The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Influence of the pore size and porosity of selective laser melted Ti6Al4V ELI porous scaffold on cell proliferation, osteogenesis and bone ingrowth
Open accessAbstract
This paper systematically investigates the biomedical performance of selective laser melted (SLM) porous Ti6Al4V ELI scaffolds for bone implantation through in vitro and in vivo experiments. Scaffolds with pore sizes of 500 μm, 600 μm and 700 μm and porosities of 60% and 70% were manufactured in order to explore the optimum pore size and porosity. Rat bone marrow mesenchymal stem cells (rBMMSCs) were used in the in vitro experiments. Cell Counting Kit-8, live/dead staining and scanning electron microscope were used to assess the cytotoxicity of the porous scaffolds. DNA content quantification was performed to investigate cell proliferation on the porous scaffolds. The osteogenic differentiation of cells was measured by alkaline phosphatase (ALP) activity and osteogenic gene expressions, including bone morphogenetic protein-2 (BMP-2), collagen type 1α1 (COL-1), osteocalcin (OCN), osteopontin (OPN) and runt-related transcription factor-2 (RUNX-2). The Sprague-Dawley (SD) rat models with distal femoral condyles defect were used in the in vivo experiments. Micro-CT analysis and histological analysis were performed after implantation surgery to reveal the bone ingrowth into the porous scaffolds. All in vitro data were analyzed by one-way ANOVA followed by Tukey post hoc tests, in vivo data were analyzed using Kruskall-Wallis ANOVA and Conover-Inman post-hoc test. Based on the in vitro and in vivo experiments, it is found that the porous scaffolds manufactured by SLM did not induce a cytotoxic effect. Among all the porous scaffolds, the scaffold with a pore size of 500 μm and porosity of 60% showed the best cell proliferation and osteogenic differentiation (in vitro experiments) and bone ingrowth (in vivo experiments).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
RESISTANCE OF SOLID SURFACES TO WETTING BY WATER
Wenzel, R. N. (1936) · Industrial & Engineering Chemistry · doi:10.1021/ie50320a024 · Cited by 13,316
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
New Developments of Ti-Based Alloys for Biomedical Applications
Li, Y., Yang, C., Zhao, H., Qu, S., Li, X., & Li, Y. (2014) · Materials · doi:10.3390/ma7031709 · Cited by 1,048
Zysset, P. K., Edward Guo, X., Edward Hoffler, C., Moore, K. E., & Goldstein, S. A. (1999) · Journal of Biomechanics · doi:10.1016/s0021-9290(99)00111-6 · Cited by 1,006
Bacakova, L., Filova, E., Parizek, M., Ruml, T., & Svorcik, V. (2011) · Biotechnology Advances · doi:10.1016/j.biotechadv.2011.06.004 · Cited by 1,000
Selective laser melting of biocompatible metals for rapid manufacturing of medical parts
Vandenbroucke, B., & Kruth, J. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710776142 · Cited by 981
Taniguchi, N., Fujibayashi, S., Takemoto, M., Sasaki, K., Otsuki, B., Nakamura, T., Matsushita, T., Kokubo, T., & Matsuda, S. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.10.069 · Cited by 960
Stein, G. S., Lian, J. B., & Owen, T. A. (1990) · The FASEB Journal · doi:10.1096/fasebj.4.13.2210157 · Cited by 935
Heinl, P., Müller, L., Körner, C., Singer, R. F., & Müller, F. A. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.03.013 · Cited by 815
Intrinsic extracellular matrix properties regulate stem cell differentiation
Reilly, G. C., & Engler, A. J. (2010) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2009.09.009 · Cited by 780
Van Bael, S., Chai, Y. C., Truscello, S., Moesen, M., Kerckhofs, G., Van Oosterwyck, H., Kruth, J.-P., & Schrooten, J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.04.001 · Cited by 766
