The DOI matches its Crossref record; 149 of the 149 references it cites were found in a registry or an index.
Post-combustion carbon capture
Open accessAbstract
Abstract CCS, Carbon Capture and Storage, is considered a promising technology to abate CO2 emissions from point sources. The present review deals with the principle of post-combustion capture techniques, including thermal or pressure swing principles, adsorption or absorption, and electrical swing or membrane separation processes. Opportunities and challenges are assessed. In the first section of absorption processes, several commercial technologies are compared and complemented by the aqueous or chilled ammonia (NH3) process, and a dual or strong alkali absorption. The second section deals with adsorption where fixed beds, circulating fluidized beds and counter-current bed configurations will be discussed, with particular focus on the different adsorbents ranging from zeolites or activated carbon, to more complex amine-functionalized adsorbents, nanotubes or metal organic frameworks (MOFs), and alkali-promoted oxides. Thirdly, membrane processes will be analysed. The review will finally summarize challenges and opportunities. Several research groups confirmed that absorption is the most mature post-combustion capture process: among the assessment of post-combustion CCS, 57% apply absorption, 14% rely on adsorption, 8% use membranes, and 21% apply mineralization or bio-fixation. This conclusion was in-line with expectations since absorption gas separation has been largely applied in various petrochemical industries. All other systems need further development prior to large scale application.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Eddaoudi, M., Kim, J., Rosi, N., Vodak, D., Wachter, J., O'Keeffe, M., & Yaghi, O. M. (2002) · Science · doi:10.1126/science.1067208 · Cited by 8,132
Hybrid porous solids: past, present, future
Férey, G. (2008) · Chem. Soc. Rev. · doi:10.1039/b618320b · Cited by 5,822
IPCC special report on carbon dioxide capture and storage
Metz, B., Davidson, O. R., de Coninck, H., Loos, M., & Meyer, L. (2021) · Cited by 4,875
Ultrahigh Porosity in Metal-Organic Frameworks
Furukawa, H., Ko, N., Go, Y. B., Aratani, N., Choi, S. B., Choi, E., Yazaydin, A. Ö., Snurr, R. Q., O’Keeffe, M., Kim, J., et al. (2010) · Science · doi:10.1126/science.1192160 · Cited by 3,904
Modification of the surface chemistry of activated carbons
Figueiredo, J. L., Pereira, M. F. R., Freitas, M. M. A., & Órfão, J. J. M. (1999) · Carbon · doi:10.1016/s0008-6223(98)00333-9 · Cited by 2,935
Liu, J., Rinzler, A. G., Dai, H., Hafner, J. H., Bradley, R. K., Boul, P. J., Lu, A., Iverson, T., Shelimov, K., Huffman, C. B., et al. (1998) · Science · doi:10.1126/science.280.5367.1253 · Cited by 2,903
Porous materials with optimal adsorption thermodynamics and kinetics for CO2 separation
Nugent, P., Belmabkhout, Y., Burd, S. D., Cairns, A. J., Luebke, R., Forrest, K., Pham, T., Ma, S., Space, B., Wojtas, L., et al. (2013) · Nature · doi:10.1038/nature11893 · Cited by 2,387
Progress in carbon dioxide separation and capture: A review
Yang, H., Xu, Z., Fan, M., Gupta, R., Slimane, R. B., Bland, A. E., & Wright, I. (2008) · Journal of Environmental Sciences · doi:10.1016/s1001-0742(08)60002-9 · Cited by 2,087
Postsynthetic modification of metal–organic frameworks
Wang, Z., & Cohen, S. M. (2009) · Chemical Society Reviews · doi:10.1039/b802258p · Cited by 1,973
Future Directions of Membrane Gas Separation Technology
Baker, R. W. (2002) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0108088 · Cited by 1,938
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
Power plant post-combustion carbon dioxide capture: An opportunity for membranes
Merkel, T. C., Lin, H., Wei, X., & Baker, R. (2010) · Journal of Membrane Science · doi:10.1016/j.memsci.2009.10.041 · Cited by 1,657
The characterization of activated carbons with oxygen and nitrogen surface groups
Biniak, S., Szymański, G., Siedlewski, J., & Świątkowski, A. (1997) · Carbon · doi:10.1016/s0008-6223(97)00096-1 · Cited by 1,513
CO2 capture and separation technologies for end-of-pipe applications – A review
Olajire, A. A. (2010) · Energy · doi:10.1016/j.energy.2010.02.030 · Cited by 1,217 · cited 4×
“The CO2 is separated with the concentration up to 99% through releasing the gas stream from the stripper[40-42].”
