The DOI matches its Crossref record; 129 of the 129 references it cites were found in a registry or an index.
Phase change materials integrated into building walls: An updated review
Open accessAbstract
This paper is an updated, but totally new, version of “A review on phase change materials (PCMs) integrated in building walls”, an article published in 2011 in Renewable and Sustainable Energy Reviews. Both numerical and experimental studies on building walls containing PCMs during the last ten years (2011–2020) are reviewed. The paper also summarizes the main PCMs used in this application and the recent progress in the integration techniques of PCMs in building construction elements. Most of the proposed studies (about 66%) are focused on PCM in walls. In addition, more than half of these studies are numerical where several assumptions are made such as the neglected of both the occupant presence in the building and its behaviour. Based on this review, it is concluded that the used PCMs in building walls showed good potential for reducing both indoor air temperature fluctuations and energy consumption. However, further numerical and experimental studies are needed that take other aspects into consideration, such as the real use of buildings with the occupant behaviour, the economic viability and the environmental impact. This review paper will help scientific researchers and engineers to update the integration techniques of PCM in building walls and to define potential future research works.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Materials used as PCM in thermal energy storage in buildings: A review
Cabeza, L. F., Castell, A., Barreneche, C., de Gracia, A., & Fernández, A. I. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.11.018 · Cited by 1,889
Low temperature latent heat thermal energy storage: Heat storage materials
Abhat, A. (1983) · Solar Energy · doi:10.1016/0038-092x(83)90186-x · Cited by 1,711
A review on phase change material (PCM) for sustainable passive cooling in building envelopes
Akeiber, H., Nejat, P., Majid, M. Z. A., Wahid, M. A., Jomehzadeh, F., Zeynali Famileh, I., Calautit, J. K., Hughes, B. R., & Zaki, S. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.03.036 · Cited by 1,075
A review on phase change materials integrated in building walls
Kuznik, F., David, D., Johannes, K., & Roux, J.-J. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.08.019 · Cited by 1,057
Self-citationPhase change materials (PCM) for cooling applications in buildings: A review
Souayfane, F., Fardoun, F., & Biwole, P.-H. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.04.006 · Cited by 813
Development of phase change materials based microencapsulated technology for buildings: A review
Tyagi, V. V., Kaushik, S. C., Tyagi, S. K., & Akiyama, T. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.10.006 · Cited by 779
Phase change materials integrated in building walls: A state of the art review
Memon, S. A. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.12.042 · Cited by 725
A review of phase change material and performance enhancement method for latent heat storage system
Tao, Y. B., & He, Y.-L. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.05.028 · Cited by 633
Phase change material (PCM) storage for free cooling of buildings—A review
Waqas, A., & Ud Din, Z. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.10.034 · Cited by 532
Phase change material thermal energy storage systems for cooling applications in buildings: A review
Faraj, K., Khaled, M., Faraj, J., Hachem, F., & Castelain, C. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109579 · Cited by 519
Tauseef-ur-Rehman, Ali, H. M., Janjua, M. M., Sajjad, U., & Yan, W.-M. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.02.001 · Cited by 507