Pore Size of Porous Hydroxyapatite as the Cell-Substratum Controls BMP-Induced Osteogenesis
Tsuruga, E., Takita, H., Itoh, H., Wakisaka, Y., & Kuboki, Y. (1997) · Journal of Biochemistry · doi:10.1093/oxfordjournals.jbchem.a021589 · Cited by 706
Yan, C., Hao, L., Hussein, A., Young, P., & Raymont, D. (2014) · Materials & Design · doi:10.1016/j.matdes.2013.10.027 · Cited by 622
The effect of geometry on three-dimensional tissue growth
Rumpler, M., Woesz, A., Dunlop, J. W. C., van Dongen, J. T., & Fratzl, P. (2008) · Journal of The Royal Society Interface · doi:10.1098/rsif.2008.0064 · Cited by 531
Hollander, D. A., von Walter, M., Wirtz, T., Sellei, R., Schmidt-Rohlfing, B., Paar, O., & Erli, H.-J. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.07.041 · Cited by 482
Processing and biocompatibility evaluation of laser processed porous titanium
Xue, W., Krishna, B. V., Bandyopadhyay, A., & Bose, S. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2007.05.009 · Cited by 471
Additively manufactured porous tantalum implants
Wauthle, R., van der Stok, J., Amin Yavari, S., Van Humbeeck, J., Kruth, J.-P., Zadpoor, A. A., Weinans, H., Mulier, M., & Schrooten, J. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.12.003 · Cited by 417
The Additive Manufacturing (AM) of titanium alloys
Dutta, B., & Froes, F. H. (. (2017) · Metal Powder Report · doi:10.1016/j.mprp.2016.12.062 · Cited by 400
Pattanayak, D. K., Fukuda, A., Matsushita, T., Takemoto, M., Fujibayashi, S., Sasaki, K., Nishida, N., Nakamura, T., & Kokubo, T. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.034 · Cited by 384
Ataee, A., Li, Y., Brandt, M., & Wen, C. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.08.005 · Cited by 383
Computer-aided design and fabrication of dental restorations
Strub, J. R., Rekow, E. D., & Witkowski, S. (2006) · The Journal of the American Dental Association · doi:10.14219/jada.archive.2006.0389 · Cited by 362
Osteoinduction of porous Ti implants with a channel structure fabricated by selective laser melting
Fukuda, A., Takemoto, M., Saito, T., Fujibayashi, S., Neo, M., Pattanayak, D. K., Matsushita, T., Sasaki, K., Nishida, N., Kokubo, T., et al. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.01.037 · Cited by 349
Yan, X., Yin, S., Chen, C., Huang, C., Bolot, R., Lupoi, R., Kuang, M., Ma, W., Coddet, C., Liao, H., et al. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.06.076 · Cited by 326
Self-citationPobloth, A.-M., Checa, S., Razi, H., Petersen, A., Weaver, J. C., Schmidt-Bleek, K., Windolf, M., Tatai, A. Á., Roth, C. P., Schaser, K.-D., et al. (2018) · Science Translational Medicine · doi:10.1126/scitranslmed.aam8828 · Cited by 312
Zhao, L., Liu, L., Wu, Z., Zhang, Y., & Chu, P. K. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2011.12.024 · Cited by 306
Self-citationLi, G., Wang, L., Pan, W., Yang, F., Jiang, W., Wu, X., Kong, X., Dai, K., & Hao, Y. (2016) · Scientific Reports · doi:10.1038/srep34072 · Cited by 251
Viable Osteogenic Cells Are Obligatory for Tissue-Engineered Ectopic Bone Formation in Goats
Kruyt, M. C., de Bruijn, J. D., Wilson, C. E., Oner, F. C., van Blitterswijk, C. A., Verbout, A. J., & Dhert, W. J. A. (2003) · Tissue Engineering · doi:10.1089/107632703764664792 · Cited by 213
Chang, B., Song, W., Han, T., Yan, J., Li, F., Zhao, L., Kou, H., & Zhang, Y. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.01.022 · Cited by 208
Kinetics of Protein Adsorption and Desorption on Surfaces with Grafted Polymers
Fang, F., Satulovsky, J., & Szleifer, I. (2005) · Biophysical Journal · doi:10.1529/biophysj.104.055079 · Cited by 159
