The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
ASAP7: A 7-nm finFET predictive process design kit
Open accessAbstract
We describe a 7-nm predictive process design kit (PDK) called the ASAP7 PDK, developed in collaboration with ARM Ltd. for academic use. The PDK is realistic, based on current assumptions for the 7-nm technology node, but is not tied to any specific foundry. The initial version assumes EUV lithography for key layers, a decision based on its present near cost-effectiveness and resulting simpler layout rules. Non-EUV layers assume appropriate multiple patterning schemes, i.e., self-aligned quadruple patterning (SAQP), self-aligned double patterning (SADP) or litho-etch litho-etch (LELE), based on 193-nm optical immersion lithography. The specific design rule derivation is explained for key layers at the front end of line (FEOL), middle of line (MOL), and back end of line (BEOL) of the predictive process modeled. The MOL and BEOL DRC rules rely on estimation of time dependent dielectric breakdown requirements using layer alignments determined with projected machine to machine overlay assumptions, with significant guard-bands where possible. A high density, low-power standard cell architecture, developed using design/technology co-optimization (DTCO), as well as example SRAM cells are shown. The PDK transistor electrical assumptions are also explained, as are the FEOL design rules, and the models include basic design corners. The transistor models support four threshold voltage ( V th ) levels for both NMOS and PMOS transistors. Cadence Virtuoso technology files and associated schematic and layout editing, as well as netlisting are supported. DRC, LVS, and full parasitic extraction is enabled through Mentor Calibre decks.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Semiconductor Material and Device Characterization
Schroder, D. K. (2005) · Wiley eBooks · doi:10.1002/0471749095 · Cited by 7,435
Dark silicon and the end of multicore scaling
Esmaeilzadeh, H., Blem, E., St. Amant, R., Sankaralingam, K., & Burger, D. (2011) · Proceedings of the 38th annual international symposium on Computer architecture · doi:10.1145/2000064.2000108 · Cited by 1,532
Auth, C., Allen, C., Blattner, A., Bergstrom, D., Brazier, M., Bost, M., Buehler, M., Chikarmane, V., Ghani, T., Glassman, T., et al. (2012) · 2012 Symposium on VLSI Technology (VLSIT) · doi:10.1109/vlsit.2012.6242496 · Cited by 782
Bowman, K. A., Duvall, S. G., & Meindl, J. D. (2002) · IEEE Journal of Solid-State Circuits · doi:10.1109/4.982424 · Cited by 743
Natarajan, S., Agostinelli, M., Akbar, S., Bost, M., Bowonder, A., Chikarmane, V., Chouksey, S., Dasgupta, A., Fischer, K., Fu, Q., et al. (2014) · 2014 IEEE International Electron Devices Meeting · doi:10.1109/iedm.2014.7046976 · Cited by 543
Dark silicon and the end of multicore scaling
Esmaeilzadeh, H., Blem, E., St. Amant, R., Sankaralingam, K., & Burger, D. (2011) · ACM SIGARCH Computer Architecture News · doi:10.1145/2024723.2000108 · Cited by 253
45nm High-k + metal gate strain-enhanced transistors
Auth, C., Cappellani, A., Chun, J.-S., Dalis, A., Davis, A., Ghani, T., Glass, G., Glassman, T., Harper, M., Hattendorf, M., et al. (2008) · 2008 Symposium on VLSI Technology · doi:10.1109/vlsit.2008.4588589 · Cited by 207
Self-citationA 16nm FinFET CMOS technology for mobile SoC and computing applications
Wu, S.-Y. M., Lin, C.-H., Chiang, M. C., et al. (2013) · Technical digest - International Electron Devices Meeting/Technical digest · doi:10.1109/iedm.2013.6724591 · Cited by 151
Semiconductor Logic Technology Innovation to Achieve Sub-10 nm Manufacturing
Schuegraf, K. K., Abraham, M. C., Brand, A. D., Naik, M., & Thakur, R. P. S. (2013) · IEEE Journal of the Electron Devices Society · doi:10.1109/jeds.2013.2271582 · Cited by 101
Overlay and edge placement control strategies for the 7nm node using EUV and ArF lithography
Mulkens, J., Hanna, M., Wei, H., Vaenkatesan, V., Megens, H. J. L., & Slotboom, D. (2015) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2085761 · Cited by 71
Cited by
In-memory computing with resistive switching devices
Ielmini, D., & Wong, H.-S. P. (2018) · Nature Electronics · doi:10.1038/s41928-018-0092-2 · Cited by 2,298
Modern microprocessor built from complementary carbon nanotube transistors
Hills, G., Lau, C., Wright, A., Fuller, S., Bishop, M. D., Srimani, T., Kanhaiya, P., Ho, R., Amer, A., Stein, Y., et al. (2019) · Nature · doi:10.1038/s41586-019-1493-8 · Cited by 691
Chipyard: Integrated Design, Simulation, and Implementation Framework for Custom SoCs
Amid, A., Biancolin, D., Gonzalez, A., Grubb, D., Karandikar, S., Liew, H., Magyar, A., Mao, H., Ou, A., Pemberton, N., et al. (2020) · IEEE Micro · doi:10.1109/mm.2020.2996616 · Cited by 358
AutoDMP: Automated DREAMPlace-based Macro Placement
Agnesina, A., Rajvanshi, P., Yang, T., Pradipta, G., Jiao, A., Keller, B., Khailany, B., & Ren, H. (2023) · Proceedings of the 2023 International Symposium on Physical Design · doi:10.1145/3569052.3578923 · Cited by 52
VPU-CIM: A 130nm, 33.98 TOPS/W RRAM based Compute-In-Memory Vector Co-Processor
J, C. M., Rayapati, V., Rao, N., & Suri, M. (2024) · 2024 IEEE International Symposium on Circuits and Systems (ISCAS) · doi:10.1109/iscas58744.2024.10558155 · Cited by 2
Metadata
- Authors
- Clark, L. T., Vashishtha, V., Shifren, L., Gujja, A., Sinha, S., Cline, B., Ramamurthy, C., & Yeric, G.
- Venue
- Microelectronics Journal
- Publisher
- Elsevier BV
- Published
- 2016-07
- Volume
- 53
- Pages
- 105-115
- ISSN
- 1879-2391 (ISSN-L)
- OpenAlex
- W2346205343
- Cited by
- 778
- References
- 20
- FWCI
- 14.03
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: ASAP7: A 7-nm finFET predictive process design kit. https://app.cochat.ai/papers/10.1016/j.mejo.2016.04.006
- The paper
- Clark, L. T., Vashishtha, V., Shifren, L., Gujja, A., Sinha, S., Cline, B., Ramamurthy, C., & Yeric, G. (2016). ASAP7: A 7-nm finFET predictive process design kit. Microelectronics Journal. https://doi.org/10.1016/j.mejo.2016.04.006
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.