BackgroundInfluentialHigh Uptakes of CO2 and CH4 in Mesoporous Metal—Organic Frameworks MIL-100 and MIL-101
Llewellyn, P. L., Bourrelly, S., Serre, C., Vimont, A., Daturi, M., Hamon, L., De Weireld, G., Chang, J.-S., Hong, D.-Y., Kyu Hwang, Y., et al. (2008) · Langmuir · doi:10.1021/la800227x · Cited by 1,156
Oxy-fuel combustion of solid fuels
Toftegaard, M. B., Brix, J., Jensen, P. A., Glarborg, P., & Jensen, A. D. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2010.02.001 · Cited by 1,146
A review on surface modification of activated carbon for carbon dioxide adsorption
Shafeeyan, M. S., Daud, W. M. A. W., Houshmand, A., & Shamiri, A. (2010) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2010.07.006 · Cited by 1,128
Carbon nanotubes as adsorbents in environmental pollution management: A review
Ren, X., Chen, C., Nagatsu, M., & Wang, X. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.08.045 · Cited by 1,078
Progress and trends in CO2 capture/separation technologies: A review
Mondal, M. K., Balsora, H. K., & Varshney, P. (2012) · Energy · doi:10.1016/j.energy.2012.08.006 · Cited by 1,019
Abu-Zahra, M. R. M., Niederer, J. P. M., Feron, P. H. M., & Versteeg, G. F. (2007) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00032-1 · Cited by 857
Rapid Synthesis of Nitrogen‐Doped Porous Carbon Monolith for CO2 Capture
Hao, G., Li, W., Qian, D., & Lu, A. (2010) · Advanced Materials · doi:10.1002/adma.200903765 · Cited by 818
Powell, C. E., & Qiao, G. G. (2006) · Journal of Membrane Science · doi:10.1016/j.memsci.2005.12.062 · Cited by 815
Recent developments on carbon capture and storage: An overview
Pires, J. C. M., Martins, F. G., Alvim-Ferraz, M. C. M., & Simões, M. (2011) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2011.01.028 · Cited by 811
Carbon nanotube catalysts: recent advances in synthesis, characterization and applications
Yan, Y., Miao, J., Yang, Z., Xiao, F.-X., Yang, H. B., Liu, B., & Yang, Y. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00492b · Cited by 798
Surface-oxidized carbon fibers: I. Surface structure and chemistry
Zielke, U., Hüttinger, K. J., & Hoffman, W. P. (1996) · Carbon · doi:10.1016/0008-6223(96)00032-2 · Cited by 788
Zhang, Q., Huang, J., Qian, W., Zhang, Y., & Wei, F. (2013) · Small · doi:10.1002/smll.201203252 · Cited by 759
Cost and performance of fossil fuel power plants with CO2 capture and storage
Rubin, E. S., Chen, C., & Rao, A. B. (2007) · Energy Policy · doi:10.1016/j.enpol.2007.03.009 · Cited by 717
Review of CO2 storage efficiency in deep saline aquifers
Bachu, S. (2015) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2015.01.007 · Cited by 651
Adsorptive removal of carbon dioxide using polyethyleneimine-loaded mesoporous silica materials
Son, W.-J., Choi, J.-S., & Ahn, W.-S. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.10.049 · Cited by 618
Adsorption of dyes on activated carbons: influence of surface chemical groups
Pereira, M. F. R., Soares, S. F., Órfão, J. J. M., & Figueiredo, J. L. (2003) · Carbon · doi:10.1016/s0008-6223(02)00406-2 · Cited by 604
Carbon-Based Adsorbents for Postcombustion CO 2 Capture: A Critical Review
Creamer, A. E., & Gao, B. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b00627 · Cited by 598
Microwave-Assisted Synthesis of Metal–Organic Frameworks
Klinowski, J., Almeida Paz, F. A., Silva, P., & Rocha, J. (2011) · Dalton Trans. · doi:10.1039/c0dt00708k · Cited by 598
Flue gas treatment via CO2 adsorption
Sayari, A., Belmabkhout, Y., & Serna-Guerrero, R. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.02.007 · Cited by 594
Activated carbon for gas separation and storage
Sircar, S., Golden, T. C., & Rao, M. B. (1996) · Carbon · doi:10.1016/0008-6223(95)00128-x · Cited by 591
Idem, R., Wilson, M., Tontiwachwuthikul, P., Chakma, A., Veawab, A., Aroonwilas, A., & Gelowitz, D. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie050569e · Cited by 587
Perspectives on Microalgal CO2-Emission Mitigation Systems—A Review
Ho, S.-H., Chen, C.-Y., Lee, D.-J., & Chang, J.-S. (2011) · Biotechnology Advances · doi:10.1016/j.biotechadv.2010.11.001 · Cited by 580 · cited 1×
“Based on the principles of the capture process, it can be classified as adsorption, absorption, membrane separation, chemical reactions, as shown in Figure 2 [14-19].”
