State-of-the-art review on capture of CO2 using adsorbents prepared from waste materials
The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Abstract
As a result of energy-related anthropogenic emissions to the atmosphere, greenhouse gases (GHG) like CO2 observed to be the most abundant continue to accumulate in the atmosphere at an alarming rate, with concomitant rise in its environmental impact; and hence, spurring research in technologies to mitigate climate change. This comprehensive review provides the state-of-the-art of CO2 capture using adsorbents prepared from various waste materials, which are categorized on the basis of their generation processes such as pyrolysis, combustion, smelting, and petroleum-related upgrading. These include biomass waste, sludge, polymer wastes, by-product of fuel and waste combustion processes such as fly ash and other biomass-based ashes, and byproducts of smelting and petroleum processes such as red mud, steel and iron slag, carbide slag, and petroleum and coal residues. In general, biomass waste derived adsorbents (up to 21 mmol/g and 3900 m2/g), and petroleum and coal-based sorbents (160–900 mg/g and 850 to 3800 m2/g) exhibited the highest CO2 adsorption capacities and the highest surface areas. The technological and economic feasibilities of these waste-derived sorbents for the simultaneous removal of multicomponent pollutants (SOx, NOx, Hg and CO2) need to be further assessed in future studies, focusing on the development of more resistant and kinetically stable adsorbents using adsorption capacity, temperature and pressure as a design metrics; and techno-economic and life-cycle assessments to aid in the scale-up of adsorbents with outstanding laboratory-scale performances to industrial applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
What a Waste 2.0: A Global Snapshot of Solid Waste Management to 2050
Kaza, S., Yao, L. C., Bhada-Tata, P., Van Woerden, F., & Levine, D. (2018) · doi:10.1596/978-1-4648-1329-0 · Cited by 6,126
An overview of current status of carbon dioxide capture and storage technologies
Leung, D. Y. C., Caramanna, G., & Maroto-Valer, M. M. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.093 · Cited by 3,198
Carbon capture and storage update
Boot-Handford, M. E., Abanades, J. C., Anthony, E. J., Blunt, M. J., Brandani, S., Mac Dowell, N., Fernández, J. R., Ferrari, M.-C., Gross, R., Hallett, J. P., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42350f · Cited by 2,386
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
Mineral CO 2 Sequestration by Steel Slag Carbonation
Huijgen, W. J. J., Witkamp, G.-J., & Comans, R. N. J. (2005) · Environmental Science & Technology · doi:10.1021/es050795f · Cited by 858
A review on solid adsorbents for carbon dioxide capture
Lee, S.-Y., & Park, S.-J. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.09.001 · Cited by 707
Ex situ aqueous mineral carbonation
Gerdemann, S. J., O'Connor, W. K., Dahlin, D. C., Penner, L. R., & Rush, H. (2007) · Environmental Science & Technology · doi:10.1021/es0619253 · Cited by 633
Wang, R., Wang, P., Yan, X., Lang, J., Peng, C., & Xue, Q. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am302077c · Cited by 475
Pan, S.-Y., Chang, E. E., & Chiang, P.-C. (2012) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2012.06.0149 · Cited by 459
Carbon dioxide capture using biochar produced from sugarcane bagasse and hickory wood
Creamer, A. E., Gao, B., & Zhang, M. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.03.105 · Cited by 432
Enhanced CO2 Capture Capacity of Nitrogen-Doped Biomass-Derived Porous Carbons
Chen, J., Yang, J., Hu, G., Hu, X., Li, Z., Shen, S., Radosz, M., & Fan, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01425 · Cited by 419
Importance of small micropores in CO 2 capture by phenolic resin-based activated carbon spheres
Wickramaratne, N. P., & Jaroniec, M. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00388k · Cited by 415
