Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
The DOI matches its Crossref record; 148 of the 162 references it cites were found in a registry or an index.
Abstract
Nearing 30 years since its introduction, 3D printing technology is set to revolutionize research and teaching laboratories. This feature encompasses the history of 3D printing, reviews various printing methods, and presents current applications. The authors offer an appraisal of the future direction and impact this technology will have on laboratory settings as 3D printers become more accessible.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Porous scaffold design for tissue engineering
Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,969
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Inkjet Printing of Polymers: State of the Art and Future Developments
de Gans, B. ‐., Duineveld, P. C., & Schubert, U. S. (2004) · Advanced Materials · doi:10.1002/adma.200300385 · Cited by 1,906
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Inkjet Printing for Materials and Devices
Calvert, P. (2001) · Chemistry of Materials · doi:10.1021/cm0101632 · Cited by 1,822
3D printing based on imaging data: review of medical applications
Rengier, F., Mehndiratta, A., von Tengg-Kobligk, H., Zechmann, C. M., Unterhinninghofen, R., Kauczor, H.-U., & Giesel, F. L. (2010) · International Journal of Computer Assisted Radiology and Surgery · doi:10.1007/s11548-010-0476-x · Cited by 1,584
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., & Das, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.11.057 · Cited by 1,563
Patterning proteins and cells using soft lithography
Kane, R. (1999) · Biomaterials · doi:10.1016/s0142-9612(99)00165-9 · Cited by 1,490
Engineering cell shape and function
Singhvi, R., Kumar, A., Lopez, G. P., Stephanopoulos, G. N., Wang, D. I. C., Whitesides, G. M., & Ingber, D. E. (1994) · Science · doi:10.1126/science.8171320 · Cited by 1,453
Binding mechanisms in selective laser sintering and selective laser melting
Kruth, J., Mercelis, P., Van Vaerenbergh, J., Froyen, L., & Rombouts, M. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573365 · Cited by 1,383
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
Organ printing: computer-aided jet-based 3D tissue engineering
Mironov, V., Boland, T., Trusk, T., Forgacs, G., & Markwald, R. R. (2003) · Trends in Biotechnology · doi:10.1016/s0167-7799(03)00033-7 · Cited by 1,276
Hutmacher, D. W., Sittinger, M., & Risbud, M. V. (2004) · Trends in Biotechnology · doi:10.1016/j.tibtech.2004.05.005 · Cited by 1,121
Leong, K. F., Cheah, C. M., & Chua, C. K. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00030-9 · Cited by 1,076
Inkjet printing of viable mammalian cells
Xu, T., Jin, J., Gregory, C., Hickman, J. J., & Boland, T. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.011 · Cited by 1,035
A comparison of rapid prototyping technologies
Pham, D. T., & Gault, R. S. (1998) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(97)00137-5 · Cited by 915
Mannoor, M. S., Jiang, Z., James, T., Kong, Y. L., Malatesta, K. A., Soboyejo, W. O., Verma, N., Gracias, D. H., & McAlpine, M. C. (2013) · Nano Letters · doi:10.1021/nl4007744 · Cited by 874
Rapid prototyping & manufacturing— Fundamentals of stereolithography
(1993) · Journal of Manufacturing Systems · doi:10.1016/0278-6125(93)90311-g · Cited by 850
Lasers and materials in selective laser sintering
Kruth, J. P., Wang, X., Laoui, T., & Froyen, L. (2003) · Assembly Automation · doi:10.1108/01445150310698652 · Cited by 826
Omnidirectional Printing of 3D Microvascular Networks
Wu, W., DeConinck, A., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201004625 · Cited by 819
Rapid prototyping in tissue engineering: challenges and potential
Yeong, W.-Y., Chua, C.-K., Leong, K.-F., & Chandrasekaran, M. (2004) · Trends in Biotechnology · doi:10.1016/j.tibtech.2004.10.004 · Cited by 807
Application of inkjet printing to tissue engineering
Boland, T., Xu, T., Damon, B., & Cui, X. (2006) · Biotechnology Journal · doi:10.1002/biot.200600081 · Cited by 783
