The DOI matches its Crossref record; 211 of the 211 references it cites were found in a registry or an index.
Structure-properties relationships of cellular materials from biobased polyurethane foams
Open accessAbstract
The polyurethanes (PU) are a very versatile family of materials mainly obtained by combinations of polyols and polyisocyanates. Based on their annual worldwide production of around 20 million tons and a global market of $50 billion (2016), PUs rank 6th among all polymers. Through their value chain, PUs involve different players: (i) the chemists producing most of PUs raw materials, (ii) the PUs producers from the raw materials, (iii) the compounders/assemblers who formulate PUs into their final products, and finally (iv) the end-users. Due to the multiplicity of their structures, PUs can be used in various forms and applications. Cellular materials are the largest part of this market (more than 60 %) with segments including the furniture, automotive, bedding, insulation, building or construction markets. Two main types of foam can be fabricated: (i) flexible with open cells, stress and tensile properties, e.g., furniture or bedding, and (ii) rigid with closed cells, low thermal conductivity, low density and high dimensional stability mainly for thermal insulation, e.g., building industries. The formulation step significantly influences the microstructure or morphology of these cellular materials and impacts the final foam properties. Even if some partially biobased compounds (polyols) can be used, commercial PU cellular materials are till now mainly based on fossil resources. However, future materials will combine high performance with low environmental impact in order to fulfill societal expectations. In this way, new biobased compounds combining different fields such as biotech, chemistry, science and materials engineering are more and more used in complex formulations for renewable foams, leading to specific renewable macromolecular architectures. This review aims to highlight the main biobased components (polyols, polyisocyanates and additives) used in formulations for PU foams, in relation to the corresponding fabrications, morphologies and properties. The main renewable sources come from (mono and poly)sugars, oleo-chemistry, polyphenols (lignins, tannins …), or different compounds from white biotech processes from agro-wastes … The impact of these different components on material performances is discussed more particularly for rigid polyurethane foams. The structure-property relationships are analyzed with a scope on cellular morphology, mechanical, thermal properties, fire resistance, and insulation behavior. Finally, an analysis focus on future perspectives on biobased PU foams is conducted.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Transforming Our World: The 2030 Agenda for Sustainable Development
(2018) · A New Era in Global Health · doi:10.1891/9780826190123.ap02 · Cited by 19,351
Chitin and chitosan: Properties and applications
Rinaudo, M. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.06.001 · Cited by 8,259
Transforming our world: the 2030 Agenda for Sustainable Development
(2022) · Sustainable Development Goals · doi:10.5040/9781509934058.0025 · Cited by 6,562
Plastic debris in the open ocean
Cózar, A., Echevarría, F., González-Gordillo, J. I., Irigoien, X., Úbeda, B., Hernández-León, S., Palma, Á. T., Navarro, S., García-de-Lomas, J., Ruiz, A., et al. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1314705111 · Cited by 3,133
Isikgor, F. H., & Becer, C. R. (2015) · Polymer Chemistry · doi:10.1039/c5py00263j · Cited by 2,775
The biorefinery concept: Using biomass instead of oil for producing energy and chemicals
Cherubini, F. (2010) · Energy Conversion and Management · doi:10.1016/j.enconman.2010.01.015 · Cited by 2,229
The theory of Ostwald ripening
Voorhees, P. W. (1985) · Journal of Statistical Physics · doi:10.1007/bf01017860 · Cited by 2,087
Chemical modification of lignins: Towards biobased polymers
Laurichesse, S., & Avérous, L. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.11.004 · Cited by 2,058
Self-citationMolecular Size Distribution in Three Dimensional Polymers. I. Gelation 1
Flory, P. J. (1941) · Journal of the American Chemical Society · doi:10.1021/ja01856a061 · Cited by 1,873
Polyurethane types, synthesis and applications – a review
Akindoyo, J. O., Beg, M. D. H., Ghazali, S., Islam, M. R., Jeyaratnam, N., & Yuvaraj, A. R. (2016) · RSC Advances · doi:10.1039/c6ra14525f · Cited by 1,831
Progress in Green Polymer Composites from Lignin for Multifunctional Applications: A Review
Thakur, V. K., Thakur, M. K., Raghavan, P., & Kessler, M. R. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500087z · Cited by 1,398
Current progress on bio-based polymers and their future trends
Babu, R. P., O'Connor, K., & Seeram, R. (2013) · Progress in Biomaterials · doi:10.1186/2194-0517-2-8 · Cited by 1,126
