The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Fused Deposition modeling process parameters optimization and effect on mechanical properties and part quality: Review and reflection on present research
Abstract
Abstract Additive manufacturing (AM) was developed initially as a technique for rapid prototyping, to visualize, test and authenticate a design, before end-user production of the design. In recent years, Additive Manufacturing (AM) technique Fused Deposition modeling (FDM), has developed to become a rapid manufacturing technique because of the ability to produce complex parts layer-by-layer in lesser production cycle time than as compared to conventional machining processes. FDM also offers the advantage of the lowest cost because of no tooling requirements. Despite these advantages, building parts by utilizing FDM for end-use is still a demanding endeavor. This is because FDM has multiple processing parameters, which affect the part quality, mechanical properties, build time and dimensional accuracy. These FDM processing parameters include air gap, build orientation, infill percentage, raster angle, layer thickness, etc. Depending upon the application, for which the part is manufactured, careful selection of these process parameters needs to be done. For a specific output requirement, some of the process parameters are significant than the rest, these significant process parameters need to be identified and optimized. Due to this, researchers have explored and utilized various experimental or statistical Design of Experiment (DOE) techniques for optimizing the FDM process parameters to improve the mechanical properties or part quality or both. Some of these DOE techniques include the Taguchi method, Genetic algorithm (GA), gray relational, Response surface method (RSM), fractional factorial, Artificial Neural networks (ANN), Fuzzy logic, ANOVA, etc. This article aims at reviewing the current research on the statistical and experimental design techniques for different applications or output responses such as enhancing mechanical properties, build time, part quality, etc.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Review of selective laser melting: Materials and applications
Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E., & Sing, S. L. (2015) · Applied Physics Reviews · doi:10.1063/1.4935926 · Cited by 2,353
3D printing with polymers: Challenges among expanding options and opportunities
Stansbury, J. W., & Idacavage, M. J. (2016) · Dental Materials · doi:10.1016/j.dental.2015.09.018 · Cited by 1,732
Mohamed, O. A., Masood, S. H., & Bhowmik, J. L. (2015) · Advances in Manufacturing · doi:10.1007/s40436-014-0097-7 · Cited by 1,481
Mechanical characterization of 3D-printed polymers
Dizon, J. R. C., Espera, A. H., Chen, Q., & Advincula, R. C. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.12.002 · Cited by 1,340
Shamsaei, N., Yadollahi, A., Bian, L., & Thompson, S. M. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.002 · Cited by 1,108
FDM process parameters influence over the mechanical properties of polymer specimens: A review
Popescu, D., Zapciu, A., Amza, C., Baciu, F., & Marinescu, R. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.05.020 · Cited by 1,015
Three-Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model
Sachs, E., Cima, M., & Cornie, J. (1990) · CIRP Annals · doi:10.1016/s0007-8506(07)61035-x · Cited by 871
Sood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2009) · Materials & Design · doi:10.1016/j.matdes.2009.04.030 · Cited by 626
Optimization of rapid prototyping parameters for production of flexible ABS object
Lee, B. H., Abdullah, J. M., & Khan, Z. A. (2005) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2005.02.259 · Cited by 578
Sood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2012) · Journal of Advanced Research · doi:10.1016/j.jare.2011.05.001 · Cited by 576
3D Printing of Polymer Nanocomposites via Stereolithography
Manapat, J. Z., Chen, Q., Ye, P., & Advincula, R. C. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600553 · Cited by 565
A review of process development steps for new material systems in three dimensional printing (3DP)
Utela, B., Storti, D., Anderson, R., & Ganter, M. (2008) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2009.03.002 · Cited by 548
Durgun, I., & Ertan, R. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-10-2012-0091 · Cited by 530
Lasers in additive manufacturing: A review
Lee, H., Lim, C. H. J., Low, M. J., Tham, N., Murukeshan, V. M., & Kim, Y.-J. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0037-7 · Cited by 449
Fox, J. C., Moylan, S. P., & Lane, B. M. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.02.347 · Cited by 377
Mechanical Property Optimization of FDM PLA in Shear with Multiple Objectives
Torres, J., Cotelo, J., Karl, J., & Gordon, A. P. (2015) · JOM · doi:10.1007/s11837-015-1367-y · Cited by 374
