CoChat

Performance analysis of perovskite solar cells in 2013–2018 using machine-learning tools

Odabaşı, Çağla, Yıldırım, Ramazan · 2019 · Nano Energy
Cited by 150

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Abstract

This work presents a review and analysis of a database containing 1921 solar cell device performance data points extracted from 800 publications on the (organo)-lead-halide perovskite solar cell published between 2013 and 2018. The aim is to review the literature to capture the major patterns in the past and analyze the database using machine learning tools to develop heuristics and models to predict the cell performance. The factors related to the fabrication methods of metal-halide perovskite cells like the utilization of mixed cation perovskites, solvent engineering (such as mixed DMF+DMSO solvent), use of chlorobenzene as anti-solvent, employing two or three times spinning as well as factors pertaining the device architecture like utilization of LiTFSI+TBP+FK209 as hole transport layer (HTL) additive and tin oxide (SnO2t) as electron transport layer (ETL) emerge as the significant factors leading to highly efficient device of regular (n-i-p) architecture devices. The use of poly-triarylamine (PTAA) as HTL, mixed cation perovskite and bathocuproine (BCP) as ETL interlayer seems to be important for inverted (p-i-n) cells. It is also clear that the evolution of maximum efficiencies obeys the S-shape logistic curve. Two local S-shaped patterns exist in the data; the first one seems to be completed in 2014–2015, the second curve, which apparently started due to the effective utilization of solvents and anti-solvents, covers the later years, and it is reaching its maturity; the last two records may be indicators of a new trend.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.nanoen.2018.11.069

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 1 references

Research works printed but not linked: 178

  1. Günay, 2013, Knowledge extraction from catalysis of the past: a case of selective CO oxidation over noble metal catalysts between 2000 and 2012, ChemCatChem, 5, 1395, 10.1002/cctc.201200665 · DOI
  2. Odabaşı, 2014, Knowledge extraction for water gas shift reaction over noble metal catalysts from publications in the literature between 2002 and 2012, Int. J. Hydrog. Energy, 39, 5733, 10.1016/j.ijhydene.2014.01.160 · DOI
  3. Baysal, 2017, Decision tree analysis of past publications on catalytic steam reforming to develop heuristics for high performance: a statistical review, Int. J. Hydrog. Energy, 42, 243, 10.1016/j.ijhydene.2016.10.003 · DOI
  4. Şener, 2018, Statistical review of dry reforming of methane literature using decision tree and artificial neural network analysis, Catal. Today, 299, 289, 10.1016/j.cattod.2017.05.012 · DOI
  5. Tapan, 2016, Constructing global models from past publications to improve design and operating conditions for direct alcohol fuel cells, Chem. Eng. Res. Des., 105, 162, 10.1016/j.cherd.2015.11.018 · DOI
  6. Alper Tapan, 2016, Analysis of past experimental data in literature to determine conditions for high performance in biodiesel production, Biofuels, Bioprod. Biorefin., 10, 422, 10.1002/bbb.1650 · DOI
  7. Chesterfield, 2009, Evidence-based design and optimisation of titania photocatalysts via artificial neural network analysis, J. Chem. Eng. Jpn., 42, s185, 10.1252/jcej.08we210 · doi:10.1252/jcej.08we210
  8. Kondratenko, 2015, Developing catalytic materials for the oxidative coupling of methane through statistical analysis of literature data, Catal. Sci. Technol., 5, 1668, 10.1039/C4CY01443J · DOI
  9. Chen, 2016, Origin of J–V Hysteresis in Perovskite Solar Cells. The, J. Phys. Chem. Lett., J. Phys. Chem. Lett., 7, 905, 10.1021/acs.jpclett.6b00215 · DOI · Paper page
  10. Correa-Baena, 2017, The rapid evolution of highly efficient perovskite solar cells, Energ, Environ. Sci., 10, 710
  11. Zimmermann, 2016, Characterization of perovskite solar cells: towards a reliable measurement protocol, APL Mater., 4, 091901, 10.1063/1.4960759 · doi:10.1063/1.4960759
  12. Liaw, 2002, Classification and regression by random forest, R. News, 2, 18
  13. Hahsler, 2011, Analyzing interesting patterns from large transaction datasets, J. Mach. Learn Res., 12, 1977
  14. Ye, 2016, Recent advancements in perovskite solar cells: flexibility, stability and large scale, J. Mater. Chem. A, 4, 6755, 10.1039/C5TA09661H · DOI · Paper page
  15. K.T.A. Kojima, Y. Shirai, T. Miyasaka, Novel Photoelectrochemical Cell with Mesoscopic Electrodes Sensitized by Lead-Halide Compounds (2), 210th ECS Meeting, Cancun, Mexico, 2006. · DOI
