. L., Motloch, C. G., Wright, R. B., Jungst, R. G., Case, H. L., & Doughty, D. H. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00302-6 · Cited by 51
Lu, W., Xie, K., Chen, Z.-X., Xiong, S.-Z., Pan, Y., & Zheng, C.-M. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.112 · Cited by 48
Experimental Quantification of Vent Mechanism Flow Parameters in 18650 Format Lithium Ion Batteries
Mier, F. A., Hargather, M. J., & Ferreira, S. R. (2019) · Journal of Fluids Engineering · doi:10.1115/1.4042962 · Cited by 37
Fire safety science: Proceedings of the 14th international symposium
Kuligowski, E. D., & Wang, Y. (2024) · Fire Safety Journal · doi:10.1016/j.firesaf.2024.104292 · Cited by 32
Combined battery SOC/SOH estimation using a nonlinear adaptive observer
Lakkis, M. E., Sename, O., Corno, M., & Bresch‐Pietri, D. (2015) · European Control Conference (ECC) · doi:10.1109/ecc.2015.7330754 · Cited by 31
Hazards Associated with High Voltage High Capacity Lithium-Ion Batteries
Jeevarajan, J. A. (2011) · ECS Transactions · doi:10.1149/1.3557704 · Cited by 29
Effect of fibrous separators on the performance of lithium–sulfur batteries
Choudhury, S., Azizi, M., Raguzin, I., et al. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c7cp00310b · Cited by 23
A Hybrid Criterion Based Balancing Strategy for Battery Energy Storage Systems
Xu, J., Cao, B., Li, S., Wang, B., & Ning, B. (2016) · Energy Procedia · doi:10.1016/j.egypro.2016.11.277 · Cited by 17
Gao, K., & Li, S.-D. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.133 · Cited by 14
Life Cycle Prediction Model of Safety Vent Based on Two-Phase Degradation Process
Chen, Y., Gong, W., & Zhang, W. (2018) · IEEE Access · doi:10.1109/access.2018.2809043 · Cited by 10
High Performance Lithium-Ion Batteries Using Fluorinated Compounds
Chen, Z., Zhang, Z., & Amine, K. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-800679-5.00001-4 · Cited by 9
リチウムイオン電池の酷使試験 LiCoO 2 /黒鉛電池の過充電反応の特性解析
LEISING, R. A., Palazzo, M. J., Takeuchi, E. S., et al. (2001) · Journal of The Electrochemical Society · Cited by 8
Cited by
Liquid electrolyte development for low-temperature lithium-ion batteries
Hubble, D., Brown, D. E., Zhao, Y., Fang, C., Lau, J., McCloskey, B. D., & Liu, G. (2022) · Energy & Environmental Science · doi:10.1039/d1ee01789f · Cited by 462
Lai, X., Jin, C., Yi, W., Han, X., Feng, X., Zheng, Y., & Ouyang, M. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.11.026 · Cited by 438
Lithium-ion batteries and the future of sustainable energy: A comprehensive review
Ngoy, K. R., Lukong, V. T., Yoro, K. O., Makambo, J. B., Chukwuati, N. C., Ibegbulam, C., Eterigho-Ikelegbe, O., Ukoba, K., & Jen, T.-C. (2025) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2025.115971 · Cited by 396
Building Practical High‐Voltage Cathode Materials for Lithium‐Ion Batteries
Xiang, J., Wei, Y., Zhong, Y., Yang, Y., Cheng, H., Yuan, L., Xu, H., & Huang, Y. (2022) · Advanced Materials · doi:10.1002/adma.202200912 · Cited by 394
Thermal behaviour and thermal runaway propagation in lithium-ion battery systems – A critical review
Mallick, S., & Gayen, D. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.106894 · Cited by 372
Metadata
- Authors
- Chombo, P. V., & Laoonual, Y.
- Venue
- Journal of Power Sources
- Publisher
- Elsevier BV
- Published
- 2020-12
- Volume
- 478
- Pages
- 228649
- ISSN
- 0378-7753 (ISSN-L)
- OpenAlex
- W3080220210
- Cited by
- 596
- References
- 116
- FWCI
- 23.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.