Review on using microencapsulated phase change materials (PCM) in building applications
Konuklu, Y., Ostry, M., Paksoy, H. O., & Charvat, P. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.07.019 · Cited by 430
Phase change materials and energy efficiency of buildings: A review of knowledge
da Cunha, S. R. L., & de Aguiar, J. L. B. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2019.101083 · Cited by 428
Review on building energy performance improvement using phase change materials
Song, M., Niu, F., Mao, N., Hu, Y., & Deng, S. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2017.10.066 · Cited by 418
Potential of macroencapsulated PCM for thermal energy storage in buildings : a comprehensive review
Rathore, P. K. S., & Shukla, S. K. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.07.221 · Cited by 396
Lei, J., Yang, J., & Yang, E.-H. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.10.031 · Cited by 382
Faraj, K., Khaled, M., Faraj, J., Hachem, F., & Castelain, C. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2020.101913 · Cited by 354
A review on the application of Trombe wall system in buildings
Hu, Z., He, W., Ji, J., & Zhang, S. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.12.003 · Cited by 349
Ascione, F., Bianco, N. D., Masi, R. F. D., de Rossi, F., & Vanoli, G. P. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.08.045 · Cited by 344
Saffari, M., de Gracia, A., Fernández, C., & Cabeza, L. F. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.05.107 · Cited by 343
Modeling phase change materials embedded in building enclosure: A review
Al-Saadi, S. N., & Zhai, Z. J. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.01.024 · Cited by 333
Arıcı, M., Bilgin, F., Nižetić, S., & Karabay, H. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114560 · Cited by 324
A review on macro-encapsulated phase change material for building envelope applications
Liu, Z., Yu, Z. (., Yang, T., Qin, D., Li, S., Zhang, G., Haghighat, F., & Joybari, M. M. (2018) · Building and Environment · doi:10.1016/j.buildenv.2018.08.030 · Cited by 322
Li, Z. X., Al-Rashed, A. A. A. A., Rostamzadeh, M., Kalbasi, R., Shahsavar, A., & Afrand, M. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.04.075 · Cited by 312
Passive thermal control in residential buildings using phase change materials
Kenisarin, M., & Mahkamov, K. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.128 · Cited by 296
Navarro, L., de Gracia, A., Niall, D., Castell, A., Browne, M., McCormack, S. J., Griffiths, P., & Cabeza, L. F. (2016) · Renewable Energy · doi:10.1016/j.renene.2015.06.064 · Cited by 283
Energy and economic analysis of building integrated with PCM in different cities of China
Mi, X., Liu, R., Cui, H., Memon, S. A., Xing, F., & Lo, T. Y. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.05.032 · Cited by 273
Evola, G., Marletta, L., & Sicurella, F. (2013) · Building and Environment · doi:10.1016/j.buildenv.2012.09.021 · Cited by 269
Combined experimental and numerical evaluation of a prototype nano-PCM enhanced wallboard
Biswas, K., Lu, J., Soroushian, P., & Shrestha, S. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.02.047 · Cited by 257
Ramakrishnan, S., Wang, X., Sanjayan, J., & Wilson, J. (2017) · Applied Energy · doi:10.1016/j.apenergy.2016.04.084 · Cited by 241
Integration of passive PCM technologies for net-zero energy buildings
Stritih, U., Tyagi, V. V., Stropnik, R., Paksoy, H., Haghighat, F., & Joybari, M. M. (2018) · Sustainable Cities and Society · doi:10.1016/j.scs.2018.04.036 · Cited by 238
Saffari, M., de Gracia, A., Ushak, S., & Cabeza, L. F. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.139 · Cited by 229
Latent heat storage in concrete
Hawes, D. W., Banu, D., & Feldman, D. G. (1989) · Solar Energy Materials · doi:10.1016/0165-1633(89)90014-2 · Cited by 225