Ko, S. H., Pan, H., Grigoropoulos, C. P., Luscombe, C. K., Fréchet, J. M. J., & Poulikakos, D. (2007) · Nanotechnology · doi:10.1088/0957-4484/18/34/345202 · Cited by 770
Three‐dimensional printing of porous ceramic scaffolds for bone tissue engineering
Seitz, H., Rieder, W., Irsen, S., Leukers, B., & Tille, C. (2005) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30291 · Cited by 742
RepRap – the replicating rapid prototyper
Jones, R., Haufe, P., Sells, E., Iravani, P., Olliver, V., Palmer, C., & Bowyer, A. (2011) · Robotica · doi:10.1017/s026357471000069x · Cited by 736
The Design of Scaffolds for Use in Tissue Engineering. Part II. Rapid Prototyping Techniques
Yang, S., Leong, K.-F., Du, Z., & Chua, C.-K. (2002) · Tissue Engineering · doi:10.1089/107632702753503009 · Cited by 729
Short fiber reinforced composites for fused deposition modeling
Zhong, W., Li, F., Zhang, Z., Song, L., & Li, Z. (2001) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(00)01810-4 · Cited by 721
Chaotic mixing in three-dimensional microvascular networks fabricated by direct-write assembly
Therriault, D., White, S. R., & Lewis, J. A. (2003) · Nature Materials · doi:10.1038/nmat863 · Cited by 707
Guan, J., Fujimoto, K. L., Sacks, M. S., & Wagner, W. R. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.10.018 · Cited by 703
Material Incress Manufacturing by Rapid Prototyping Techniques
Kruth, J. P. (1991) · CIRP Annals · doi:10.1016/s0007-8506(07)61136-6 · Cited by 657
Sood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2009) · Materials & Design · doi:10.1016/j.matdes.2009.04.030 · Cited by 626
Integrated 3D-printed reactionware for chemical synthesis and analysis
Symes, M. D., Kitson, P. J., Yan, J., Richmond, C. J., Cooper, G. J. T., Bowman, R. W., Vilbrandt, T., & Cronin, L. (2012) · Nature Chemistry · doi:10.1038/nchem.1313 · Cited by 617
Scaffold development using 3D printing with a starch-based polymer
Lam, C. X. F., Mo, X. M., Teoh, S. H., & Hutmacher, D. W. (2002) · Materials Science and Engineering: C · doi:10.1016/s0928-4931(02)00012-7 · Cited by 614
Use of stereolithography to manufacture critical‐sized 3D biodegradable scaffolds for bone ingrowth
Cooke, M. N., Fisher, J. P., Dean, D., Rimnac, C., & Mikos, A. G. (2003) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.10485 · Cited by 571
A review of rapid prototyping technologies and systems
Yan, X., & Gu, P. (1996) · Computer-Aided Design · doi:10.1016/0010-4485(95)00035-6 · Cited by 565
Direct writing of copper conductive patterns by ink-jet printing
Park, B. K., Kim, D., Jeong, S., Moon, J., & Kim, J. S. (2007) · Thin Solid Films · doi:10.1016/j.tsf.2006.11.142 · Cited by 555
Tadic, D., & Epple, M. (2004) · Biomaterials · doi:10.1016/s0142-9612(03)00621-5 · Cited by 550
Chiu, D. T., Jeon, N. L., Huang, S., Kane, R. S., Wargo, C. J., Choi, I. S., Ingber, D. E., & Whitesides, G. M. (2000) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.040562297 · Cited by 526
Three-dimensional tissue fabrication
Liu Tsang, V., & Bhatia, S. N. (2004) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2004.05.001 · Cited by 519
Absorptance of powder materials suitable for laser sintering
Tolochko, N. K., Khlopkov, Y. V., Mozzharov, S. E., Ignatiev, M. B., Laoui, T., & Titov, V. I. (2000) · Rapid Prototyping Journal · doi:10.1108/13552540010337029 · Cited by 518
Hydroxyapatite scaffolds for bone tissue engineering made by 3D printing
Leukers, B., Gülkan, H., Irsen, S. H., Milz, S., Tille, C., Schieker, M., & Seitz, H. (2005) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-005-4716-5 · Cited by 499
Configurable 3D-Printed millifluidic and microfluidic ‘lab on a chip’ reactionware devices
Kitson, P. J., Rosnes, M. H., Sans, V., Dragone, V., & Cronin, L. (2012) · Lab on a Chip · doi:10.1039/c2lc40761b · Cited by 484
Chan, V., Zorlutuna, P., Jeong, J. H., Kong, H., & Bashir, R. (2010) · Lab on a Chip · doi:10.1039/c004285d · Cited by 468
Fedorovich, N. E., Alblas, J., de Wijn, J. R., Hennink, W. E., Verbout, A. J., & Dhert, W. J. A. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0175 · Cited by 467
