Carbon binder domain networks and electrical conductivity in lithium-ion battery electrodes: A critical review
Open accessThe DOI matches its Crossref record; 121 of the 121 references it cites were found in a registry or an index.
Abstract
In a drive to increase Li-ion battery energy density, as well as support faster charge discharge speeds, electronic conductivity networks require increasingly efficient transport pathways whilst using ever decreasing proportions of conductive additive. Comprehensive understanding of the complexities of electronic conduction in lithium-ion battery electrodes is lacking in the literature. In this work we show higher electronic conductivities do not necessarily lead to higher capacities at high C-rates due to the complex interrelation between the electronically conducting carbon binder domain (CBD) and the ionic diffusion within electrodes. A wide body of literature is reviewed, encompassing the current maxims of percolation theory and conductive additives as well as the relationships between processing steps at each stage of electrode manufacturing and formation of electronic conduction pathways. The state-of-the-art in electrode characterisation techniques are reviewed in the context of providing a holistic and accurate understanding of electronic conductivity. Literature regarding the simulation of electrode structures and their electronic properties is also reviewed. This review presents the first comprehensive survey of the formation of electronic conductivity networks throughout the CBD in battery electrodes, and demonstrates a lack of understanding regarding the most optimum arrangement of the CBD in the literature. This is further explored in relation to the long-range and short-range electrical contacts within a battery electrode which represent the micron level percolation network and the submicron connection of CBD to active material respectively. A guide to future investigations into CBD including specific characterisation experiments and simulation approaches is suggested. We conclude with suggestions on reporting important metrics such as robust electrical characterisation and the provision of metrics to allow comparison between studies such as aerial current density. Future advances in characterisation, simulation and experimentation will be able to provide a more complete understanding if research can be quantitatively compared.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thommes, M., Kaneko, K., Neimark, A. V., Olivier, J. P., Rodriguez-Reinoso, F., Rouquerol, J., & Sing, K. S. W. (2015) · Pure and Applied Chemistry · doi:10.1515/pac-2014-1117 · Cited by 21,202
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Surface energy and the contact of elastic solids
Johnson, K. L., Kendall, K., & Roberts, A. D. (1971) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1971.0141 · Cited by 8,061
Lithium Batteries: Status, Prospects and Future
Scrosati, B., & Garche, J. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.11.048 · Cited by 5,153
Effect of contact deformations on the adhesion of particles
Derjaguin, B. V., Muller, V. M., & Toporov, Y. P. (1975) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(75)90018-1 · Cited by 4,589
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328
Performance and cost of materials for lithium-based rechargeable automotive batteries
Schmuch, R., Wagner, R., Hörpel, G., Placke, T., & Winter, M. (2018) · Nature Energy · doi:10.1038/s41560-018-0107-2 · Cited by 3,233
Quantum Transport: Atom to Transistor