BackgroundOxy-fuel coal combustion—A review of the current state-of-the-art
Scheffknecht, G., Al-Makhadmeh, L., Schnell, U., & Maier, J. (2011) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2011.05.020 · Cited by 568
Reducing the Cost of CO 2 Capture from Flue Gases Using Pressure Swing Adsorption
Ho, M. T., Allinson, G. W., & Wiley, D. E. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie070831e · Cited by 566
On the nature of basic sites on carbon surfaces: an overview
Montes-Morán, M. A., Suárez, D., Menéndez, J. A., & Fuente, E. (2004) · Carbon · doi:10.1016/j.carbon.2004.01.023 · Cited by 566
CO2 adsorption in Y and X zeolites modified by alkali metal cation exchange
Walton, K. S., Abney, M. B., & Douglas LeVan, M. (2006) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.11.023 · Cited by 537
Opportunities and challenges in carbon dioxide capture
Spigarelli, B. P., & Kawatra, S. K. (2013) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2013.03.002 · Cited by 512
Mangun, C. L., Benak, K. R., Economy, J., & Foster, K. L. (2001) · Carbon · doi:10.1016/s0008-6223(00)00319-5 · Cited by 490
Comparative assessment of CO2 capture technologies for carbon-intensive industrial processes
Kuramochi, T., Ramírez, A., Turkenburg, W., & Faaij, A. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2011.05.001 · Cited by 474
CO2 Capture by As‐Prepared SBA‐15 with an Occluded Organic Template
Yue, M. B., Chun, Y., Cao, Y., Dong, X., & Zhu, J. H. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600427 · Cited by 424
An Adaptable Peptide-Based Porous Material
Rabone, J., Yue, Y.-F., Chong, S. Y., Stylianou, K. C., Bacsa, J., Bradshaw, D., Darling, G. R., Berry, N. G., Khimyak, Y. Z., Ganin, A. Y., et al. (2010) · Science · doi:10.1126/science.1190672 · Cited by 404
Favre, E. (2007) · Journal of Membrane Science · doi:10.1016/j.memsci.2007.02.007 · Cited by 402
Franchi, R. S., Harlick, P. J. E., & Sayari, A. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0504194 · Cited by 400
Adsorptive removal of selected pharmaceuticals by mesoporous silica SBA-15
Bui, T. X., & Choi, H. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.02.072 · Cited by 389
Recent advances in capture of carbon dioxide using alkali-metal-based oxides
Wang, S., Yan, S., Ma, X., & Gong, J. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01116b · Cited by 382
Concentration and recovery of carbon dioxide from flue gas by pressure swing adsorption
Kikkinides, E. S., Yang, R. T., & Cho, S. H. (1993) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00023a038 · Cited by 369
Plaza, M. G., García, S., Rubiera, F., Pis, J. J., & Pevida, C. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.07.030 · Cited by 365
Adsorption of CO2 on Amine-Functionalized Y-Type Zeolites
Su, F., Lu, C., Kuo, S.-C., & Zeng, W. (2010) · Energy & Fuels · doi:10.1021/ef901077k · Cited by 359
High‐Surface‐Area Carbon Molecular Sieves for Selective CO2 Adsorption
Wahby, A., Ramos‐Fernández, J. M., Martínez‐Escandell, M., Sepúlveda‐Escribano, A., Silvestre‐Albero, J., & Rodríguez‐Reinoso, F. (2010) · ChemSusChem · doi:10.1002/cssc.201000083 · Cited by 353
Carbon Capture and Storage from Fossil Fuel Use
Herzog, H., & Golomb, D. (2004) · Encyclopedia of Energy · doi:10.1016/b0-12-176480-x/00422-8 · Cited by 346
Efficient CO2 Capturer Derived from As‐Synthesized MCM‐41 Modified with Amine
Yue, M. B., Sun, L. B., Cao, Y., Wang, Y., Wang, Z. J., & Zhu, J. H. (2008) · Chemistry – A European Journal · doi:10.1002/chem.200701467 · Cited by 318
Toebes, M. L., van Heeswijk, J. M. P., Bitter, J. H., van Dillen, A. J., & de Jong, K. P. (2003) · Carbon · doi:10.1016/j.carbon.2003.10.036 · Cited by 317