  16. K.T.A. Kojima, Y. Shirai, T. Miyasaka, Novel Photoelectrochemical Cell with Mesoscopic Electrodes Sensitized by Lead-halide Compounds (5), 212th ECS Meeting, Washington, USA, 2007. · doi:10.1149/ma2007-02/8/352
  17. Im, 2011, 6.5% efficient perovskite quantum-dot-sensitized solar cell, Nanoscale, 3, 4088, 10.1039/c1nr10867k · DOI · Paper page
  18. Kim, 2012, Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%, Sci. Rep., 2, 591, 10.1038/srep00591 · DOI · Paper page
  19. Lee, 2012, Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites, Science, 338, 643, 10.1126/science.1228604 · DOI · Paper page
  20. Burschka, 2013, Sequential deposition as a route to high-performance perovskite-sensitized solar cells, Nature, 499, 316, 10.1038/nature12340 · DOI · Paper page
  21. Liu, 2013, Efficient planar heterojunction perovskite solar cells by vapour deposition, Nature, 501, 395, 10.1038/nature12509 · DOI · Paper page
  22. Zhou, 2014, Interface engineering of highly efficient perovskite solar cells, Science, 345, 542, 10.1126/science.1254050 · DOI · Paper page
  23. Yang, 2015, High-performance photovoltaic perovskite layers fabricated through intramolecular exchange, Science, 348, 1234, 10.1126/science.aaa9272 · DOI · Paper page
  24. Saliba, 2016, Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency, Energy Environ. Sci., 9, 1989, 10.1039/C5EE03874J · DOI · Paper page
  25. Yang, 2017, Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells, Science, 356, 1376, 10.1126/science.aan2301 · DOI · Paper page
  26. Jeon, 2018, A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells, Nat. Energy, 10.1038/s41560-018-0200-6 · DOI · Paper page
  27. Meng, 2016, Recent advances in the inverted planar structure of perovskite solar cells, Acc. Chem. Res., 49, 155, 10.1021/acs.accounts.5b00404 · DOI · Paper page
  28. Jeng, 2013, CH3NH3PbI3 perovskite/fullerene planar-heterojunction hybrid solar cells, Adv. Mater., 25, 3727, 10.1002/adma.201301327 · DOI · Paper page
  29. Liang, 2014, Additive enhanced crystallization of solution-processed perovskite for highly efficient planar-heterojunction solar cells, Adv. Mater., 26, 3748, 10.1002/adma.201400231 · DOI · Paper page
  30. Xiao, 2014, Efficient, high yield perovskite photovoltaic devices grown by interdiffusion of solution-processed precursor stacking layers, Energ, Environ. Sci., 7, 2619
  31. Chiang, 2014, Planar heterojunction perovskite/PC71BM solar cells with enhanced open-circuit voltage via a (2/1)-step spin-coating process, J. Mater. Chem. A, 2, 15897, 10.1039/C4TA03674C · DOI · Paper page
  32. Nie, 2015, High-efficiency solution-processed perovskite solar cells with millimeter-scale grains, Science, 347, 522, 10.1126/science.aaa0472 · DOI · Paper page
  33. Bi, 2015, Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells, Nat. Commun., 6, 7747, 10.1038/ncomms8747 · DOI · Paper page
  34. Zhu, 2016, Enhanced efficiency and stability of inverted perovskite solar cells using highly crystalline SnO2 nanocrystals as the robust electron-transporting layer, Adv. Mater., 28, 6478, 10.1002/adma.201600619 · DOI · Paper page
  35. Rao, 2016, A 19.0% efficiency achieved in CuOx-based inverted CH3NH3PbI3−xClx solar cells by an effective Cl doping method, Nano Energy, 27, 51, 10.1016/j.nanoen.2016.06.044 · DOI · Paper page
  36. Luo, 2017, Dual-source precursor approach for highly efficient inverted planar heterojunction perovskite solar cells, Adv. Mater., 29, 1604758, 10.1002/adma.201604758 · DOI · Paper page
  37. Luo, 2018, Enhanced photovoltage for inverted planar heterojunction perovskite solar cells, Science, 360, 1442, 10.1126/science.aap9282 · DOI · Paper page
  38. Stranks, 2013, Electron-hole diffusion lengths exceeding 1 μm in an organometal trihalide perovskite absorber, Science, 342, 341, 10.1126/science.1243982 · DOI · Paper page
  39. Barrows, 2014, Efficient planar heterojunction mixed-halide perovskite solar cells deposited via spray-deposition, Energ. Environ. Sci., 7, 2944, 10.1039/C4EE01546K · DOI · Paper page
  40. Docampo, 2014, Solution deposition-conversion for planar heterojunction mixed halide perovskite solar cells, Adv. Energy Mater., 4, 1400355, 10.1002/aenm.201400355 · DOI · Paper page
  41. Qing, 2015, Chlorine incorporation for enhanced performance of planar perovskite solar cell based on lead acetate precursor, ACS Appl. Mater. Interfaces, 7, 23110, 10.1021/acsami.5b06819 · doi:10.1021/acsami.5b06819
  42. Stone, 2018, Transformation from crystalline precursor to perovskite in PbCl2-derived MAPbI3, Nat. Commun., 9, 3458, 10.1038/s41467-018-05937-4 · DOI