A poly(d,l-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.03.055 · Cited by 437
Selective laser sintering: A qualitative and objective approach
Kumar, S. (2003) · JOM · doi:10.1007/s11837-003-0175-y · Cited by 398
Waldbaur, A., Rapp, H., Länge, K., & Rapp, B. E. (2011) · Analytical Methods · doi:10.1039/c1ay05253e · Cited by 381
Lu, Y., Mapili, G., Suhali, G., Chen, S., & Roy, K. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30601 · Cited by 380
Fabrication of soft tissue engineering scaffolds by means of rapid prototyping techniques
Landers, R., Pfister, A., Hübner, U., John, H., Schmelzeisen, R., & Mülhaupt, R. (2002) · Journal of Materials Science · doi:10.1023/a:1016189724389 · Cited by 367
The rapid prototyping technologies
Upcraft, S., & Fletcher, R. (2003) · Assembly Automation · doi:10.1108/01445150310698634 · Cited by 367
Rapid prototyping or rapid production? 3D printing processes move industry towards the latter
Bak, D. (2003) · Assembly Automation · doi:10.1108/01445150310501190 · Cited by 353
Generation of Three-Dimensional Hepatocyte/Gelatin Structures with Rapid Prototyping System
Wang, X., Yan, Y., Pan, Y., Xiong, Z., Liu, H., Cheng, J., Liu, F., Lin, F., Wu, R., Zhang, R., et al. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.83 · Cited by 353
Slicing procedures in layered manufacturing: a review
Mohan Pandey, P., Venkata Reddy, N., & Dhande, S. G. (2003) · Rapid Prototyping Journal · doi:10.1108/13552540310502185 · Cited by 349
Slicing procedures for layered manufacturing techniques
Dolenc, A., & Mäkelä, I. (1994) · Computer-Aided Design · doi:10.1016/0010-4485(94)90032-9 · Cited by 341
3D printing of bone substitute implants using calcium phosphate and bioactive glasses
Bergmann, C., Lindner, M., Zhang, W., Koczur, K., Kirsten, A., Telle, R., & Fischer, H. (2010) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2010.04.037 · Cited by 311
Lee, K.-W., Wang, S., Fox, B. C., Ritman, E. L., Yaszemski, M. J., & Lu, L. (2007) · Biomacromolecules · doi:10.1021/bm060834v · Cited by 292
LIA handbook of laser materials processing
Jüptner, W. P. O. (2002) · Optics and Lasers in Engineering · doi:10.1016/s0143-8166(01)00176-2 · Cited by 290
Pfister, A., Landers, R., Laib, A., Hübner, U., Schmelzeisen, R., & Mülhaupt, R. (2004) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.10807 · Cited by 284
A review of rapid prototyping (RP) techniques in the medical and biomedical sector
Webb, P. A. (2000) · Journal of Medical Engineering & Technology · doi:10.1080/03091900050163427 · Cited by 276
A 3D printed dry electrode for ECG/EEG recording
Salvo, P., Raedt, R., Carrette, E., Schaubroeck, D., Vanfleteren, J., & Cardon, L. (2012) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2011.12.017 · Cited by 264
Wutticharoenmongkol, P., Sanchavanakit, N., Pavasant, P., & Supaphol, P. (2006) · Macromolecular Bioscience · doi:10.1002/mabi.200500150 · Cited by 254
Conductor microstructures by laser curing of printed gold nanoparticle ink
Chung, J., Ko, S., Bieri, N. R., Grigoropoulos, C. P., & Poulikakos, D. (2004) · Applied Physics Letters · doi:10.1063/1.1644907 · Cited by 252
High Frequency Recording with Electrostatically Deflected Ink Jets
Sweet, R. G. (1965) · Review of Scientific Instruments · doi:10.1063/1.1719502 · Cited by 243
Resorbable Dicalcium Phosphate Bone Substitutes Prepared by 3D Powder Printing
Gbureck, U., Hölzel, T., Klammert, U., Würzler, K., Müller, F. A., & Barralet, J. E. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200700019 · Cited by 233
Real time adaptive slicing for fused deposition modelling
Pandey, P. M., Reddy, N. V., & Dhande, S. G. (2003) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(02)00164-5 · Cited by 230
A 3D Printed Fluidic Device that Enables Integrated Features
Anderson, K. B., Lockwood, S. Y., Martin, R. S., & Spence, D. M. (2013) · Analytical Chemistry · doi:10.1021/ac4009594 · Cited by 229
Self-citation3D Printing and Neurosurgery—Ready for Prime Time?