Trends in Solid Adsorbent Materials Development for CO 2 Capture
Pardakhti, M., Jafari, T., Tobin, Z., Dutta, B., Moharreri, E., Shemshaki, N. S., Suib, S., & Srivastava, R. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b08487 · Cited by 357
Valorisation of spent coffee grounds as CO2 adsorbents for postcombustion capture applications
Plaza, M. G., González, A. S., Pevida, C., Pis, J. J., & Rubiera, F. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.05.028 · Cited by 313
Adsorption of CO2 from flue gas by novel seaweed-based KOH-activated porous biochars
Ding, S., & Liu, Y. (2020) · Fuel · doi:10.1016/j.fuel.2019.116382 · Cited by 311
Self-citationSustainable biomass-based carbon adsorbents for post-combustion CO2 capture
González, A. S., Plaza, M. G., Rubiera, F., & Pevida, C. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.118 · Cited by 280
High-performance CO2 sorbents from algae
Sevilla, M., Falco, C., Titirici, M.-M., & Fuertes, A. B. (2012) · RSC Advances · doi:10.1039/c2ra22552b · Cited by 269
Bhagiyalakshmi, M., Yun, L. J., Anuradha, R., & Jang, H. T. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.10.097 · Cited by 236
Fungi-based porous carbons for CO2 adsorption and separation
Wang, J., Heerwig, A., Lohe, M. R., Oschatz, M., Borchardt, L., & Kaskel, S. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32139d · Cited by 220
Chemical transformation of CO2 during its capture by waste biomass derived biochars
Xu, X., Kan, Y., Zhao, L., & Cao, X. (2016) · Environmental Pollution · doi:10.1016/j.envpol.2016.03.013 · Cited by 220
CO2 Sequestration Potential of Steel Slags at Ambient Pressure and Temperature
Bonenfant, D., Kharoune, L., Sauve´, S., Hausler, R., Niquette, P., Mimeault, M., & Kharoune, M. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie701721j · Cited by 215
Lahijani, P., Mohammadi, M., & Mohamed, A. R. (2018) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2018.05.018 · Cited by 200
Carbonation of brine impacted fractionated coal fly ash: Implications for CO2 sequestration
Nyambura, M. G., Mugera, G. W., Felicia, P. L., & Gathura, N. P. (2011) · Journal of Environmental Management · doi:10.1016/j.jenvman.2010.10.008 · Cited by 191
Sorbents for CO2 capture from high carbon fly ashes
Mercedes Maroto-Valer, M., Lu, Z., Zhang, Y., & Tang, Z. (2008) · Waste Management · doi:10.1016/j.wasman.2007.10.012 · Cited by 189
Kinetics of Aqueous Leaching and Carbonization of Steelmaking Slag
Lekakh, S. N., Rawlins, C. H., Robertson, D. G. C., Richards, V. L., & Peaslee, K. D. (2008) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-007-9112-8 · Cited by 176
Development of microporous carbons for CO2 capture by KOH activation of African palm shells
Ello, A. S., de Souza, L. K. C., Trokourey, A., & Jaroniec, M. (2013) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2013.07.003 · Cited by 165
Energy Consumption and Net CO 2 Sequestration of Aqueous Mineral Carbonation
Huijgen, W. J. J., Ruijg, G. J., Comans, R. N. J., & Witkamp, G.-J. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie060636k · Cited by 162
Carbon dioxide capture using various metal oxyhydroxide–biochar composites
Creamer, A. E., Gao, B., & Wang, S. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.08.037 · Cited by 161
Activated carbons prepared from peanut shell and sunflower seed shell for high CO2 adsorption
Deng, S., Hu, B., Chen, T., Wang, B., Huang, J., Wang, Y., & Yu, G. (2015) · Adsorption · doi:10.1007/s10450-015-9655-y · Cited by 159
Breakthrough CO 2 adsorption in bio-based activated carbons
Shahkarami, S., Azargohar, R., Dalai, A. K., & Soltan, J. (2015) · Journal of Environmental Sciences · doi:10.1016/j.jes.2015.03.008 · Cited by 155
Thin-film versus slurry-phase carbonation of steel slag: CO2 uptake and effects on mineralogy
Baciocchi, R., Costa, G., Di Gianfilippo, M., Polettini, A., Pomi, R., & Stramazzo, A. (2015) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2014.09.016 · Cited by 147
