The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Development of 3D printable engineered cementitious composites with ultra-high tensile ductility for digital construction
Open accessAbstract
The current 3D concrete printing (3DCP) technology is limited by the reinforcing methods. Conventional steel reinforcement is hard to be incorporated in the 3DCP process. To overcome this limitation, this study aims to develop 3D-printable engineered cementitious composites (ECCs) exhibiting ultra-high tensile strain capacity of more than 8%, which can be used for digital construction of ‘self-reinforced’ concrete structures, reducing the reliance on the conventional steel reinforcement. Different volume fractions of polyethylene fibers (1%, 1.5% and 2%) were used to reinforce the ECC matrix. The fresh properties (including the workability, rheological properties and buildability) and the hardened properties (including the compressive and flexural strengths, and the uniaxial tensile performance), along with the microstructure of the developed 3D printable ECCs were experimentally investigated. Conventionally mold-cast ECCs were also prepared and tested for comparison purposes. The results showed that the developed 3D printable PE-ECCs exhibited strong strain-hardening behavior with the tensile strength and tensile strain capacity of up to 5.7 MPa and 11.4%, respectively. In addition, the results showed that the 3D printed PE-ECCs exhibited superior tensile performance to the conventionally mold-cast PE-ECC counterparts. This finding is in good agreement with the results of the microstructural analysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Barnes, H. A., Hutton, J. F., & Walters, K. (1989) · Cited by 2,219
3D printing using concrete extrusion: A roadmap for research
Buswell, R. A., Leal de Silva, W. R., Jones, S. Z., & Dirrenberger, J. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.006 · Cited by 1,604
Dealy, J. M., & Wissbrun, K. F. (1990) · Melt Rheology and Its Role in Plastics Processing · doi:10.1007/978-1-4615-9738-4_1 · Cited by 1,370
Mix design and fresh properties for high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Gibb, A. G. F., & Thorpe, T. (2012) · Materials and Structures · doi:10.1617/s11527-012-9828-z · Cited by 1,218
Rheological requirements for printable concretes
Roussel, N. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.005 · Cited by 1,203
Automated construction by contour crafting—related robotics and information technologies
Khoshnevis, B. (2004) · Automation in Construction · doi:10.1016/j.autcon.2003.08.012 · Cited by 1,161
Vision of 3D printing with concrete — Technical, economic and environmental potentials
De Schutter, G., Lesage, K., Mechtcherine, V., Nerella, V. N., Habert, G., & Agusti-Juan, I. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.06.001 · Cited by 1,072
Hardened properties of high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Law, R., Gibb, A. G. F., & Thorpe, T. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.12.003 · Cited by 1,020
Gosselin, C., Duballet, R., Roux, P., Gaudillière, N., Dirrenberger, J., & Morel, P. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.03.097 · Cited by 962
Building components for an outpost on the lunar soil by means of a novel 3D printing technology
Cesaretti, G., Dini, E., De Kestelier, X., Colla, V., & Pambaguian, L. (2014) · Acta Astronautica · doi:10.1016/j.actaastro.2013.07.034 · Cited by 806
Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material
Panda, B., Paul, S. C., & Tan, M. J. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.07.123 · Cited by 742
Effect of surface moisture on inter-layer strength of 3D printed concrete
Sanjayan, J., Nematollahi, B., Xia, M., & Marchment, T. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.03.232 · Cited by 713
Self-citationMarchon, D., Kawashima, S., Bessaies-Bey, H., Mantellato, S., & Ng, S. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.014 · Cited by 507
Design of a 3D printed concrete bridge by testing
Salet, T. A. M., Ahmed, Z. Y., Bos, F. P., & Laagland, H. L. M. (2018) · Virtual and Physical Prototyping · doi:10.1080/17452759.2018.1476064 · Cited by 504
Properties of 3D-printed fiber-reinforced Portland cement paste
Hambach, M., & Volkmer, D. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.02.001 · Cited by 470
Particle-bed 3D printing in concrete construction – Possibilities and challenges
Lowke, D., Dini, E., Perrot, A., Weger, D., Gehlen, C., & Dillenburger, B. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.018 · Cited by 447
Large-scale 3D printing by a team of mobile robots
Zhang, X., Li, M., Lim, J. H., Weng, Y., Tay, Y. W. D., Pham, H., & Pham, Q.-C. (2018) · Automation in Construction · doi:10.1016/j.autcon.2018.08.004 · Cited by 418
Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay
Panda, B., Ruan, S., Unluer, C., & Tan, M. J. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.11.109 · Cited by 405