Datta, S. (2005) · Cambridge University Press eBooks · doi:10.1017/cbo9781139164313 · Cited by 3,227
Random Heterogeneous Materials: Microstructure and Macroscopic Properties
Haslach, H. (2002) · Applied Mechanics Reviews · doi:10.1115/1.1483342 · Cited by 1,873
Measurement of Sheet Resistivities with the Four-Point Probe
Smits, F. M. (1958) · Bell System Technical Journal · doi:10.1002/j.1538-7305.1958.tb03883.x · Cited by 1,664
A review of conduction phenomena in Li-ion batteries
Park, M., Zhang, X., Chung, M., Less, G. B., & Sastry, A. M. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.06.060 · Cited by 1,627
Current status and challenges for automotive battery production technologies
Kwade, A., Haselrieder, W., Leithoff, R., Modlinger, A., Dietrich, F., & Droeder, K. (2018) · Nature Energy · doi:10.1038/s41560-018-0130-3 · Cited by 1,133
Mathematical Proceedings of the Cambridge Philosophical Society
Duke, W. C. (2008) · Mathematical Proceedings of the Cambridge Philosophical Society · Cited by 977
Enhancing the performances of Li-ion batteries by carbon-coating: present and future
Li, H., & Zhou, H. (2012) · Chem. Commun. · doi:10.1039/c1cc14764a · Cited by 963
Three-dimensional reconstruction of a solid-oxide fuel-cell anode
Wilson, J. R., Kobsiriphat, W., Mendoza, R., Chen, H., Hiller, J. M., Miller, D. J., Thornton, K. S., Voorhees, P. W., Adler, S. B., & Barnett, S. A. (2006) · Nature Materials · doi:10.1038/nmat1668 · Cited by 906
Zhang, Y., Tang, Q., Zhang, Y., Wang, J., Stimming, U., & Lee, A. A. (2020) · Nature Communications · doi:10.1038/s41467-020-15235-7 · Cited by 889
Lithium-ion batteries – Current state of the art and anticipated developments
Armand, M., Axmann, P., Bresser, D., Copley, M., Edström, K., Ekberg, C., Guyomard, D., Lestriez, B., Novák, P., Petranikova, M., et al. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228708 · Cited by 888
Effective Medium Theory: Principles and Applications
Choy, T. C. (2015) · CERN Document Server (European Organization for Nuclear Research) · doi:10.1093/acprof:oso/9780198705093.001.0001 · Cited by 696
Optimizing Areal Capacities through Understanding the Limitations of Lithium-Ion Electrodes
Gallagher, K. G., Trask, S. E., Bauer, C., Woehrle, T., Lux, S. F., Tschech, M., Lamp, P., Polzin, B. J., Ha, S., Long, B., et al. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0321602jes · Cited by 646
A Novel Concept for the Synthesis of an Improved LiFePO[sub 4] Lithium Battery Cathode
Croce, F., D’ Epifanio, A., Hassoun, J., Deptula, A., Olczac, T., & Scrosati, B. (2002) · Electrochemical and Solid-State Letters · doi:10.1149/1.1449302 · Cited by 571
Miccoli, I., Edler, F., Pfnür, H., & Tegenkamp, C. (2015) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/27/22/223201 · Cited by 559
Lu, X., Bertei, A., Finegan, D. P., Tan, C., Daemi, S. R., Weaving, J. S., O’Regan, K. B., Heenan, T. M. M., Hinds, G., Kendrick, E., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-15811-x · Cited by 513
Ogihara, N., Itou, Y., Sasaki, T., & Takeuchi, Y. (2015) · The Journal of Physical Chemistry C · doi:10.1021/jp512564f · Cited by 463
Ogihara, N., Kawauchi, S., Okuda, C., Itou, Y., Takeuchi, Y., & Ukyo, Y. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.057207jes · Cited by 456
Lithium ion battery production
Väyrynen, A., & Salminen, J. (2012) · The Journal of Chemical Thermodynamics · doi:10.1016/j.jct.2011.09.005 · Cited by 440
The use of mathematical modeling in the design of lithium/polymer battery systems
Doyle, M., & Newman, J. (1995) · Electrochimica Acta · doi:10.1016/0013-4686(95)00162-8 · Cited by 433