Denissen, W., Rivero, G., Nicolaÿ, R., Leibler, L., Winne, J. M., & Du Prez, F. E. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201404553 · Cited by 1,121
Metabolic engineering of Escherichia coli for direct production of 1,4-butanediol
Yim, H., Haselbeck, R., Niu, W., Pujol-Baxley, C., Burgard, A., Boldt, J., Khandurina, J., Trawick, J. D., Osterhout, R. E., Stephen, R., et al. (2011) · Nature Chemical Biology · doi:10.1038/nchembio.580 · Cited by 1,114
Stockmayer, W. H. (1944) · The Journal of Chemical Physics · doi:10.1063/1.1723922 · Cited by 946
Biodegradable and Bio‐Based Polymers: Future Prospects of Eco‐Friendly Plastics
Iwata, T. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410770 · Cited by 937
Polyurethanes from Vegetable Oils
Petrović, Z. S. (2008) · Polymer Reviews · doi:10.1080/15583720701834224 · Cited by 929
Herzberger, J., Niederer, K., Pohlit, H., Seiwert, J., Worm, M., Wurm, F. R., & Frey, H. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00441 · Cited by 865
Biobased Amines: From Synthesis to Polymers; Present and Future
Froidevaux, V., Negrell, C., Caillol, S., Pascault, J.-P., & Boutevin, B. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00486 · Cited by 806
Progress of Polymers from Renewable Resources: Furans, Vegetable Oils, and Polysaccharides
Gandini, A., Lacerda, T. M., Carvalho, A. J. F., & Trovatti, E. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00264 · Cited by 756
Isocyanate-Free Routes to Polyurethanes and Poly(hydroxy Urethane)s
Maisonneuve, L., Lamarzelle, O., Rix, E., Grau, E., & Cramail, H. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00355 · Cited by 731
CHARACTERIZATION OF CRUDE GLYCEROL FROM BIODIESEL PRODUCTION FROM MULTIPLE FEEDSTOCKS
Thompson, J. C., & He, B. B. (2006) · Applied Engineering in Agriculture · doi:10.13031/2013.20272 · Cited by 688
Chlorofluoromethanes in the environment
Rowland, F. S., & Molina, M. J. (1975) · Reviews of Geophysics · doi:10.1029/rg013i001p00001 · Cited by 683
Traditional, state-of-the-art and renewable thermal building insulation materials: An overview
Abu-Jdayil, B., Mourad, A.-H., Hittini, W., Hassan, M., & Hameedi, S. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.04.102 · Cited by 638
From monomers to polymers from renewable resources: Recent advances
Gandini, A., & Lacerda, T. M. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.11.002 · Cited by 620
Szycher's Handbook of Polyurethanes
(2012) · CRC Press eBooks · doi:10.1201/b12343 · Cited by 608
A comprehensive metabolic map for production of bio-based chemicals
Lee, S. Y., Kim, H. U., Chae, T. U., Cho, J. S., Kim, J. W., Shin, J. H., Kim, D. I., Ko, Y.-S., Jang, W. D., & Jang, Y.-S. (2019) · Nature Catalysis · doi:10.1038/s41929-018-0212-4 · Cited by 607
Szycher's handbook of polyurethanes
(1999) · Choice Reviews Online · doi:10.5860/choice.37-1570 · Cited by 556
From Vegetable Oils to Polyurethanes: Synthetic Routes to Polyols and Main Industrial Products
Desroches, M., Escouvois, M., Auvergne, R., Caillol, S., & Boutevin, B. (2012) · Polymer Reviews · doi:10.1080/15583724.2011.640443 · Cited by 520
Non‐isocyanate polyurethanes: synthesis, properties, and applications
Rokicki, G., Parzuchowski, P. G., & Mazurek, M. (2015) · Polymers for Advanced Technologies · doi:10.1002/pat.3522 · Cited by 421
Sustainable routes to polyurethane precursors
Kreye, O., Mutlu, H., & Meier, M. A. R. (2013) · Green Chemistry · doi:10.1039/c3gc40440d · Cited by 416
Chemical modification of tannins to elaborate aromatic biobased macromolecular architectures
Arbenz, A., & Avérous, L. (2015) · Green Chemistry · doi:10.1039/c5gc00282f · Cited by 409
Self-citationProgress in Study of Non-Isocyanate Polyurethane
Guan, J., Song, Y., Lin, Y., Yin, X., Zuo, M., Zhao, Y., Tao, X., & Zheng, Q. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie101995j · Cited by 389
Fabris, M., Abbriano, R. M., Pernice, M., Sutherland, D. L., Commault, A. S., Hall, C. C., Labeeuw, L., McCauley, J. I., Kuzhiuparambil, U., Ray, P., et al. (2020) · Frontiers in Plant Science · doi:10.3389/fpls.2020.00279 · Cited by 382
Biobased polyurethanes for biomedical applications
Wendels, S., & Avérous, L. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.10.002 · Cited by 379
Self-citationEffect of foam density on the properties of water blown rigid polyurethane foam
Thirumal, M., Khastgir, D. K., Singha, N. K., Manjunath, B. S., & Naik, Y. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.27712 · Cited by 366
Recent Advances in Vegetable Oil‐Based Polyurethanes
Pfister, D. P., Xia, Y., & Larock, R. C. (2011) · ChemSusChem · doi:10.1002/cssc.201000378 · Cited by 363
Evaluation of biological degradation of polyurethanes
Magnin, A., Pollet, E., Phalip, V., & Avérous, L. (2020) · Biotechnology Advances · doi:10.1016/j.biotechadv.2019.107457 · Cited by 352
Self-citationFurandicarboxylic Acid (FDCA), A Versatile Building Block for a Very Interesting Class of Polyesters
