Comparative analysis of building insulation material properties and performance
Open accessThe DOI matches its Crossref record; 107 of the 107 references it cites were found in a registry or an index.
Abstract
Abstract Building envelope insulation is crucial for an energy-efficient and comfortable indoor environment because the envelope accounts for 50–60% of total heat gain/loss in a building. Previous studies mostly used lifecycle cost as the criteria to select the optimum insulation materials with little or no consideration of embodied energy, emission, and summer overheating potential. This study presents a comparative analysis of building insulation materials properties (thermal, hygroscopic, acoustic, reaction to fire, environmental, and cost) and their performance in different climate zones and proposed an optimization framework. Insulation materials can be primarily categorized as conventional, state-of-the-art and sustainable. State-of-the-art insulation materials have the lowest thermal conductivity value amongst the three insulation types. However, their life cycle cost is higher compared to the other types. Sustainable insulation materials could be useful to delay and minimize indoor peak temperature and reduce overheating risk during the hot summer period. The analysis also showed that building walls with comparatively lower thermal resistance are more cost-effective for the cooling dominated region, but walls with higher thermal resistance are more cost-effective in heating-dominated regions. However, highly insulated and airtight houses may also lead to increased overheating risk and peak cooling demand during a hot summer period. In addition, hygroscopic, acoustic, and fire retardancy properties of insulation materials are critical to control indoor relative humidity in a humid region, to maintain a minimum noise level in a zone, and to reduce fire destruction. Hence, the optimization should include four criteria 1) Energy, 2) Environment, 3) Economic, and 4) Comfort.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Zabalza Bribián, I., Valero Capilla, A., & Aranda Usón, A. (2011) · Building and Environment · doi:10.1016/j.buildenv.2010.12.002 · Cited by 1,287
Jelle, B. P. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2011.05.015 · Cited by 1,196
Embodied energy and carbon in construction materials
Hammond, G. P., & Jones, C. I. (2008) · Proceedings of the Institution of Civil Engineers - Energy · doi:10.1680/ener.2008.161.2.87 · Cited by 994
Insulation materials for the building sector: A review and comparative analysis
Schiavoni, S., D׳Alessandro, F., Bianchi, F., & Asdrubali, F. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.05.045 · Cited by 993
A review of unconventional sustainable building insulation materials
Asdrubali, F., D'Alessandro, F., & Schiavoni, S. (2015) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2015.05.002 · Cited by 952
A review on insulation materials for energy conservation in buildings
Aditya, L., Mahlia, T. M. I., Rismanchi, B., Ng, H. M., Hasan, M. H., Metselaar, H. S. C., Muraza, O., & Aditiya, H. B. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.02.034 · Cited by 811
Toward aerogel based thermal superinsulation in buildings: A comprehensive review
Cuce, E., Cuce, P. M., Wood, C. J., & Riffat, S. B. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.03.017 · Cited by 775
Acoustic characterization of natural fibers for sound absorption applications
Berardi, U., & Iannace, G. (2015) · Building and Environment · doi:10.1016/j.buildenv.2015.05.029 · Cited by 729
Traditional, state-of-the-art and renewable thermal building insulation materials: An overview