  43. Pang, 2014, NH2CH═NH2PbI3: an alternative organolead iodide perovskite sensitizer for mesoscopic solar cells, Chem. Mater., 26, 1485, 10.1021/cm404006p · DOI · Paper page
  44. Eperon, 2014, Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells, Energ. Environ. Sci., 7, 982, 10.1039/c3ee43822h · DOI · Paper page
  45. Wang, 2015, Compound for highly efficient solution-processed perovskite solar cells, Adv. Funct. Mater., 25, 1120, 10.1002/adfm.201404007 · DOI · Paper page
  46. Pellet, 2014, Mixed-organic-cation perovskite photovoltaics for enhanced solar-light harvesting, Angew. Chem., Int. Ed., 53, 3151, 10.1002/anie.201309361 · DOI · Paper page
  47. Jeon, 2015, Compositional engineering of perovskite materials for high-performance solar cells, Nature, 517, 476, 10.1038/nature14133 · DOI · Paper page
  48. Kulbak, 2016, Cesium enhances long-term stability of lead bromide perovskite-based solar cells, J. Phys. Chem. Lett., 7, 167, 10.1021/acs.jpclett.5b02597 · DOI · Paper page
  49. Chang, 2016, Carbon-Based CsPbBr3 perovskite solar cells: all-ambient processes and high thermal stability, ACS Appl. Mater. Interfaces, 8, 33649, 10.1021/acsami.6b11393 · DOI · Paper page
  50. Swarnkar, 2016, Quantum dot–induced phase stabilization of α-CsPbI3 perovskite for high-efficiency photovoltaics, Science, 354, 92, 10.1126/science.aag2700 · DOI · Paper page
  51. Choi, 2014, Cesium-doped methylammonium lead iodide perovskite light absorber for hybrid solar cells, Nano Energy, 7, 80, 10.1016/j.nanoen.2014.04.017 · DOI · Paper page
  52. Lee, 2015, Formamidinium and cesium hybridization for photo- and moisture-stable perovskite solar cell, Adv. Energy Mater., 5, 1501310, 10.1002/aenm.201501310 · DOI · Paper page
  53. Niu, 2016, Controlled orientation of perovskite films through mixed cations toward high performance perovskite solar cells, Nano Energy, 27, 87, 10.1016/j.nanoen.2016.06.053 · doi:10.1016/j.nanoen.2016.06.053
  54. Zhang, 2018, Theoretical lifetime extraction and experimental demonstration of stable cesium-containing tri-cation perovskite solar cells with high efficiency, Electrochim. Acta, 265, 98, 10.1016/j.electacta.2017.11.182 · doi:10.1016/j.electacta.2017.11.182
  55. McMeekin, 2016, A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells, Science, 351, 151, 10.1126/science.aad5845 · DOI · Paper page
  56. Fengjun, 2017, Applications of cesium in the perovskite solar cells, J. Semicond., 38, 011003, 10.1088/1674-4926/38/1/011003 · doi:10.1088/1674-4926/38/1/011003
  57. Sheng, 2018, Mixed (5-AVA)xMA1−xPbI3−y(BF4)y perovskites enhance the photovoltaic performance of hole-conductor-free printable mesoscopic solar cells, J. Mater. Chem. A, 6, 2360, 10.1039/C7TA09604F · doi:10.1039/c7ta09604f
  58. Bat-El, 2017, High efficiency and high open circuit voltage in Quasi 2D perovskite based solar cells, Adv. Funct. Mater., 27, 1604733, 10.1002/adfm.201604733 · DOI · Paper page
  59. Yang, 2017, Recent advances in perovskite solar cells: efficiency, stability and lead-free perovskite, J. Mater. Chem. A, 5, 11462, 10.1039/C7TA00366H · DOI · Paper page
  60. Konstantakou, 2017, A critical review on tin halide perovskite solar cells, J. Mater. Chem. A, 5, 11518, 10.1039/C7TA00929A · DOI · Paper page
  61. Hao, 2014, Anomalous band gap behavior in mixed Sn and Pb perovskites enables broadening of absorption spectrum in solar cells, J. Am. Chem. Soc., 136, 8094, 10.1021/ja5033259 · DOI · Paper page
  62. Park, 2015, Bismuth based hybrid perovskites A3Bi2I9 (A: methylammonium or Cesium) for solar cell application, Adv. Mater., 27, 6806, 10.1002/adma.201501978 · DOI · Paper page
  63. Sun, 2016, Theoretical insights into a potential lead-free hybrid perovskite: substituting Pb2+ with Ge2+, Nanoscale, 8, 1503, 10.1039/C5NR05337D · DOI · Paper page
  64. Jacobsson, 2015, Goldschmidt's rules and strontium replacement in lead halogen perovskite solar cells: theory and preliminary experiments on CH3NH3SrI3, J. Phys. Chem. C., 119, 25673, 10.1021/acs.jpcc.5b06436 · DOI · Paper page
  65. Uribe, 2016, CH3NH3CaI3 perovskite: synthesis, characterization, and first-principles studies, J. Phys. Chem. C., 120, 16393, 10.1021/acs.jpcc.6b04207 · doi:10.1021/acs.jpcc.6b04207
  66. Shi, 2015, CH3NH3PbI3 and CH3NH3PbI3–xClx in planar or mesoporous perovskite solar cells: comprehensive insight into the dependence of performance on architecture, J. Phys. Chem. C., 119, 15868, 10.1021/acs.jpcc.5b02784 · doi:10.1021/acs.jpcc.5b02784