de Jong, E., Dam, M. A., Sipos, L., & Gruter, G.-J. M. (2012) · ACS Symposium Series · doi:10.1021/bk-2012-1105.ch001 · Cited by 344
Structure and Properties of Polyurethanes Prepared from Triglyceride Polyols by Ozonolysis
Petrović, Z. S., Zhang, W., & Javni, I. (2005) · Biomacromolecules · doi:10.1021/bm049451s · Cited by 336
Carré, C., Ecochard, Y., Caillol, S., & Avérous, L. (2019) · ChemSusChem · doi:10.1002/cssc.201900737 · Cited by 309
Self-citationTannins: Prospectives and Actual Industrial Applications
Pizzi, A. (2019) · Biomolecules · doi:10.3390/biom9080344 · Cited by 300
Bio-based amines through sustainable heterogeneous catalysis
Pelckmans, M., Renders, T., Van de Vyver, S., & Sels, B. F. (2017) · Green Chemistry · doi:10.1039/c7gc02299a · Cited by 296
Biobased Polyamides: Recent Advances in Basic and Applied Research
Winnacker, M., & Rieger, B. (2016) · Macromolecular Rapid Communications · doi:10.1002/marc.201600181 · Cited by 294
Polyurethane Composite Foams in High-Performance Applications: A Review
Kausar, A. (2018) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2017.1329433 · Cited by 293
Optimization Study of Lignin Oxypropylation in View of the Preparation of Polyurethane Rigid Foams
Cateto, C. A., Barreiro, M. F., Rodrigues, A. E., & Belgacem, M. N. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie801251r · Cited by 279
The Lipid Handbook with CD-ROM
Gunstone, F. D., Harwood, J. L., & Harwood, J. L. (2007) · CRC Press eBooks · doi:10.1201/9781420009675 · Cited by 262
Physical Properties of Polyurethanes Produced from Polyols from Seed Oils: II. Foams
Narine, S. S., Kong, X., Bouzidi, L., & Sporns, P. (2007) · Journal of the American Oil Chemists' Society · doi:10.1007/s11746-006-1008-2 · Cited by 258
Increase in CFC-11 emissions from eastern China based on atmospheric observations
Rigby, M., Park, S., Saito, T., Western, L. M., Redington, A. L., Fang, X., Henne, S., Manning, A. J., Prinn, R. G., Dutton, G. S., et al. (2019) · Nature · doi:10.1038/s41586-019-1193-4 · Cited by 258
Enzymatic Synthesis of Biobased Polyesters and Polyamides
Jiang, Y., & Loos, K. (2016) · Polymers · doi:10.3390/polym8070243 · Cited by 257
The global warming potential—the need for an interdisciplinary retrial: An editorial comment
Shine, K. P. (2009) · Climatic Change · doi:10.1007/s10584-009-9647-6 · Cited by 256
Experimental study of the thermal conductivity of polyurethane foams
Zhang, H., Fang, W.-Z., Li, Y.-M., & Tao, W.-Q. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.12.057 · Cited by 249
Pan, X., & Saddler, J. N. (2013) · Biotechnology for Biofuels · doi:10.1186/1754-6834-6-12 · Cited by 242
Biomimetic Carbon Tube Aerogel Enables Super-Elasticity and Thermal Insulation
Zhan, H.-J., Wu, K.-J., Hu, Y.-L., Liu, J.-W., Li, H., Guo, X., Xu, J., Yang, Y., Yu, Z.-L., Gao, H.-L., et al. (2019) · Chem · doi:10.1016/j.chempr.2019.04.025 · Cited by 234
Renewable polyols for advanced polyurethane foams from diverse biomass resources
Furtwengler, P., & Avérous, L. (2018) · Polymer Chemistry · doi:10.1039/c8py00827b · Cited by 225
Self-citationKraft Lignin-Based Rigid Polyurethane Foam
Li, Y., & Ragauskas, A. J. (2012) · Journal of Wood Chemistry and Technology · doi:10.1080/02773813.2011.652795 · Cited by 223
Zhang, C., Li, J., Hu, Z., Zhu, F., & Huang, Y. (2012) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.04.031 · Cited by 221
Facile synthesis of bio-based reactive flame retardant from vanillin and guaiacol for epoxy resin
Liu, J., Dai, J., Wang, S., Peng, Y., Cao, L., & Liu, X. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.107926 · Cited by 216
Grignard, B., Thomassin, J.-M., Gennen, S., Poussard, L., Bonnaud, L., Raquez, J.-M., Dubois, P., Tran, M.-P., Park, C. B., Jerome, C., et al. (2016) · Green Chemistry · doi:10.1039/c5gc02723c · Cited by 214
Chemically Recyclable Biobased Polyurethanes
Schneiderman, D. K., Vanderlaan, M. E., Mannion, A. M., Panthani, T. R., Batiste, D. C., Wang, J. Z., Bates, F. S., Macosko, C. W., & Hillmyer, M. A. (2016) · ACS Macro Letters · doi:10.1021/acsmacrolett.6b00193 · Cited by 213
Polyols and Polyurethanes from the Liquefaction of Lignocellulosic Biomass
Hu, S., Luo, X., & Li, Y. (2014) · ChemSusChem · doi:10.1002/cssc.201300760 · Cited by 212
Hu, S., Wan, C., & Li, Y. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2011.09.125 · Cited by 212
Synthesis of isosorbide: an overview of challenging reactions
Dussenne, C., Delaunay, T., Wiatz, V., Wyart, H., Suisse, I., & Sauthier, M. (2017) · Green Chemistry · doi:10.1039/c7gc01912b · Cited by 208
Characterization of polyurethane foams from soybean oil
John, J., Bhattacharya, M., & Turner, R. B. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.11322 · Cited by 204
Scalable production of mechanically tunable block polymers from sugar
Xiong, M., Schneiderman, D. K., Bates, F. S., Hillmyer, M. A., & Zhang, K. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1404596111 · Cited by 203