Abu-Jdayil, B., Mourad, A.-H., Hittini, W., Hassan, M., & Hameedi, S. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.04.102 · Cited by 638
A review of the economical and optimum thermal insulation thickness for building applications
Kaynaklı, Ö. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.08.006 · Cited by 497
Somarathna, H. M. C. C., Raman, S. N., Mohotti, D., Mutalib, A. A., & Badri, K. H. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.09.166 · Cited by 462
An environment-friendly thermal insulation material from cotton stalk fibers
Zhou, X.-Y., Zheng, F., Li, H.-G., & Lu, C.-L. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.01.020 · Cited by 426
Thermal inertia in buildings: A review of impacts across climate and building use
Verbeke, S., & Audenaert, A. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.08.083 · Cited by 415
A Review of Sustainable Materials for Acoustic Applications
Asdrubali, F., Schiavoni, S., & Horoshenkov, K. V. (2012) · Building Acoustics · doi:10.1260/1351-010x.19.4.283 · Cited by 409
Osanyintola, O. F., & Simonson, C. J. (2006) · Energy and Buildings · doi:10.1016/j.enbuild.2006.03.026 · Cited by 379
Renewable materials to reduce building heat loss: Characterization of date palm wood
Agoudjil, B., Benchabane, A., Boudenne, A., Ibos, L., & Fois, M. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2010.10.014 · Cited by 341
Annie Paul, S., Boudenne, A., Ibos, L., Candau, Y., Joseph, K., & Thomas, S. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.06.004 · Cited by 341
Villasmil, W., Fischer, L. J., & Worlitschek, J. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.12.040 · Cited by 329
Patnaik, A., Mvubu, M., Muniyasamy, S., Botha, A., & Anandjiwala, R. D. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.01.056 · Cited by 320
Ascione, F., Bianco, N. D., Mauro, G. M., & Napolitano, D. F. (2019) · Energy · doi:10.1016/j.energy.2019.02.182 · Cited by 299
Ranking of interventions to reduce dwelling overheating during heat waves
Porritt, S. M., Cropper, P. C., Shao, L., & Goodier, C. I. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2012.01.043 · Cited by 292
Muthuraj, R., Lacoste, C., Lacroix, P., & Bergeret, A. (2019) · Industrial Crops and Products · doi:10.1016/j.indcrop.2019.04.053 · Cited by 291
Building energy performance: A LCA case study of kenaf-fibres insulation board
Ardente, F., Beccali, M., Cellura, M., & Mistretta, M. (2008) · Energy and Buildings · doi:10.1016/j.enbuild.2006.12.009 · Cited by 278
New low-cost insulation particleboards from mixture of durian peel and coconut coir
Khedari, J., Nankongnab, N., Hirunlabh, J., & Teekasap, S. (2004) · Building and Environment · doi:10.1016/j.buildenv.2003.08.001 · Cited by 268
Comparative environmental life cycle assessment of thermal insulation materials of buildings
Pargana, N., Pinheiro, M. D., Silvestre, J. D., & de Brito, J. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.05.057 · Cited by 267
Performance evaluation and research of alternative thermal insulations based on sheep wool
Zach, J., Korjenic, A., Petránek, V., Hroudová, J., & Bednar, T. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2012.02.014 · Cited by 258
System boundary for embodied energy in buildings: A conceptual model for definition
Dixit, M. K., Culp, C. H., & Fernández-Solís, J. L. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.12.037 · Cited by 236
Overheating in buildings: lessons from research
Lomas, K. J., & Porritt, S. M. (2017) · Building Research & Information · doi:10.1080/09613218.2017.1256136 · Cited by 230
Huang, H., Zhou, Y., Huang, R., Wu, H., Sun, Y., Huang, G., & Xu, T. (2019) · Sustainable Cities and Society · doi:10.1016/j.scs.2019.101840 · Cited by 221
New insulating particleboards from durian peel and coconut coir