Benefits of PCM underfloor heating with PCM wallboards for space heating in winter
Devaux, P., & Farid, M. M. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.01.060 · Cited by 223
PCM-mortar based construction materials for energy efficient buildings: A review on research trends
Rao, V. V., Parameshwaran, R., & Ram, V. V. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2017.09.098 · Cited by 219
Potential of microencapsulated PCM for energy savings in buildings: A critical review
Singh Rathore, P. K., Shukla, S. K., & Gupta, N. K. (2020) · Sustainable Cities and Society · doi:10.1016/j.scs.2019.101884 · Cited by 216
On the importance of the location of PCMs in building walls for enhanced thermal performance
Jin, X., Medina, M. A., & Zhang, X. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.12.079 · Cited by 216
Critical review of latent heat storage systems for free cooling in buildings
Zeinelabdein, R., Omer, S., & Gan, G. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.10.046 · Cited by 216
Kuznik, F., Virgone, J., & Johannes, K. (2011) · Renewable Energy · doi:10.1016/j.renene.2010.11.008 · Cited by 213
Self-citationKong, X., Lu, S., Li, Y., Huang, J., & Liu, S. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.06.044 · Cited by 209
Shi, X., Memon, S. A., Tang, W., Cui, H., & Xing, F. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.12.001 · Cited by 195
Guarino, F., Athienitis, A. K., Cellura, M., & Bastien, D. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.10.046 · Cited by 192
Lee, K. O., Medina, M. A., Sun, X., & Jin, X. (2018) · Solar Energy · doi:10.1016/j.solener.2018.01.086 · Cited by 190
A numerical study of external building walls containing phase change materials (PCM)
Izquierdo-Barrientos, M. A., Belmonte, J. F., Rodríguez-Sánchez, D., Molina, A. E., & Almendros-Ibáñez, J. A. (2012) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.02.038 · Cited by 189
Nghana, B., & Tariku, F. A. (2016) · Building and Environment · doi:10.1016/j.buildenv.2016.01.023 · Cited by 186
Ahangari, M., & Maerefat, M. (2018) · Sustainable Cities and Society · doi:10.1016/j.scs.2018.09.008 · Cited by 186
Recent development on heat transfer and various applications of phase-change materials
Yang, L., Jin, X., Zhang, Y., & Du, K. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124432 · Cited by 183
Mandilaras, I. D., Stamatiadou, M., Katsourinis, D. I., Zannis, G., & Founti, M. A. (2012) · Building and Environment · doi:10.1016/j.buildenv.2012.12.007 · Cited by 174
Berardi, U., & Soudian, S. (2019) · Energy and Buildings · doi:10.1016/j.enbuild.2018.12.016 · Cited by 174
Oliver, A. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2012.01.026 · Cited by 173
Investigation of heat transfer of a building wall in the presence of phase change material (PCM)
Khan, R. J., Bhuiyan, M. Z. H., & Ahmed, D. H. (2020) · Energy and Built Environment · doi:10.1016/j.enbenv.2020.01.002 · Cited by 171
Yao, C., Kong, X., Li, Y., Du, Y., & Qi, C. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.10.052 · Cited by 170
Wahid, M. B. A., Hosseini, S. E., Hussen, H. M., Akeiber, H. J., Saud, S. N., & Mohammad, A. T. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.07.032 · Cited by 168
Wang, H., Lu, W., Wu, Z., & Zhang, G. (2020) · Renewable Energy · doi:10.1016/j.renene.2019.05.124 · Cited by 167
Zwanzig, S. D., Lian, Y., & Brehob, E. G. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.02.003 · Cited by 166
Barzin, R., Chen, J. J. J., Young, B. R., & Farid, M. M. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.03.027 · Cited by 166
Kheradmand, M., Azenha, M., de Aguiar, J. L. B., & Castro-Gomes, J. P. (2015) · Energy · doi:10.1016/j.energy.2015.10.131 · Cited by 163
Review of Phase Change Materials Integrated in Building Walls for Energy Saving