Klein, G. T., Lu, Y., & Wang, M. Y. (2013) · World Neurosurgery · doi:10.1016/j.wneu.2013.07.009 · Cited by 224
Improving accuracy through shrinkage modelling by using Taguchi method in selective laser sintering
Raghunath, N., & Pandey, P. M. (2007) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2006.07.001 · Cited by 212
Application of Stereolithography for Scaffold Fabrication for Tissue Engineered Heart Valves
Sodian, R., Loebe, M., Hein, A., Martin, D. P., Hoerstrup, S. P., Potapov, E. V., Hausmann, H., Lueth, T., & Hetzer, R. (2002) · ASAIO Journal · doi:10.1097/00002480-200201000-00004 · Cited by 206
Manufacturing of fine-structured 3D porous filter elements by selective laser melting
Yadroitsev, I., Shishkovsky, I., Bertrand, P., & Smurov, I. (2009) · Applied Surface Science · doi:10.1016/j.apsusc.2008.07.154 · Cited by 206
Evaluation of Photocrosslinked Lutrol Hydrogel for Tissue Printing Applications
Fedorovich, N. E., Swennen, I., Girones, J., Moroni, L., van Blitterswijk, C. A., Schacht, E., Alblas, J., & Dhert, W. J. A. (2009) · Biomacromolecules · doi:10.1021/bm801463q · Cited by 202
Choi, J.-W., Wicker, R., Lee, S.-H., Choi, K.-H., Ha, C.-S., & Chung, I. (2009) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2009.05.004 · Cited by 200
Photopolymers for rapid prototyping
Liska, R., Schuster, M., Inführ, R., Turecek, C., Fritscher, C., Seidl, B., Schmidt, V., Kuna, L., Haase, A., Varga, F., et al. (2007) · Journal of Coatings Technology and Research · doi:10.1007/s11998-007-9059-3 · Cited by 197
Warnke, P. H., Seitz, H., Warnke, F., Becker, S. T., Sivananthan, S., Sherry, E., Liu, Q., Wiltfang, J., & Douglas, T. (2010) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31577 · Cited by 192
Laser-Induced Materials and Processes for Rapid Prototyping
Lü, L., Fuh, J. Y. H., & Wong, Y. S. (2001) · Springer eBooks · doi:10.1007/978-1-4615-1469-5 · Cited by 188
Metal nanoparticle direct inkjet printing for low-temperature 3D micro metal structure fabrication
Ko, S. H., Chung, J., Hotz, N., Nam, K. H., & Grigoropoulos, C. P. (2010) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/20/12/125010 · Cited by 183
Kitson, P. J., Symes, M. D., Dragone, V., & Cronin, L. (2013) · Chem. Sci. · doi:10.1039/c3sc51253c · Cited by 180
Laminated object manufacturing for rapid tooling and patternmaking in foundry industry
Mueller, B., & Kochan, D. (1999) · Computers in Industry · doi:10.1016/s0166-3615(98)00127-4 · Cited by 179
3D-printed devices for continuous-flow organic chemistry
Dragone, V., Sans, V., Rosnes, M. H., Kitson, P. J., & Cronin, L. (2013) · Beilstein Journal of Organic Chemistry · doi:10.3762/bjoc.9.109 · Cited by 174
Curodeau, A., Sachs, E., & Caldarise, S. (2000) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200009)53:5<525::aid-jbm12>3.0.co;2-1 · Cited by 173
Novel drug delivery devices for providing linear release profiles fabricated by 3DP
Yu, D.-G., Branford-White, C., Ma, Z.-H., Zhu, L.-M., Li, X.-Y., & Yang, X.-L. (2009) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2008.12.008 · Cited by 170
Numerical prediction of temperature and density distributions in selective laser sintering processes
Bugeda Miguel Cervera, G., & Lombera, G. (1999) · Rapid Prototyping Journal · doi:10.1108/13552549910251846 · Cited by 168
Inkjet printed (bio)chemical sensing devices
Komuro, N., Takaki, S., Suzuki, K., & Citterio, D. (2013) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-013-7013-z · Cited by 164
Zhao, L., Lee, V. K., Yoo, S.-S., Dai, G., & Intes, X. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.004 · Cited by 161
Weiss, P., Obadia, L., Magne, D., Bourges, X., Rau, C., Weitkamp, T., Khairoun, I., Bouler, J. M., Chappard, D., Gauthier, O., et al. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00335-1 · Cited by 160
Huang, W., Zheng, Q., Sun, W., Xu, H., & Yang, X. (2007) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2007.02.021 · Cited by 159