Oxypropylation of Lignins and Preparation of Rigid Polyurethane Foams from the Ensuing Polyols
Nadji, H., Sillard, C., Belgacem, M. N., Benaboura, A., & Gandini, A. (2005) · Macromolecular Materials and Engineering · doi:10.1002/mame.200500200 · Cited by 200
Magnin, A., Pollet, E., Perrin, R., Ullmann, C., Persillon, C., Phalip, V., & Avérous, L. (2019) · Waste Management · doi:10.1016/j.wasman.2018.12.024 · Cited by 199
Self-citationBiotechnological production of limonene in microorganisms
Jongedijk, E., Cankar, K., Buchhaupt, M., Schrader, J., Bouwmeester, H., & Beekwilder, J. (2016) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-016-7337-7 · Cited by 198
Ghasemlou, M., Daver, F., Ivanova, E. P., & Adhikari, B. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.06.032 · Cited by 191
Malic acid production from renewables: a review
Kövilein, A., Kubisch, C., Cai, L., & Ochsenreither, K. (2020) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.6269 · Cited by 191
Role of Silicone Surfactant in Flexible Polyurethane Foam
Zhang, X. D., Macosko, C. W., Davis, H. T., Nikolov, A. D., & Wasan, D. T. (1999) · Journal of Colloid and Interface Science · doi:10.1006/jcis.1999.6233 · Cited by 189
Aeschelmann, F., & Carus, M. (2015) · Industrial Biotechnology · doi:10.1089/ind.2015.28999.fae · Cited by 188
Moncada, J., Tamayo, J. A., & Cardona, C. A. (2014) · Chemical Engineering Science · doi:10.1016/j.ces.2014.07.035 · Cited by 188
Zhang, S., Liu, X., Jin, X., Li, H., Sun, J. C., & Gu, X. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.02.034 · Cited by 180
Production of polyols via direct hydrolysis of kraft lignin: Effect of process parameters
Mahmood, N., Yuan, Z., Schmidt, J., & (Charles) Xu, C. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.03.199 · Cited by 178
Preparation and characterisation of rigid polyurethane foams using a rapeseed oil-based polyol
Zieleniewska, M., Leszczyński, M. K., Kurańska, M., Prociak, A., Szczepkowski, L., Krzyżowska, M., & Ryszkowska, J. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.05.081 · Cited by 176
A new way of creating cellular polyurethane materials: NIPU foams
Cornille, A., Dworakowska, S., Bogdal, D., Boutevin, B., & Caillol, S. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.01.034 · Cited by 175
Charlon, M., Heinrich, B., Matter, Y., Couzigné, E., Donnio, B., & Avérous, L. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.10.012 · Cited by 172
Self-citationNovel fatty acid based di-isocyanates towards the synthesis of thermoplastic polyurethanes
More, A. S., Lebarbé, T., Maisonneuve, L., Gadenne, B., Alfos, C., & Cramail, H. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.12.013 · Cited by 171
Laurichesse, S., Huillet, C., & Avérous, L. (2014) · Green Chem. · doi:10.1039/c4gc00596a · Cited by 171
Self-citationEngineering plastics from lignin. I. Synthesis of hydroxypropyl lignin
Wu, L. C. ‐., & Glasser, W. G. (1984) · Journal of Applied Polymer Science · doi:10.1002/app.1984.070290408 · Cited by 171
Conversion of Lignin into Bio-Based Chemicals and Materials
Xu, C. C., & Ferdosian, F. (2017) · Green chemistry and sustainable technology · doi:10.1007/978-3-662-54959-9 · Cited by 170
Room temperature flexible isocyanate-free polyurethane foams
Cornille, A., Guillet, C., Benyahya, S., Négrell, C., Boutevin, B., & Caillol, S. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.05.032 · Cited by 169
Hejna, A., Kirpluks, M., Kosmela, P., Cabulis, U., Haponiuk, J., & Piszczyk, Ł. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.10.023 · Cited by 162
Toxicity of aliphatic amines: Structure-activity relationship
Greim, H., Bury, D., Klimisch, H.-J., Oeben-Negele, M., & Ziegler-Skylakakis, K. (1998) · Chemosphere · doi:10.1016/s0045-6535(97)00365-2 · Cited by 159
Carriço, C. S., Fraga, T., & Pasa, V. M. D. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.10.012 · Cited by 154
Polyurethanes from seed oil-based polyols: A review of synthesis, mechanical and thermal properties
Ghasemlou, M., Daver, F., Ivanova, E. P., & Adhikari, B. (2019) · Industrial Crops and Products · doi:10.1016/j.indcrop.2019.111841 · Cited by 154
Hojabri, L., Kong, X., & Narine, S. S. (2010) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.24114 · Cited by 151
Xu, M., Chen, Y., Qian, L., Wang, J., & Tang, S. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41006 · Cited by 149
PU foam derived from renewable sources: Perspective on properties enhancement: An overview
Agrawal, A., Kaur, R., & Walia, R. S. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.08.022 · Cited by 148
Highly functional polyols from castor oil for rigid polyurethanes
Ionescu, M., Radojčić, D., Wan, X., Shrestha, M. L., Petrovìć, Z. S., & Upshaw, T. A. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.06.006 · Cited by 146
Ethanol organosolv lignin-based rigid polyurethane foam reinforced with cellulose nanowhiskers