Cui, Y., Xie, J., Liu, J., & Pan, S. (2015) · Procedia Engineering · doi:10.1016/j.proeng.2015.09.027 · Cited by 163
Yang, Y., Wu, W., Fu, S., & Zhang, H. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118479 · Cited by 159
Chan, A. L. S. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2011.07.021 · Cited by 152
Zhu, N., Li, S., Hu, P., Wei, S., Deng, R., & Lei, F. (2018) · Sustainable Cities and Society · doi:10.1016/j.scs.2018.08.028 · Cited by 152
Sovetova, M., Memon, S. A., & Kim, J. R. (2019) · Solar Energy · doi:10.1016/j.solener.2019.07.067 · Cited by 150
Application of phase change materials in gypsum boards to meet building energy conservation goals
Sharifi, N. P., Shaikh, A. A. N., & Sakulich, A. R. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.12.046 · Cited by 148
Application of phase change material foam composites in the built environment: A critical review
Ikutegbe, C. A., & Farid, M. M. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110008 · Cited by 138
Realization, test and modelling of honeycomb wallboards containing a Phase Change Material
Hasse, C., Grenet, M., Bontemps, A., Dendievel, R., & Sallee, H. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.09.017 · Cited by 135
Parametric analysis of influencing factors in Phase Change Material Wallboard (PCMW)
Zhou, D., Shire, G. S. F., & Tian, Y. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.12.059 · Cited by 134
Ye, H., Long, L., Zhang, H., & Zou, R. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.08.067 · Cited by 134
Bahrar, M., Djamaï, Z. I., Mankibi, M. E., Larbi, A. S., & Salvia, M. (2018) · Sustainable Cities and Society · doi:10.1016/j.scs.2018.06.014 · Cited by 133
Sayyar, M., Weerasiri, R. R., Soroushian, P., & Lu, J. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.02.018 · Cited by 127
Xie, J., Wang, W., Liu, J., & Pan, S. (2018) · Solar Energy · doi:10.1016/j.solener.2018.01.069 · Cited by 123
Phase Change Materials (PCMs) and Their Optimum Position in Building Walls
Al-Absi, Z. A., Isa, M. H. M., & Ismail, M. (2020) · Sustainability · doi:10.3390/su12041294 · Cited by 122
Jin, X., Medina, M. A., & Zhang, X. (2014) · Energy · doi:10.1016/j.energy.2014.06.079 · Cited by 121
Study of the thermal behavior of the composite phase change material (PCM) room in summer and winter
Meng, E., Yu, H., & Zhou, B. R. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.07.110 · Cited by 121
Parametric analysis of using PCM walls for heating loads reduction
Wang, Q., Wu, R., Wu, Y., & Zhao, C. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.05.012 · Cited by 120
Thermal analysis of a ventilated facade with PCM for cooling applications
de Gracia, Á., Navarro, L., Castell, A., Ruiz–Pardo, Á., Domínguez, S. Á., & Cabeza, L. F. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.06.032 · Cited by 119
Li, C., Yu, H., Song, Y., & Liu, Z. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.01.036 · Cited by 115
Kong, X., Wang, L., Li, H., et al. (2019) · Solar Energy · doi:10.1016/j.solener.2019.11.081 · Cited by 114
Zhu, N., Hu, N., Hu, P., Lei, F., & Li, S. (2018) · Energy · doi:10.1016/j.energy.2018.11.042 · Cited by 110
Use of microencapsulated PCM in buildings and the effect of adding awnings
Arce, P., Castellón, C., Castell, A., & Cabeza, L. F. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2011.10.028 · Cited by 109
Wijesuriya, S., Brandt, M., & Tabares-Velasco, P. C. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.03.119 · Cited by 104
Evola, G., Marletta, L., & Sicurella, F. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.11.089 · Cited by 103
Kong, X., Jie, P., Yao, C., & Liu, Y. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.08.176 · Cited by 98
Wi, S., Chang, S. J., & Kim, S. (2020) · Sustainable Cities and Society · doi:10.1016/j.scs.2020.102067 · Cited by 98