  67. Bi, 2013, Using a two-step deposition technique to prepare perovskite (CH3NH3PbI3) for thin film solar cells based on ZrO2 and TiO2 mesostructures, RSC Adv., 3, 18762, 10.1039/c3ra43228a · DOI · Paper page
  68. Park, 2016, Methodologies for high efficiency perovskite solar cells, Nano Converg., 3, 15, 10.1186/s40580-016-0074-x · DOI
  69. Kim, 2014, Mixed solvents for the optimization of morphology in solution-processed, inverted-type perovskite/fullerene hybrid solar cells, Nanoscale, 6, 6679, 10.1039/c4nr00130c · DOI · Paper page
  70. Ahn, 2015, Highly reproducible perovskite solar cells with average efficiency of 18.3% and best efficiency of 19.7% fabricated via lewis base adduct of lead(II) Iodide, J. Am. Chem. Soc., 137, 8696, 10.1021/jacs.5b04930 · DOI · Paper page
  71. Mali, 2015, Highly porous Zinc Stannate (Zn2SnO4) nanofibers scaffold photoelectrodes for efficient methyl ammonium halide perovskite solar cells, Sci. Rep., 5, 11424, 10.1038/srep11424 · doi:10.1038/srep11424
  72. Li, 2015, Mesoporous SnO2 nanoparticle films as electron-transporting material in perovskite solar cells, RSC Adv., 5, 28424, 10.1039/C5RA01540E · doi:10.1039/c5ra01540e
  73. Kim, 2016, Nucleation and growth control of HC(NH2)2PbI3 for planar perovskite solar cell, J. Phys. Chem. C., 120, 11262, 10.1021/acs.jpcc.6b02443 · doi:10.1021/acs.jpcc.6b02443
  74. Ke, 2016, Employing lead thiocyanate additive to reduce the hysteresis and boost the fill factor of planar perovskite solar cells, Adv. Mater., 28, 5214, 10.1002/adma.201600594 · DOI · Paper page
  75. Li, 2015, Controllable grain morphology of perovskite absorber film by molecular self-assembly toward efficient solar cell exceeding 17%, J. Am. Chem. Soc., 137, 10399, 10.1021/jacs.5b06444 · DOI · Paper page
  76. Ahmadian-Yazdi, 2016, Effects of process parameters on the characteristics of mixed-halide perovskite solar cells fabricated by one-step and two-step sequential coating, Nanoscale Res. Lett., 11, 408, 10.1186/s11671-016-1601-8 · doi:10.1186/s11671-016-1601-8
  77. Xiao, 2014, Procedure for highly efficient lead iodide perovskite thin-film solar cells, Angew. Chem., Int. Ed., 53, 9898, 10.1002/anie.201405334 · DOI · Paper page
  78. Jung, 2014, Low-temperature processed high-performance flexible perovskite solar cells via rationally optimized solvent washing treatments, RSC Adv., 4, 62971, 10.1039/C4RA13212B · DOI · Paper page
  79. Ye, 2016, Effective and reproducible method for preparing low defects perovskite film toward highly photoelectric properties with large fill factor by shaping capping layer, Sol. Energy, 136, 505, 10.1016/j.solener.2016.07.034 · doi:10.1016/j.solener.2016.07.034
  80. Salim, 2015, Perovskite-based solar cells: impact of morphology and device architecture on device performance,m, J. Mater. Chem. A, 3, 8943, 10.1039/C4TA05226A · DOI · Paper page
  81. Saliba, 2014, Influence of thermal processing protocol upon the crystallization and photovoltaic performance of organic–inorganic lead trihalide perovskites, J. Phys. Chem. C., 118, 17171, 10.1021/jp500717w · DOI · Paper page
  82. Aharon, 2015, Temperature dependence of hole conductor free formamidinium lead iodide perovskite based solar cells, J. Mater. Chem. A, 3, 9171, 10.1039/C4TA05149A · DOI · Paper page
  83. Khatiwada, 2015, Efficient perovskite solar cells by temperature control in single and mixed halide precursor solutions and films, J. Phys. Chem. C., 119, 25747, 10.1021/acs.jpcc.5b08294 · DOI
  84. Harry, 2017, Effects of ambient humidity on the optimum annealing time of mixed-halide perovskite solar cells, Nanotechnology, 28, 114004, 10.1088/1361-6528/aa5bec · doi:10.1088/1361-6528/aa5bec
  85. Su, 2017, Temperature-modulated crystal growth and performance for highly reproducible and efficient perovskite solar cells, Phys. Chem. Chem. Phys., 19, 13147, 10.1039/C7CP00563F · doi:10.1039/c7cp00563f
  86. Song, 2015, Unraveling film transformations and device performance of planar perovskite solar cells, Nano Energy, 12, 494, 10.1016/j.nanoen.2015.01.025 · doi:10.1016/j.nanoen.2015.01.025
  87. Zheng, 2017, Effects of precursor concentration and annealing temperature on CH3NH3PbI3 film crystallization and photovoltaic performance, J. Phys. Chem. Solids, 107, 55, 10.1016/j.jpcs.2017.03.020 · doi:10.1016/j.jpcs.2017.03.020
  88. Chen, 2015, Annealing effects on high-performance CH3NH3PbI3 perovskite solar cells prepared by solution-process, Sol. Energy, 122, 1047, 10.1016/j.solener.2015.10.019 · doi:10.1016/j.solener.2015.10.019
  89. Amalie, 2014, Effect of annealing temperature on film morphology of organic–inorganic hybrid pervoskite solid-state solar cells, Adv. Funct. Mater., 24, 3250, 10.1002/adfm.201304022 · DOI · Paper page