Nonlinear grassland responses to past and future atmospheric CO2
Gill, R. A., Polley, H. W., Johnson, H. B., Anderson, L. J., Maherali, H., & Jackson, R. B. (2002) · Nature · doi:10.1038/417279a · Cited by 312
Capture of CO2 from flue gas via multiwalled carbon nanotubes
Su, F., Lu, C., Cnen, W., Bai, H., & Hwang, J. F. (2009) · Science of The Total Environment · doi:10.1016/j.scitotenv.2009.01.007 · Cited by 311
A Review of Carbon Nanotube Synthesis via Fluidized-Bed Chemical Vapor Deposition
See, C. H., & Harris, A. T. (2007) · Industrial & Engineering Chemistry Research · doi:10.1021/ie060955b · Cited by 306
Comparison of ammonia and monoethanolamine solvents to reduce CO2 greenhouse gas emissions
Yeh, A. C., & Bai, H. (1999) · Science of The Total Environment · doi:10.1016/s0048-9697(99)00025-x · Cited by 301
Zhang, J., Webley, P. A., & Xiao, P. (2008) · Energy Conversion and Management · doi:10.1016/j.enconman.2007.06.007 · Cited by 298
Chen, C., Liang, B., Ogino, A., Wang, X., & Nagatsu, M. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp9012015 · Cited by 293
Surface functionalities of multi-wall carbon nanotubes after UV/Ozone and TETA treatments
Sham, M.-L., & Kim, J.-K. (2006) · Carbon · doi:10.1016/j.carbon.2005.09.013 · Cited by 290
House, K. Z., Harvey, C. F., Aziz, M. J., & Schrag, D. P. (2009) · Energy & Environmental Science · doi:10.1039/b811608c · Cited by 284
A review of N-functionalized solid adsorbents for post-combustion CO2 capture
Hu, X. (., Liu, L., Luo, X., Xiao, G., Shiko, E., Zhang, R., Fan, X., Zhou, Y., Liu, Y., Zeng, Z., et al. (2020) · Applied Energy · doi:10.1016/j.apenergy.2019.114244 · Cited by 282
Self-citationCO2 absorption and regeneration of alkali metal-based solid sorbents
Lee, S. C., Choi, B. Y., Lee, T. J., Ryu, C. K., Ahn, Y. S., & Kim, J. C. (2006) · Catalysis Today · doi:10.1016/j.cattod.2005.10.051 · Cited by 279
Absorption of CO2 in the aqueous solutions of functionalized ionic liquids and MDEA
Feng, Z., Cheng-Gang, F., You-Ting, W., Yuan-Tao, W., Ai-Min, L., & Zhi-Bing, Z. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.04.013 · Cited by 274
Harada, T., Simeon, F., Hamad, E. Z., & Hatton, T. A. (2015) · Chemistry of Materials · doi:10.1021/cm503295g · Cited by 245
Chilled ammonia process for CO2 capture
Darde, V., Thomsen, K., van Well, W. J. M., & Stenby, E. H. (2010) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2009.10.005 · Cited by 232
Corrosion in MEA units for CO2 capture: Pilot plant studies
Kittel, J., Idem, R., Gelowitz, D., Tontiwachwuthikul, P., Parrain, G., & Bonneau, A. (2009) · Energy Procedia · doi:10.1016/j.egypro.2009.01.105 · Cited by 228
Zhao, C., Chen, X., Anthony, E. J., Jiang, X., Duan, L., Wu, Y., Dong, W. G., & Zhao, C. (2013) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2013.05.001 · Cited by 209
Pressure swing adsorption for carbon dioxide sequestration from exhaust gases
Gomes, V. G., & Yee, K. W. K. (2002) · Separation and Purification Technology · doi:10.1016/s1383-5866(02)00064-3 · Cited by 209
Belmabkhout, Y., Serna-Guerrero, R., & Sayari, A. (2009) · Chemical Engineering Science · doi:10.1016/j.ces.2009.03.017 · Cited by 202
Technology for removing carbon dioxide from power plant flue gas by the physical adsorption method
Ishibashi, M., Ota, H., Akutsu, N., Umeda, S., Tajika, M., Izumi, J., Yasutake, A., Kabata, T., & Kageyama, Y. (1996) · Energy Conversion and Management · doi:10.1016/0196-8904(95)00279-0 · Cited by 200
An Interpenetrated Framework Material with Hysteretic CO2 Uptake