Study on Polymer Binders for High-Capacity SiO Negative Electrode of Li-Ion Batteries
Komaba, S., Shimomura, K., Yabuuchi, N., Ozeki, T., Yui, H., & Konno, K. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp201691g · Cited by 405
Electrode manufacturing for lithium-ion batteries—Analysis of current and next generation processing
Hawley, W. B., & Li, J. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.100862 · Cited by 374
Lee, H. C., Liu, W.-W., Chai, S.-P., Mohamed, A. R., Aziz, A., Khe, C.-S., Hidayah, N. M. S., & Hashim, U. (2017) · RSC Advances · doi:10.1039/c7ra00392g · Cited by 357
Calendering effects on the physical and electrochemical properties of Li[Ni1/3Mn1/3Co1/3]O2 cathode
Zheng, H., Tan, L., Liu, G., Song, X., & Battaglia, V. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.02.001 · Cited by 344
Nature of Carbon Black Reinforcement of Rubber: Perspective on the Original Polymer Nanocomposite
Robertson, C. G., & Hardman, N. J. (2021) · Polymers · doi:10.3390/polym13040538 · Cited by 338
Electrolyte Design for Fast-Charging Li-Ion Batteries
Logan, E. R., & Dahn, J. R. (2020) · Trends in Chemistry · doi:10.1016/j.trechm.2020.01.011 · Cited by 334
Quantifying the factors limiting rate performance in battery electrodes
Tian, R., Park, S.-H., King, P. J., Cunningham, G., Coelho, J., Nicolosi, V., & Coleman, J. N. (2019) · Nature Communications · doi:10.1038/s41467-019-09792-9 · Cited by 326
Analysis of Lithium‐Ion Battery Models Based on Electrochemical Impedance Spectroscopy
Westerhoff, U., Kurbach, K., Lienesch, F., & Kurrat, M. (2016) · Energy Technology · doi:10.1002/ente.201600154 · Cited by 316
Kraytsberg, A., & Ein‐Eli, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600655 · Cited by 299
A Guide to Li-Ion Coin-Cell Electrode Making for Academic Researchers
Marks, T., Trussler, S., Smith, A. J., Xiong, D., & Dahn, J. R. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515072 · Cited by 290
Technical and economic analysis of solvent-based lithium-ion electrode drying with water and NMP
Wood, D. L., Quass, J. D., Li, J., Ahmed, S., Ventola, D., & Daniel, C. (2018) · Drying Technology · doi:10.1080/07373937.2017.1319855 · Cited by 286
Nickol, A., Schied, T., Heubner, C., Schneider, M., Michaelis, A., Bobeth, M., & Cuniberti, G. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab9404 · Cited by 281
Tortuosity in electrochemical devices: a review of calculation approaches
Tjaden, B., Brett, D. J. L., & Shearing, P. R. (2018) · International Materials Reviews · doi:10.1080/09506608.2016.1249995 · Cited by 278
Characterization of the calendering process for compaction of electrodes for lithium-ion batteries
Meyer, C., Bockholt, H., Haselrieder, W., & Kwade, A. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.05.031 · Cited by 275
X-Ray Tomography for Lithium Ion Battery Research: A Practical Guide
Pietsch, P., & Wood, V. (2017) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070616-123957 · Cited by 255
Ngandjong, A. C., Lombardo, T., Primo, E. N., Chouchane, M., Shodiev, A., Arcelus, O., & Franco, A. A. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.229320 · Cited by 249
Mohanty, D., Hockaday, E., Li, J., Hensley, D. K., Daniel, C., & Wood, D. L. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.02.007 · Cited by 226
Liu, G., Zheng, H., Simens, A. S., Minor, A. M., Song, X., & Battaglia, V. S. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2792293 · Cited by 219
Could graphene construct an effective conducting network in a high-power lithium ion battery?