  90. Zhang, 2016, Film-through large perovskite grains formation via a combination of sequential thermal and solvent treatment, J. Mater. Chem. A, 4, 8554, 10.1039/C6TA03115C · DOI
  91. You, 2014, Moisture assisted perovskite film growth for high performance solar cells, Appl. Phys. Lett., 105, 183902, 10.1063/1.4901510 · DOI · Paper page
  92. Gangishetty, 2016, Effect of relative humidity on crystal growth, device performance and hysteresis in planar heterojunction perovskite solar cells, Nanoscale, 8, 6300, 10.1039/C5NR04179A · doi:10.1039/c5nr04179a
  93. Raga, 2015, Influence of air annealing on high efficiency planar structure perovskite solar cells, Chem. Mater., 27, 1597, 10.1021/cm5041997 · DOI · Paper page
  94. Eperon, 2015, The importance of moisture in hybrid lead halide perovskite thin film fabrication, ACS Nano, 9, 9380, 10.1021/acsnano.5b03626 · DOI · Paper page
  95. Hsu, 2014, Two-step thermal annealing improves the morphology of spin-coated films for highly efficient perovskite hybrid photovoltaics, Nanoscale, 6, 10281, 10.1039/C4NR02751E · doi:10.1039/c4nr02751e
  96. Huang, 2015, Multi-step slow annealing perovskite films for high performance planar perovskite solar cells, Sol. Energy Mater. Sol. Cells, 141, 377, 10.1016/j.solmat.2015.06.018 · doi:10.1016/j.solmat.2015.06.018
  97. Kim, 2017, High-temperature–short-time annealing process for high-performance large-area perovskite solar cells, ACS Nano, 11, 6057, 10.1021/acsnano.7b02015 · DOI · Paper page
  98. Cao, 2018, High annealing temperature induced rapid grain coarsening for efficient perovskite solar cells, Colloid Interface Sci., 524, 483, 10.1016/j.jcis.2018.04.019 · doi:10.1016/j.jcis.2018.04.019
  99. Kim, 2013, Mechanism of carrier accumulation in perovskite thin-absorber solar cells, Nat. Commun., 4, 2242, 10.1038/ncomms3242 · DOI · Paper page
  100. Ball, 2013, Low-temperature processed meso-superstructured to thin-film perovskite solar cells, Energ. Environ. Sci., 6, 1739, 10.1039/c3ee40810h · DOI · Paper page
  101. Ujwal Kumar, 2017, Halide perovskite solar cells using monocrystalline TiO2 nanorod arrays as electron transport layers: impact of nanorod morphology, Nanotechnology, 28, 274001, 10.1088/1361-6528/aa75ab · DOI
  102. Pathak, 2014, Performance and stability enhancement of dye-sensitized and perovskite solar cells by Al doping of TiO2, Adv. Funct. Mater., 24, 6046, 10.1002/adfm.201401658 · DOI · Paper page
  103. Manseki, 2014, Mg-doped TiO2 nanorods improving open-circuit voltages of ammonium lead halide perovskite solar cells, RSC Adv., 4, 9652, 10.1039/C3RA47870J · DOI
  104. Han, 2015, Reduced graphene oxide/mesoporous TiO2 nanocomposite based perovskite solar cells, ACS Appl. Mater. Interfaces, 7, 23521, 10.1021/acsami.5b06171 · DOI · Paper page
  105. Bera, 2014, Perovskite oxide SrTiO3 as an efficient electron transporter for hybrid perovskite solar cells, J. Phys. Chem. C., 118, 28494, 10.1021/jp509753p · DOI · Paper page
  106. Bera, 2015, Fast crystallization and improved stability of perovskite solar cells with Zn2SnO4 electron transporting layer: interface matters, ACS Appl. Mater. Interfaces, 7, 28404, 10.1021/acsami.5b09182 · DOI
  107. Yu, 2016, Enhanced photovoltaic performance of perovskite solar cells with mesoporous SiO2 scaffolds, J. Power Sources, 325, 534, 10.1016/j.jpowsour.2016.05.060 · doi:10.1016/j.jpowsour.2016.05.060
  108. Qin, 2014, Yttrium-substituted nanocrystalline TiO2 photoanodes for perovskite based heterojunction solar cells, Nanoscale, 6, 1508, 10.1039/C3NR05884K · doi:10.1039/c3nr05884k
  109. Nagaoka, 2015, Zr incorporation into TiO2 electrodes reduces hysteresis and improves performance in hybrid perovskite solar cells while increasing carrier lifetimes, J. Phys. Chem. Lett., 6, 669, 10.1021/jz502694g · doi:10.1021/jz502694g
  110. Jeong, 2016, A tailored TiO2 electron selective layer for high-performance flexible perovskite solar cells via low temperature UV process, Nano Energy, 28, 380, 10.1016/j.nanoen.2016.09.004 · DOI
  111. Zuo, 2015, Enhanced photovoltaic performance of CH3NH3PbI3 perovskite solar cells through interfacial engineering using self-assembling monolayer, J. Am. Chem. Soc., 137, 2674, 10.1021/ja512518r · DOI · Paper page
  112. Wojciechowski, 2015, C60 as an efficient n-type compact layer in perovskite solar cells, J. Phys. Chem. Lett., 6, 2399, 10.1021/acs.jpclett.5b00902 · DOI · Paper page
  113. Yoon, 2016, Hysteresis-free low-temperature-processed planar perovskite solar cells with 19.1% efficiency, Energ. Environ. Sci., 9, 2262, 10.1039/C6EE01037G · DOI · Paper page