Kapat, K., Srivas, P. K., Rameshbabu, A. P., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13960 · Cited by 154
Wieding, J., Lindner, T., Bergschmidt, P., & Bader, R. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2014.12.010 · Cited by 145
Wysocki, B., Idaszek, J., Buhagiar, J., Szlązak, K., Brynk, T., Kurzydłowski, K. J., & Święszkowski, W. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.04.019 · Cited by 126
Accelerated stem cell attachment to ultrafine grained titanium
Estrin, Y., Ivanova, E. P., Michalska, A., Truong, V. K., Lapovok, R., & Boyd, R. L. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.033 · Cited by 125
Yan, X., Huang, C., Chen, C., Bolot, R., Dembinski, L., Huang, R., Ma, W., Liao, H., & Liu, M. (2018) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2018.03.072 · Cited by 92
Self-citationYan, J., Zhang, C., Zhao, Y., Cao, C., Wu, K., Zhao, L., & Zhang, Y. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.05.089 · Cited by 90
Intraosseous metal implants in orthopedics: A review
Rony, L., Lancigu, R., & Hubert, L. (2018) · Morphologie · doi:10.1016/j.morpho.2018.09.003 · Cited by 89
The Influence of Selective Laser Melting (SLM) Process Parameters on In-Vitro Cell Response
Wysocki, B., Idaszek, J., Zdunek, J., Rożniatowski, K., Pisarek, M., Yamamoto, A., & Święszkowski, W. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19061619 · Cited by 67
Wang, P., Bennetsen, D. T., Foss, M., Ameringer, T., Thissen, H. W., & Kingshott, P. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00107 · Cited by 63
Towards stiffness prediction of cellular structures made by electron beam melting (EBM)
Suard, M., Lhuissier, P., Dendievel, R., Blandin, J. J., Vignat, F., & Villeneuve, F. (2014) · Powder Metallurgy · doi:10.1179/1743290114y.0000000093 · Cited by 60
Impens, S., Chen, Y., Mullens, S., Luyten, F. P., & Schrooten, J. (2010) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2010.0069 · Cited by 50
A novel hybrid 3D-printed titanium scaffold for osteogenesis in a rabbit calvarial defect model.
Yin, B., Xue, B., Wu, Z., Ma, J., & Wang, K. (2018) · PubMed · Cited by 25
Cited by
Zhu, G., Zhang, T., Chen, M., Yao, K., Huang, X., Zhang, B., Li, Y., Liu, J., Wang, Y., & Zhao, Z. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.03.043 · Cited by 494
Selective laser melting of Ti6Al4V alloy: Process parameters, defects and post-treatments
Singla, A. K., Banerjee, M., Sharma, A., Singh, J., Bansal, A., Gupta, M. K., Khanna, N., Shahi, A. S., & Goyal, D. K. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.01.009 · Cited by 383
Scaffolds for bone-tissue engineering
Lee, S. S., Du, X., Kim, I., & Ferguson, S. J. (2022) · Matter · doi:10.1016/j.matt.2022.06.003 · Cited by 375
Osteoimmunity‐Regulating Biomimetically Hierarchical Scaffold for Augmented Bone Regeneration
Zhang, J., Tong, D., Song, H., Ruan, R., Sun, Y., Lin, Y., Wang, J., Hou, L., Dai, J., Ding, J., et al. (2022) · Advanced Materials · doi:10.1002/adma.202202044 · Cited by 349
Promotion of Bone Regeneration Using Bioinspired PLGA/MH/ECM Scaffold Combined with Bioactive PDRN
Kim, D.-S., Lee, J.-K., Jung, J.-W., Baek, S.-W., Kim, J. H., Heo, Y., Kim, T.-H., & Han, D. K. (2021) · Materials · doi:10.3390/ma14154149 · Cited by 47
Metadata
- Authors
- Chen, Z., Yan, X., Yin, S., Liu, L., Liu, X., Zhao, G., Ma, W., Qi, W., Ren, Z., Liao, H., Liu, M., Cai, D., & Fang, H.
- Venue
- Materials Science and Engineering: C
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 106
- Pages
- 110289
- ISSN
- 0928-4931 (ISSN-L)
- OpenAlex
- W2979526779
- Cited by
- 324
- References
- 42
- FWCI
- 9.62
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.