Su, F., He, Y., Li, B., Chen, X., You, C., Wei, W., Lv, W. Z., Yang, Q., & Kang, F. (2012) · Nano Energy · doi:10.1016/j.nanoen.2012.02.004 · Cited by 218
Measurement of three-dimensional microstructure in a LiCoO2 positive electrode
Wilson, J. R., Cronin, J. S., Barnett, S. A., & Harris, S. J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.04.066 · Cited by 207
Bauer, W., Nötzel, D., Wenzel, V., & Nirschl, H. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.04.081 · Cited by 204
Review—Conducting Polymer-Based Binders for Lithium-Ion Batteries and Beyond
Nguyen, V. A., & Kuss, C. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab856b · Cited by 201
Blais, B., Lassaigne, M., Goniva, C., Fradette, L., & Bertrand, F. (2016) · Journal of Computational Physics · doi:10.1016/j.jcp.2016.05.008 · Cited by 199
Electrode scale and electrolyte transport effects on extreme fast charging of lithium-ion cells
Colclasure, A. M., Tanim, T. R., Jansen, A. N., Trask, S. E., Dunlop, A. R., Polzin, B. J., Bloom, I., Robertson, D., Flores, L., Evans, M., et al. (2020) · Electrochimica Acta · doi:10.1016/j.electacta.2020.135854 · Cited by 185
Carbon nanotubes in Li-ion batteries: A review
Sehrawat, P., Julien, C., & Islam, S. S. (2016) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2016.06.013 · Cited by 184
Energy impact of cathode drying and solvent recovery during lithium-ion battery manufacturing
Ahmed, S., Nelson, P. A., Gallagher, K. G., & Dees, D. W. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.102 · Cited by 184
Orikasa, Y., Gogyo, Y., Yamashige, H., Katayama, M., Chen, K., Mori, T., Yamamoto, K., Masese, T., Inada, Y., Ohta, T., et al. (2016) · Scientific Reports · doi:10.1038/srep26382 · Cited by 178
Bockholt, H., Haselrieder, W., & Kwade, A. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.04.011 · Cited by 177
Hein, S., Danner, T., Westhoff, D., Prifling, B., Scurtu, R., Kremer, L., Hoffmann, A., Hilger, A., Osenberg, M., Manke, I., et al. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab6b1d · Cited by 175
Keefe, A. S., Buteau, S., Hill, I. G., & Dahn, J. R. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0541914jes · Cited by 170
High Rate Capability of Li(Ni1/3Mn1/3Co1/3)O2Electrode for Li-Ion Batteries
Wu, S.-L., Zhang, W., Song, X., Shukla, A. K., Liu, G., Battaglia, V., & Srinivasan, V. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.062204jes · Cited by 170
Liu, H., Cheng, X., Chong, Y., Yuan, H., Huang, J.-Q., & Zhang, Q. (2021) · Particuology · doi:10.1016/j.partic.2020.12.003 · Cited by 166
Secondary-Phase Stochastics in Lithium-Ion Battery Electrodes
Mistry, A. N., Smith, K. A., & Mukherjee, P. P. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b17771 · Cited by 165
Zielke, L., Hutzenlaub, T., Wheeler, D. R., Chao, C., Manke, I., Hilger, A., Paust, N., Zengerle, R., & Thiele, S. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201401612 · Cited by 165
Recent advances and open challenges in percolation
Araújo, N. A. M., Grassberger, P., Kahng, B., Schrenk, K. J., & Ziff, R. M. (2014) · The European Physical Journal Special Topics · doi:10.1140/epjst/e2014-02266-y · Cited by 163
Mixing characteristics of wet granular matter in a bladed mixer
Radl, S., Kalvoda, E., Glasser, B. J., & Khinast, J. (2010) · Powder Technology · doi:10.1016/j.powtec.2010.02.022 · Cited by 163
Müller, S., Sauter, C., Shunmugasundaram, R., Wenzler, N., Andrade, V. D., Carlo, F. D., Konukoğlu, E., & Wood, V. C. (2021) · Nature Communications · doi:10.1038/s41467-021-26480-9 · Cited by 157
Three-dimensional reconstruction of a composite cathode for lithium-ion cells
Ender, M., Joos, J., Carraro, T., & Ivers‐Tiffée, E. (2010) · Electrochemistry Communications · doi:10.1016/j.elecom.2010.12.004 · Cited by 155