  114. Fernandes, 2016, C.F.d.O. Graeff, Nb2O5 hole blocking layer for hysteresis-free perovskite solar cells, Mater. Lett., 181, 103, 10.1016/j.matlet.2016.06.018 · doi:10.1016/j.matlet.2016.06.018
  115. Liu, 2015, Low-temperature, solution processed metal sulfide as an electron transport layer for efficient planar perovskite solar cells, J. Mater. Chem. A, 3, 11750, 10.1039/C5TA01200G · doi:10.1039/c5ta01200g
  116. Ke, 2015, Efficient hole-blocking layer-free planar halide perovskite thin-film solar cells, Nat. Commun., 6, 6700, 10.1038/ncomms7700 · DOI · Paper page
  117. Ke, 2016, Cooperative tin oxide fullerene electron selective layers for high-performance planar perovskite solar cells, J. Mater. Chem. A, 4, 14276, 10.1039/C6TA05095F · DOI · Paper page
  118. Xia, 2015, Efficiency Enhancement of inverted structure perovskite solar cells via oleamide doping of PCBM electron transport layer, ACS Appl. Mater. Interfaces, 7, 13659, 10.1021/acsami.5b03525 · DOI
  119. Kakavelakis, 2017, Efficient and highly air stable planar inverted perovskite solar cells with reduced graphene oxide doped PCBM electron transporting layer, Adv. Energy Mater., 7, 1602120, 10.1002/aenm.201602120 · DOI · Paper page
  120. Bai, 2015, High performance inverted structure perovskite solar cells based on a PCBM: polystyrene blend electron transport layer, J. Mater. Chem. A, 3, 9098, 10.1039/C4TA05309E · DOI · Paper page
  121. Wang, 2014, Large fill-factor bilayer iodine perovskite solar cells fabricated by a low-temperature solution-process, Energ. Environ. Sci., 7, 2359, 10.1039/C4EE00233D · DOI · Paper page
  122. Malinkiewicz, 2014, Metal-Oxide-Free methylammonium lead iodide perovskite-based solar cells: the influence of organic charge transport layers, Adv. Energy Mater., 4, 1400345, 10.1002/aenm.201400345 · DOI
  123. Gu, 2016, An azaacene derivative as promising electron-transport layer for inverted perovskite solar cells, Chem. - Asian J., 11, 2135, 10.1002/asia.201600856 · DOI · Paper page
  124. Gu, 2017, Pushing up the efficiency of planar perovskite solar cells to 18.2% with organic small molecules as the electron transport layer, J. Mater. Chem. A, 5, 7339, 10.1039/C7TA01764B · DOI · Paper page
  125. Kojima, 2009, Organometal halide perovskites as visible-light sensitizers for photovoltaic cells, J. Am. Chem. Soc., 131, 6050, 10.1021/ja809598r · DOI · Paper page
  126. Burschka, 2011, Tris(2-(1H-pyrazol-1-yl)pyridine)cobalt(III) as p-Type dopant for organic semiconductors and its application in highly efficient solid-state dye-sensitized solar cells, J. Am. Chem. Soc., 133, 18042, 10.1021/ja207367t · DOI · Paper page
  127. Burschka, 2013, Co(III) complexes as p-Dopants in solid-state dye-sensitized solar cells, Chem. Mater., 25, 2986, 10.1021/cm400796u · DOI · Paper page
  128. Noh, 2013, Nanostructured TiO2/CH3NH3PbI3 heterojunction solar cells employing spiroOMeTAD/Co-complex as hole-transporting material, J. Mater. Chem. A, 1, 11842, 10.1039/c3ta12681a · DOI · Paper page
  129. Koh, 2014, Cobalt dopant with deep redox potential for organometal halide hybrid solar cells, ChemSusChem, 7, 1909, 10.1002/cssc.201400081 · doi:10.1002/cssc.201400081
  130. Badia, 2014, New iridium complex as additive to the spiro-OMeTAD in perovskite solar cells with enhanced stability, APL Mater., 2, 081507, 10.1063/1.4890545 · doi:10.1063/1.4890545
  131. Chen, 2015, Low-cost solution-processed copper iodide as an alternative to PEDOT: PSS hole transport layer for efficient and stable inverted planar heterojunction perovskite solar cells, J. Mater. Chem. A, 3, 19353, 10.1039/C5TA05286F · DOI · Paper page
  132. Chen, 2017, Cu(II) Complexes as p-Type dopants in efficient perovskite solar cells, ACS Energy Lett., 2, 497, 10.1021/acsenergylett.6b00691 · doi:10.1021/acsenergylett.6b00691
  133. Jeon, 2014, o-Methoxy substituents in Spiro-OMeTAD for efficient inorganic–organic hybrid perovskite solar cells, J. Am. Chem. Soc., 136, 7837, 10.1021/ja502824c · DOI · Paper page
  134. Jeon, 2013, Efficient inorganic–organic hybrid perovskite solar cells based on pyrene arylamine derivatives as hole-transporting materials, J. Am. Chem. Soc., 135, 19087, 10.1021/ja410659k · DOI · Paper page
  135. Krishna, 2014, Novel hole transporting materials based on triptycene core for high efficiency mesoscopic perovskite solar cells, Chem. Sci., 5, 2702, 10.1039/C4SC00814F · doi:10.1039/c4sc00814f
  136. Di Giacomo, 2014, A. Di Carlo, High efficiency CH3NH3PbI(3−x)Clx perovskite solar cells with poly(3-hexylthiophene) hole transport layer, J. Power Sources, 251, 152, 10.1016/j.jpowsour.2013.11.053 · DOI