Li, Y., & Ragauskas, A. J. (2012) · RSC Advances · doi:10.1039/c2ra00646d · Cited by 143
Mateu-Royo, C., Navarro-Esbrí, J., Mota-Babiloni, A., Amat-Albuixech, M., & Molés, F. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.02.047 · Cited by 143
Kurańska, M., Pinto, J., Salach, K., Barreiro, M. F., & Prociak, A. (2019) · Industrial Crops and Products · doi:10.1016/j.indcrop.2019.111882 · Cited by 142
Biobased Monomers, Polymers, and Materials
Smith, P. B., & Gross, R. A. (2012) · ACS symposium series · doi:10.1021/bk-2012-1105 · Cited by 140
Flexible and Bio‐Based Nonisocyanate Polyurethane (NIPU) Foams
Blattmann, H., Lauth, M., & Mülhaupt, R. (2016) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600141 · Cited by 139
Cell Morphology and Mechanical Properties of Rigid Polyurethane Foam
Hawkins, M. C., O’Toole, B., & Jackovich, D. (2005) · Journal of Cellular Plastics · doi:10.1177/0021955x05053525 · Cited by 129
Quirino, R. L., Garrison, T. F., & Kessler, M. R. (2014) · Green Chemistry · doi:10.1039/c3gc41811a · Cited by 126
Singh, I., Samal, S. K., Mohanty, S., & NAYAK, S. K. (2019) · European Journal of Lipid Science and Technology · doi:10.1002/ejlt.201900225 · Cited by 125
Li, B., Zhou, M., Huo, W., Cai, D., Qin, P., Cao, H., & Tan, T. (2019) · Industrial Crops and Products · doi:10.1016/j.indcrop.2019.111887 · Cited by 123
Mahmood, N., Yuan, Z., Schmidt, J. A., & Xu, C. C. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.04.030 · Cited by 122
Modification of condensed tannins: from polyphenol chemistry to materials engineering
García, D. E., Glasser, W. G., Pizzi, A., Paczkowski, S. P., & Laborie, M. G. (2015) · New Journal of Chemistry · doi:10.1039/c5nj02131f · Cited by 120
Rigid polyurethane foam based on modified vegetable oil
Veronese, V. B., Menger, R. K., Forte, M. M. D. C., & Petzhold, C. L. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.33185 · Cited by 119
Duval, A., & Avérous, L. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01502 · Cited by 118
Self-citationKarunarathna, M. S., & Smith, R. C. (2020) · Sustainability · doi:10.3390/su12020734 · Cited by 116
Monie, F., Grignard, B., Thomassin, J., Méreau, R., Tassaing, T., Jérôme, C., & Detrembleur, C. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202006267 · Cited by 114
From gas release to foam synthesis, the second breath of blowing agents
Coste, G., Négrell, C., & Caillol, S. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.110029 · Cited by 114
Mahmood, N., Yuan, Z., Schmidt, J. A., Tymchyshyn, M., & Xu, C. C. (2016) · Green Chemistry · doi:10.1039/c5gc02876k · Cited by 113
Effect of diaminotoluene on the decomposition of polyurethane foam waste in superheated water
Dai, Z., Hatano, B., Kadokawa, J., & Tagaya, H. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00010-1 · Cited by 108
Polyols and Rigid Polyurethane Foams from Cashew Nut Shell Liquid
Ionescu, M., Wan, X., Bilić, N., & Petrovìć, Z. S. (2012) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0467-9 · Cited by 105
Synthesis of Diethylamine-Functionalized Soybean Oil
Biswas, A., Adhvaryu, A., Gordon, S. H., Erhan, S. Z., & Willett, J. L. (2005) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf050731o · Cited by 104
Boufi, S., Belgacem, M. N., Quillerou, J., & Gandini, A. (1993) · Macromolecules · doi:10.1021/ma00077a003 · Cited by 103
Alagi, P., Choi, Y. J., Seog, J., & Hong, S. C. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.04.027 · Cited by 103
Lutz, E. F. (1986) · Journal of Chemical Education · doi:10.1021/ed063p202 · Cited by 102
Polyurethanes from Isosorbide‐Based Diisocyanates
Zenner, M. D., Xia, Y., Chen, J. S., & Kessler, M. R. (2013) · ChemSusChem · doi:10.1002/cssc.201300126 · Cited by 102
Prociak, A., Kurańska, M., Cābulis, U., Ryszkowska, J., Leszczyńska, M., Uram, K., & Kirpļuks, M. (2018) · Industrial Crops and Products · doi:10.1016/j.indcrop.2018.04.046 · Cited by 101
Xue, B., Wen, J., & Sun, R.-C. (2015) · Materials · doi:10.3390/ma8020586 · Cited by 100
Effects of silicon surfactant in rigid polyurethane foams
Lim, H. S., Kim, S. H., & Kim, B. K. (2008) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2008.24 · Cited by 100
Çaylı, G., & Küsefoǧlu, S. H. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.28401 · Cited by 100
Ng, W. S., Lee, C. S., Chuah, C. H., & Cheng, S. F. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.11.066 · Cited by 99
Vegetable oils: a source of polyols for polyurethane materials
Maisonneuve, L., Chollet, G., Grau, É., & Cramail, H. (2016) · OCL · doi:10.1051/ocl/2016031 · Cited by 96
Lignin-based rigid polyurethane foams with improved biodegradation
Cateto, C. A., Barreiro, M. F., Ottati, C., Lopretti, M. I., Rodrigues, A. E., & Belgacem, M. N. (2013) · Journal of Cellular Plastics · doi:10.1177/0021955x13504774 · Cited by 93
Borowicz, M., Paciorek-Sadowska, J., Lubczak, J., & Czupryński, B. (2019) · Polymers · doi:10.3390/polym11111816 · Cited by 92