Manufacturing Process for Improved Ultra‐Thick Cathodes in High‐Energy Lithium‐Ion Batteries
Kremer, L. S., Hoffmann, A., Danner, T., Hein, S., Prifling, B., Westhoff, D., Dreer, C., Latz, A., Schmidt, V., & Wohlfahrt‐Mehrens, M. (2019) · Energy Technology · doi:10.1002/ente.201900167 · Cited by 152
Effect of Calendering on Electrode Wettability in Lithium-Ion Batteries
Sheng, Y., Fell, C. R., Son, Y. K., Metz, B. M., Jiang, J., & Church, B. C. (2014) · Frontiers in Energy Research · doi:10.3389/fenrg.2014.00056 · Cited by 148
Trembacki, B. L., Mistry, A. N., Noble, D. R., Ferraro, M. E., Mukherjee, P. P., & Roberts, S. A. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0981813jes · Cited by 146
Determination of branch fraction and minimum dimension of mass-fractal aggregates
Beaucage, G. (2004) · Physical Review E · doi:10.1103/physreve.70.031401 · Cited by 142
Influence of Convective Drying Parameters on Electrode Performance and Physical Electrode Properties
Westphal, B., Bockholt, H., Günther, T., Haselrieder, W., & Kwade, A. (2015) · ECS Transactions · doi:10.1149/06422.0057ecst · Cited by 142
Shearing, P. R., Brandon, N. P., Gelb, J., Bradley, R. S., Withers, P. J., Marquis, A. J., Cooper, S. J., & Harris, S. J. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.053207jes · Cited by 138
Günther, T., Schreiner, D., Metkar, A., Meyer, C., Kwade, A., & Reinhart, G. (2019) · Energy Technology · doi:10.1002/ente.201900026 · Cited by 138
Forouzan, M. M., Chao, C., Bustamante, D., Mazzeo, B. A., & Wheeler, D. R. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.02.014 · Cited by 130
Chouchane, M., Rucci, A., Lombardo, T., Ngandjong, A. C., & Franco, A. A. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.227285 · Cited by 128
High-density positive electrodes containing carbon nanotubes for use in Li-ion cells
Sheem, K. Y., Lee, Y. H., & Lim, H. S. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.10.077 · Cited by 126
Westphal, B., Mainusch, N., Meyer, C., Haselrieder, W., Indrikova, M., Titscher, P., Bockholt, H., Viöl, W., & Kwade, A. (2017) · Journal of Energy Storage · doi:10.1016/j.est.2017.02.001 · Cited by 122
Visualizing the Carbon Binder Phase of Battery Electrodes in Three Dimensions
Daemi, S. R., Tan, C., Volkenandt, T., Cooper, S. J., Palacios-Padros, A., Cookson, J., Brett, D. J. L., & Shearing, P. R. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b00501 · Cited by 122
Discrete modelling of the electrochemical performance of SOFC electrodes
Schneider, L. C. R., Martin, C. L., Bultel, Y., Bouvard, D., & Siebert, E. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2006.05.018 · Cited by 118
Structural and mechanical characterization of lithium-ion battery electrodes via DEM simulations
Giménez, C. S., Finke, B., Nowak, C., Schilde, C., & Kwade, A. (2018) · Advanced Powder Technology · doi:10.1016/j.apt.2018.05.014 · Cited by 110
Choice for graphene as conductive additive for cathode of lithium-ion batteries
Shi, Y., Wen, L., Pei, S., Wu, M., & Li, F. (2018) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2018.03.009 · Cited by 107
FIB/SEM-based calculation of tortuosity in a porous LiCoO2 cathode for a Li-ion battery
Hutzenlaub, T., Asthana, A., Becker, J., Wheeler, D. R., Zengerle, R., & Thiele, S. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2012.11.006 · Cited by 105
Mayer, J. K., Almar, L., Asylbekov, E., Haselrieder, W., Kwade, A., Weber, A., & Nirschl, H. (2019) · Energy Technology · doi:10.1002/ente.201900161 · Cited by 104
Bockholt, H., Haselrieder, W., & Kwade, A. (2013) · ECS Transactions · doi:10.1149/05026.0025ecst · Cited by 95