A novel system for fused deposition of advanced multiple ceramics
Jafari, M. A., Han, W., Mohammadi, F., Safari, A., Danforth, S. C., & Langrana, N. A. (2000) · Rapid Prototyping Journal · doi:10.1108/13552540010337047 · Cited by 154
Medical rapid prototyping applications and methods
Hieu, L. C., Zlatov, N., Sloten, J. V., Bohez, E. L. J., Khanh, L., Binh, P. H., Oris, P., & Toshev, Y. (2005) · Assembly Automation · doi:10.1108/01445150510626415 · Cited by 152
Maruo, S., & Ikuta, K. (2002) · Sensors and Actuators A Physical · doi:10.1016/s0924-4247(02)00043-2 · Cited by 151
Rapid prototyping of electrically conductive components using 3D printing technology
Czyżewski, J., Burzyński, P., Gaweł, K., & Meisner, J. (2009) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2009.03.015 · Cited by 151
Rapid prototyping as a tool for manufacturing bioartificial livers
Wang, X., Yan, Y., & Zhang, R. (2007) · Trends in biotechnology · doi:10.1016/j.tibtech.2007.08.010 · Cited by 146
Roy, T. D., Simon, J. L., Ricci, J. L., Rekow, E. D., Thompson, V. P., & Parsons, J. R. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.20034 · Cited by 145
Solid freeform fabrication of metal components using fused deposition of metals
Wu, G., Langrana, N. A., Sadanji, R., & Danforth, S. C. (2002) · Materials & Design (1980-2015) · doi:10.1016/s0261-3069(01)00079-6 · Cited by 144
Interfacial characteristics of composites fabricated by laminated object manufacturing
Klosterman, D., Chartoff, R. P., Graves, G., Osborne, N., & Priore, B. E. (1998) · Composites Part A Applied Science and Manufacturing · doi:10.1016/s1359-835x(98)00088-8 · Cited by 142
Solid Freeform Fabrication Symposium Proceedings
Marcus, H. L., Beeman, J. J., Barlow, J. W., Bourell, D. L., & Crawford, R. (1993) · NASA STI/Recon Technical Report N · Cited by 140
Wu, W., Zheng, Q., Guo, X., Sun, J., & Liu, Y. (2009) · Biomedical Materials · doi:10.1088/1748-6041/4/6/065005 · Cited by 139
Антонов, Е. Н., Bagratashvili, V. N., Whitaker, M. J., Barry, J. J. A., Shakesheff, K. M., Коновалов, А. Н., Popov, V. K., & Howdle, S. M. (2004) · Advanced Materials · doi:10.1002/adma.200400838 · Cited by 136
Influence of process parameters on part shrinkage in SLS
Wang, R., Wang, L., Zhao, L., & Liu, Z. (2006) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-006-0490-x · Cited by 130
Efficient slicing for layered manufacturing
Tata, K., Fadel, G., Bagchi, A., & Aziz, N. M. (1998) · Rapid Prototyping Journal · doi:10.1108/13552549810239003 · Cited by 130
Yu, D., Shen, X., Branford-White, C. J., Zhu, L., White, K., & Xiang, Y. (2009) · Journal of Pharmacy and Pharmacology · doi:10.1211/jpp.61.03.0006 · Cited by 128
On-line temperature monitoring in selective laser sintering/melting
Chivel’, Y. A., & Smurov, I. Y. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.079 · Cited by 126
Processing of Piezocomposites by Fused Deposition Technique
Bandyopadhyay, A. K., Panda, R. K., Janas, V. F., Agarwala, M. K., Danforth, S. C., & Safari, A. (1997) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1997.tb02993.x · Cited by 123
Sailer, H. F., Haers, P. E. J. J., Zollikofer, C. P. E., Warnke, T., Caris, F. R., & Stucki, P. (1998) · International Journal of Oral and Maxillofacial Surgery · doi:10.1016/s0901-5027(98)80059-3 · Cited by 122
Novel 3D collagen scaffolds fabricated by indirect printing technique for tissue engineering
Liu, C., Xia, Z., Han, Z., Hulley, P. A., Triffitt, J. T., & Czernuszka, J. T. (2007) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.30975 · Cited by 117
Getting in touch—3D printing in Forensic Imaging
Ebert, L. C., Thali, M. J., & Ross, S. G. (2011) · Forensic Science International · doi:10.1016/j.forsciint.2011.04.022 · Cited by 117
Li, L., Fuh, J. Y. H., & Wong, Y. S. (2001) · Springer eBooks · doi:10.1007/978-1-4615-1469-5_5 · Cited by 110
