The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Flexible resistive NO2 gas sensor of three-dimensional crumpled MXene Ti3C2Tx/ZnO spheres for room temperature application
Abstract
Abstract MXene is a potential candidate of the sensing electrode for flexible gas sensing devices and has attracted considerable attention. However, two-dimensional (2D) MXene Ti3C2Tx nanosheet is liable to stack together and lose the high specific surface area, which limits its gas sensing performance. In this work, a room-temperature flexible NO2 sensor based on three-dimensional (3D) crumpled MXene sphere prepared by ultrasonic spray pyrolysis technology is developed. Then, the properties are further improved by designing 3D crumpled MXene sphere/ZnO composites sensitive electrode with high specific surface area and active sites. The selectivity of the flexible sensing device to NO2 is further highlighted, and the response signal to 100 ppm NO2 improves from 27.27 %–41.93 %, and the recovery characteristic substantially increases from ∼30 % to ∼100 %. The excellent NO2 sensing properties of 3D crumpled MXene sphere/ZnO are attributed to the high surface area, abundance of edges and defects caused by folding, and the formation of MXene/ZnO p–n heterojunction. This work has introduced an idea to improve MXene gas-sensing properties and helped us to further understand the sensing process between MXene and target gas.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
25th Anniversary Article: MXenes: A New Family of Two‐Dimensional Materials
Naguib, M., Mochalin, V. N., Barsoum, M. W., & Gogotsi, Y. (2014) · Advanced Materials · doi:10.1002/adma.201304138 · Cited by 6,414
Guidelines for Synthesis and Processing of Two-Dimensional Titanium Carbide (Ti3C2Tx MXene)
Alhabeb, M., Maleski, K., Anasori, B., Lelyukh, P., Clark, L., Sin, S., & Gogotsi, Y. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02847 · Cited by 5,045
Lipatov, A., Alhabeb, M., Lukatskaya, M. R., Boson, A., Gogotsi, Y., & Sinitskii, A. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201600255 · Cited by 1,751
Metallic Ti3C2T x MXene Gas Sensors with Ultrahigh Signal-to-Noise Ratio
Kim, S. J., Koh, H.-J., Ren, C. E., Kwon, O., Maleski, K., Cho, S.-Y., Anasori, B., Kim, C.-K., Choi, Y.-K., Kim, J., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b07460 · Cited by 1,699
Hollow MXene Spheres and 3D Macroporous MXene Frameworks for Na‐Ion Storage
Zhao, M., Xie, X., Ren, C. E., Makaryan, T., Anasori, B., Wang, G., & Gogotsi, Y. (2017) · Advanced Materials · doi:10.1002/adma.201702410 · Cited by 1,065
Charge- and Size-Selective Ion Sieving Through Ti3C2Tx MXene Membranes
Ren, C. E., Hatzell, K. B., Alhabeb, M., Ling, Z., Mahmoud, K. A., & Gogotsi, Y. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01895 · Cited by 1,030
Zinc Oxide Nanostructures for NO2 Gas–Sensor Applications: A Review
Kumar, R., Al-Dossary, O., Kumar, G., & Umar, A. (2015) · Nano-Micro Letters · doi:10.1007/s40820-014-0023-3 · Cited by 900
Zhao, S., Zhang, H.-B., Luo, J.-Q., Wang, Q.-W., Xu, B., Hong, S., & Yu, Z.-Z. (2018) · ACS Nano · doi:10.1021/acsnano.8b05739 · Cited by 893
Li, J., Yuan, X., Lin, C., Yang, Y., Xu, L., Du, X., Xie, J., Lin, J., & Sun, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602725 · Cited by 798
Ultrahigh sensitivity and layer-dependent sensing performance of phosphorene-based gas sensors
Cui, S., Pu, H., Wells, S. A., Wen, Z., Mao, S., Chang, J., Hersam, M. C., & Chen, J. (2015) · Nature Communications · doi:10.1038/ncomms9632 · Cited by 763
Ion-Exchange and Cation Solvation Reactions in Ti3C2 MXene
Ghidiu, M., Halim, J., Kota, S., Bish, D., Gogotsi, Y., & Barsoum, M. W. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b01275 · Cited by 733
Anasori, B., Shi, C., Moon, E. J., Xie, Y., Voigt, C. A., Kent, P. R. C., May, S. J., Billinge, S. J. L., Barsoum, M. W., & Gogotsi, Y. (2016) · Nanoscale Horizons · doi:10.1039/c5nh00125k · Cited by 637
Xiu, L., Wang, Z., Yu, M., Wu, X., & Qiu, J. (2018) · ACS Nano · doi:10.1021/acsnano.8b02849 · Cited by 588
Compression and Aggregation-Resistant Particles of Crumpled Soft Sheets
Luo, J., Jang, H. D., Sun, T., Xiao, L., He, Z., Katsoulidis, A. P., Kanatzidis, M. G., Gibson, J. M., & Huang, J. (2011) · ACS Nano · doi:10.1021/nn203115u · Cited by 532
Tang, X., Guo, X., Wu, W., & Wang, G. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801897 · Cited by 494
High‐Performance NO2 Sensors Based on Chemically Modified Graphene
Yuan, W., Liu, A., Huang, L., Li, C., & Shi, G. (2013) · Advanced Materials · doi:10.1002/adma.201203172 · Cited by 453