Khedari, J., Charoenvai, S., & Hirunlabh, J. (2003) · Building and Environment · doi:10.1016/s0360-1323(02)00030-6 · Cited by 218
A review on the properties of cellulose fibre insulation
Lopez Hurtado, P., Rouilly, A., Vandenbossche, V., & Raynaud, C. (2016) · Building and Environment · doi:10.1016/j.buildenv.2015.09.031 · Cited by 210
Experimental performance evaluation of aerogel glazing systems
Buratti, C., & Moretti, E. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.12.055 · Cited by 207
Manufacture and properties of low-density binderless particleboard from kenaf core
Xu, J., Sugawara, R., Widyorini, R., Han, G., & Kawai, S. (2004) · Journal of Wood Science · doi:10.1007/s10086-003-0522-1 · Cited by 206
Sound absorption performance of natural kenaf fibres
Lim, Z. Y., Putra, A., Nor, M. J. M., & Yaakob, M. Y. (2018) · Applied Acoustics · doi:10.1016/j.apacoust.2017.09.012 · Cited by 203
Cellura, M., Guarino, F., Longo, S., & Mistretta, M. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2013.12.046 · Cited by 199
Hong, S. H., Gilbertson, J., Oreszczyn, T., Green, G., & Ridley, I. (2009) · Building and Environment · doi:10.1016/j.buildenv.2008.09.003 · Cited by 195
Development of windows based on highly insulating aerogel glazings
Jensen, K. I., Schultz, J. M., & Kristiansen, F. H. (2004) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2004.06.047 · Cited by 189
Asdrubali, F., & Baldinelli, G. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2011.03.005 · Cited by 174
Characterization of corn cob as a possible raw building material
Pinto, J., Cruz, D., Paiva, A., Pereira, S., Tavares, P., Fernandes, L., & Varum, H. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.02.014 · Cited by 168
Kalaprasad, G., Pradeep, P., Mathew, G., Pavithran, C., & Thomas, S. (2000) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00162-7 · Cited by 168
Kumar, A., & Suman, B. M. (2013) · Building and Environment · doi:10.1016/j.buildenv.2012.09.023 · Cited by 167
Acoustic absorption of hemp-lime construction
Kinnane, O., Reilly, A., Grimes, J., Pavía, S., & Walker, R. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.06.106 · Cited by 166
Buratti, C., Belloni, E., Lascaro, E., Merli, F., & Ricciardi, P. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.03.089 · Cited by 166
Gao, T., Jelle, B. P., Sandberg, L. I. C., & Gustavsen, A. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am302303b · Cited by 165
A contribution to the thermal insulation performance characterization of corn cob particleboards
Paiva, A., Pereira, S., Briga-Sá, A., Cruz, D., Varum, H., & Pinto, J. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2011.11.019 · Cited by 160
A comparison of the environmental impacts of different categories of insulation materials
Hill, C. A. S., Norton, A. J., & Dibdiaková, J. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.12.009 · Cited by 156
Rojas-Herrera, C., Cea, M., Iriarte, A., et al. (2019) · Sustainable materials and technologies · doi:10.1016/j.susmat.2019.e00102 · Cited by 155
Insulating glazing units with silica aerogel granules: The impact of particle size
Gao, T., Jelle, B. P., Ihara, T., & Gustavsen, A. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.04.037 · Cited by 152
Jamil, H., Alam, M., Sanjayan, J., & Wilson, J. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.09.064 · Cited by 136
Self-citationSynthesis of Silica Aerogel by Supercritical Drying Method
Błaszczyński, T., Ślosarczyk, A., & Morawski, M. (2013) · Procedia Engineering · doi:10.1016/j.proeng.2013.04.028 · Cited by 128
Solar transparent insulation materials: a review
Kaushika, N. D., & Sumathy, K. (2003) · Renewable and Sustainable Energy Reviews · doi:10.1016/s1364-0321(03)00067-4 · Cited by 124