Boz, B., Dev, T., Salvadori, A., & Schaefer, J. L. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac1cc3 · Cited by 95
Gaikwad, A. M., & Arias, A. C. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b14719 · Cited by 94
Bruggeman's Exponents for Effective Thermal Conductivity of Lithium-Ion Battery Electrodes
Vadakkepatt, A., Trembacki, B. L., Mathur, S. R., & Murthy, J. Y. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0151602jes · Cited by 90
Tariq, F., Yufit, V., Kishimoto, M., Shearing, P. R., Menkin, S., Golodnitsky, D., Gelb, J., Peled, E., & Brandon, N. P. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.147 · Cited by 87
Xu, S., Rezvanian, O., Peters, K. J., & Zikry, M. A. (2013) · Nanotechnology · doi:10.1088/0957-4484/24/15/155706 · Cited by 84
Controlling Binder Adhesion to Impact Electrode Mesostructures and Transport
Srivastava, I., Bolintineanu, D., Lechman, J. B., & Roberts, S. A. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c08251 · Cited by 84
Lee, J., Kim, J.-S., Kim, Y., Zang, D. S., & Paik, U. (2008) · Ultramicroscopy · doi:10.1016/j.ultramic.2008.04.027 · Cited by 83
Ahn, S., Kim, Y., Kim, K. J., et al. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00133-0 · Cited by 77
Structural and Electrochemical Properties of Calendered Lithium Manganese Oxide Cathodes
Schilcher, C., Meyer, C., & Kwade, A. (2016) · Energy Technology · doi:10.1002/ente.201600130 · Cited by 77
Giménez, C. S., Schilde, C., Froböse, L., Ivanov, S., & Kwade, A. (2019) · Energy Technology · doi:10.1002/ente.201900180 · Cited by 76
Causes of binder damage in porous battery electrodes and strategies to prevent it
Foster, J. M., Huang, X., Jiang, M., Chapman, S. J., Protas, B., & Richardson, G. W. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.03.035 · Cited by 74
DandeLiion v1: An Extremely Fast Solver for the Newman Model of Lithium-Ion Battery (Dis)charge
Korotkin, I., Sahu, S., O’Kane, S. E. J., Richardson, G. W., & Foster, J. M. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac085f · Cited by 70
Three-dimensional conductive network formed by carbon nanotubes in aqueous processed NMC electrode
Du, Z., Li, J., Wood, M., Mao, C., Daniel, C., & Wood, D. L. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.03.063 · Cited by 67
Laser‐preparation of geometrically optimised samples for X‐ray nano‐CT
Bailey, J. J., Heenan, T. M. M., Finegan, D. P., Lu, X., Daemi, S. R., Iacoviello, F., Backeberg, N. R., Taiwo, O. O., Brett, D. J. L., Atkinson, A., et al. (2017) · Journal of Microscopy · doi:10.1111/jmi.12577 · Cited by 66
Short-range contacts govern the performance of industry-relevant battery cathodes
Morelly, S. L., Alvarez, N. J., & Tang, M. H.-M. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.03.039 · Cited by 63
Demystifying Charge Transport Limitations in the Porous Electrodes of Lithium‐Ion Batteries
Hamed, H., Yari, S., D’Haen, J., Renner, F. U., Reddy, N. K., Hardy, A. T., & Safari, M. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002492 · Cited by 62
Direct Measurements of Effective Electronic Transport in Porous Li-Ion Electrodes
Peterson, S. W., & Wheeler, D. R. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0661414jes · Cited by 61
Impact of an Emergent Hierarchical Filler Network on Nanocomposite Dynamics
Rishi, K., Beaucage, G., Kuppa, V., Mulderig, A., Narayanan, V., McGlasson, A., Rackaitis, M., & Ilavský, J. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b01510 · Cited by 58
Mistry, A. N., Trask, S. E., Dunlop, A. R., Jeka, G. T., Polzin, B. J., Mukherjee, P. P., & Srinivasan, V. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac1033 · Cited by 54
Reuter, F., Baasner, A., von Nidda, J. K., Piwko, M., Dörfler, S., Althues, H., & Kaskel, S. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0431914jes · Cited by 54