Current Biomedical Applications of 3D Printing and Additive Manufacturing
Ahangar, P., Cooke, M. E., Weber, M. H., & Rosenzweig, D. H. (2019) · Applied Sciences · doi:10.3390/app9081713 · Cited by 309
Omar, O. M., MOHAMED, M., SyedH., Masood, ., & Bhowmik (2015) · Acta Scientiarum Naturalium Universitatis Sunyatseni · Cited by 302
Bio-resin for high resolution lithography-based biofabrication of complex cell-laden constructs
Lim, K. S., Levato, R., Costa, P. F., Castilho, M. D., Alcala-Orozco, C. R., van Dorenmalen, K. M. A., Melchels, F. P. W., Gawlitta, D., Hooper, G. J., Malda, J., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aac00c · Cited by 296
Zaldivar, R. J., Witkin, D. B., McLouth, T., Patel, D. N., Schmitt, K., & Nokes, J. P. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2016.11.007 · Cited by 277
Mechanical Properties Optimization of Poly-Ether-Ether-Ketone via Fused Deposition Modeling
Deng, X., Zeng, Z., Peng, B., Yan, S., & Ke, W. (2018) · Materials · doi:10.3390/ma11020216 · Cited by 265
Yap, Y. L., Wang, C., Sing, S. L., Dikshit, V., Yeong, W. Y., & Wei, J. (2017) · Precision Engineering · doi:10.1016/j.precisioneng.2017.05.015 · Cited by 228
Chen, H., & Zhao, Y. F. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2014-0149 · Cited by 204
Liu, X., Zhang, M., Li, S., Si, L., Peng, J., & Yuan, H. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9263-3 · Cited by 176
Shim, D.-S., Baek, G.-Y., Seo, J.-S., Shin, G.-Y., Kim, K.-P., & Lee, K.-Y. (2016) · Optics & Laser Technology · doi:10.1016/j.optlastec.2016.07.001 · Cited by 172
Analysis of tensile strength of a fused filament fabricated PLA part using an open-source 3D printer
Rajpurohit, S. R., & Dave, H. K. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-3047-x · Cited by 165
Heller, C., Schwentenwein, M., Russmueller, G., Varga, F., Stampfl, J., & Liska, R. (2009) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.23734 · Cited by 163
Raju, M., Gupta, M. K., Bhanot, N., & Sharma, V. S. (2019) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-018-1420-0 · Cited by 161
Optimization of Binder Jetting Using Taguchi Method
Shrestha, S., & Manogharan, G. P. (2017) · JOM · doi:10.1007/s11837-016-2231-4 · Cited by 145
Studies on Parametric Optimization for Fused Deposition Modelling Process
Nidagundi, V. B., Keshavamurthy, R., & Prakash, C. (2015) · Materials Today Proceedings · doi:10.1016/j.matpr.2015.07.097 · Cited by 137
Yang, Y., Li, L., & Zhao, J. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.12.009 · Cited by 131
Chen, H., Yang, X., Chen, L., Wang, Y., & Sun, Y. (2016) · Scientific Reports · doi:10.1038/srep19207 · Cited by 123
Li, J., Monaghan, T., Nguyen, T. T., Kay, R. W., Friel, R. J., & Harris, R. A. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.01.013 · Cited by 88
Moradi, M., Meiabadi, M. S., & Kaplan, A. F. H. (2019) · Metals and Materials International · doi:10.1007/s12540-019-00272-9 · Cited by 85
Hehr, A., & Dapino, M. J. (2015) · Composites Part B Engineering · doi:10.1016/j.compositesb.2015.03.005 · Cited by 76
Fitzharris, E. R., Watt, I., Rosen, D. W., & Shofner, M. L. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.10.003 · Cited by 72
Research on Shape and Dimensional Accuracy of FDM Produced Parts
Beniak, J., Križan, P., Šooš, Ľ., & Matúš, M. (2019) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/501/1/012030 · Cited by 63
Paul, B. K., & Voorakarnam, V. (2001) · Journal of Manufacturing Processes · doi:10.1016/s1526-6125(01)70124-7 · Cited by 62
Srivastava, M., Rathee, S., Maheshwari, S., & Kundra, T. K. (2018) · International Journal of Rapid Manufacturing · doi:10.1504/ijrapidm.2018.089727 · Cited by 47
Berufstypische, neutrale Handlungen eines Rechtsanwalts als strafbare Beihilfe
Wohlers, W. (2017) · Juristische Rundschau · doi:10.1515/juru-2017-0098 · Cited by 23
Optimization of Selective Laser Sintering Process Parameters on Surface Quality
Akilesh, M., Elango, P., Devanand, A. A., Soundararajan, R., & Varthanan, P. A. (2018) · Springer eBooks · doi:10.1007/978-981-13-0305-0_13 · Cited by 16
Cited by
A review on the various processing parameters in FDM
Solomon, I. J., Sevvel, P., & Gunasekaran, J. (2021) · Materials Today: Proceedings · doi:10.1016/j.matpr.2020.05.484 · Cited by 430
Methods and materials for additive manufacturing: A critical review on advancements and challenges
Bhuvanesh Kumar, M., & Sathiya, P. (2021) · Thin-Walled Structures · doi:10.1016/j.tws.2020.107228 · Cited by 372
Valvez, S., Silva, A. P., & Reis, P. N. B. (2022) · Polymers · doi:10.3390/polym14132564 · Cited by 195
Metadata
- Authors
- Jaisingh Sheoran, A., & Kumar, H.
- Venue
- Materials Today: Proceedings
- Publisher
- Elsevier BV
- Published
- 2020
- Volume
- 21
- Pages
- 1659-1672
- ISSN
- 2214-7853 (ISSN-L)
- OpenAlex
- W2995725238
- Cited by
- 342
- References
- 44
- FWCI
- 15.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.