Jeong, S., Wi, S., Chang, S. J., Lee, J., & Kim, S. (2019) · Energy and Buildings · doi:10.1016/j.enbuild.2019.02.037 · Cited by 94
Tyagi, V. V., Buddhi, D., Kothari, R., & Tyagi, S. K. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2012.05.023 · Cited by 92
Mourid, A., Alami, M. E., & Kuznik, F. (2018) · Sustainable Cities and Society · doi:10.1016/j.scs.2018.04.031 · Cited by 89
Self-citationZhou, Y., Yu, C. W., & Zhang, G. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.04.083 · Cited by 85
Experimental study on the performance of a novel RC-PCM-wall
He, W., Yu, C., Yang, J., Yu, B., Hu, Z., Shen, D., Liu, X., Qin, M., & Chen, H. (2019) · Energy and Buildings · doi:10.1016/j.enbuild.2019.07.001 · Cited by 83
A new method to estimate optimal phase change material characteristics in a passive solar room
Jiang, F., Wang, X., & Zhang, Y. (2011) · Energy Conversion and Management · doi:10.1016/j.enconman.2010.12.051 · Cited by 82
Zhou, G., Yang, Y., & Xu, H. J. (2011) · Solar Energy · doi:10.1016/j.solener.2010.12.028 · Cited by 81
Designing building envelope with PCM wallboards: Design tool development
Bastani, A., Haghighat, F., & Koziński, J. A. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.12.031 · Cited by 80
Jayalath, A., Aye, L., Mendis, P. A., & Ngo, T. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.04.007 · Cited by 80
Kong, X., Yao, C., Jie, P., Liu, Y., Qi, C., & Rong, X. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.06.067 · Cited by 78
Modeling of phase change materials for applications in whole building simulation
Mirzaei, P. A., & Haghighat, F. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.04.053 · Cited by 77
Li, L., Yu, H., & Liu, R. (2017) · Building and Environment · doi:10.1016/j.buildenv.2017.07.019 · Cited by 77
A new validated TRNSYS module for simulating latent heat storage walls
Al-Saadi, S. N., & Zhai, Z. J. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.10.013 · Cited by 75
Li, C., Yu, H., Song, Y., Tang, Y., Chen, P., Hu, H., Wang, M., & Liu, Z. (2019) · Journal of Building Engineering · doi:10.1016/j.jobe.2019.101051 · Cited by 73
Barzin, R., Chen, J. J. J., Young, B. R., & Farid, M. M. (2021) · CRC Press eBooks · doi:10.1201/9780367567699-19 · Cited by 69
Sun, X., Medina, M. A., Lee, K. O., & Jin, X. (2018) · Energy · doi:10.1016/j.energy.2018.08.159 · Cited by 68
Han, Y., & Taylor, J. E. (2016) · Sustainable Cities and Society · doi:10.1016/j.scs.2016.03.001 · Cited by 67
Yang, L., Qiao, Y., Liu, Y., Zhang, X., Zhang, C., & Liu, J. (2018) · Building and Environment · doi:10.1016/j.buildenv.2018.08.020 · Cited by 67
Kim, H. B., Masayuki, M. A. E., Choi, Y., & Kiyota, T. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.07.076 · Cited by 64
Sun, X., Zhang, Q., Medina, M. A., Lee, K. O., & Liao, S. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.04.096 · Cited by 63
Barzin, R., Chen, J. J. J., Young, B. R., & Farid, M. M. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.11.016 · Cited by 61
Zhou, D., & Eames, P. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.02.109 · Cited by 61
Akeiber, H. J., Hosseini, S. E., Hussen, H. M., Wahid, M. B. A., & Mohammad, A. T. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.07.043 · Cited by 59
Dynamics of external wall structures with a PCM (phase change materials) in high latitude countries
Chwieduk, D. A. (2013) · Energy · doi:10.1016/j.energy.2013.06.066 · Cited by 57
Lee, K. O., Medina, M. A., & Sun, X. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.10.020 · Cited by 55
Li, C., Yu, H., & Song, Y. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.11.032 · Cited by 55
Experimental investigation of the daily thermal performance of a mPCM honeycomb wallboard