  137. Choi, 2014, Efficient star-shaped hole transporting materials with diphenylethenyl side arms for an efficient perovskite solar cell, J. Mater. Chem. A, 2, 19136, 10.1039/C4TA04179H · doi:10.1039/c4ta04179h
  138. Choi, 2014, Efficient Perovskite Solar Cells with 13.63% Efficiency Based on Planar Triphenylamine Hole Conductors, J. Ko., Chem. - Eur. J., 20, 10894, 10.1002/chem.201403807 · doi:10.1002/chem.201403807
  139. Conings, 2014, Perovskite-based hybrid solar cells exceeding 10% efficiency with high reproducibility using a thin film sandwich approach, Adv. Mater., 26, 2041, 10.1002/adma.201304803 · DOI · Paper page
  140. Guo, 2014, Enhancement in the efficiency of an organic-inorganic hybrid solar cell with a doped P3HT hole-transporting layer on a void-free perovskite active layer, J. Mater. Chem. A, 2, 13827, 10.1039/C4TA02976C · doi:10.1039/c4ta02976c
  141. Wang, 2015, Bifunctional Polymer Nanocomposites as hole-transport layers for efficient light harvesting: application to perovskite solar cells, ACS Appl. Mater. Interfaces, 7, 27676, 10.1021/acsami.5b08157 · doi:10.1021/acsami.5b08157
  142. Zhang, 2016, Enhanced performance of perovskite solar cells with P3HT hole-transporting materials via molecular p-type doping, RSC Adv., 6, 108888, 10.1039/C6RA21775C · doi:10.1039/c6ra21775c
  143. Vivo, 2017, Hole-transporting materials for printable perovskite solar cells, Materials, 10, 1087, 10.3390/ma10091087 · doi:10.3390/ma10091087
  144. Liu, 2015, Employing PEDOT as the p-type charge collection layer in regular organic–inorganic perovskite solar cells, J. Phys. Chem. Lett., 6, 1666, 10.1021/acs.jpclett.5b00545 · doi:10.1021/acs.jpclett.5b00545
  145. Jiang, 2017, High-performance regular perovskite solar cells employing low-cost Poly(ethylenedioxythiophene) as a hole-transporting material, Sci. Rep., 7, 42564, 10.1038/srep42564 · doi:10.1038/srep42564
  146. Kwon, 2014, A diketopyrrolopyrrole-containing hole transporting conjugated polymer for use in efficient stable organic-inorganic hybrid solar cells based on a perovskite, Energ, Environ. Sci., 7, 1454
  147. Zheng, 2014, A hydrophobic hole transporting oligothiophene for planar perovskite solar cells with improved stability, Chem. Commun., 50, 11196, 10.1039/C4CC04680C · DOI · Paper page
  148. Zhu, 2014, Polyfluorene derivatives are high-performance organic hole-transporting materials for inorganic−organic hybrid perovskite solar cells, Adv. Funct. Mater., 24, 7357, 10.1002/adfm.201401557 · DOI · Paper page
  149. Xiao, 2014, A thin pristine non-triarylamine hole-transporting material layer for efficient CH3NH3PbI3 perovskite solar cells, RSC Adv., 4, 32918, 10.1039/C4RA05199H · doi:10.1039/c4ra05199h
  150. Sepalage, 2015, Copper(I) Iodide as hole-conductor in planar perovskite solar cells: probing the Origin of J–V Hysteresis, Adv. Funct. Mater., 25, 5650, 10.1002/adfm.201502541 · DOI · Paper page
  151. Li, 2017, Synergistic effect to high-performance perovskite solar cells with reduced hysteresis and improved stability by the introduction of Na-Treated TiO2 and spraying-deposited cui as transport layers, ACS Appl. Mater. Interfaces, 9, 41354, 10.1021/acsami.7b14926 · doi:10.1021/acsami.7b14926
  152. Yang, 2017, Formation of pristine CuSCN layer by spray deposition method for efficient perovskite solar cell with extended stability, Nano Energy, 32, 414, 10.1016/j.nanoen.2016.12.059 · doi:10.1016/j.nanoen.2016.12.059
  153. Ramireddy, 2017, Emerging of inorganic hole transporting materials for perovskite solar cells, Chem. Rec., 17, 681, 10.1002/tcr.201600117 · DOI
  154. Han, 2018, Nitrogen doped cuprous oxide as low cost hole-transporting material for perovskite solar cells, Scr. Mater., 153, 104, 10.1016/j.scriptamat.2018.04.049 · DOI
  155. Hua, 2017, CuGaO2: a promising inorganic hole-transporting material for highly efficient and stable perovskite solar cells, Adv. Mater., 29, 1604984, 10.1002/adma.201604984 · DOI · Paper page
  156. Hossain, 2015, Copper oxide as inorganic hole transport material for lead halide perovskite based solar cells, Sol. Energy, 120, 370, 10.1016/j.solener.2015.07.040 · DOI · Paper page
  157. Ze, 2018, Inorganic hole-transporting materials for perovskite solar cells, small, Methods, 2, 1700280
  158. Etgar, 2015, Hole-transport material-free perovskite-based solar cells, MRS Bull., 40, 674, 10.1557/mrs.2015.174 · DOI
  159. Docampo, 2013, Efficient organometal trihalide perovskite planar-heterojunction solar cells on flexible polymer substrates, Nat. Commun., 4, 10.1038/ncomms3761 · DOI · Paper page