Mulfort, K. L., Farha, O. K., Malliakas, C. D., Kanatzidis, M. G., & Hupp, J. T. (2010) · Chemistry – A European Journal · doi:10.1002/chem.200902104 · Cited by 200
Ko, D., Siriwardane, R., & Biegler, L. T. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie050012z · Cited by 197
Advancement in porous adsorbents for post-combustion CO2 capture
Modak, A., & Jana, S. (2019) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2018.09.018 · Cited by 196
CO2 capture from dry flue gas by means of VPSA, TSA and TVSA
Jiang, N., Shen, Y., Liu, B., Zhang, D., Tang, Z., Li, G., & Fu, B. (2020) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2019.09.012 · Cited by 195
CO2 capture from gas stream by zeolite 13X using a dual-column temperature/vacuum swing adsorption
Su, F., & Lu, C. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22647b · Cited by 191
On the difference between the isoelectric point and the point of zero charge of carbons
Menéndez, J. A., Illán-Gómez, M. J., y León, C. A. L., & Radovic, L. R. (1995) · Carbon · doi:10.1016/0008-6223(95)96817-r · Cited by 189
Su, X., Bromberg, L., Martis, V., Simeon, F., Huq, A., & Hatton, T. A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b02471 · Cited by 189
Capture technologies: Improvements and promising developments
Blomen, E., Hendriks, C., & Neele, F. (2009) · Energy Procedia · doi:10.1016/j.egypro.2009.01.197 · Cited by 188
Post-combustion CO2 capture by aqueous ammonia: A state-of-the-art review
Zhao, B., Su, Y., Tao, W., Li, L., & Peng, Y. (2012) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2012.05.006 · Cited by 187
Numerical parametric study on CO2 capture by indirect thermal swing adsorption
Clausse, M., Merel, J., & Meunier, F. (2011) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2011.05.036 · Cited by 185
Ultrahigh CO2 adsorption capacity on carbon molecular sieves at room temperature
Silvestre-Albero, J., Wahby, A., Sepúlveda-Escribano, A., Martínez-Escandell, M., Kaneko, K., & Rodríguez-Reinoso, F. (2011) · Chemical Communications · doi:10.1039/c1cc11618e · Cited by 184
Maring, B. J., & Webley, P. A. (2013) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2013.01.009 · Cited by 183
Carbon dioxide capture and recovery by means of TSA and/or VSA
Tlili, N., Grévillot, G., & Vallières, C. (2009) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2009.04.005 · Cited by 182
Recent Membrane Developments for CO2 Separation and Capture
Norahim, N., Yaisanga, P., Faungnawakij, K., Charinpanitkul, T., & Klaysom, C. (2018) · Chemical Engineering & Technology · doi:10.1002/ceat.201700406 · Cited by 180
László, K., & Szűcs, A. (2001) · Carbon · doi:10.1016/s0008-6223(01)00005-7 · Cited by 161
Chilled ammonia process for CO2 capture
Darde, V., Thomsen, K., van Well, W. J. M., & Stenby, E. H. (2009) · Energy Procedia · doi:10.1016/j.egypro.2009.01.137 · Cited by 158
Wang, L., Yang, Y., Shen, W., Kong, X., Li, P., Yu, J., & Rodrigues, A. E. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4009716 · Cited by 154
Comparative study of chemical absorbents in postcombustion CO2 capture
Pellegrini, G., Strube, R., & Manfrida, G. (2009) · Energy · doi:10.1016/j.energy.2009.08.011 · Cited by 147
Advanced adsorbents based on MgO and K2CO3 for capture of CO2 at elevated temperatures
Xiao, G., Singh, R., Chaffee, A. L., & Webley, P. A. (2011) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2011.04.002 · Cited by 146
Kinetics studies on wet and dry gas–solid carbonation of MgO and Mg(OH)2 for CO2 sequestration
Fagerlund, J., Highfield, J., & Zevenhoven, R. (2012) · RSC Advances · doi:10.1039/c2ra21428h · Cited by 146
Adsorption kinetics for CO2 on highly selective zeolites NaKA and nano-NaKA