Dispersion kinetics of carbon black for the application in lithium-ion batteries
Grießl, D., Huber, K., Scherbauer, R., & Kwade, A. (2021) · Advanced Powder Technology · doi:10.1016/j.apt.2021.05.003 · Cited by 53
Ogihara, N., Itou, Y., & Kawauchi, S. (2019) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.9b01670 · Cited by 49
Kroll, M., Karstens, S. L., Cronau, M., Höltzel, A., Schlabach, S., Nobel, N., Redenbach, C., Roling, B., & Tallarek, U. (2021) · Batteries & Supercaps · doi:10.1002/batt.202100057 · Cited by 48
Method Development for Quality Control of Suspensions for Lithium-Ion Battery Electrodes
Dreger, H., Huelsebrock, M., Froböse, L., & Kwade, A. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b02103 · Cited by 48
Effects of Dispersant on the Conductive Carbon for LiFePO4 Cathode
Chang, C., Her, L., Su, H., Hsu, S.-H., & Yen, Y. T. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3560222 · Cited by 48
Kondo, H., Sawada, H., Okuda, C., & Sasaki, T. G. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0051906jes · Cited by 45
Ghosh, S., Ohashi, H., Tabata, H., Hashimasa, Y., & Yamaguchi, T. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.09.080 · Cited by 42
A Review: Carbon Additives in LiMnPO4- and LiCoO2-Based Cathode Composites for Lithium Ion Batteries
Kwon, N. H., Mouck-Makanda, D., & Fromm, K. M. (2018) · Batteries · doi:10.3390/batteries4040050 · Cited by 40
Electron microscopy and its role in advanced lithium-ion battery research
Wu, J., Fenech, M. F., Webster, R. F., Tilley, R. D., & Sharma, N. (2019) · Sustainable Energy & Fuels · doi:10.1039/c9se00038k · Cited by 38
Multiscale simulation process and application to additives in porous composite battery electrodes
Wieser, C., Prill, T., & Schladitz, K. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.090 · Cited by 35
Oehler, D., Seegert, P., & Wetzel, T. (2020) · Energy Technology · doi:10.1002/ente.202000574 · Cited by 33
WITHDRAWNPreprint
(2020) · ECSarXiv (OSF Preprints) · doi:10.1149/osf.io/5npy8 · Cited by 30
Morelly, S. L., Gelb, J., Iacoviello, F., Shearing, P. R., Harris, S. J., Alvarez, N. J., & Tang, M. H.-M. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b01184 · Cited by 29
Influence of Binder on Impedance of Lithium Batteries: A Mini-review
Liu, M., Ye, C., Peng, L., & Weng, J. (2021) · Journal of Electrical Engineering and Technology · doi:10.1007/s42835-021-00936-w · Cited by 28
Martínez, R. F., Iturrondobeitia, M., Ibarretxe, J., & Guraya, T. (2016) · Journal of Materials Science · doi:10.1007/s10853-016-0354-1 · Cited by 28
Study on Different Water-Based Binders for Li4Ti5O12 Electrodes
Toigo, C., Arbizzani, C., Pettinger, K., & Biso, M. (2020) · Molecules · doi:10.3390/molecules25102443 · Cited by 25
Cadiou, F., Douillard, T., Willot, F., Badot, J.-C., Lestriez, B., & Maire, É. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abbf68 · Cited by 24
Imaging the strain induced carbon black filler network structure breakage with nano X-ray tomography
Zhou, W., Chen, L., Lü, J., Qi, Z., Huang, N., Li, L., & Huang, W. (2014) · RSC Advances · doi:10.1039/c4ra09095k · Cited by 20
Ludwig, B., Liu, J., Liu, Y., Zheng, Z., Wang, Y., & Pan, H. (2017) · Journal of Micro and Nano-Manufacturing · doi:10.1115/1.4037769 · Cited by 18
Metadata
- Authors
- Entwistle, J., Ge, R., Pardikar, K., Smith, R., & Cumming, D.
- Venue
- Renewable and Sustainable Energy Reviews
- Publisher
- Elsevier BV
- Published
- 2022-09
- Volume
- 166
- Pages
- 112624
- ISSN
- 1364-0321 (ISSN-L)
- OpenAlex
- W4281737294
- Cited by
- 221
- References
- 121
- FWCI
- 10.24
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.