Projection Microfabrication of Three-Dimensional Scaffolds for Tissue Engineering
Han, L., Mapili, G., Chen, S., & Roy, K. (2008) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2823079 · Cited by 110
Study of biodegradation behavior of chitosan-xanthan microspheres in simulated physiological media
Chellat, F., Tabrizian, M., Dumitriu, S., Chornet, E., Rivard, C., & Yahia, L. (2000) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200009)53:5<600::aid-jbm21>3.0.co;2-d · Cited by 98
Layered Manufacturing: Current Status and Future Trends
Dutta, D., Prinz, F. B., Rosen, D. W., & Weiss, L. E. (2000) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.1355029 · Cited by 97
Chung, J., Bieri, N. R., Ko, S. H., Grigoropoulos, C. P., & Dimos Poulikakos, A. (2004) · Applied Physics A · doi:10.1007/s00339-004-2731-x · Cited by 92
Oishi, M., Fukuda, M., Yajima, N., Yoshida, K., Takahashi, M., Hiraishi, T., Takao, T., Saito, A., & Fujii, Y. (2013) · Journal of neurosurgery · doi:10.3171/2013.3.jns121109 · Cited by 91
Fabrication of Versatile Channel Flow Cells for Quantitative Electroanalysis Using Prototyping
Snowden, M. E., King, P. H., Covington, J. A., Macpherson, J. V., & Unwin, P. R. (2010) · Analytical Chemistry · doi:10.1021/ac100345v · Cited by 91
Yu, D., Shen, X., Branford-White, C. J., et al. (2009) · Journal of Pharmacy and Pharmacology · doi:10.1211/jpp/61.03.0006 · Cited by 91
Benchtop micromolding of polystyrene by soft lithography
Wang, Y., Balowski, J., Phillips, C., Phillips, R., Sims, C. E., & Allbritton, N. L. (2011) · Lab on a Chip · doi:10.1039/c1lc20281b · Cited by 91
Computer aided decision support for fused deposition modeling
Ziemian, C. W., & Crawn, P. M. (2001) · Rapid Prototyping Journal · doi:10.1108/13552540110395538 · Cited by 83
Vertical bone augmentation with 3D‐synthetic monetite blocks in the rabbit calvaria
Torres, J., Tamimi, F., Alkhraisat, M. H., Prados‐Frutos, J. C., Rastikerdar, E., Gbureck, U., Barralet, J. E., & López‐Cabarcos, E. (2011) · Journal Of Clinical Periodontology · doi:10.1111/j.1600-051x.2011.01787.x · Cited by 78
3D scaffold fabrication with PPF/DEF using micro-stereolithography
Lee, J., Lan, P. X., Kim, B. G., Lim, G., & Cho, D. (2007) · Microelectronic Engineering · doi:10.1016/j.mee.2007.01.267 · Cited by 77
Bellini, A., & Güçeri, S. İ. (2002) · doi:10.17918/etd-22 · Cited by 76
Minocchieri, S., Burren, J. M., Bachmann, M., Stern, G., Wildhaber, J. H., Buob, S., Schindel, R., Kraemer, R., Frey, U., & Nelle, M. (2008) · Pediatric Research · doi:10.1203/pdr.0b013e318175dcfa · Cited by 75
Song, Y., & Koenig, W. (1997) · CIRP Annals · doi:10.1016/s0007-8506(07)60790-2 · Cited by 74
Rapid Product Development in the USA, Europe and Japan
Waterman, N. A., & Dickens, P. (1994) · World Class Design to Manufacture · doi:10.1108/09642369210056629 · Cited by 74
Kwon, I. K., & Matsuda, T. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.06.041 · Cited by 72
Improvement of spatial resolution in nano-stereolithography using radical quencher
Park, S., Lim, T. W., Yang, D.-Y., Kim, R. H., & Lee, K.-S. (2006) · Macromolecular Research · doi:10.1007/bf03218724 · Cited by 70
Made‐to‐measure pattern development based on 3D whole body scans
Daanen, H. A. M., & Hong, S. (2008) · International Journal of Clothing Science and Technology · doi:10.1108/09556220810843502 · Cited by 68
Wozniak, K. J., Rzepecka-Woźniak, E., Moskała, A., Pohl, J., Latacz, K., & Dybała, B. (2012) · Forensic Science International · doi:10.1016/j.forsciint.2012.06.012 · Cited by 64
Paul, B. K., & Voorakarnam, V. (2001) · Journal of Manufacturing Processes · doi:10.1016/s1526-6125(01)70124-7 · Cited by 62
Colour stereolithography for planning complex maxillofacial tumour surgery
Kermer, C., Rasse, M., Lagogiannis, G., Undt, G., Wagner, A., & Millesi, W. (1998) · Journal of Cranio-Maxillofacial Surgery · doi:10.1016/s1010-5182(98)80068-1 · Cited by 57