Cheung, O. Y. H., Bacsik, Z., Liu, Q., Mace, A., & Hedin, N. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.01.017 · Cited by 141
Amination of Activated Carbon and Adsorption Characteristics of Its Aminated Surface
Abe, M., Kawashima, K., Kozawa, K., Sakai, H., & Kaneko, K. (2000) · Langmuir · doi:10.1021/la990976t · Cited by 137
CO2 capture by electrothermal swing adsorption with activated carbon fibre materials
An, H., Feng, B., & Su, S. (2010) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2010.03.007 · Cited by 135
CO2 adsorption onto synthetic activated carbon: Kinetic, thermodynamic and regeneration studies
Balsamo, M., BUDINOVA, T., Erto, A., Lancia, A., Petrova, B., Petrov, N. V., & Tsyntsarski, B. (2013) · Separation and Purification Technology · doi:10.1016/j.seppur.2013.05.041 · Cited by 130
Rate based modeling of absorption and regeneration for CO2 capture by aqueous ammonia solution
Zhang, M., & Guo, Y. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.074 · Cited by 127
Xian, S., Xu, F., Ma, C., Wu, Y., Xia, Q., Wang, H., & Li, Z. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.06.042 · Cited by 126
Dissociation constants of some alkanolamines at 293, 303, 318, and 333 K
Littel, R. J., Bos, M., & Knoop, G. J. (1990) · Journal of Chemical & Engineering Data · doi:10.1021/je00061a014 · Cited by 126
Adsorption of valeric acid from aqueous solution onto activated carbons: role of surface basic sites
Elsayed, Y., & Bandosz, T. J. (2003) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2003.10.006 · Cited by 125
Absorption of carbon dioxide in aqueous ammonia
Liu, J., Wang, S., Zhao, B., Tong, H., & Chen, C. (2009) · Energy Procedia · doi:10.1016/j.egypro.2009.01.124 · Cited by 123
The Kerr-McGee/ABB Lummus Crest technology for the recovery of CO2 from stack gases
Barchas, R., & Davis, R. (1992) · Energy Conversion and Management · doi:10.1016/0196-8904(92)90028-u · Cited by 119
Ma, S., Sun, D., Yuan, D., Wang, X.-S., & Zhou, H.-C. “. (2009) · Journal of the American Chemical Society · doi:10.1021/ja808896f · Cited by 118
Xian, S., Wu, Y., Wu, J., Wang, X., & Xiao, J. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b03517 · Cited by 116
Continuous CO2 capture in a circulating fluidized bed using supported amine sorbents
Veneman, R., Li, Z. S., Hogendoorn, J. A., Kersten, S. R. A., & Brilman, D. W. F. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.06.100 · Cited by 110
Reversible Structural Change of Cu-MOF on Exposure to Water and Its CO2 Adsorptivity
Cheng, Y. K., Kondo, A., Noguchi, H., Kajiro, H., Urita, K., Ohba, T., Kaneko, K., & Kanoh, H. (2009) · Langmuir · doi:10.1021/la803818p · Cited by 107
Science of Carbon Storage in Deep Saline Formations
(2018) · Elsevier eBooks · doi:10.1016/c2016-0-03237-0 · Cited by 102
Pirngruber, G. D., Guillou, F., Gomez, A., & Clausse, M. (2013) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2013.01.010 · Cited by 99
Membrane contactor applications
Klaassen, R., Feron, P. H. M., & Jansen, A. E. (2008) · Desalination · doi:10.1016/j.desal.2007.02.083 · Cited by 97
Recent progress on submicron gas-selective polymeric membranes
Wang, M., Zhao, J., Wang, X., Liu, A., & Gleason, K. K. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01862b · Cited by 87
Liu, Q., Shi, Y., Zheng, S., Ning, L., Ye, Q., Tao, M., & He, Y. (2014) · Journal of Energy Chemistry · doi:10.1016/s2095-4956(14)60124-8 · Cited by 82
Flue gas treatment by activated carbon obtained from oil-fired fly ash
Davini, P. (2002) · Carbon · doi:10.1016/s0008-6223(02)00049-0 · Cited by 81