Highly siliceous MCM-48 from rice husk ash for CO2 adsorption
Jang, H. T., Park, Y., Ko, Y. S., Lee, J. Y., & Margandan, B. (2009) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2009.02.008 · Cited by 143
Removal of Gaseous Hg0 Using Novel Seaweed Biomass-Based Activated Carbon
Liu, Z., Adewuyi, Y. G., Shi, S., Chen, H., Li, Y., Liu, D., & Liu, Y. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.02.025 · Cited by 132
Self-citationCarbonation of Stainless Steel Slag as a Process for CO2 Storage and Slag Valorization
Baciocchi, R., Costa, G., Di Bartolomeo, E., Polettini, A., & Pomi, R. (2010) · Waste and Biomass Valorization · doi:10.1007/s12649-010-9047-1 · Cited by 126
Greening coal: breakthroughs and challenges in carbon capture and storage
Stauffer, P. H., Keating, G. N., Middleton, R. S., Viswanathan, H. S., Berchtold, K. A., Singh, R. P., Pawar, R. J., & Mancino, A. (2011) · Environmental Science & Technology · doi:10.1021/es200510f · Cited by 122
Sustainable and hierarchical porous Enteromorpha prolifera based carbon for CO2 capture
Zhang, Z., Wang, K., Atkinson, J. D., Yan, X., Li, X., Rood, M. J., & Yan, Z. (2012) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2012.05.094 · Cited by 120
Activated carbon produced from paulownia sawdust for high-performance CO2 sorbents
Zhu, X.-L., Wang, P.-Y., Peng, C., Yang, J., & Yan, X.-B. (2014) · Chinese Chemical Letters · doi:10.1016/j.cclet.2014.03.039 · Cited by 112
Zhang, X., Zhang, S., Yang, H., Shao, J., Chen, Y., Feng, Y., Wang, X., & Chen, H. (2015) · Energy · doi:10.1016/j.energy.2015.08.028 · Cited by 109
The CO2-binding by Ca-Mg-silicates in direct aqueous carbonation of oil shale ash and steel slag
Uibu, M., Kuusik, R., Andreas, L., & Kirsimäe, K. (2011) · Energy Procedia · doi:10.1016/j.egypro.2011.01.138 · Cited by 104
Wang, K., Zhao, P., Guo, X., Li, Y., Han, D., & Chao, Y. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.02.054 · Cited by 97
Simultaneous capture and mineralization of coal combustion flue gas carbon dioxide (CO2)
Reddy, K. J., John, S., Weber, H., Argyle, M. D., Bhattacharyya, P., Taylor, D. T., Christensen, M., Foulke, T., & Fahlsing, P. (2011) · Energy Procedia · doi:10.1016/j.egypro.2011.02.027 · Cited by 75
Zeng, W., & Bai, H. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.04.041 · Cited by 65
Polyethyleneimine-loaded bimodal porous silica as low-cost and high-capacity sorbent for CO2 capture
Witoon, T. (2012) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2012.09.014 · Cited by 62
Investigation of CaO-based sorbents derived from eggshells and red mud for CO2 capture
He, S., Hu, Y., Hu, T., Ma, A., Jia, Q., Su, H., & Shan, S. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.12.194 · Cited by 57
Cited by
Research progress on CO2 capture and utilization technology
Fu, L., Ren, Z., Si, W., Ma, Q., Huang, W., Liao, K., Huang, Z., Wang, Y., Li, J., & Xu, P. (2022) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.102260 · Cited by 529
Carbon dioxide capture using liquid absorption methods: a review
Ochedi, F. O., Yu, J., Yu, H., Liu, Y., & Hussain, A. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01093-8 · Cited by 481
Self-citationPetrovic, B., Gorbounov, M., & Masoudi Soltani, S. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110751 · Cited by 381
Application of isotherms models and error functions in activated carbon CO2 sorption processes
Serafin, J., & Dziejarski, B. (2023) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2023.112513 · Cited by 268
Shi, S., & Liu, Y. (2021) · Fuel · doi:10.1016/j.fuel.2021.121762 · Cited by 136
Metadata
- Authors
- Ochedi, F. O., Liu, Y., & Adewuyi, Y. G.
- Venue
- Process Safety and Environmental Protection
- Publisher
- Elsevier BV
- Published
- 2020-07
- Volume
- 139
- Pages
- 1-25
- ISSN
- 0263-8762 (ISSN-L)
- 0957-5820
- OpenAlex
- W3015504750
- Cited by
- 140
- References
- 44
- FWCI
- 9.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.