Zhang, X., Kim, Y., Elsayed, I., Taylor, M. S., Eberhardt, T. L., Hassan, E. B., & Shmulsky, R. (2019) · Industrial Crops and Products · doi:10.1016/j.indcrop.2019.111797 · Cited by 91
Polyols and Polyurethanes from Crude Algal Oil
Petrovìć, Z. S., Wan, X., Bilić, O., Zlatanić, A., Hong, J., Javni, I., Ionescu, M., Milić, J., & Degruson, D. (2013) · Journal of the American Oil Chemists Society · doi:10.1007/s11746-013-2245-9 · Cited by 90
Bachmann, F., Reimer, J., Ruppenstein, M., & Thiem, J. (2001) · Macromolecular Chemistry and Physics · doi:10.1002/1521-3935(20011101)202:17<3410::aid-macp3410>3.0.co;2-q · Cited by 89
Preparation of polyurethane foams using fractionated products in liquefied wood
Xu, J., Jiang, J., Hse, C., et al. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.40096 · Cited by 87
Linseed oil as a natural modifier of rigid polyurethane foams
Członka, S., Bertino, M. F., Kośny, J., Strąkowska, A., Masłowski, M., & Strzelec, K. (2018) · Industrial Crops and Products · doi:10.1016/j.indcrop.2018.02.019 · Cited by 87
Sustainable flame-retardant polyurethanes using renewable resources
Bhoyate, S. D., Ionescu, M., Kahol, P. K., & Gupta, R. K. (2018) · Industrial Crops and Products · doi:10.1016/j.indcrop.2018.07.025 · Cited by 86
Preparation and Evaluation of Glucose Based Non-Isocyanate Polyurethane Self-Blowing Rigid Foams
Xi, X., Pizzi, A., Gérardin‐Charbonnier, C., Lei, H., Chen, X., & Amirou, S. (2019) · Polymers · doi:10.3390/polym11111802 · Cited by 86
Thermally-responsive biopolyurethanes from a biobased diisocyanate
Calvo‐Correas, T., Santamaria‐Echart, A., Saralegi, A., Martin, L., Valea, Á., Corcuera, M. Á., & Eceiza, A. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.07.022 · Cited by 84
Open-cell rigid polyurethane bio-foams based on modified used cooking oil
Kurańska, M., Polaczek, K., Auguścik, M., Prociak, A., & Ryszkowska, J. (2020) · Polymer · doi:10.1016/j.polymer.2020.122164 · Cited by 83
Bio-based thermosetting epoxy foams from epoxidized soybean oil and rosin with enhanced properties
Huang, X., Yang, X., Liu, H., Shang, S., Cai, Z., & Wu, K. (2019) · Industrial Crops and Products · doi:10.1016/j.indcrop.2019.111540 · Cited by 82
Biobased Polyurethane Foams Based on New Polyol Architectures from Microalgae Oil
Peyrton, J., Chambaretaud, C., Sarbu, A., & Avérous, L. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c03758 · Cited by 82
Self-citationPérez-Sena, W. Y., Cai, X., Kébir, N., Vernières‐Hassimi, L., Serra, C. A., Salmi, T., & Leveneur, S. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.04.028 · Cited by 81
Rigid polyurethane foams made from high viscosity soy‐polyols
Fan, H., Tekeei, A., Suppes, G. J., & Hsieh, F. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.37508 · Cited by 80
Lligadas, G., Ronda, J. C., Galià, M., & Cádiz, V. (2006) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.21691 · Cited by 74
Khundamri, N., Aouf, C., Fulcrand, H., Dubreucq, É., & Tanrattanakul, V. (2018) · Industrial Crops and Products · doi:10.1016/j.indcrop.2018.11.062 · Cited by 74
Hu, Y., Tian, Y., Cheng, J., & Zhang, J. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06867 · Cited by 73
Shin, S., Kim, H., Liang, J., et al. (2019) · Journal of Applied Polymer Science · doi:10.1002/app.47916 · Cited by 72
Troev, K. D. (2000) · Polymer · doi:10.1016/s0032-3861(00)00054-9 · Cited by 71
Paruzel, A., Michałowski, S., Hodan, J., Horák, P., Prociak, A., & Beneš, H. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01197 · Cited by 71
Calvo‐Correas, T., Martin, L., Retegi, A., Gabilondo, N., Corcuera, M. Á., & Eceiza, A. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b01578 · Cited by 70
Berardi, U., & Madzarevic, J. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114440 · Cited by 69
Rigid polyurethane foams from a polyglycerol-based polyol
Piszczyk, Ł., Strankowski, M., Danowska, M., Hejna, A., & Haponiuk, J. T. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.05.012 · Cited by 68
Oxypropylation of sugar beet pulp. 1. Optimisation of the reaction
Pavier, C., & Gandini, A. (2000) · Industrial Crops and Products · doi:10.1016/s0926-6690(99)00039-4 · Cited by 68
Green Polyurethanes from Renewable Isocyanates and Biobased White Dextrins
Konieczny, J., & Loos, K. (2019) · Polymers · doi:10.3390/polym11020256 · Cited by 68
Acoustic evaluation of mycological biopolymer, an all-natural closed cell foam alternative
Pelletier, M., Holt, G., Wanjura, J., Greetham, L., Mcintyre, G., Bayer, E., & Kaplan-Bie, J. (2019) · Industrial crops and products (Print) · doi:10.1016/j.indcrop.2019.111533 · Cited by 68
Applications of Tannins in Industry
Singh, A. P., & Kumar, S. (2019) · IntechOpen eBooks · doi:10.5772/intechopen.85984 · Cited by 68
Ghosh, T., & Karak, N. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b00001 · Cited by 65
Gaidukova, G., Ivdre, A., Fridrihsone, A., Verovkins, A., Cābulis, U., & Gaidukovs, S. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.03.024 · Cited by 62