Won, W., Lee, S., & Lee, K. S. (2011) · Separation and Purification Technology · doi:10.1016/j.seppur.2011.09.056 · Cited by 76
Study of a Modified Amine-Based Regeneration Unit
Tobiesen, F. A., & Svendsen, H. F. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie050544f · Cited by 73
Martín, C. F., Sweatman, M. B., Brandani, S., & Fan, X. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.09.081 · Cited by 73
Self-citationThe dry carbonate process: Carbon dioxide recovery from power plant flue gas
Nelson, T. O., Coleman, L., Green, D. A., & Gupta, R. (2009) · Energy Procedia · doi:10.1016/j.egypro.2009.01.171 · Cited by 69
Corrosion in CO 2 Post-Combustion Capture with Alkanolamines – A Review
Kittel, J., & Gonzalez, S. (2013) · Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles · doi:10.2516/ogst/2013161 · Cited by 69
Carbon capture : sequestration and storage
Chapman, S., Gibbins, J., Harrison, R. M., Hester, R. E., Kitidis, V., Lackner, K. S., Logue, P., Nijnik, M., Pocklington, D., Riley, N., et al. (2009) · Royal Society of Chemistry eBooks · Cited by 68
Acetaldehyde Adsorption on Nitrogen-Containing Activated Carbons
Elsayed, Y., & Bandosz, T. J. (2002) · Langmuir · doi:10.1021/la0116948 · Cited by 67
Colloidal processing and CO2 capture performance of sacrificially templated zeolite monoliths
Akhtar, F., Andersson, L., Keshavarzi, N., & Bergström, L. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.12.064 · Cited by 62
Wu, Z., Hao, N., Xiao, G., Liu, L., Webley, P. A., & Zhao, D. (2010) · Physical Chemistry Chemical Physics · doi:10.1039/c0cp01807d · Cited by 62
The chemical CO2 capture by carbonation-decarbonation cycles
Liu, J., Baeyens, J., Deng, Y., Tan, T., & Zhang, H. (2020) · Journal of Environmental Management · doi:10.1016/j.jenvman.2019.110054 · Cited by 62
Self-citationCharacteristics of cross-flow rotating packed beds
Lin, C., & Chen, B.-C. (2008) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2008.01.004 · Cited by 59
Dincă, C., & Badea, A. A. (2012) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2012.11.006 · Cited by 57
Dasgupta, S., Biswas, N., Aarti, A., Gode, N. G., Divekar, S., Nanoti, A., & Goswami, A. N. (2011) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2011.10.007 · Cited by 50
Xu, D. Y., Zhang, J., Li, G., Xiao, P., Webley, P. A., & Yu-chun, Z. (2011) · Journal of Fuel Chemistry and Technology · doi:10.1016/s1872-5813(11)60016-9 · Cited by 49
Pelkie, J. E., Concannon, P. J., Manley, D. B., & Poling, B. E. (1992) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00009a018 · Cited by 46
CO2 capture in a continuous gas–solid trickle flow reactor
Veneman, R., Hilbers, T. J., Brilman, D. W. F., & Kersten, S. R. A. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.12.066 · Cited by 46
Passive CO2 removal using a carbon fiber composite molecular sieve
Burchell, T. D., & Judkins, R. R. (1996) · Energy Conversion and Management · doi:10.1016/0196-8904(95)00282-0 · Cited by 40
Castro, M., Warrender, S. J., Wright, P. A., Apperley, D. C., Belmabkhout, Y., Pirngruber, G. D., Min, H., Park, M. B., & Hong, S. B. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp904623a · Cited by 40
Carbon capture Sequestration and storage
Hester, R. E., Harrison, R. M., & Lackner, K. S. (2009) · Cited by 39
Oxygen-Induced Decrease in the Equilibrium Adsorptive Capacities of Activated Carbons
Ania, C. O., Parra, J. B., & Pis, J. J. (2004) · Adsorption Science & Technology · doi:10.1260/0263617041514875 · Cited by 37
Kim, Y., Lim, S., & Park, J. M. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.09.087 · Cited by 34
Mixed Alkanolamines with Low Regeneration Energy for CO2 Capture in a Rotating Packed Bed