Wang, S.-M., Matiašovský, P., Mihálka, P., & Lai, C.-M. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.10.080 · Cited by 54
Bimaganbetova, M., Memon, S. A., & Sheriyev, A. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.10.046 · Cited by 52
Young, B. A., Falzone, G., Wei, Z., Sant, G., & Pilon, L. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.11.160 · Cited by 51
Ye, R., Zhang, C., Sun, W., Fang, X., & Zhang, Z. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.07.045 · Cited by 49
Kim, H. B., Masayuki, M. A. E., & Choi, Y. (2017) · Building and Environment · doi:10.1016/j.buildenv.2017.08.038 · Cited by 47
Buonomano, A., & Guarino, F. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109807 · Cited by 47
Arivazhagan, R., Geetha, N. B., Sivasamy, P., Palani, K., Gnanamithra, M. K., Sankar, S., Loganathan, G. B., & Arivarasan, A. (2019) · Materials Today Proceedings · doi:10.1016/j.matpr.2019.07.616 · Cited by 46
Barzin, R., Chen, J. J. J., Young, B. R., & Farid, M. M. (2021) · CRC Press eBooks · doi:10.1201/9780367567699-17 · Cited by 45
Behzadi, S., & Farid, M. M. (2011) · Science and Technology for the Built Environment · doi:10.1080/10789669.2011.573052 · Cited by 40
Characterization of panels containing micro-encapsulated Phase Change Materials
Marchi, S., Pagliolico, S. L., & Sassi, G. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.05.027 · Cited by 40
Errebai, F. B., Chikh, S., & Derradji, L. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.08.052 · Cited by 38
Numerical modeling of thermal behaviors of active multi-layer living wall
Mankibi, M. E., Zhai, Z. J., Al-Saadi, S. N., & Zoubir, A. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.06.084 · Cited by 36
Lee, J., Wi, S., Yun, B. Y., Yang, S., Park, J. H., & Kim, S. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.03.002 · Cited by 34
A simplified dynamic model of double layers shape-stabilized phase change materials wallboards
Zhu, N., Hu, P., & Xu, L. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.08.043 · Cited by 33
Lu, S., Liu, S., Huang, J., & Kong, X. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.07.082 · Cited by 33
Thermal analysis of phase change material board (PCMB) under weather conditions in the summer
Zhou, D., Tian, Y., Qu, Y., & Chen, Y. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.01.121 · Cited by 32
Numerical investigations of optimal phase change material incorporated into ventilated walls
Ling, H., Wang, L., Chen, C., & Chen, H. (2019) · Energy · doi:10.1016/j.energy.2019.01.066 · Cited by 30
Impact of the enthalpy function on the simulation of a building with phase change material wall
Kuznik, F., Johannes, K., Franquet, E., Zalewski, L., Gibout, S., Tittelein, P., Dumas, J. P., David, D., Bédécarrats, J.-P., & Lassue, S. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.05.046 · Cited by 29
Self-citationMarani, A., & Madhkhan, M. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.02.029 · Cited by 23
Venegas, T. P., Vasco, D. A., García, F. E., & Salinas, C. H. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.05.083 · Cited by 16
Cited by
Phase Change Thermal Storage Materials for Interdisciplinary Applications
Wang, G., Tang, Z., Gao, Y., Liu, P., Li, Y., Li, A., & Chen, X. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00572 · Cited by 550
Rahemipoor, S., Kuenzel, C., Valdemārs Eiduks, T., Shishkin, A., Izadifar, M., Ukrainczyk, N., Koenders, E., & Ranjbar, N. (2025) · Advanced Science · doi:10.1002/advs.202417350 · Cited by 10
Metadata
- Authors
- Lamrani, B., Johannes, K., & Kuznik, F.
- Venue
- Renewable and Sustainable Energy Reviews
- Publisher
- Elsevier BV
- Published
- 2021-04
- Volume
- 140
- Pages
- 110751
- ISSN
- 1364-0321 (ISSN-L)
- OpenAlex
- W3124473847
- Cited by
- 274
- References
- 129
- FWCI
- 19.22
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.