Cellulose Aerogels for Thermal Insulation in Buildings: Trends and Challenges
Illera, D., Mesa, J. A., Gómez, H. A., & Maury, H. (2018) · Coatings · doi:10.3390/coatings8100345 · Cited by 121
Silkworm cocoon as natural material and structure for thermal insulation
Zhang, J., Rajkhowa, R., Li, J., Liu, X., & Wang, X. G. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.02.006 · Cited by 117
Dodoo, A., & Gustavsson, L. (2016) · Energy · doi:10.1016/j.energy.2015.12.086 · Cited by 116
A Review of Transparent Insulation Material (TIM) for building energy saving and daylight comfort
Sun, Y., Wilson, R., & Wu, Y. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.05.094 · Cited by 112
Sustainable acoustic and thermal insulation materials from elastomeric waste residues
Benkreira, H., Khan, A., & Horoshenkov, K. V. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.05.047 · Cited by 108
Ibrahim, M., Biwolé, P. H., Achard, P., Wurtz, É., & Ansart, G. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.08.090 · Cited by 108
Lee, J., Kim, J.-G., Song, D., Kim, J., & Jang, C.-Y. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.11.087 · Cited by 107
Pyrgou, A., Castaldo, V. L., Pisello, A. L., Cotana, F., & Santamouris, M. (2016) · Sustainable Cities and Society · doi:10.1016/j.scs.2016.09.012 · Cited by 106
Gonçalves, M., Simões, N. A. V., Serra, C., & Flores‐Colen, I. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.114028 · Cited by 106
Gas-filled panels for building applications: A state-of-the-art review
Baetens, R., Jelle, B. P., Gustavsen, A., & Grynning, S. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.06.019 · Cited by 102
Environmental implications of the use of agglomerated cork as thermal insulation in buildings
Sierra-Pérez, J., Boschmonart-Rives, J., Dias, A. C., & Gabarrell, X. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.02.146 · Cited by 101
Energy efficiency and carbon trading potential in Malaysia
Oh, T. H., & Chua, S. C. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.03.029 · Cited by 100
Taban, E., Khavanin, A., Ohadi, A., Putra, A., Jafari, A. J., Faridan, M., & Soleimanian, A. (2019) · Building and Environment · doi:10.1016/j.buildenv.2019.106274 · Cited by 97
Palumbo, M., Palacio, A. M. L., Forero, M. D. P. G., Haurie, L., & Mòdol, E. C. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.06.042 · Cited by 94
Thermal insulation and physical properties of particleboards from pineapple leaves
Tangjuank, S. (2011) · International Journal of the Physical Sciences · doi:10.5897/ijps11.1057 · Cited by 93
Ecological, thermal and acoustical insulating composite from hemp shives and sapropel binder
Balčiūnas, G., Žvironaitė, J., Vėjelis, S., Jagniatinskis, A., & Gaidučis, S. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.06.034 · Cited by 89
Insulation Cork Boards—Environmental Life Cycle Assessment of an Organic Construction Material
Silvestre, J., Pargana, N., de Brito, J., Pinheiro, M. D., & Durão, V. (2016) · Materials · doi:10.3390/ma9050394 · Cited by 85
Experimental Investigation of Building Thermal Insulation from Agricultural By-products
Manohar, K. (2012) · British Journal of Applied Science & Technology · doi:10.9734/bjast/2012/1528 · Cited by 81
Thermal radiative properties of phenolic foam insulation
Tseng, C., & Kuo, K. (2002) · Journal of Quantitative Spectroscopy and Radiative Transfer · doi:10.1016/s0022-4073(01)00129-7 · Cited by 81
A Review of the Flammability Factors of Kenaf and Allied Fibre Reinforced Polymer Composites
Lee, C. H., Sapuan, S. M., & Hassan, M. R. (2014) · Advances in Materials Science and Engineering · doi:10.1155/2014/514036 · Cited by 80
Corn husk for noise reduction: Robust acoustic absorption and reduced thickness