Reverse Engineering-Rapid Prototyping of the Skull in Forensic Trauma Analysis
Kettner, M., Schmidt, P. M., Potente, S., Ramsthaler, F., & Schrodt, M. (2011) · Journal of Forensic Sciences · doi:10.1111/j.1556-4029.2011.01764.x · Cited by 54
Inkjet printing of bioadhesives
Doraiswamy, A., Dunaway, T. M., Wilker, J. J., & Narayan, R. J. (2008) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31183 · Cited by 49
Coalescence Behaviour of Two Metallic Particles as Base Mechanism of Selective Laser Sintering
Klocke, F., Wagner, C., & Klocke, F. (2003) · CIRP Annals · doi:10.1016/s0007-8506(07)60559-9 · Cited by 48
Wu, W., Zheng, Q., Guo, X., & Huang, W. (2009) · Journal of Wuhan University of Technology-Mater Sci Ed · doi:10.1007/s11595-009-6977-1 · Cited by 44
Laminated object manufacturing of LZSA glass‐ceramics
Gomes, C. M., Travitzky, N. A., Greil, P., Acchar, W., Birol, H., de Oliveira, A. P. N., & Hotza, D. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111184152 · Cited by 43
Patient specific biomodel of the whole aorta - the importance of calcified plaque removal
Håkansson, Rantatalo, Hansen, & Wanhainen (2011) · VASA · doi:10.1024/0301-1526/a000148 · Cited by 43
Coarse-grained, foldable, physical model of the polypeptide chain
Chakraborty, P., & Zuckermann, R. N. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1305741110 · Cited by 41
New model for shrinkage compensation in selective laser sintering
Kumaraguru, S., Pandey, P. M., & Rao, P. V. (2009) · Virtual and Physical Prototyping · doi:10.1080/17452750802393659 · Cited by 37
Jittivadhna, K., Ruenwongsa, P., & Panijpan, B. (2010) · Biochemistry and Molecular Biology Education · doi:10.1002/bmb.20427 · Cited by 34
Harris, R. A., Hague, R., & Dickens, P. (2003) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2003.08.007 · Cited by 33
Fundamental study and theoretical analysis in a constrained-surface stereolithography system
Huang, Y., Kuriyama, S., & Jiang, C. (2004) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-003-1627-9 · Cited by 31
Chemical creativity with 3D printing
Johnson, R. D. (2012) · Nature Chemistry · doi:10.1038/nchem.1333 · Cited by 30
Bertsch, A., & Renaud, P. (2011) · Springer eBooks · doi:10.1007/978-0-387-92904-0_4 · Cited by 27
Rapid prototyping for neuroscience and neural engineering
Tek, P., Chiganos, T. C., Mohammed, J. S., Eddington, D., Fall, C. P., Ifft, P. J., & Rousche, P. J. (2008) · Journal of Neuroscience Methods · doi:10.1016/j.jneumeth.2008.03.011 · Cited by 26
Tangible virtuality—perceptions of computer-aided and physical modelling
Breen, J., Nottrot, R., & Stellingwerff, M. (2003) · Automation in Construction · doi:10.1016/s0926-5805(03)00053-0 · Cited by 24
A versatile sample holder for single plane illumination microscopy
Desmaison, A., Lorenzo, C., Rouquette, J., Ducommun, B., & Lobjois, V. (2013) · Journal of Microscopy · doi:10.1111/jmi.12051 · Cited by 22
Construct hepatic analog by cell-matrix controlled assembly technology
Liu, H., Yan, Y., Wang, X., Cheng, J., Lin, F., Xiong, Z., & Wu, R. (2006) · Chinese Science Bulletin · doi:10.1007/s11434-006-2045-9 · Cited by 12
Chuck Hull: Pioneer in Stereolithography
SPIE (2013) · SPIE Professional · doi:10.1117/2.4201301.03 · Cited by 10
Making ordered DNA and protein structures from computer‐printed transparency film cut‐outs
Jittivadhna, K., Ruenwongsa, P., & Panijpan, B. (2009) · Biochemistry and Molecular Biology Education · doi:10.1002/bmb.20299 · Cited by 8
“Bochdalek’s” skull: morphology report and reconstruction of face
Klepáček, I., & Malá, P. Z. (2012) · Forensic Science Medicine and Pathology · doi:10.1007/s12024-012-9375-5 · Cited by 8
Research works printed but not linked: 21
- Leukers B., 2005, J. Mater. Sci.: Mater. Med., 16, 1121
- Lipton, J.; Arnold, D.; Nigl, F.; Lopez, N.; Cohen, D.; Noren, N.; Lipson, H.InSolid Freeform Fabrication Symposium, 2010.
