The DOI matches its Crossref record.
Close loop separation process for the recovery of Co, Cu, Mn, Fe and Li from spent lithium-ion batteries
Abstract
Abstract Lithium-ion batteries (LIBs) are essential energy source used in advanced electronic gadgets for getting constant and continuous power supply. Huge amount of spent LIBs are generated after their end use. LIBs contain metals, organics and plastics which require proper treatment before disposal. Keeping in view of stringent environmental regulations, limited natural resources and energy crisis, adopting recycling will not only protect the environment and pacify the gap between demand and supply but also conserve the natural resources. Present paper reports a complete process for the recycling of LIBs to recover metals and materials as value added products fulfilling zero waste concept. Initially, the spent LIBs were crushed and beneficiated by wet scrubbing process to separate cathodic material, plastic and metallic fractions. The cathodic material contained 20% Co and 2.4% Li along with other impurities (Mn, Fe, Cu). The cathodic material obtained from different LIBs were homogenized and put to leaching studies to optimize various process parameters viz. effect of leachant concentration, temperature, time, etc. About 97% Co and 99.99% Li were leached using 2 M H2SO4 and 10% H2O2 at room temperature, in 2 h maintaining pulp density 75 g/L. Kinetics for leaching of Co fitted well with “Chemical reaction control dense constant size cylindrical particles model”, i.e. 1 − (1 − X)1/2 = Kct. The leach liquor obtained was further processed to recover Mn and Fe using (NH4)2S2O8 as a precipitant whereas 99.99% Cu was extracted using LIX 84 IC at eq. pH 2, O/A ratio 1/1 and mixing time 5 min. Further, from the leach liquor depleted with Mn, Fe and Cu, ∼98% Co was extracted using 20% Cyanex 272 at pH 4.8 in 10 min maintaining phase ratio (O/A) 1/1 in two stages, leaving Li in the raffinate. From the pure Co solution, value added products as metal and salt were produced using electrowinning/evaporation/precipitation techniques. The TCLP test of leached residue shows the presence of metals within permissible limit and the effluent generated was treated in an effluent treatment plant (ETP) with standard procedure and recycled to the system. The developed clean process is economical as well as environment friendly and has potential to be translated in industry after scale-up studies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Sustainable Recycling Technology for Li-Ion Batteries and Beyond: Challenges and Future Prospects
Fan, E., Li, L., Wang, Z., Lin, J., Huang, Y., Yao, Y., Chen, R., & Wu, F. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00535 · Cited by 2,020
Toward sustainable and systematic recycling of spent rechargeable batteries
Zhang, X., Li, L., Fan, E., Xue, Q., Bian, Y., Wu, F., & Chen, R. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00297e · Cited by 1,038
Lithium-ion batteries – Current state of the art and anticipated developments
Armand, M., Axmann, P., Bresser, D., Copley, M., Edström, K., Ekberg, C., Guyomard, D., Lestriez, B., Novák, P., Petranikova, M., et al. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228708 · Cited by 888
Roy, J. J., Rarotra, S., Krikstolaityte, V., Zhuoran, K. W., Cindy, Y. D., Tan, X. Y., Carboni, M., Meyer, D., Yan, Q., & Srinivasan, M. (2022) · Advanced Materials · doi:10.1002/adma.202103346 · Cited by 575
The importance of design in lithium ion battery recycling – a critical review
Thompson, D. L., Hartley, J. M., Lambert, S. M., Shiref, M., Harper, G. D. J., Kendrick, E., Anderson, P., Ryder, K. S., Gaines, L., & Abbott, A. P. (2020) · Green Chemistry · doi:10.1039/d0gc02745f · Cited by 443
Recycling of spent lithium-ion batteries for a sustainable future: recent advancements
Biswal, B. K., Zhang, B., Thi Minh Tran, P., Zhang, J., & Balasubramanian, R. (2024) · Chemical Society Reviews · doi:10.1039/d3cs00898c · Cited by 436
Progress and Status of Hydrometallurgical and Direct Recycling of Li-Ion Batteries and Beyond
Larouche, F., Tedjar, F., Amouzegar, K., Houlachi, G., Bouchard, P., Demopoulos, G. P., & Zaghib, K. (2020) · Materials · doi:10.3390/ma13030801 · Cited by 417
Regeneration and reutilization of cathode materials from spent lithium-ion batteries
Zhao, Y., Yuan, X., Jiang, L., Wen, J., Wang, H., Guan, R., Zhang, J., & Zeng, G. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123089 · Cited by 408
Mao, J., Ye, C., Zhang, S., Xie, F., Zeng, R., Davey, K., Guo, Z., & Qiao, S. (2022) · Energy & Environmental Science · doi:10.1039/d2ee00162d · Cited by 365
Peng, C., Liu, F., Wang, Z., Wilson, B. P., & Lundström, M. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.01.072 · Cited by 339
Solvent extraction for recycling of spent lithium-ion batteries
Lei, S., Sun, W., & Yang, Y. (2022) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.127654 · Cited by 306
Liang, Z., Cai, C., Peng, G., Hu, J., Hou, H., Liu, B., Liang, S., Xiao, K., Yuan, S., & Yang, J. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c00942 · Cited by 302
Burgeoning Prospects of Spent Lithium‐Ion Batteries in Multifarious Applications
Natarajan, S., & Aravindan, V. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802303 · Cited by 287
Windisch-Kern, S., Gerold, E., Nigl, T., Jandric, A., Altendorfer, M., Rutrecht, B., Scherhaufer, S., Raupenstrauch, H., Pomberger, R., Antrekowitsch, H., et al. (2022) · Waste Management · doi:10.1016/j.wasman.2021.11.038 · Cited by 284
Asadi Dalini, E., Karimi, G., Zandevakili, S., & Goodarzi, M. (2021) · Mineral Processing and Extractive Metallurgy Review · doi:10.1080/08827508.2020.1781628 · Cited by 276
Metadata
- Authors
- Dutta, D., Kumari, A., Panda, R., Jha, S., Gupta, D., Goel, S., & Jha, M. K.
- Venue
- Separation and Purification Technology
- Publisher
- Elsevier BV
- Published
- 2018-07
- Volume
- 200
- Pages
- 327-334
- ISSN
- 1383-5866 (ISSN-L)
- OpenAlex
- W2789803571
- Cited by
- 182
- References
- 0
- FWCI
- 12.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.