Tang, X., Zhang, X., Zhang, H., Zhuang, X., & Yan, X. (2018) · Applied Acoustics · doi:10.1016/j.apacoust.2018.01.012 · Cited by 78
Pedroso, M. F., Flores‐Colen, I., Silvestre, J. D., Gomes, M. G., Silva, L., & Ilharco, L. M. (2020) · Energy and Buildings · doi:10.1016/j.enbuild.2020.109793 · Cited by 78
Hygric buffer and acoustic absorption of new building insulation materials based on date palm fibers
Belakroum, R., Gherfi, A., Bouchema, K., Gharbi, A., Kerboua, Y., Kadja, M., Maalouf, C., Hoang, T., Wakil, N. E., & Lachi, M. (2017) · Journal of Building Engineering · doi:10.1016/j.jobe.2017.05.011 · Cited by 77
Straw bale based constructions: Measurement of effective thermal transport properties
Sabapathy, K. A., & Gedupudi, S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.11.256 · Cited by 76
Overheating in retrofitted flats: occupant practices, learning and interventions
Baborska-Narożny, M., Stevenson, F., & Grudzińska, M. (2016) · Building Research & Information · doi:10.1080/09613218.2016.1226671 · Cited by 75
Innovative use of giant reed and cork residues for panels of buildings in Mediterranean area
Barreca, F., Gabarrón, A. M., Yepes, J. A. F., & Pérez, J. J. P. (2018) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2018.10.005 · Cited by 71
Berardi, U., & Madzarevic, J. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114440 · Cited by 69
Copiello, S. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.04.054 · Cited by 68
Eschenhagen, A., Raj, M., Rodrigo, N., Zamora, A., Labonne, L., Evon, P., & Welemane, H. (2019) · Advances in Civil Engineering · doi:10.1155/2019/9328087 · Cited by 68
Thermo-Insulation Properties Of Hemp-Based Products
Lekavičius, V., Shipkovs, P., Ivanovs, S., & Ruciņš, Ā. (2015) · Latvian Journal of Physics and Technical Sciences · doi:10.1515/lpts-2015-0004 · Cited by 67
Environmental characterisation of coffee chaff, a new recycled material for building applications
Ricciardi, P., Torchia, F., Belloni, E., Lascaro, E., & Buratti, C. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.114 · Cited by 65
A passive–active dynamic insulation system for all climates
Imbabi, M. S. (2012) · International Journal of Sustainable Built Environment · doi:10.1016/j.ijsbe.2013.03.002 · Cited by 64
Heat stress within energy efficient dwellings in Australia
Ren, Z., Wang, X., & Chen, D. (2014) · Architectural Science Review · doi:10.1080/00038628.2014.903568 · Cited by 60
Piszczyk, Ł., Hejna, A., Formela, K., Danowska, M., & Strankowski, M. (2014) · Iranian Polymer Journal · doi:10.1007/s13726-014-0301-4 · Cited by 59
Heat stress-resistant building design in the Australian context
Hatvani-Kovacs, G., Belusko, M., Pockett, J., & Boland, J. W. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.10.025 · Cited by 58
Nano Insulation Materials: Synthesis and Life Cycle Assessment
Gao, T., Sandberg, L. I. C., & Jelle, B. P. (2014) · Procedia CIRP · doi:10.1016/j.procir.2014.06.041 · Cited by 57
Modelling the correlation between building energy ratings and heat-related mortality and morbidity
Alam, M., Sanjayan, J., Zou, P. X. W., Stewart, M. G., & Wilson, J. L. (2016) · Sustainable Cities and Society · doi:10.1016/j.scs.2016.01.006 · Cited by 57
Self-citationEnvironmental assessment of a nano-technological aerogel-based panel for building insulation
de Guinoa, A. S., Vásquez, D. Z., Alcalde, A., Corradini, M., & Zabalza, I. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.06.102 · Cited by 57
Thermo-economic analysis of building energy retrofits using VIP - Vacuum Insulation Panels
Fantucci, S., Garbaccio, S., Lorenzati, A., & Perino, M. (2019) · Energy and Buildings · doi:10.1016/j.enbuild.2019.05.019 · Cited by 57