- Campbell J., 2005, J. Text. Apparel, Technol. Manage., 4, 1
- Pan, Y.; Zhou, C.; Chen, Y.InProceedings of the 2012 International Manufacturing Science and Engineering Conference, 2012; pp4–8.
- Takagi, T.; Nakajima, N.InMicro Electro Mechanical Systems, 1993, MEMS’93, Proceedings An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems, Fort Lauderdale, FL, February 7–10, 1993; pp173–178.
- Ikuta, K.; Hirowatari, K.InMicro Electro Mechanical Systems, 1993, MEMS’93, Proceedings An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems, Fort Lauderdale, FL, February 7–10, 1993; pp42–47.
- Strutt J. W., 1879, Tr. Mat. O-va, 4
- Waldbaur A., 2011, Anal. Methods, 3, 2681, 10.1039/c1ay05253e · DOI · Paper page
- Landers R., 2002, J. Mater. Sci., 37, 3107, 10.1023/A:1016189724389 · DOI · Paper page
- Kruth, J.P.; Levy, G.; Schindel, R.; Craeghs, T.; Yasa, E.InProceedings of the 3rd International Conference on Polymers and Moulds Innovations, 2008; pp15–30;
- Van Weeren, R.; Agarwala, M.; Jamalabad, V.; Bandyophadyay, A.; Vaidyanathan, R.; Langrana, N.; Safari, A.; Whalen, P.; Danforth, S.; Ballard, C.InProceedings of the Solid Freeform Fabrication Symposium;ASME:New York, 1995; pp314–321.
- Agarwala, M.; Van Weeren, R.; Bandyopadhyay, A.; Whalen, P.; Safari, A.; Danforth, S.InProceedings of Solid Freeform Fabrication Symposium, The University of Texas, Austin, TX, August 12–14, 1996; pp385–392.
- Frank, M. C.; Peters, F. E.; Karthikeyan, R.24th Annual International Solid Freeform Fabrication Symposium–An Additive Manufacturing Conference, The University of Texas at Austin, Austin, TX, 2010.
- Flach, L.; Jacobs, M. A.; Klosterman, D. A.; Chartoff, R.InSolid Freeform Fabrication Symposium Proceedings, University of Texas at Austin, Austin, TX, 1998; pp407–416.
- Leukers B., 2005, Mater. Sci. Eng. Technol., 36, 781
- Mironov V., 2003, Trends Biotechnol., 21, 151, 10.1016/S0167-7799(03)00033-7 · DOI · Paper page
- Tam M. D., 2012, Radiol. Case, 6, 31
- Klepacek I., 2012, Forensic Sci. Med. Pathol., 8, 451
- Noecker A. M., 2006, Pediatr. Circ. Support Perfusion, 52, 349
- Waldbaur A., 2011, Anal. Methods, 3, 2681, 10.1039/c1ay05253e · DOI · Paper page
- Mathieson J. S., 2013, Beilstein J. Org. Chem., 4, 285
Cited by
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
3D printing with polymers: Challenges among expanding options and opportunities
Stansbury, J. W., & Idacavage, M. J. (2016) · Dental Materials · doi:10.1016/j.dental.2015.09.018 · Cited by 1,732
Fundamentals and applications of 3D printing for novel materials
Lee, J.-Y., An, J., & Chua, C. K. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.02.004 · Cited by 1,354
The upcoming 3D-printing revolution in microfluidics
Bhattacharjee, N., Urrios, A., Kang, S., & Folch, A. (2016) · Lab on a Chip · doi:10.1039/c6lc00163g · Cited by 1,123
Metadata
- Authors
- Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M.
- Affiliations
- Michigan State University (US)
- Corresponding author
- Spence, Dana M.
- Venue
- Analytical Chemistry
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-01-30
- Volume
- 86
- Issue
- 7
- Pages
- 3240-3253
- ISSN
- 0003-2700 (ISSN-L)
- 1520-6882
- OpenAlex
- W2043704558
- Cited by
- 1,746
- References
- 162
- Citations by year
- 2026: 58 · 2025: 93 · 2024: 130 · 2023: 141 · 2022: 152 · 2021: 154 · 2020: 167 · 2019: 187 · 2018: 224 · 2017: 192 · 2016: 141 · 2015: 83 · 2014: 23
- Type
- other
- Language
- en
- Open access
- closed
- Locations
- Analytical Chemistry (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Engineering › Biomedical Engineering › Anatomy and Medical Technology
- Social Sciences › Education › Various Chemistry Research Topics
- Keywords
- 3D printing, additive manufacturing, biotechnology, chemical sciences, laboratory applications, printing technology, history of 3D printing, research laboratories, teaching laboratory
- MeSH terms
- Biotechnology, Chemistry, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.