Olefin metathesis of fatty acids and vegetable oils
Vyshnavi, Y., Srikanth, K., Prasad, R. B. N., & Karuna, M. S. L. (2019) · Journal of Chemical Sciences · doi:10.1007/s12039-019-1615-8 · Cited by 62
Water Blown Soy Polyol-Based Polyurethane Foams of Different Rigidities
Banik, I., & Sain, M. M. (2007) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684407083955 · Cited by 61
Acik, G., Karabulut, H. R. F., Altınkök, Ç., & Karatavuk, A. O. (2019) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2019.04.015 · Cited by 61
Oxyalkylation of Condensed Tannin with Propylene Carbonate as an Alternative to Propylene Oxide
Duval, A., & Avérous, L. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00081 · Cited by 58
Self-citationPavier, C., & Gandini, A. (2000) · Carbohydrate Polymers · doi:10.1016/s0144-8617(99)00124-1 · Cited by 57
Polymers from renewable sources, 1. Diamines and diisocyanates containing difurylalkane moieties
Cawse, J. L., Stanford, J. L., & Still, R. H. (1984) · Die Makromolekulare Chemie · doi:10.1002/macp.1984.021850408 · Cited by 57
Kosmela, P., Hejna, A., Formela, K., Haponiuk, J. T., & Piszczyk, Ł. (2017) · Journal of Polymers and the Environment · doi:10.1007/s10924-017-1145-8 · Cited by 57
Malhotra, A., & Wasan, D. T. (1987) · Chemical Engineering Communications · doi:10.1080/00986448708911921 · Cited by 56
Boufi, S., Gandini, A., & Belgacem, M. N. (1995) · Polymer · doi:10.1016/0032-3861(95)99015-m · Cited by 56
Furtwengler, P., Perrin, R., Redl, A., & Avérous, L. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.10.020 · Cited by 56
Self-citationZhang, P., Liao, X., Ma, C., Li, Q., Li, A., & He, Y.-C. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b03510 · Cited by 56
Chemical recycling of reinforced polyurethane from the automotive industry
Modesti, M., & Simioni, F. (1996) · Polymer Engineering and Science · doi:10.1002/pen.10614 · Cited by 55
Chemical modifications of lignin for the preparation of macromers containing cyclic carbonates
Salanti, A., Zoia, L., & Orlandi, M. E. (2016) · Green Chemistry · doi:10.1039/c6gc01028h · Cited by 55
Life Cycle Assessment Framework To Support the Design of Biobased Rigid Polyurethane Foams
Manzardo, A., Marson, A., Roso, M., Boaretti, C., Modesti, M., Scipioni, A., & Lorenzetti, A. (2019) · ACS Omega · doi:10.1021/acsomega.9b02025 · Cited by 55
Hatakeyama, T., Matsumoto, Y., Asano, Y., et al. (2004) · Thermochimica Acta · doi:10.1016/j.tca.2002.12.002 · Cited by 54
Gustini, L., Noordover, B. A. J., Gehrels, C., Dietz, C. H. J. T., & Koning, C. E. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.12.025 · Cited by 54
Hyperbranched polyesters by polycondensation of fatty acid-based AB n -type monomers
Testud, B., Pintori, D., Grau, É., Taton, D., & Cramail, H. (2016) · Green Chemistry · doi:10.1039/c6gc02294d · Cited by 54
Fang, Z. D., Qiu, C., Ji, D., Yang, Z., Zhu, N., Meng, J., Hu, X., & Guo, K. (2019) · Journal of Agricultural and Food Chemistry · doi:10.1021/acs.jafc.8b05342 · Cited by 52
Ugarte, L., Gómez-Fernández, S., Peña-Rodríguez, C., Prociak, A., Corcuera, M. Á., & Eceiza, A. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01094 · Cited by 51
Multi-scale modelling of heat transfer in polyurethane foams
Ferkl, P., Toulec, M., Laurini, E., Pricl, S., Fermeglia, M., Auffarth, S., Eling, B., Settels, V., & Košek, J. (2017) · Chemical Engineering Science · doi:10.1016/j.ces.2017.06.035 · Cited by 48
Preparation of epoxy hardeners from waste rigid polyurethane foam and their application
Xue, S., Omoto, M., Hidai, T., & Imai, Y. (1995) · Journal of Applied Polymer Science · doi:10.1002/app.1995.070560202 · Cited by 46
Saffar, T., Bouafif, H., Braghiroli, F. L., Magdouli, S., Langlois, A., & Koubaa, A. (2019) · Waste and Biomass Valorization · doi:10.1007/s12649-019-00876-7 · Cited by 46
Glass transition temperature of polyurethane foams derived from lignin by controlled reaction rate
Hatakeyama, H., Hirogaki, A., Matsumura, H., & Hatakeyama, T. (2013) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-013-3132-1 · Cited by 45
New bio‐based epoxy materials and foams from microalgal oil
Négrell, C., Cornille, A., Nascimento, P. D. A., Robin, J., & Caillol, S. (2016) · European Journal of Lipid Science and Technology · doi:10.1002/ejlt.201600214 · Cited by 45
Chang, B. P., Thakur, S., Mohanty, A. K., & Misra, M. (2019) · Scientific Reports · doi:10.1038/s41598-019-52039-2 · Cited by 45
Neumann, C. N. D., Bulach, W., Rehahn, M., & Klein, R. (2011) · Macromolecular Rapid Communications · doi:10.1002/marc.201100205 · Cited by 44
Hejna, A., Kosmela, P., Kirpļuks, M., Cābulis, U., Klein, M., Haponiuk, J. T., & Piszczyk, Ł. (2017) · Journal of Polymers and the Environment · doi:10.1007/s10924-017-1086-2 · Cited by 44
Debuissy, T., Pollet, E., & Avérous, L. (2018) · ChemSusChem · doi:10.1002/cssc.201801700 · Cited by 44
Self-citationCrosslinking kinetics of the formation of lignin‐aminated polyol‐based polyurethane foam