König, J., Nemanič, V., Žumer, M., Petersen, R. R., Østergaard, M. B., Yue, Y., & Suvorov, D. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.04.109 · Cited by 56
Optimization of thermal insulation to achieve energy savings in low energy house (refurbishment)
Bojic, M. L., Miletić, M., & Bojić, L. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.04.095 · Cited by 54
Willand, N., Ridley, I. A., & Pears, A. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.12.032 · Cited by 54
Damfeu, J. C., Meukam, P., & Jannot, Y. (2016) · Thermochimica Acta · doi:10.1016/j.tca.2016.02.007 · Cited by 52
Sierra-Pérez, J., Rodríguez-Soria, B., Boschmonart-Rives, J., & Gabarrell, X. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.12.101 · Cited by 52
Tilioua, A., Libessart, L., & Lassue, S. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.06.071 · Cited by 51
Economic assessment of the production of subcritically dried silica-based aerogels
Garrido, R., Silvestre, J. D., Flores‐Colen, I., Júlio, M. D. F., & Pedroso, M. F. (2019) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2019.04.016 · Cited by 49
Sierra-Pérez, J., García-Pérez, S., Blanc, S., Boschmonart-Rives, J., & Gabarrell, X. (2018) · Sustainable Cities and Society · doi:10.1016/j.scs.2017.12.008 · Cited by 48
Experimental and mathematical survey of sound absorption performance of date palm fibers
Taban, E., Khavanin, A., Jafari, A. J., Faridan, M., & Tabrizi, A. K. (2019) · Heliyon · doi:10.1016/j.heliyon.2019.e01977 · Cited by 48
Merli, F., Anderson, A. M., Carroll, M. K., & Buratti, C. (2018) · Applied Acoustics · doi:10.1016/j.apacoust.2018.08.008 · Cited by 44
Thermal properties of fractions of corn stover
Czajkowski, Ł., Wojcieszak, D., Olek, W., & Przybył, J. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.03.092 · Cited by 42
Anastaselos, D., Oxizidis, S., & Papadopoulos, A. M. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.11.013 · Cited by 41
Tallini, A., & Cedola, L. (2018) · Energy Procedia · doi:10.1016/j.egypro.2018.08.108 · Cited by 35
Sound absorption characteristics of KGM-based aerogel
Wang, Y., Fei, X., Wang, W., Wang, W., Su, Y., Jiang, F., Chen, S., & Riffat, S. (2020) · International Journal of Low-Carbon Technologies · doi:10.1093/ijlct/ctaa005 · Cited by 32
Alam, M., Rajeev, P., Sanjayan, J., Zou, P. X. W., & Wilson, J. L. (2018) · Australian Journal of Civil Engineering · doi:10.1080/14488353.2018.1453331 · Cited by 18
Self-citationFique as thermal insulation morphologic and thermal characterization of fique fibers
Sánchez, G. F. G., Lopez, R. E. G., Restrepo‐Osorio, A., & Arroyo, E. H. (2019) · Cogent Engineering · doi:10.1080/23311916.2019.1579427 · Cited by 17
Pathways to climate adapted and healthy low income housing
Barnett, G., Beaty, M., & Chen, D. (2013) · Cited by 15
Cited by
Rabbat, C., Awad, S., Villot, A., Rollet, D., & Andrès, Y. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111962 · Cited by 183
Furszyfer Del Rio, D. D., Sovacool, B. K., Foley, A. M., Griffiths, S., Bazilian, M., Kim, J., & Rooney, D. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111885 · Cited by 171
Nielsen-Roine, K., Semple, K. E., Mokarizadehhaghighishirazi, M., Meyboom, A., & Dai, C. (2026) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-026-03543-3
Chen, J., Li, Y., Wu, H., & Yang, L. (2026) · Buildings · doi:10.3390/buildings16163165
Metadata
- Authors
- Kumar, D., Alam, M., Zou, P. X. W., Sanjayan, J. G., & Memon, R. A.
- Venue
- Renewable and Sustainable Energy Reviews
- Publisher
- Elsevier BV
- Published
- 2020-10
- Volume
- 131
- Pages
- 110038
- ISSN
- 1364-0321 (ISSN-L)
- OpenAlex
- W3042290089
- Cited by
- 501
- References
- 107
- FWCI
- 25.38
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.