  160. Heo, 2015, Hysteresis-less inverted CH3NH3PbI3 planar perovskite hybrid solar cells with 18.1% power conversion efficiency, Energ. Environ. Sci., 8, 1602, 10.1039/C5EE00120J · DOI · Paper page
  161. Lim, 2014, Boosting the power conversion efficiency of perovskite solar cells using self-organized polymeric hole extraction layers with high work function, Adv. Mater., 26, 6461, 10.1002/adma.201401775 · doi:10.1002/adma.201401775
  162. Wang, 2015, Improved hole interfacial layer for planar perovskite solar cells with efficiency exceeding 15%, ACS Appl. Mater. Interfaces, 7, 9645, 10.1021/acsami.5b01330 · DOI
  163. Yan, 2015, High-performance hybrid perovskite solar cells with open circuit voltage dependence on hole-transporting materials, Nano Energy, 16, 428, 10.1016/j.nanoen.2015.07.024 · doi:10.1016/j.nanoen.2015.07.024
  164. Niu, 2017, Graphene-oxide doped PEDOT: PSS as a superior hole transport material for high-efficiency perovskite solar cell, Org. Electron., 48, 165, 10.1016/j.orgel.2017.05.044 · doi:10.1016/j.orgel.2017.05.044
  165. Wang, 2015, Doped hole transport layer for efficiency enhancement in planar heterojunction organolead trihalide perovskite solar cells, Nano Energy, 15, 275, 10.1016/j.nanoen.2015.04.029 · DOI · Paper page
  166. Liu, 2017, All solution processed perovskite solar cells with Ag@Au nanowires as top electrode, Sol. Energy Mater. Sol. Cells, 171, 43, 10.1016/j.solmat.2017.06.025 · doi:10.1016/j.solmat.2017.06.025
  167. Zhao, 2015, High-efficiency solution-processed planar perovskite solar cells with a polymer hole transport layer, Adv. Energy Mater., 5, 1401855, 10.1002/aenm.201401855 · DOI · Paper page
  168. Hu, 2014, Sequential deposition of CH3NH3PbI3 on planar NiO film for efficient planar perovskite solar cells, ACS Photonics, 1, 547, 10.1021/ph5000067 · DOI · Paper page
  169. Kim, 2015, High-performance and environmentally stable planar heterojunction perovskite solar cells based on a solution-processed copper-doped nickel oxide hole-transporting layer, Adv. Mater., 27, 695, 10.1002/adma.201404189 · DOI · Paper page
  170. Park, 2015, Efficient CH3NH3PbI3 perovskite solar cells employing nanostructured p-Type NiO electrode formed by a pulsed laser deposition, Adv. Mater., 27, 4013, 10.1002/adma.201500523 · DOI · Paper page
  171. Chen, 2015, Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers, Science, 350, 944, 10.1126/science.aad1015 · DOI · Paper page
  172. Jung, 2015, Solution-Processable, Cu-doped nickel oxide hole-transporting layer via the combustion method for high-performance thin-film perovskite solar cells, Adv. Mater., 27, 7874, 10.1002/adma.201503298 · DOI · Paper page
  173. Li, 2015, Hole-conductor-free planar perovskite solar cells with 16.0% efficiency, J. Mater. Chem. A, 3, 18389, 10.1039/C5TA05989E · doi:10.1039/c5ta05989e
  174. Wu, 2014, Efficient planar heterojunction perovskite solar cells employing graphene oxide as hole conductor, Nanoscale, 6, 10505, 10.1039/C4NR03181D · DOI · Paper page
  175. Tsai, 2015, High-performance hole-transporting layer-free conventional perovskite/fullerene heterojunction thin-film solar cells, J. Mater. Chem. A, 3, 9128, 10.1039/C5TA01343G · doi:10.1039/c5ta01343g
  176. Saliba, 2018, How to make over 20% efficient perovskite solar cells in regular (n–i–p) and Inverted (p–i–n) architectures, Chem. Mater., 30, 4193, 10.1021/acs.chemmater.8b00136 · DOI · Paper page
  177. Sha, 2015, The efficiency limit of CH3NH3PbI3 perovskite solar cells, Appl. Phys. Lett., 106, 221104, 10.1063/1.4922150 · DOI · Paper page
  178. Grånäs, 2016, Establishing the limits of efficiency of perovskite solar cells from first principles modeling, Sci. Rep., 6, 36108, 10.1038/srep36108 · DOI

Cited by

See all 150

Metadata

Authors
Odabaşı, Ç., & Yıldırım, R.
Venue
Nano Energy
Publisher
Elsevier BV
Published
2019-02
Volume
56
Pages
770-791
ISSN
2211-2855 (ISSN-L)
OpenAlex
W2902538834
Cited by
150
References
1
FWCI
3.86
Type
journal article
Language
en
Open access
closed
Licence
  • www.elsevier.com/tdm/userlicense/1.0/ (tdm)
  • www.elsevier.com/legal/tdmrep-license (tdm)
Funders
Boğaziçi University Research Fund (16A05TUG)

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Performance analysis of perovskite solar cells in 2013–2018 using machine-learning tools. https://app.cochat.ai/papers/10.1016/j.nanoen.2018.11.069
The paper
Odabaşı, Ç., & Yıldırım, R. (2019). Performance analysis of perovskite solar cells in 2013–2018 using machine-learning tools. Nano Energy. https://doi.org/10.1016/j.nanoen.2018.11.069

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.