Yu, C., & Tan, C. (2013) · Energy Procedia · doi:10.1016/j.egypro.2013.05.131 · Cited by 34
Biological and chemical treatment technologies for waste amines from CO2 capture plants
Ghayur, A., Verheyen, T. V., & Meuleman, E. (2018) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.07.033 · Cited by 34
Ammonia: a reactive medium for catalysed coal gasification
Bota, K. B., & Abotsi, G. M. K. (1994) · Fuel · doi:10.1016/0016-2361(94)90313-1 · Cited by 33
Ahn, C. K., Lee, H. W., Lee, M. W., Chang, Y., Han, K., Rhee, C. H., Kim, J. Y., Chun, H. D., & Park, J. M. (2011) · Energy Procedia · doi:10.1016/j.egypro.2011.01.086 · Cited by 32
Chen, H., Mu, Y., Hardacre, C., & Fan, X. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c01067 · Cited by 31
Self-citationPirklbauer, J., Schöny, G., Pröll, T., & Hofbauer, H. (2018) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2018.03.018 · Cited by 28
Nitrogen-doped porous carbon prepared from a liquid carbon precursor for CO 2 adsorption
Zhang, X., Lin, D., & Chen, W. (2015) · RSC Advances · doi:10.1039/c5ra08014b · Cited by 27
Properties of the Zeolite, Faujasite, Substitutional Series: A Review with New Data
Stamires, D. N. (1973) · Clays and Clay Minerals · doi:10.1346/ccmn.1973.0210514 · Cited by 26
(2010) · Elsevier eBooks · doi:10.1016/c2009-0-18515-x · Cited by 22
Synthesis of Micro/Mesoporous Composites and Their Application as CO2 Adsorbents
Ma, Y., Zhao, H., Sheng-jie, T., Hu, J., & Liu, H. (2011) · Acta Physico-Chimica Sinica · doi:10.3866/pku.whxb20110335 · Cited by 21
Reddy, S., Scherffius, J. R., Yonkoski, J., et al. (2013) · Energy Procedia · doi:10.1016/j.egypro.2013.06.550 · Cited by 20
Capturing CO2 from Coal-Fired Power Plants: Challenges for a Comprehensive Strategy
Parker, L. B., Folger, P. F., & Stine, D. D. (2008) · University of North Texas Digital Library (University of North Texas) · Cited by 13
Capture of Carbon Dioxide by Modified Multiwalled Carbon Nanotubes
Lu, C., Wu, B., Chen, W., Lin, Y.-K., & Bai, H. (2010) · Elsevier eBooks · doi:10.1016/b978-0-08-054820-3.00004-6 · Cited by 12
Measurement of the interfacial area during CO2 capture with alkanolamines
Maceiras, R., & Cancela, Á. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.06.014 · Cited by 12
Cited by
Adsorption of Carbon Dioxide for post-combustion capture: a review
Raganati, F., Miccio, F., & Ammendola, P. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c01618 · Cited by 661
Madejski, P., Chmiel, K., Subramanian, N., & Kuś, T. (2022) · Energies · doi:10.3390/en15030887 · Cited by 485
McLaughlin, H., Littlefield, A. A., Menefee, M., Kinzer, A., Hull, T., Sovacool, B. K., Bazilian, M. D., Kim, J., & Griffiths, S. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113215 · Cited by 448
Sorption direct air capture with CO2 utilization
Jiang, L., Liu, W., Wang, R. Q., Gonzalez-Diaz, A., Rojas-Michaga, M. F., Michailos, S., Pourkashanian, M., Zhang, X. J., & Font-Palma, C. (2023) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101069 · Cited by 318
Review of solvent based carbon-dioxide capture technologies
Mumford, K. A., Wu, Y., Smith, K. H., & Stevens, G. W. (2015) · Frontiers of Chemical Science and Engineering · doi:10.1007/s11705-015-1514-6 · Cited by 311
Metadata
- Authors
- Chao, C., Deng, Y., Dewil, R., Baeyens, J., & Fan, X.
- Venue
- Renewable and Sustainable Energy Reviews
- Publisher
- Elsevier BV
- Published
- 2021-03
- Volume
- 138
- Pages
- 110490
- ISSN
- 1364-0321 (ISSN-L)
- OpenAlex
- W2140602829
- Cited by
- 652
- References
- 149
- FWCI
- 26.69
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.