Self-citationHigh‐performance flexible sensing devices based on polyaniline/MXene nanocomposites
Zhao, L., Wang, K., Wei, W., Wang, L., & Han, W. (2019) · InfoMat · doi:10.1002/inf2.12032 · Cited by 420
A flexible VOCs sensor based on a 3D Mxene framework with a high sensing performance
Yuan, W., Yang, K., Peng, H., Li, F., & Yin, F. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta06928j · Cited by 400
Improvement of Gas and Humidity Sensing Properties of Organ-like MXene by Alkaline Treatment
Yang, Z., Liu, A., Wang, C., Liu, F., He, J., Li, S., Wang, J., You, R., Yan, X., Sun, P., et al. (2019) · ACS Sensors · doi:10.1021/acssensors.9b00127 · Cited by 375
Self-citationCones, Pringles, and Grain Boundary Landscapes in Graphene Topology
Liu, Y., & Yakobson, B. I. (2010) · Nano Letters · doi:10.1021/nl100988r · Cited by 343
Enhanced ammonia response of Ti3C2T nanosheets supported by TiO2 nanoparticles at room temperature
Tai, H., Duan, Z., He, Z., Li, X., Xu, J., Liu, B., & Jiang, Y. (2019) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2019.126874 · Cited by 325
Lu, G., Ocola, L. E., & Chen, J. (2009) · Advanced Materials · doi:10.1002/adma.200803536 · Cited by 306
Self-citationKoh, H.-J., Kim, S. J., Maleski, K., Cho, S.-Y., Kim, Y.-J., Ahn, C. W., Gogotsi, Y., & Jung, H.-T. (2019) · ACS Sensors · doi:10.1021/acssensors.9b00310 · Cited by 257
Role of oxygen functional groups in graphene oxide for reversible room-temperature NO2 sensing
Choi, Y. R., Yoon, Y.-G., Choi, K. S., Kang, J. H., Shim, Y.-S., Kim, Y. H., Chang, H. J., Lee, J.-H., Park, C. R., Kim, S. Y., et al. (2015) · Carbon · doi:10.1016/j.carbon.2015.04.082 · Cited by 233
Polycrystalline Graphene Ribbons as Chemiresistors
Salehi‐Khojin, A., Estrada, D., Lin, K. Y., Bae, M., Xiong, F., Pop, E., & Masel, R. I. (2012) · Advanced Materials · doi:10.1002/adma.201102663 · Cited by 203
Facile Synthesis of 3D Graphene Flowers for Ultrasensitive and Highly Reversible Gas Sensing
Wu, J., Feng, S., Wei, X., Shen, J., Lu, W., Shi, H., Tao, K., Lu, S., Sun, T., Yu, L., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201603598 · Cited by 170
Natu, V., Clites, M., Pomerantseva, E., & Barsoum, M. W. (2018) · Materials Research Letters · doi:10.1080/21663831.2018.1434249 · Cited by 163
Liu, J., Li, S., Zhang, B., Xiao, Y., Gao, Y. L., Yang, Q., Wang, Y., & Lu, G. (2017) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2017.04.190 · Cited by 139
Self-citationChemically functionalized 3D graphene hydrogel for high performance gas sensing
Wu, J., Tao, K., Zhang, J., Guo, Y., Miao, J., & Norford, L. K. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta01426g · Cited by 117
Travlou, N. A., Ushay, C., Seredych, M., Rodríguez-Castellón, E., & Bandosz, T. J. (2016) · ACS Sensors · doi:10.1021/acssensors.6b00093 · Cited by 66
2D Metal Chalcogenide Nanopatterns by Block Copolymer Lithography
Yun, T., Jin, H. M., Kim, D., Han, K. H., Yang, G. G., Lee, G. Y., Lee, G. S., Choi, J., Kim, I., & Kim, S. O. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201804508 · Cited by 62
Insight into ammonia sensing on heterogeneous S- and N- co-doped nanoporous carbons
Travlou, N. A., Seredych, M., Rodrı́guez-Castellón, E., & Bandosz, T. J. (2015) · Carbon · doi:10.1016/j.carbon.2015.10.049 · Cited by 47
Cited by
Ti3C2TX MXene for Sensing Applications: Recent Progress, Design Principles, and Future Perspectives
Pei, Y., Zhang, X., Hui, Z., Zhou, J., Huang, X., Sun, G., & Huang, W. (2021) · ACS Nano · doi:10.1021/acsnano.1c00248 · Cited by 799
Metal oxide gas sensors for detecting NO2 in industrial exhaust gas: Recent developments
Li, Q., Zeng, W., & Li, Y. (2022) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2022.131579 · Cited by 422
Wang, D., Zhang, D., Guo, J., Hu, Y., Yang, Y., Sun, T., Zhang, H., & Liu, X. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.106410 · Cited by 359
Zhou, T., & Zhang, T. (2021) · Small Methods · doi:10.1002/smtd.202100515 · Cited by 350
Metal-Oxide Nanomaterials Synthesis and Applications in Flexible and Wearable Sensors
Yoon, Y., Truong, P. L., Lee, D., & Ko, S. H. (2022) · ACS Nanoscience Au · doi:10.1021/acsnanoscienceau.1c00029 · Cited by 313
Metadata
- Authors
- Yang, Z., Jiang, L., Wang, J., Liu, F., He, J., Liu, A., Lv, S., You, R., Yan, X., Sun, P., Wang, C., Duan, Y., & Lu, G.
- Venue
- Sensors and Actuators B: Chemical
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 326
- Pages
- 128828
- ISSN
- 0925-4005 (ISSN-L)
- OpenAlex
- W3082420041
- Cited by
- 357
- References
- 33
- FWCI
- 15.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.