Method of formulating geopolymer for 3D printing for construction applications
Xia, M., & Sanjayan, J. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.07.136 · Cited by 359
Self-citationGhaffar, S. H., Corker, J., & Fan, M. (2018) · Automation in Construction · doi:10.1016/j.autcon.2018.05.005 · Cited by 358
Exploratory investigation of solid freeform construction
Pegna, J. (1997) · Automation in Construction · doi:10.1016/s0926-5805(96)00166-5 · Cited by 355
A self-reinforced cementitious composite for building-scale 3D printing
Soltan, D. G., & Li, V. C. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.03.017 · Cited by 330
Nematollahi, B., Vijay, P., Sanjayan, J., Nazari, A., Xia, M., Nerella, V. N., & Mechtcherine, V. (2018) · Materials · doi:10.3390/ma11122352 · Cited by 326
Self-citationPanda, B., Lim, J. H., & Tan, M. J. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.02.040 · Cited by 312
Design 3D printing cementitious materials via Fuller Thompson theory and Marson-Percy model
Weng, Y., Li, M., Tan, M. J., & Qian, S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.12.112 · Cited by 304
Marchment, T., Sanjayan, J., & Xia, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107684 · Cited by 281
Self-citationExperimental Exploration of Metal Cable as Reinforcement in 3D Printed Concrete
Bos, F., Ahmed, Z., Jutinov, E., & Salet, T. (2017) · Materials · doi:10.3390/ma10111314 · Cited by 276
Mechanical and thermal properties of green lightweight engineered cementitious composites
Huang, X., Ranade, R., Zhang, Q., Ni, W., & Li, V. C. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.07.104 · Cited by 269
Ogura, H., Nerella, V. N., & Mechtcherine, V. (2018) · Materials · doi:10.3390/ma11081375 · Cited by 227
An approach to develop printable strain hardening cementitious composites
Chaves Figueiredo, S., Romero Rodríguez, C., Ahmed, Z. Y., Bos, D. H., Xu, Y., Salet, T. M., Çopuroğlu, O., Schlangen, E., & Bos, F. P. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107651 · Cited by 211
Matrix design of strain hardening fiber reinforced engineered geopolymer composite
Nematollahi, B., Sanjayan, J., & Shaikh, F. U. A. (2015) · Composites Part B Engineering · doi:10.1016/j.compositesb.2015.11.039 · Cited by 199
Self-citationMicro-cable reinforced geopolymer composite for extrusion-based 3D printing
Ma, G., Li, Z., Wang, L., & Bai, G. (2019) · Materials Letters · doi:10.1016/j.matlet.2018.09.159 · Cited by 196
Mesh‐Mould: Robotically Fabricated Spatial Meshes as Reinforced Concrete Formwork
Hack, N., & Lauer, W. V. (2014) · Architectural Design · doi:10.1002/ad.1753 · Cited by 189
Said, S. H., & Razak, H. A. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.07.125 · Cited by 163
Bong, S. H., Nematollahi, B., Nazari, A., Xia, M., & Sanjayan, J. (2019) · Materials · doi:10.3390/ma12060902 · Cited by 147
Self-citationLu, B. H., Qian, Y., Li, M., Weng, Y., Leong, K. F., Tan, M. J., & Qian, S. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.03.186 · Cited by 105
Weng, Y., Li, M., Liu, Z., Lao, W., Lu, B. H., Zhang, D., & Tan, M. J. (2018) · Virtual and Physical Prototyping · doi:10.1080/17452759.2018.1555046 · Cited by 100
Rheological behavior and formwork pressure of SCC, SFSCC, and NC mixtures
Lomboy, G. R., Wang, X., & Wang, K. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.05.001 · Cited by 60
Feasibility of Agricultural Biomass Fly Ash Usage for Soil Stabilisation of Road Works
Barišić, I., Grubeša, I. N., Dokšanović, T., & Marković, B. (2019) · Materials · doi:10.3390/ma12091375 · Cited by 43
Cited by
Mechtcherine, V., Bos, F. P., Perrot, A., da Silva, W. R. L., Nerella, V. N., Fataei, S., Wolfs, R. J. M., Sonebi, M., & Roussel, N. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106037 · Cited by 598
Amran, M., Huang, S.-S., Onaizi, A. M., Makul, N., Abdelgader, H. S., & Ozbakkaloglu, T. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129029 · Cited by 548
Mix design concepts for 3D printable concrete: A review
Zhang, C., Nerella, V. N., Krishna, A., Wang, S., Zhang, Y., Mechtcherine, V., & Banthia, N. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104155 · Cited by 421
Self-citationExtrusion-based concrete 3D printing from a material perspective: A state-of-the-art review
Mohan, M. K., Rahul, A. V., De Schutter, G., & Van Tittelboom, K. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103855 · Cited by 384
Huang, B.-T., Wu, J.-Q., Yu, J., Dai, J.-G., Leung, C. K. Y., & Li, V. C. (2021) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106292 · Cited by 364
Metadata
- Authors
- Zhu, B., Pan, J., Nematollahi, B., Zhou, Z., Zhang, Y., & Sanjayan, J.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2019-11
- Volume
- 181
- Pages
- 108088
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2965144800
- Cited by
- 305
- References
- 39
- FWCI
- 20.38
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.