Huo, S., Nie, M., Kong, Z., Wu, G., & Chen, J. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.35401 · Cited by 43
Zhang, J., Hori, N., & Takemura, A. (2020) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2020.109256 · Cited by 43
Belgacem, M. N., Quillerou, J., & Gandini, A. (1993) · European Polymer Journal · doi:10.1016/0014-3057(93)90151-5 · Cited by 42
Howell, B. A., Oberdorfer, K. L., & Ostrander, E. A. (2018) · International Journal of Polymer Science · doi:10.1155/2018/7237236 · Cited by 42
Xue, B., Huang, P.-L., Sun, Y., Li, X., & Sun, R. (2017) · RSC Advances · doi:10.1039/c6ra26318f · Cited by 41
Quantitative analysis of products from lignin depolymerisation in high-temperature water
Pérez, E., & Tuck, C. J. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.11.053 · Cited by 40
New Chemical Recycling Process for Polyurethanes
Wal, H. R. V. D. (1994) · Journal of Reinforced Plastics and Composites · doi:10.1177/073168449401300106 · Cited by 38
Wan, C., Zhang, G., & Zhang, F. (2020) · Cellulose · doi:10.1007/s10570-020-03003-1 · Cited by 38
Furtwengler, P., Boumbimba, R. M., Sarbu, A., & Avérous, L. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b00380 · Cited by 37
Self-citationArbenz, A., & Avérous, L. (2014) · RSC Advances · doi:10.1039/c4ra10691a · Cited by 34
Self-citationEvaluation of application potential of used cooking oils in the synthesis of polyol compounds
Kurańska, M., Banaś, J., Polaczek, K., Banaś, M., Prociak, A., Kuc, J., Uram, K., & Lubera, T. (2019) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2019.103506 · Cited by 34
Elaboration and Properties of Innovative Biobased PUIR Foams from Microalgae
Arbenz, A., Perrin, R., & Avérous, L. (2017) · Journal of Polymers and the Environment · doi:10.1007/s10924-017-0948-y · Cited by 33
Self-citationThermal and combustion features of rigid polyurethane biofoams filled with four forest‐based wastes
Delucis, R. D. Á., Magalhães, W. L. E., Petzhold, C. L., & Amico, S. C. (2018) · Polymer Composites · doi:10.1002/pc.24784 · Cited by 32
Kosmela, P., Gosz, K., Kazimierski, P., Hejna, A., Haponiuk, J. T., & Piszczyk, Ł. (2019) · Cellulose · doi:10.1007/s10570-019-02540-8 · Cited by 32
Jasiūnas, L., McKenna, S. T., Bridžiuvienė, D., & Miknius, L. (2020) · Journal of Polymers and the Environment · doi:10.1007/s10924-020-01686-y · Cited by 32
Contreras, J., Valdés, O., Mirabal‐Gallardo, Y., de la Torre, A. F., Navarrete, J., LISPERGUER, J., Durán‐Lara, E. F., Santos, L. S., Nachtigall, F. M., Cabrera‐Barjas, G., et al. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.109606 · Cited by 31
Polyurethane foams from alkaline lignin‐based polyether polyol
Li, H., Shao, Q., Luo, H., & Xu, J. H. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.43261 · Cited by 30
Poly(ether urethane)s from aromatic diisocyanates based on lignin‐derived phenolic acids
Kuhire, S. S., Nagane, S. S., & Wadgaonkar, P. P. (2017) · Polymer International · doi:10.1002/pi.5333 · Cited by 30
Zhang, G., Wu, Y., Chen, W., Han, D., Lin, X., Xu, G., & Zhang, Q. (2019) · Polymers · doi:10.3390/polym11091392 · Cited by 28
Two approaches for introduction of wheat straw lignin into rigid polyurethane foams
Arshanitsa, A., Paberza, A., Vēvere, L., Cābulis, U., & Телышева, Г. (2014) · AIP conference proceedings · doi:10.1063/1.4873806 · Cited by 27
Shao, H., Zhao, H., Xie, J., Qi, J., & Shupe, T. F. (2019) · International Journal of Polymer Science · doi:10.1155/2019/7231263 · Cited by 27
Cited by
Biobased vitrimers: Towards sustainable and adaptable performing polymer materials
Lucherelli, M. A., Duval, A., & Avérous, L. (2022) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2022.101515 · Cited by 291
Self-citationSustainable polyurethanes: toward new cutting-edge opportunities
Delavarde, A., Savin, G., Derkenne, P., Boursier, M., Morales-Cerrada, R., Nottelet, B., Pinaud, J., & Caillol, S. (2024) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2024.101805 · Cited by 275
Monie, F., Grignard, B., & Detrembleur, C. (2022) · ACS Macro Letters · doi:10.1021/acsmacrolett.1c00793 · Cited by 85
Insulative wood materials templated by wet foams
Ferreira, E. S., Dobrzanski, E., Tiwary, P., Agrawal, P., Chen, R., & Cranston, E. D. (2023) · Materials Advances · doi:10.1039/d2ma00852a · Cited by 14
Non-isocyanate polyurethane foams: where we stand and what comes next?
Grignard, B., Bourguignon, M., Monie, F., Vidil, T., Cramail, H., Perli, G., Sardon, H., Raquez, J.-M., Caillol, S., & Detrembleur, C. (2026) · Chemical Society Reviews · doi:10.1039/d5cs00144g · Cited by 12
Metadata
- Authors
- Peyrton, J., & Avérous, L.
- Venue
- Materials Science and Engineering: R: Reports
- Publisher
- Elsevier BV
- Published
- 2021-07
- Volume
- 145
- Pages
- 100608
- ISSN
- 0927-796X (ISSN-L)
- OpenAlex
- W3133755222
- Cited by
- 282
- References
- 211
- FWCI
- 13.77
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.